Can't figure out why "Offline" Pls -Help!

I am running a HP Officejet Pro k5400 Series on a network through a print server running Windows Server 2008 64bit. I have the printer installed and configured and was working fine however, now it is offline and I cannot figure out why. I have redirects and they work fine. The diagnositc shows that it is fine and "ready". Yet if I try to print to the actual printer, not one of the redirects, I eventually get a message that the printer is offline. If it's a network issue then the redirects shouldn't be working either! What am I missing?????

Here is a good article on things you can do.http://discussions.apple.com/docs/DOC-4032 You should back up your drive in case you need to do a clean install. Adding more ram can also help. Check in disk utilities and repair permissions. Also look and see how much free space you have. As a rule the minimum is 10%, more is better. If you have some large apps putting them on an external dive can free up you start up volume.

Similar Messages

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

HT4993 When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

Apex bug? Items being cleared in session state - can't figure out why

I have an item that is being submitted with a value but is then being overwritten and set to null. I can't see any reason why the submitted value is being overwritten with null.
I have been debugging this problem for most of the day and can't figure out what is happening and was hoping someone in the forum might be able to shed some light.
Some details:
The item is on Page 0, has source type of "PL/SQL Expression or Function", a source expression of "V('REQUEST')", and Source Used = "Always".
I viewed the HTML source of the rendered page and can see the following HTML, so I know the item has a value when the page is rendered:
<input type="hidden" id="RENDER_REQUEST" name="p_t08" value="EDIT" />
I have used Firebug to view the HTTP POST body and can see that p_t08 is being correctly submitted with a value of "EDIT" in the post body.
When I run the page in debug mode and then view the debug log, I see that Apex is indeed setting this item to null:
     0.01500     0.01600     A C C E P T: Request="WIZ_NEXT"
     0.23400     0.00000     Session State: Save form items and p_arg_values
     0.24900     0.01600     ...Session State: Save "BRANCH_TO_PAGE_ID" - saving same value: ""
     0.24900     0.00000     ...Session State: Save "ROWS_PER_PAGE" - saving same value: ""
     0.26500     0.01500     ...Session State: Save "P0_CLEAR_WS" - saving same value: ""
     0.26500     0.00000     ...Session State: Saved Item "RENDER_REQUEST" New Value=""
I can't figure out why the item is being set to null.
This problem also does not occur on every page. The pages in question are a multi-step "wizard" that allows the user to navigate between steps with "Next" and "Previous" buttons. Since this is a page 0 item, it appears on every page in the wizard so I'd expect it to behave the same. When you open the wizard at step 1 and press next to go to step 2, the item (RENDER_REQUEST) is set correctly on step 2 of the wizard, BUT when you then click Next to go to step 3, RENDER_REQUEST is null on step 3. If you open the wizard at step 2 and press Next, RENDER_REQUEST is null on step 3.
I did find a work around, but it doesn't make any sense why it would work: if I move the RENDER_REQUEST item from the "Footer Items" region to a page level item (by using Edit All and setting its region to blank), then the problem goes away. If I move it back to the "Footer Items" region the problem reoccurs.
I am working on Application Express 4.0.2.00.07 on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0.
Any help would be greatly appreciated!
Thank you.

Hi Patrick,
Thanks for the quick response. Unfortunately, I can't reproduce this on apex.oracle.com due because the app requires PL/SQL packages to be installed in several schemas, including some that require system grants (I gave a presentation at Oracle Open World a couple of years ago on some of the techniques I used in building this application that you attended; I think the session was called "Building Large Commercial Applications with Oracle Database 11g and Oracle Application Express").
Is there another way we can work together to debug this without reproducing it apex.oracle.com? For example, if you could send me an instrumented version of the APEX_040000.F procedure (or whatever procedure is clearing the session state) that has some additional APEX_APPLICATION.DEBUG calls, I could install it on my server, reproduce the error and send you the output.
Thank you,
Eric

I can't figure out why this page splits in live preview... but not in the browser?

I've finally got my site up and it all runs great... except I can't figure out why this one page behaves like it's too wide.
http://www.johnnez.com/mainbooks.html
It comes apart in the Live Preview.... but not in the browser preview.
Thanks for any tips...
jn

john nez wrote:
HTML is a total incrutable mystery to me... a mystery inside a mystery inside a mystery!
Sounds to me like you've almost cracked it!
You have one error that could cause problems and that's the stray </blockquote> tag. Just delete it.
The alt="" text will show as an error on the validator but that's easy to fix and worth doing.
Here's an easy article on that: http://www.456bereastreet.com/archive/200412/the_alt_and_title_attributes/
In one of your CSS files (JonzheaderindexCSS.css) you have this:
body {
margin-top: 20px;
padding: 0;
color: #666;
font-family: Verdana, Geneva, sans-serif;
font-size: 14px;
line-height: normal;
background-attachment: fixed;
background-color: #E1B852;
background-image: url(../images/orange%20plaid.jpg);
background-repeat: repeat;
html { overflow-y: scroll; }
It should be like this:
html {
overflow-y: scroll;
body {
margin-top: 20px;
padding: 0;
color: #666;
font-family: Verdana, Geneva, sans-serif;
font-size: 14px;
line-height: normal;
background-attachment: fixed;
background-color: #E1B852;
background-image: url(../images/orange%20plaid.jpg);
background-repeat: repeat;
It looks like you have that rule repeated further down the page like this:
html { overflow-y: scroll; }
There's an extra curly brace there (}) anyway, so it is badly formed but the whole rule and extra curly brace can go.
You can fix those errors but I have a sneaky suspicion that it isn't gong to solve the issue you describe.
Fix those issues anyway and post back. Maybe if you can show a screen shot of what you are seeing in DW it might help?
Martin
PS: It's never a good idea to have file names on the web that have spaces in. Your background rule has this:
background-image: url(../images/orange%20plaid.jpg);
That .jpg should be orangeplaid.jpg or orangePlaid.jpg or orange_plaid.jpg and the change should be reflected in the reference to the image so, orangePlaid.jpg should be:
background-image: url(../images/orangePlaid.jpg);

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

I'm staying at my house in Peru, South America. From my PC laptop I can see my neighbor's wifi service network, but I also have my mini iPad and I can not figure out why I can't get any wifi connection from my area. Is there a setting I need to do?

Yes, I did try to go on my settings>wifi and was waiting for any wifi signals to pick up, but nothing shows up. But on my PC I get a whole list of networks to choose from. Regarding my neighbor, I already have her password that is why I was able to get it on my PC, the problem is that the mini Ipad is not picking any signal neither can it locate me when I go to maps.

I tried to Skype someone but I can't see them but they can see me and I can't figure out why?

I tried to Skype somebody and they can see me but I can't see them and I can't figure out why?

I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc and try to repair the drive. Then try the upgrade again.

Can't figure out why I'm dropping frames during capture

I'm dropping frames when capturing 1-hour Mini DV tapes and I can't figure out why.
I'm capturing on a Mac Pro (Early '08) with 8 GB of memory running FCP 7.0.3 and OS X 10.6.6. I'm capturing to a 4 TB G-Speed eS (eSATA) formatted as RAID 5 (Non-Journaled Extended) with about 750 GB of remaining space. I'm capturing via FireWire with a Canon GL-2. This should be a breeze for this system.
I've run Apple Disk Utility, Disc Warrior 4 and Techtool Pro 5 on the drives and they seem to be fine. I've unplugged all USB and FireWire devices besides the keyboard and mouse. No virus protection or background utilities are running. I've trashed preferences. AJA System Test shows a 286 MB/s write speed and 254 MB/s read speed. Blackmagic Disk Speed Test shows a 312 MB/s write speed and a 379 MB/s read speed. No other applications besides FCP are running. I edit 1080p HD footage on this system all day long with no issues but when I try to capture DV SD footage, I run into issues.
The dropped frames error does not ever occur in the same place on the tapes. The tapes are brand new and don't seem to have any time code issues. The only thing I haven't done is to defragment the hard drives. I wouldn't think that capturing simple DV video would be that demanding; the defragment for a 4 TB RAID would likely take 2 or 3 days.
Any other ideas on what's going on and how to try to fix it? Thanks!

Thanks for the prompt reply, Studio X. Yes, I'm using FireWire Basic and no other FireWire devices. I've switched FireWire cables, although I doubt that's the issue as the cable I was using was brand new and fit snuggly. Unfortunately, I don't have an alternate playback device right now. Would switching to Non-controllable device capture settings be worth a try?

All of a sudden my new iphone will not hold a charge even when it is not being used and I can't figure out why???

my battery drains even when iphone is not being used. It is a relatively new phone and this battery draining just started and I can't figure out why????

Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts?

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts? I have closed everyting I can, even took the phone to Verizon and they are not sure what is going on. My company email is active and pushes to the phone....I use Safari regularly to look up stuff for personal and work use. I am on Facebook but have turned it off in notifications. Four phones and a hotspot on the account....we have 6g and have never come close to it, until lately and it's my phone that's eating up the gigs. So what the heck is going on?

Go to Settings/Cellular and you can see how much data each app is using. You can Reset Statistics, then track all of the apps data usage.

I'm trying to make an in app purchase and it keeps telling me to come to the support page but I can't figure out why it won't let me do it

I'm trying to make an in app purchase and it keeps telling me to come to the support page but I can't figure out why it won't let me do it

And I have gone to the support and it was no help

I can't figure out why my reverb and echo things are greyed out

I can't figure out why my reverb and echo things are greyed out on the bottom right of my screen with the edit tab open for the track. I was going to put a screenshot in here but I couldn't figure it out. I one can understand what I mean. Thank you.

bennirubber wrote:
reverb and echo things are greyed out on the bottom right of my screen
http://www.bulletsandbones.com/GB/GBFAQ.html#effectsdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen)

Can't figure out why my navbar gets all pixelated online?

Hi Everyone,
I'm designing a floating site. My workflow is PS=====>Fireworks====>Dreamweaver. I made a navbar in FW with a transparent background and exported html to dreamweaver. I inserted the fireworks htm, put it online and it looks terrible. You can see it here:
http://www.njtraininggrounds.com/thirddaydesign.com/identity.html
Don't worry about the portfolio button, I know what's going on there. But I can't figure out why there is "stairstepping" on the logo and on all the navbar buttons. This is the first time I've ever created a floating site. I just put a jpeg for repeat using the dreamweaver css, and then inserted the rest in a table.
Could anyone give me an idea of what I'm doing wrong? Thanks so much.
Wil

There's no problem with using PNG8, PNG24, or PNG32, other than the huge
weight of the latter two. But there's no need to go PNG here.
Personnaly I see only advantages in using PNG. The good thing about using PNG for graphics like this is that it does not tie you to a background with a certain color. like a GIF with a colored matte does. Should you wish to change your background color later you can keep on using your menu buttons. There is no need to prepare new graphics for the menu just because you change a background color or image.
As for the "huge" weight of the PNG file, I'd say that depends on your definition of "huge"
If you compare the filesizes of a simple graphic like that, I see no big improvement by using GIF.
see screenshot:

Can't figure out why my zoom into stills shakes

I have been using keyframes to create zooms and pans over pics, but every once in a while one of the pics shakes while it's moving. I can't figure out why this happens- any ideas? THANKS

What you might be experiencing is a scaling issue: you're not really zooming into a picture but actually scaling it. Keep in mind DV is a 4:3 ratio. And your photos probably aren't. Scaling an image is shifting the pixels in an image and so if you're making the picture grow or shrink, you're shifting those pixels and that's could be what you are seeing. What size are your pictures? Are they huge, like twice the size of your standard 720 x 480 DV?
If your photo images are extremely large (like 2838 x 2205, 300 dpi) you might try opening them up in a program like Photoshop and making a smaller version. You can force the results to be 4:3 by using the Crop tool. Be sure to adjust the Crop settings to something like 1440 px x 960 px , 72 dpi (double 720 x 480 so you can still scale) and then Crop the photo. Keep in mind, you might lose some of the photo because it isn't 4:3, so use Crop judiciously. Save the resulting image as something else and try using it instead of the original. Be sure to _render the results in the Timeline_ even though Final Cut may refer to it as a real-time effect.
Also you should only have four total keyframes: a keyframe for the starting Scale size and a keyframe for the starting Center position. Then you should have a keyframe for the ending point for both Scale and Center where the image in Final Cut's Canvas window is either larger or smaller. That's it. If you have any other keyframes in-between these four, you can have problems-- which show up as the image moving around, hesitation, or some other unwanted movements.
Good luck!

Can't figure out why "Offline" Pls -Help!

Similar Messages

Maybe you are looking for