Can't find certificate that appears on Chrome

Hi all, I have a problem and need some help. When I try to connect to Gmail, I get the following error
Cannot connect to the real mail.google.com
Something is currently interfering with your secure connection to mail.google.com.
Try to reload this page in a few minutes or after switching to a new network. If you have recently connected to a new Wi-Fi network, finish logging in before reloading.
If you were to visit mail.google.com right now, you might share private information with an attacker. To protect your privacy, Chrome will not load the page until it can establish a secure connection to the real mail.google.com.
LessReload
What does this mean?
mail.google.com normally uses encryption (SSL) to protect your information. When Chrome tried to connect to mail.google.com this time, mail.google.com returned unusual and incorrect credentials. Either an attacker is trying to pretend to be mail.google.com, or a Wi-Fi sign-in screen has interrupted the connection. Your information is still secure because Chrome stopped the connection before any data was exchanged.
Network errors and attacks are usually temporary, so this page will probably work later. You can also try switching to another network.
Technical details
mail.google.com has asked Chrome to block any certificates with errors, but the certificate that Chrome received during this connection attempt has an error.
Error type: HSTS failure
Subject: FG600B3908600560
Issuer: FG600B3908600560
Public key hashes: sha1/7vClZj4lhFuMwxiKhsgl6Jnbj4o= sha256/tqGQy3D+ueVGfY9YXbprcdbS+K/W5n6Bi1BDuxf70j8=
When I click on the https link i get the following info for the certificate:
If I click on certificate information I get:
As you see, the certificate belongs to Fortinet. We use that at the office for security purpose. As soon as I get online, it asks me for a password.
But, for some reason, that certificate got 'stuck' on the gmail page.
I went to keychain and tried to find that certificate to delete it, but could not find it anywhere.
Any ideas on how to fix this problem?

Ok, oddly enough it just updated and the music is back on the list...go figure =)

Similar Messages

  • I can not delete emails that appear in the search of my iPhone 4S. They are not in any of the mail folders or on the server. How can I do it?

    I can not delete emails that appear in the search of my iPhone 4S. They are not in any of the mail folders or on the server. How can I do it?

    If you have the serial number of the phone, put it in here
    To find the serial number without switching it on, read this article:
    Find the serial number and other information for your iPhone, iPad, and iPod touch - Apple Support

  • How can I find photos that are not assigned to any collection?

    Hi !
    I'm using LR 5.7.1 on a Mac.
    When I've retouched raw pictures with PS CC (and do not need the PSD file any longer) I export the PSD (that is in my catalog) as JPG and let it add to my catalog automatically. After that I delete the PSD file. That works fine.
    But .... the new JPG file is not assigned to any collection. That's no problem unless I forget to do it manually after that export (and import).
    That brings me to my question.
    How can I find photos that are not assigned to any collection?
    I tried it with a smart collection after I found nothing suitable in library filter. The search criteria I tried are Source -> Collection with any of the conditions. One with an empty value field, then with just a space and so on.
    Has anybody a good hint for me?
    Thomas

    You can also add numbers if you have collections that don't use alphabet characters.

  • Help! I just put a US sim card (i am from Canada) and got a monthly pre paid plan, and when I went to restore the iphone, it didn't work. I can't find backup that i did right before the sim was changed. I really need the info that was there! Please help..

    Help! I just purchased a US sim card/monthly pre-paid plan (i am from Canada) as I am travelling in the states for a month, and when I went to restore the iphone, it didn't work. I can't find backup that i did right before the sim was changed. I really need the info that was there! Please help..

    Hold on,
    Have you talked to your carrier to confirm the unlock?
    What was the procedure you did to unlock the phone?
    Standard unlocking procedure once processed by the carrier:
    Backup in iTunes
    Erase the phone (ignore restore terminology here)
    Plug the phone to the computer and then launch iTunes
    Wait for unlock notification.
    Restore the backup.

  • I have an iMac running OX 10.5.8 I need a portable external harddrive to back it up before updating the software to Yosemite but I can't find anything that doesn't require you to be running at least OX 10.6.  Is there a suitable hard drive?

    I have an iMac running OX 10.5.8
    I need a portable external hard drive to back it up before updating the software to Yosemite but I can't find anything that doesn't require you to be running at least OX 10.6.  Is there a suitable hard drive?  I'm not very technical and wouldn't know how to do any formatting so I want it to be very basic so that I can just plug it in.  500GB should be more than adequate.

    Correct.  When you purchase devices, they would have stated the OS they needed to work, on the box.  This can be overlooked, but it is very important to check when purchasing. 
    You current OS, is so old, that they technology build into the new devices, is not something your OS understands.  It didn't exist when your OS was created, and therefore you need to upgrade the OS to work with the newer technology of these devices.
    10.6 software is not downloadable.  You must purchase a DVD disc.  You can order it from the on-line apple store
    - http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.

  • How do i reset my security questions? I can't find anything that will let me change them

    I need to reset my security questions but i can't find anything that says reset questions here.

    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset - which will normally be by phone as they need to confirm your id and that it's your account.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • How can we find out that the Z table is adjusted or not???

    Dear Friends,
    How can we find out that the Z table is adjusted or not???
    I have activated it but I need to se that the table is adjusted or not? I know we can do it from SE14 but I don't have an authorization ,
    Thnaks,
    Sridhar

    Hi, Thanks for the reply,
    As per ur suggestion of path direction I have checked the table in production and development both.
    In my Z table, I have 2 key fields and for those 2 key fields the primary indexs are created automaticaly and displayed in Developement but in Production there is no indexs are created for those 2 fields.
    Could you please guide me what could be the reason?
    Thanks in advance.
    Regards
    Sridhar

  • HT204266 I can't find apps that I know are available what am I doing wrong? I have typed it correctly

    I can't find apps that I know are on the market what am I doing wrong?

    What specific apps are you looking for?
    Not all apps are available for all operating systems, and
    apps that are available in some countries may not be
    available in other countries.

  • I can't find apps that I've just downloaded out of I tunes on my Mac mini

    I can't find apps that have been downloaded on my Mac mini

    When you say you downloaded apps "out of iTunes" that would imply iOS apps for the iPhone or iPad. Those will be found in ~/Music/ITunes/Mobile Applications where ~/ indicates your home folder. You can install them on the iDevice by attaching it to your computer with a USB cable and launching iTunes.
    I you meant you downloaded them from the App Store, those are only for OS X and will be automatically installed in the /Applications folder on the hard drive root.

  • IOS 8 - using Siri but she can't find contacts that I clearly have in my address book. Why? I can find them manually.

    IOS 8 - using Siri but she can't find contacts that I clearly have in my address book. Why? I can find them manually.

    I have this issue also.  I ask Siri to call a contact, it repeats and spells the contact exactly as it is in my contacts, then says it cannot find it.  This happens for multiple contacts...

  • I recently went to an iphone. new to smart phones. told I need to sync iphone. "just go to your itune account and click on sync iphone" i have been told. I can not find anything that says "sync iphone"

    I recently went to an iphone. new to smart phones. told I need to sync iphone. "just go to your intune account and click on sync iphone" i was told. I can not find anything that says "sync iphone".

    http://support.apple.com/kb/HT1351

  • I accepted a certificate that "appeared" found and now I can't find it to untrust it

    I'm almost sure there was no other option than "accept", and probably didn't think it too much because I know there's a way to untrust certificates if I find out bad reputation online.
    Well, I found "The USERTRUST Network" has been scamming before so I went to untrust it, but I didn't find it in the list.
    The name was (I copied it) "USERTrust Legacy Secure Server CA" by "The USERTRUST Network"
    The buttons are not clickable for the whole category (The USERTRUST Network) and I couldn't find "cert8.db" to delete it, as I found in another post.
    How can I find it or untrust the whole group?

    Try this location:
    *Firefox > Preferences > Advanced > Encryption: Certificates > View Certificates : Servers
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder

  • Firefox can't find images that are there. ALL other browsers can!! Durrr - it just started happening on live an test websites to which there have been no changes

    Try www.avivastringquartet.co.uk
    You will not see pictures on the index.html page.
    Try it in Chrome,Opera, IE and all is fine
    Look at source and look for image by clicking on <img src="..."- says it can't find image.
    Also Firefox does not follow the CSS standard as the others do.
    Current OS is windows XP

    The pictures appear OK for me.
    With the site on display, click on the site identity button (for details on what that is see the [[site identity button]] article) and then on More Information. This will open up the page info dialog.
    First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
    Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
    This should hopefully resolve your issue, but also see [[Images or animations do not show]].
    Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.
    The encoding for the site is set to "UTF- 8" rather than "UTF-8"

  • WRT160N, Laptop with XP, Can't Find Certificate

    My laptop (Panasonic Business Toughbook with XP) can no longer connect to the WRT160N.  Other computers in the house work fine on the wireless network, so I would not want to reset all of them if I reset the router.  As far as I recall, security is WEP, because that's the only one that accepts the long password that was generated on initial setup.  Part of the reset-them-all issue is that they all run different OS (Mac, Vista, Linux) so everything looks different to me when setting up the connections. 
     The laptop has both Windows to run the wireless and Intel PROSet.  Windows tells me it can't find a Certificate.  Intel tells me "Didn't receive IP Address".   Everything worked OK until yesterday morning.  I did have the batter run down on the laptop.  Wired connection works fine. 
    Is there a way to simply "fix" the one laptop that doesn't work?

    Try to add the wireless network manually on your XP computer.
    Open Network connections. Right click on Wireless network connection and go to Properties. Click on Wireless Networks tab. If you see your wireless network under preferred networks list then remove it.
    Click on Add button.  Type the SSID ( wireless network name ). Uncheck the box ' The key is provided to me...'. You will find the box to enter the network key. Enter the network key and confirm it. Click ok.
    Try to connect to the wireless network and see if that works.

  • Mail can not find certificate in key safe

    Hi,
    I am using own certificates that work all fine with all pc and iphones and ipads and macs using OS below 10.10 (Yosemite) and 10.10.1.
    Since I updated a mac pro to the new OS, mail can sign and encrypt replies to received mail, but can not find the certificate when creating new mails.
    An error windows drops from the top in the mail editor window (message can not be signed, no trustworthy certificate could be found):
    When mail is started fresh, it shows in the properties a certificate line
    Once a new mail was tried to produce with using certificates the TLS line disappears:
    I think something is wrong in mail. Any idea?

    First, the address associated with the S/MIME public key must exactly match the address to which you're trying to send the encrypted message, or from which you're trying to send a signed message. If the message is both signed and encrypted, both addresses must match. The matching is case-sensitive: "[email protected]" does not match "[email protected]".
    The signing and/or encrypting certificates must be valid: not expired, revoked, self-signed, or signed by an unknown CA. You can check the status of the certificate in Keychain Access (see below.)
    If you can't encrypt or sign messages to a valid address with a valid certificate, continue.
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select
              Change Settings for Keychain "login"
    In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
              Keychain Access ▹ Preferences... ▹ First Aid
    If the box labeled Keep login keychain unlocked is not checked, check it.
    Select Keychain from the menu bar and repair the keychain.
    Quit and relaunch Mail. Test. If the problem isn't resolved, continue.
    Export all S/MIME certificates, delete them from the keychain, and reimport. For instructions, select
              Help ▹ Keychain Access Help
    from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
    Test again. If the test fails, delete all the certificates again, then reinstall them from fresh copies.

Maybe you are looking for

  • How to store data in a file without using DB

    Hi all I want to develop a small application that could contain at most 10000 records, so if it is possible I want to store the data in a file, therefore the installation of the application can be simplified and the users don't need to add a ODBC dat

  • Trying to add a motion path to a panel but i get errors...

    hey guys.. im trying to move a panel container from one location to another.. basically when i start off the application the panel's horizontalCenter is set to "0" what i need it to do is move from that center location to left. the code i have is...

  • HT1386 Why can't I download my previously purchased music from itunes to my new ipod touch?

    I can't seem yo download music that I purchased from itunes. I purchased it for an earlier generation ipod and now I have an ipod touvh.

  • Firefox for Mac: Upload/Attachment window won't disappear

    Howdy - I recently upgraded to OS X Yosemite 10.10, and Firefox 32.0.3. Frequently, but without consistency, the upload file or attachment window will not disappear after I have selected a file. For example, in Wordpress, I will go to import a file t

  • Component mouse was clicked in

    Hi all, I have an array of JTextFields, which represent setup names in my program. I override isManagingFocus so that I can determine which one has focus if the user tabs thru the JTextFields. This is working. I need to determine when the user mouse