Can't find Classic support on Tiger DVD

I need help. I recently purchased a used 17" powerbook. I wiped out the hard drive and installed the Tiger DVD, and everything works fine... but I can't find anything that installs Classic. Can I install the Classic Environment from the Tiger DVD? Or do I have to use my old Panther CDs to install Classic on the laptop. My two other Macs, a G5 (with Tiger) has classic working. However, they originally had Panther and then I just upgraded to Tiger. How can I get Classic back?

Apple does not advise installing OS 9 for Classic support from any source other than either the original disks that came with the Mac or (in some cases) with a retail version of OS 9. If your OS 9.2 disk is a stand alone retail installer (not an updater for OS 9.0 or 9.1) it should work. Your Panther disk will not, unless it is a model specific version for your model.
The exact method of installing OS 9 varies greatly depending on what disks you have. Please be as specific as possible about this -- the source of the disk(s), if they say they are bootable, if they are for a specific model, etc.
By far the easiest way to do the install is with the original disks for the PowerBook. You should try to get them from the seller to avoid a lot of hassles.

Similar Messages

Where can I find Classic os9

Where can I download Classic OS9 for Tiger
Thanks,
Bob

You will need to buy a copy on ebay, etc. 9.x. I think 9.2.2 was the last. Be sure it is the full install cd.
You will need to find a machine that is bootable with 9.x. All the iMac g3's boot with 9.x.
You can then copoy over the system folder to any PPC running Tiger or earlier x to run in classic environment.

I can´t find windows support files for boot camp

I can´t find windows support files for boot camp

Boot Camp Assistant
If you can't download, go to Network control panel and check your settings there, look to see if there is more than one interface listed. And turn off "Auto-proxy setting" and see if that helps, it does in half the cases.
The only thing really needed would be a small Apple Software Update for Windows program to pull the drivers down while running Windows. Just that one program, which could update itself as happen with 2.0 and 2.1 version.
As it is, downloads can take 8 hrs for a tiny 620MB package. Strange. True. Been like this.

I'm trying to place an order for 3 iPhoto Albums, but the system won't take the billing address. I'm in Costa Rica and will send the albums to an address in Miami. Can't find any support live chat for billing issues.

I'm trying to place an order for 3 iPhoto Albums, but the system won't take the billing address. I'm in Costa Rica and will send the albums to an address in Miami. Can't find any support live chat for billing issues.

You need to use a credit card with a billing address in the same country as the delivery address. Since there's no Apple Print Store for Costa Rica I assume you're using the United States print store. Therefore you'll need a credit card with a billing address in the US.
OT

Error during recovery: can't find PREINST4.SWM on the DVD

Hi everyone,
I was trying to reinstall the factory settings on my laptop with the toshiba software but during the copy of files from the first DVD of Recovery,
It says: Can't find PREINST4.SWM on the DVD.
So I look at the DVD with another computer and I find the file, so I don't know how to fix this problem, maybe reburn the DVD ? (there is no scratch on the DVD)
Thanks
[sorry for the bad english speaking, it's not my native language]

Of course its worth to copy (burn) the DVD again but Im not quite sure if it will be helpful.
Probably something went wrong during Recovery disk creation.
In such case the DVD disk isnt created probably and the recovery procedure would not finish.
This would require new Recovery DVD which could be ordered from Arvato

I can't find any support package for Solution Manager 4.0

I can't find any support package for solution manager at
Support Packages and Patches - > SAP Technology Components
SAP Technology Components
GATEWAY
JAVA LOG VIEWER
SAPCAR
SAP EXCHANGE CONNECTOR
SAP CR CONTENT
SAPROUTER
SAPSECULIB
SAPSSOEXT
I'm searching it at a wrong place?

You´re at the right place - but your user doesn´t seem to have permissions to download them.
You have a license for Solution Manager?
Markus

Setup can not find a supported product

&Setup can not find a supported product3 I have an XFi XtremeGamer and I tried to update the console launcher and received the error that setup could not find a supported product. I have had this machine for 2 years on XP, and I used the autoupdate feature on the website. This feature found the device on my machine and listed a few updates including the console launcher. I would think if there was a problem, the autoupdate would issue some kind of error. I was able to update the driver on 2/7/08 without any problems using the autoupdate with the website, and I did install the wave studio suite yesterday with autoupdate without issues too. I have made no hardware changes to this machine. Device Manager lists the device as working properly. I do have sound from the card. I tried to download the launcher.exe package with the same result. It would seem that I would have had more issues if the card wasn't installed correctly including the?autoupdate feature not?working and not finding the card and other autoupdate software packages not installing correctly.
Any ideas? Thanks.

[color="#000000"]The Creative Console Launcher 2.60.35 update does not work for my X-Fi XtremeMusic soundcard with Vista 64-Bit OS.
Edit:
Either going through the creative autoupdate or downloading the file manually and trying to install this update, I get this message below. Yes, I have went to the right download webpage for my soundcard and operating system.
My Soundcard : X-Fi XtremeMusic SB0460
My Operating System : Vista 64-Bit
[color="#ff0000"]"Setup is unable to detect a supported product on your system. Please
ensure that your product is properly installed before running this
setup program".
[color="#ff0000"]?
[color="#000000"]?=======
[color="#ff0000"]?
<div class="DownloadFileName">File Name : CSL_PCAPP_LB_2_60_35.exe<div class="DownloadText">This download contains?the Creative Console Launcher application. For more information, read the rest of this web release note. This download supports the following audio devices only:
Sound Blaster? X-Fi? XtremeMusic<
Sound Blaster X-Fi XtremeGamer<
Sound Blaster X-Fi Platinum<
Sound Blaster X-Fi Fatalty?<
Sound Blaster X-Fi Elite Pro<
Sound Blaster X-Fi<
Sound Blaster X-Fi Surround 5. <
USB Sound Blaster X-Fi Xtreme Audio?Karaoke<
Fixes:
Rectifies the output delay when using line-in/microphone monitoring.<<font face="Tms Rmn">?<font face="Helv" size="2">?
Requirements:
Microsoft? Windows Vista? 32-bit or 64-bit, Windows? XP Professional x64 Edition or Windows XP Service Pack 2 (SP2)<
Creative Sound Blaster?audio devices listed above<
[color="#ff0000"]?
Message Edited by freesky on 0-02-2009 0:28 PM

Setup can not find a supported product...*I SERIOUSLY NEED HELP* SB-XFI

WinXp System
I've posted here before and no ones been able to help me with a solution..but this problem keeps occuring when I restart randomly when I get back to windows there will be no sound.
Here's the procedure I follow which works (randomly) after 2 or 3 hours of doing this over & over & over & over again..
Upon the sound not working I..
1: Add/Remove programs-uninstall creative drivers
2: Launch Driver sweeper (Guru3d) select Creative-Sound..****yse. Remove any entrys it finds.
3: Open the setup for the SBXFI drivers (the ONLY one that will work for me) .0.0. Created /30/2009
then Driver Uninstallation> Delete all shared Creative Audio Driver files
4: restart and clean boot back into windows.
5: I re-open that driver setup file and do -Driver Installation. Now most of the time it will run..wait a little bit then tell me to restart. This means it WILL NOT WORK. I know when its gonna work because it will pop up a windows caution box saying that the driver is unsigned and do I wanna continue.. I click yes and thats a sign it'll work..but that only happens after HOURS of doing this procedure..if Im lucky.
Tonight Im on hour 2 of this rubbish and Im absolutely sick of it..can someone provide a fool proof way to make these **bleep** drivers work?!? I've tried to run almost all the other drivers out there and if I attempt that I get the "Setup can not find a supported product..." for some reason this driver Im using is the only one that works..sometimes..
Message Edited by Wildone_06 on 05-06-2009 0:0 PM

Thanks, its [size="" face="Arial">Sound Blaster? X-Fi? XtremeMusic.
I got it working again around 0pm last night, after doing that procedure since 7pm. Now if its the wrong driver, it would never work..if its the right driver..it should work first time. So I have no idea why I have do this ritual and it'll eventually work after so many trys..is this software vodoo based or something!?
The OEM drivers that came with it certainly dont work (The 'setup can not find ect ect) so its a mystery to me.

Can't find any support for my Satellite P875

Hi,
I can't find any support about de P875 laptop (PSPLBE-01G00HFR)
No product found in the support search tool. I just installed windows 8 on this laptop and I'm trying to install drivers but can't find them.
Thx
JP

Win8 support and download page you can find on http://eu.computers.toshiba-europe.com/innovation/windows8_drivers.jsp?service=EU but all drivers, tools and utilities are not released until now.
Have you used Toshiba upgrade assistant for Win8 installation?

Can't find Application Support for Address Book in Lion. Any ideas where to go?

I need to re-establish my Address Book after iCloud doubled all of the entries in it. But I can't find Application Support for Address Book in Lion.
Can someone help?

Go menu -> Go to folder.
Enter ~/Library
And select Go.
Your contents will now be visible.
WARNING: messing around with these contents without at least twice backups may make your data inaccessible or worse if you don't know what you are doing.

ALERT : can't find application support folder

Hello everyone
I've changed my user name, and now, I cannot enter my files and applications anymore.
I don't know what to do.
This message never diseappear : " Alert:can't find application support folder"
What can I do? Please, anyone help ME!
Bonjour tout le monde
J'ai voulu changer mon nom d'utilisateur et maintenant je n'ai plus acces à aucun de mes fichiers ni de mes applications.
Ce message s'affiche en permanence : Alert : can't find application support folder
Que faire?
Quelqu'un peu m'aider?
Merci.

Go menu -> Go to folder.
Enter ~/Library
And select Go.
Your contents will now be visible.
WARNING: messing around with these contents without at least twice backups may make your data inaccessible or worse if you don't know what you are doing.

New iMac G5 but no classic support in Tiger?

I have just bought a new iMac G5 20" with the latest Tiger 10.4x. When I want to install a peripheral or Quark from my old Os 9.2.2 it say "I do not have a version of Mac Os9 installed that supports classic or later." in the pop up window. I hit the ? button and it tells me to install from disc 2 the support files. When I do that it tells me there is nothing to install.
A greyed out icon appears in the menu bar. A widget appears in the widget bar.
I checked the startup disk to see if mac os9 was on it ,it's not.
Do I have a dud install 2 disk? The icon is only an alias for os9 support files.

What constitutes "compatibility" is partly what you mean by the word.
From Tiger's built-in dictionary:
"• (of a computer, a piece of software, or other device) able to be used with a specified piece of equipment or software without special adaptation or modification"
By this definition, all recent Macs (except servers?) up to but not including the Intel-based ones are compatible with Classic, at least to the extent that installing the included Classic support is not considered a "special adaptation."
I think most people would consider something like SheepShaver quite a special adaptation: from what I can tell, it requires both an image of the PowerMac ROM & a copy of the Mac OS, which I presume are not included with Intel-based Macs. I also note it claims only to offer a "varying degree of functionality" with listed systems, among them "Darwin/ppc," but no specific reference to Darwin + Intel support. The only Intel CPU reference I see is to "Linux/ia32 (AKA x86)" so I'm not sure this emulator really should or could be considered a replacement for Classic in OS X/Intel systems, even in a limited way.
If you know otherwise, I'm sure that info would be of great interest to readers of this thread.

Classic Support in Tiger and Leopard

Hi,
I have a PowerMac G5 (PowerMac 7,2 XB35028YNVB) and would like to know if it's possible to install OS9 Classic support for this system.
I currently have Tiger 10.4.10 that was installed from a retail cd. It did not come with the system and did not come with classic installed. (Ebay special :-S )
I want to know if I can get the original cds sent to me, or if a retail OS9 cd will suffice.
Also, if the retail cd will do the trick with Tiger, will it also work for Leopard (I'll be upgrading soon)
Many thanks
-James

I am not sure if this helps you or not
http://discussions.apple.com/thread.jspa?threadID=1174990&tstart=0

Problem installing Classic Support on Tiger

I'm trying to install Classic support on my iBook. The install appears to complete. It says it did anyway.
When I double click on a classic app I get this error:
"The Operation could not be completed.
An unexpected error occurred (error code -1)."
There also seems to be no preference panel for Classic like there should be.
I'm thinking that the install actually did not complete but I can't figure out why.
I saw this in the install.log file when I tried installing it but I don't know if it is relevent:
"Package Authoring Error: Infinite loop between <choice> attributes and mixed state aborted."
I tried repairing permissions but it didn't appear to do anything.
Anyone have any ideas?
14" iBook G4 (mid 2005) Mac OS X (10.4.5)

I'm using the "Install Mac OS 9 System Support" symlink on the cd that came with the ibook.

Where can I find platform support metrix for Oracle 10g/11i JDBC drivers?

I need find the official supported platform metrix of Oracle 10g/11i JDBC drivers.
Where can I find this kind of information?
especially, does Oracle 10g/11i JDBC drivers support Windows2008 and AIX6.1?
Any information, please share with me here.
Thank you so much!

This Metalink has all the nesscessary inforamtion
metalink 401934.1
Besides this you can check the JDBC developers guide
[For 11|http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/overvw.htm#i1003779] [For 10g|http://download.oracle.com/docs/cd/B14117_01/java.101/b10979/overvw.htm#sthref61]

Can't find Classic support on Tiger DVD

Similar Messages

Maybe you are looking for