Can't find anywhere to select ethernet connection on Bondi Blue iMac

I have the second version of the Bondi Blue iMac. I am trying to transfer files from this computer to an eMac on a private ethernet network. Ethernet does not show up in the Apple System Profiler or under TCP/IP. I do have an ethernet cable hooked up, but I can't get it working on the iMac.

Scapesuiter is correct.
A plain old ethernet cable won't work. You need a ethernet crossover cable or a ehternet hub or router.
See http://docs.info.apple.com/article.html?artnum=106658
Mike

Similar Messages

  • My Mac can't find the server when I connect to cable internet.

    My Mac can't find the server when I connect to cable internet. Ethernet is fine, the problem is that Safari doesn't open the login/password window. Can anybody help?

    The system administrator of my network has had the following solution - to help open the window for the login/password I tick "web proxy" (and enter the information for web proxy server) in "network preferences - advanced - proxies", enter the login/password and then untick it to open webpages. A little complicated, but it works, and that's the only solution so far.

  • I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

    I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

    Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
    http://support.apple.com/kb/HT1365
    For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
    I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
    Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device.

  • How can I find exact username if I connected with sysdba privilege?

    I granted sysdba privilge to a database user. I can connect that user as sysdba. From that users session, 'show user' command showing "SYS" and also username from v$session is also showing "SYS". How can I find actual username used for connecting the database as sysdba?
    Steve Abraham

    user10247588 wrote:
    Thanks for the replay..
    But my requirement is that in our production system auditors want to give separate username for each administrators (they are not recommending sys and system).
    Normal dba privilege is not a problem. But for sysdba privilege every users are showing the user "SYS". How we can I identify which user is login to the database for a particular work if they connected as sysdba. How can I find which user did that (not just want the username "SYS", because all the administrators are identified by sys if they are connected as sysdba). If auditing is enabled how can I find the exact username. Because we are planning to give sysdba privilege to some of the administrators.
    Also, is there any option to find the username, if one user is initiate shutdown of the database?First Please close the thread and keep questioning in only one thread.
    then do not connect as sysdba

  • I am now using the free 1 month CC trial. I got a free one year licence with a camera. I have a product key 24 characters long with numbers and letters. I can't find anywhere to put this key to activate the account? Using a PC, windows 8.

    I am now using the free 1 month CC trial. I got a free one year licence with a camera. I have a product key 24 characters long with numbers and letters. I can't find anywhere to put this key to activate the account? Using a PC, windows 8.

    Redemption Code Help
    Mylenium

  • Hi folks, can someone help me with my redemption code? have a creative cloud id made last week. but in order to install my products I have a redemption code needed but that I can't find anywhere. can someone help me??? Thank you

    Hi folks, can someone help me with my redemption code?
    have a creative cloud id made last week.
    but in order to install my products I have a redemption code needed but that I can't find anywhere. can someone help me???
    Thank you

    I have a fully companies annual subscription of 69.99 a month.
    but I can only download the 30-day trial versions.
    and if I want to put on them completely firedamp should I enter a redemption code. could it be that the code later emailed word?
    Met vriendelijke groet,
    Dave Dros
    Van: "hans-g." <[email protected]<mailto:[email protected]>>
    Beantwoorden - Aan: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Datum: dinsdag 21 oktober 2014 10:03
    Aan: iMac <[email protected]<mailto:[email protected]>>
    Onderwerp:  Hi folks, can someone help me with my redemption code? have a creative cloud id made last week. but in order to install my products I have a redemption code needed but that I can't find anywhere. can someone help me??? Thank you
    Hi folks, can someone help me with my redemption code? have a creative cloud id made last week. but in order to install my products I have a redemption code needed but that I can't find anywhere. can someone help me??? Thank you
    created by hans-g.<https://forums.adobe.com/people/hans-g.> in Adobe Creative Cloud - View the full discussion<https://forums.adobe.com/message/6850359#6850359>

  • HT1420 I can't find anywhere on iTunes that it will let me authorize my computer...help!

    I can't find anywhere on iTunes that it will let me authorize my computer...help!

    I had this problem too.if you look at the top left of your page when you are in your itunes account there is a little square.click on this and you have the 'store' option avaaiable to you.

  • I can't find anywhere MacBook air A1237 1.8GHz Logic board 820-2179-C help, please I need it

    I can't find anywhere MacBook air A1237 1.8GHz Logic board 820-2179-C - please help me

    http://www.ifixit.com/MacBook-Parts/MacBook-Air-1-8-GHz-Original-Logic-Board-/IF 188-007?utm_source=ifixit_cart&utm_medium=cart_product_link&utm_content=product_ list
    If you're into DIY projects I recommend bookmarking IFixIt.com as more often then not they'll have the part you're looking for on an Apple computer.

  • Where can i find .properties file for jco connection?

    For jco connection to SAP, we need .properties file. Is this file already contained in Exchange Profile or somewhere??
    If yes, where can i find .properties file for jco connection or what is the path to this file?
    OR, do we have to create manually??
    Any help is appreciated.
    Thanks.
    Karma

    Hi Karma,
    Please take a look at these..
    Where to set up the JCO connection?
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/42e13d82fcfb34e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_webas620/helpdata/en/bc/42e13d82fcfb34e10000000a114084/content.htm
    cheers,
    Prashanth

  • After upgrading the itunes, I can not find my ipad when it connects to the PC

    After upgrading the itunes, I can not find my ipad when it connects to the PC
    Before that, I can see an botton said my ipad. And then I can click it to operate my ipad

    Try this
    Go into the control panel. Add/remove programs. Uninstall iTunes, Apple mobile device service, apple application support. Then go out and redownload and reinstall iTunes and try again.
    There seems to be a glitch with a recent update and one way to overcome it is to just start over. If that doesn't work there are more in depth things you can do.

  • Hello.  i have a 2011 iMac G4 with OSX10.9.2  and I can't find AirPlay .   is it on this version of iMac?  i just got a new soundsystem expecting to connect via AirPlay

    hello.  i have a 2011 iMac G4 with OSX10.9.2  and I can't find AirPlay .   is it on this version of iMac?  i just got a new soundsystem expecting to connect via AirPlay but don't know where to find it....?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • Can't find resource when establish iiop connection to 8i

    Finally I finished the hellocorba project. When I try to deploy
    to 8i, another problem (I had submitted to oracle support 3 days
    ago, haven't got answer)still persist: I tried to establish iiop
    connection to 8i, which reside in an solaris machine (while
    jdeveloper in NT), jdeveloper give me the message: Can't find
    resource. The Jdbc connection to 8i is OK. I can also run corba
    application in Solaris. What could be wrong? Please help! Thank
    you very much. Eric Liu
    null

    Hi
    See if it helps by adding an entry of the solaris machine in the
    local hosts file.
    Also check an message posted with subject 'How to get IIOP to
    work with port 2481' It has very useful info.
    regards
    raghu
    Eric Liu (guest) wrote:
    : Finally I finished the hellocorba project. When I try to deploy
    : to 8i, another problem (I had submitted to oracle support 3
    days
    : ago, haven't got answer)still persist: I tried to establish
    iiop
    : connection to 8i, which reside in an solaris machine (while
    : jdeveloper in NT), jdeveloper give me the message: Can't find
    : resource. The Jdbc connection to 8i is OK. I can also run corba
    : application in Solaris. What could be wrong? Please help! Thank
    : you very much. Eric Liu
    null

  • EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC.  It used to show up on left side and I would slide podcasts right over to it for years,

    EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC.  It used to show up on left side and I would slide podcasts right over to it for years,  I have installed 3x with removing old install.  I also can hear a constant throbbing sound in spkrs. when Itunes turned on, pls advise.

    Hi Becki ..
    You need to "authorize" the Mac.
    Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
    Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
    More details here >  iOS: Syncing with iTunes

  • I've purchased items on my phone which I had on my laptop but didn't get a chance to download on to my iPod, now I can't find anywhere. Can't buy them again because it says i've already purchased them. Any help?

    I've purchased items on my phone which I had on my laptop but didn't get a chance to download on to my iPod, now I can't find anywhere. Can't buy them again because it says i've already purchased them. Any help?

    I've only been able to get the coaching runs to work on my iPod Nano. They don't work on my iPod Touch or my iPhone.

  • How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now

    How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now and I only purchased my new iMac in December 2012
    Thanks....

    Launch Keychain Access and click on Login in the left hand pane and then on Passwords.  Next do search for Apple in the search field at the top and click on Apple ID Authenicication in the list that comes up.  That will give you the ID no. and password.
    OT

Maybe you are looking for

  • Web Service Error - No Result Tree to Report On

    After successfully creating a web service reference and then using the 'Form and Report on Web Service' wizard I get an error, after defining the input items, at the 'Web Service results' Stage. It states : "No Result Tree to Report On This Web servi

  • Batching SaveAs in CS6 will not save PDF Compatible

    So I'm using a script that I wrote to bring in files that were converted from CorelDraw to EPS (this is the best conversion process to preserve text and drawing assets).  Basically the script takes the art in the EPS, groups it, places a rectangular

  • Imported object in development system is not changeable

    Hi experts, I just transported a RFC from sandbox to development via file transfer. Once imported, the RFC is not modifiable in the development system. Why is that so? The object which are created in developement is changeable but the one transported

  • Does anyone understand this stuff?

    Can someone help me with this. I have been telephoning, messaging and reporting faults for about a month now but I am still having major problems with my broadband speed. My husband have to take turns going on line as if I try to get my emails his vi

  • Spam or junk mail

    Hi, How can i get rid of my junk mail coming to both my iMAC and Iphone mailbox? is there any efficient software? Thanks. Amine