Can't find any discussions on this. Suddenly cannot stream video in Safari or Chrome on my iPad 2. The error is "The operation could not be completed." Rebooted cable modem and router, no luck. No problem with my PC. Help!
Suddenly I cannot stream video on my iPad 2. I get the error, "The operation cannot be completed." The browser (Safari or Chrome) continues to try to load the video with no result. I have no problem streaming on my WIndows PC (laptop) using the same WiFi router (Netgear dual band) connected to my Comcast/Xfinity cable modem. I have tried renewing my lease, clearing apps out of memory and rebootng the iPad, still no luck. (How do you do a "hard reset", I forgot?) Frustrating since I don't own a TV and am an Al Jazeera addict! Help!
Suddenly I cannot stream video on my iPad 2. I get the error, "The operation cannot be completed." The browser (Safari or Chrome) continues to try to load the video with no result. I have no problem streaming on my WIndows PC (laptop) using the same WiFi router (Netgear dual band) connected to my Comcast/Xfinity cable modem. I have tried renewing my lease, clearing apps out of memory and rebootng the iPad, still no luck. (How do you do a "hard reset", I forgot?) Frustrating since I don't own a TV and am an Al Jazeera addict! Help!
Similar Messages
-
I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.
amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive -
i updated my ipod the other day and since i have been unable to open any apps that connect to the internet, its says "operation could not be completed. invalid argument". anybody help please?
Have yu tried the standard fixes:
- Reset the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Restore the iPod via iTunes, First from backup and if problems persist, restore to factory defaults/new iPod. -
Does anyone else have this problem?? Please help. I've done everything I know how and the "support" forums here from the website itself have been absolutely no help
Try this link...
http://support.apple.com/kb/ts3424 -
I just bought a new iMac and am having troubles downloading creative cloud installer. Its coming up with error 214 - I can't find any solutions for this. Can anyone help me? Im on mac OS 10.9.4
Meg81 error 214 indicates a download data validation error. This means that the update you downloaded became corrupted likely during the download process. I would recommend utilizing the suggestions listed in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html to attempt to improve the stability of your Internet connection.
You can also find information on how to review your download logs which may provide additional information regarding the failure of the download. -
My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?
carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read. -
When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?
This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry -
I've recently upgraded to the new software (5.1), since then the iTunes doesn't recognize my iphone, as the error comes up:' iTunes could not connect to this iPhone because an unknown error (ex8000022).
Are you guys facing the same problem?
Let me know your opinions, solutions and even problems.
Thank You !http://support.apple.com/kb/HT4137
How to restore as new.
and this for itunes message
http://support.apple.com/kb/HT1808 -
Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
OttoTips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress) -
I'm trying to clean my mailbox and when I click on delete or highlight and move to trash I get a message that says "operation could not be completed - file exists. Further, when I select a message or group of messages, one of them is copied (not deleted) to the trash folder. Can someone help me through this?
Thanks.It's a POP account. I decided to clean up my mailbox today after noticing the computer was real slow after USA Today started sending their daily top stories with new graphics. Also before I noticed the problem with mail deletion - two things happened. 1) I updated security sofware as prompted by Apple and 2) downloaded Mackeeper and went throught some preliminary scans but did not buy their package. Thanks forn nstaying with me.
-
Every time I go to create a new project in the latest version of iMovie for mac OS X yosemite, I get the following information. "The operation could not be completed. No further information is available about the problem.
I have tried restarting the computer, that didn't work. I also tried also, to reinstall the app. That didn't work. I even tried updating all the software, and that still didn't work. I am very frustrated and feel the mac was not a good gift, if a major essential app will refuse to work. Nothing I do, seems to work.Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?
https://discussions.apple.com/thread/6219522
-
Bought i movie for my macbook pro. it crashed, now i can't use it "The operation could not be completed. No other information is available about the problem." any suggestions?
Same problem!
-
The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.
my os is windows 7. elements 12 worked fine for many months then save for the web stopped working
-
I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries
Maybe you are looking for
-
My mac book fell of my desk yesterday. All seems well, but I noticed today that the dvd drive is not working properly, it seems to want to keep ejecting the disk even when the disk is out, and it won't accept dvd's any more. Any suggestions o fellow
-
Hi, I am making a Desktop Application using a JDesktopPane. I want to allow my users to cycle between internal frames quickly by pressing CTRL-TAB. I created the Action object and set its accelerator value, but the action refuses to trigger when i pr
-
Remote SQL Server weird semaphore timeout period error
I'm using SQL Server Express 2012 in a home server using no-ip service. I tried to setup home server to allow remote so I can access home server in my office. after following a walkthrough, I can register my server to Registered Servers, and tried a
-
Newbie: standalone java AQ client
Hello. I need to write content from the java program to the Oracle 10g queue. I can get acquire the datasource in multiple ways (via DriverManager, Spring's dataSource support classes or from running local OCJ4 via jndi) and than do the following : Q
-
I know that MobileMe has been inactive for some time, but a message pops up on my screen every 10 minutes telling me that I have "entered an invalid MobileMe member name or password." I can't remember my password, and cannot get the messages to stop.