Can t find "corresponding RAW files"

Hi all,
I am using aperture 3 with a nikon camera (D40X).
I have recently tried the following: shooting in Jpg + NEF (=RAW).
I first import the Jpg files then make a first selection and then go back to my memory card to import only the corresponding NEF files (using current filter set up). It usually works fine but I have left one project for maybe 2 months or a bit less unprocessed, I just got one NEF file for one specific picture I modified. Now I wanted to get the other NEF files corresponding to the other Jpg files I had selected. It seems that it doesn't show any file... what's the problem? I tried removing the filter option, I correctly selected the right project in which the corresponding Jpgs are ... What am I missing, what could I do to associate these files again?
thanks a lot

Perhaps you imported both format versions originally? Control-click on one of the images, and then see if the option to show version from RAW master is available.
Ernie

Similar Messages

I Just converted my iPhoto library to Photos. Now I can't find my RAW files. I need to have all the images in my old library show up in their RAW format.

I Just converted my iPhoto library to Photos. Now I can't find my RAW files. I need to have all the images in my old library show up in their RAW format.

Unfortunately no - Photos use extensions and the vendor (adobe) will have to implement the extension to allow external edits in PS or PSE
For now you must export the photo, edit and then import - not great but a work arond
And you can continue to use iPhoto until Photos meets your needs - launch it in your applications folder - if you need assistance on this see Why won't my iPhotos open?
LN

Spotlight Can't Find My Raw Files

For months now, Spotlight has been unable to find my raw files. If I type .CR2, it finds them just fine, if I type any digit(s) at all before the .CR2, it can't find them. The same problems happen with my older camera that ends raw files .CRW
I'm not concerned with the metadata, just the file by name.
Any thoughts?
Thanks,
George

Ah, the difference is between using the "quickie" Spotlight versus the full Command-F, which returns much better results.
Reading what you are getting strikes me as showing that the metadata importer handling your new camera's files is not working quite right. Thus, I have one drive that is searchable with Spotlight, but not indexed (it is a bit tricky to set it up that way). If I do a quick Spotlight search on "4039" my camera raw files that are on the fully indexed drives all show up, but the copy on the non-indexed drive does not. If I do a full Command-F search, with the two criteria of Kind:Canon Camera and Name Contains 4039, then it does show up. So I would guess that your new files are behving as if they are not fully indexed, and that the camera raw support in the metadata importer is lacking for that camera's files. Perhaps your new camera's raw format is just not fully supported yet. Have you run the latest Camera Raw updater from Apple?
Also you might try one of the search utilities that doesn't depend on indexing, EasyFind is free:
http://www.devon-technologies.com/products/freeware/index.html
You might find you like it better. Because it does a brute force search it can be rather slow. If you restrict it to just the folder that contains images, even if the folder is quite large with many sub-folders, rather than having it do a whole drive, its performance is actually quite fast.
Francine
Francine
Schwieder

Can't find any raw files to convert when I am using Adobe DNG converter

Recently I purchased a new Olympus XZ-1 camera. I shoot exclusively RAW pictures (raw files for this camera are called .orf). Then when I tried to import these .orf files in the organizer of Phtoshop Element 8 it was imposible, nor then I could see those pictures in the organizer. By surfing on diffrent forums, I was able to figure out that Camera Raw included in Element 8, Camera Raw 5.5, is not supporting the .orf raw from Olympus and if I didn’t want to upgrade my Element 8 to Element 9 or 10, a simple alternative was to download Adobe DNG converter to convert all my .orf files into dng files, which could then imported by Element 8 and opened in Camera raw 5.5.
I downloaded DNG converter version 6.6 and installed it in on my computer running on Windows 7. The problem is that once inside DNG converter, when selecting the folder where all my .orf files are (Select folder), I can't see any raw files to convert there! I tried to select a folder with NEF files instead (raw files from Nikon) and it is the same problem! Why can’t I see those files of mine I want to convert when I select the folder in DNG converter?
I'm dying for help!
Thanks a lot!

When you are selecting the folder in the DNG converter, you only click on the folder. You DON'T double click on the folder. After you have set your options, and chosen the folder, you click on the Convert button. It is only after you have clicked on Convert that you will see the list of files that are being converted. You will also be able to see an indicator of the progress of the conversion. It really does work. Just to verify, the procedure I outlined is one that I did just prior to trying to write the instructions. It really isn't rocket science. Just choose the folder, only the folder, and click on the Convert button.
You'll notice that the button prompts you to select the folder, it doesn't say anything about selecting a file. You only select the folder that contains the files. You will never see a list of files using this method. If you only want to convert one or two images you can use the other method. Leave the DNG converter closed, open the folder containing the DNG files in your operating system folder browsing utility, choose the file you want to convert, and drag it onto the icon for the DNG converter. That is how you choose individual images.

Can't find a raw file that was just on my fash card. need help.

I shoot raw/jpg. I viewed in Digital Photo professional and transferred a Tiff to photoshop. I saved the image on a seperate disc. when I opened and tried to save again I received an error saying I didn'thave permission. I finally saved the psd version by changing the name of the picture. when I went back to the raw file on my flash card it was gone. when I went back to the tiff file that was gone to. the only file I have left is the jpg back up and the psd version. All the other pictures are still on both the flash card and my backup drive except this one. I've done recovery searches and they recover everything i've deleted from the flash card except the file I need. I don't understand why this happend. I've tried searching for hidden files etc. I didn't delete this file. the recovery program shows that it is there it just won't get it. it gets everything else but not this one. both the raw and the tiff files disappeared from two different drives. I want to get the raw file back. Help!

Recovery programs can only recover file that have beed deleted when the media space they occupied has not reused and written over. So if the recovery program did not recover your images. I would be willing to bet some of the space the image occupied has been written over. So it can not be recovered even though its delete directry enter can be read its data is no longer intact.
Without a system trace you have to rack your brain the remenber all you did. To get a clue to what wrote to your flash card. Its best to just copy file off flash cards onto your hard disk and remove the card from the card reader with the files still on the flash card. After processing your images on your computer its a simple quick process to format the flash card in camera.

Why does lightroom 5 do not read or can't find my raw files when I'm trying to import my images from my camera to light room

It just started happening out of the ordinary. I had a photo shoot done today. I came home plugged my camera usb to my mac lap top and tried to import my raw files as i usually do into light room 5 to edit my images. This time the same error message popped up stating it couldn't read or my files weren't found over and over again. Neither the new ones nor the old pictures was able to import them. Please Help!

I just bought Lightroom and have the same problem - MacBook Pro with OS X 10.10.1. LR actually displays the photos properly when previewing but fails when starting the import. Also, a couple of times it would start but would hang up. I think it may be a Yosemite problem. I was having trouble importing with Aperture too. The fail message from LR was:
The following files were not imported because they could not be read. (6)
    IMGP7941.JPG
    IMGP7942.JPG
    IMGP7944.JPG
    IMGP7943.JPG
    IMGP7945.JPG
    IMGP7946.JPG
I can copy the folder from the camera to my desktop and then import. That works but of course I shouldn't have to do that.

I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put ab

I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdris

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

Windows Find File can't find Camera Raw.8bi though it's there

Hi everybody,
Must be my age, but here it is:
Windows Find File (the search utility from the Start button in XP) can't find Camera Raw.8bi although it's sitting perfectly inside:
C:\Program Files\Common Files\Adobe\Plugins\CS3\File Formats.
Even *.8bi didn't find it (or any other .8bi file for that matter). The obvious search strings *did* find the couple of archived ACR files I backed up, including the latest, but not the one sitting in it's normal spot.
I then tried my second PS machine (the laptop) and there the same happened (no ACR file found although its there).
On both computers ACR 4.3.1 is working correctly. I was just checking their location, because sometimes after a camera file ingest session, Bridge shows some Raw files as generic icons, which also have no metadata, and have "no" after "supports XMP".
The latter problem aside, maybe someone knows what I'm overseeing in the file find thing.
No folders or files in the above path are flagged Hidden or System, or anything.
Thanks,
Rob

Ok, That's ready (pffft!)
Now the file find problem. I put a check on the "hidden files" box, an now it actually finds it.
But it's not "hidden", nor "system". Just "archive".
So then I looked to see if any of the folders in the path "C:\Program Files\Common Files\Adobe\Plugins\CS3\" was hidden, but no.
Fine. Heck, I got other things to do. It's not important. Faggettaboutit. Thanks for thinking with me!
Rob

I backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

i backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

Don't you just love changes in interfaces?
I found the answer to my question.
When you attach a device (iPhone, iPad) to your Mac, in iTunes 12 in appears as a tiny icon in the second "row" of the iTunes display. Click the icon and the familiar iTunes display for the device appears. From there, on the Summary screen, you can see the dates of the backups of the device (iCloud and backup to the computer). You can also use the button to backup to the computer.

I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again

I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again it says that the "Object Already Exists." It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.

cactisken
You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
Can you still use 12/12.1 on this same computer that will not let you use 13?
What specific Window operating system are you using?
Let us go through the usual drill...
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you using a pen and tablet device instead of a mouse?
3. Did you install the program with antivirus and firewall(s) disabled?
4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
from SLCache to SLCacheOLD.
5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
computer as Premiere Elements 13?
Let us start here and then decide what next.
Thank you.
ATR

My LV program can't find the iak file when the program is loaded from a different PC.

Hello all,
My LV vi with Fieldpoint I/O and it's IAK file are stored on the company network.  If I load and run the LV vi from the PC it was developed on, everything is fine. If I load and run on a different PC (that has an identical install of LV), the LV vi can't find the IAK file (all of the I/O pointers to the file are grayed out.)
Also, if I make an EXE out of the vi on the machine that can find the IAK, it won't find it if it's run from the other machine.
It is not related to whether one machine has different "rights", as they are identical. It's not related to different installs of LV, as they are identical.
I have found that this is related to the network login name/password, and to the machine's network name.  If I login on the second machine and try to run the program, it won't find the IAK. If I point it to the IAK it will run. If I save it and log out, and then login as a different user with the same rights on the second machine, it won't find the IAK again, until I re-point it there when I re-run it. This is true for both the vi and the EXE.
This problem makes deploying the EXE difficult to different machines, as the first time it's run, the EXE has to be pointed to the IAK. Pointing the EXE to the IAK is difficult as these installations have no keyboard or mouse.
Does anyone have any ideas on how to fix this so the LV vi or it's EXE finds the IAK from no matter where it's loaded from?
Thanks,
Mike

Laura,
I figured I'd continue this thread because it's along he same line..
I have two Fieldpoint systems. They are identical, except for one thing...one has an AI-110 in position 7...the other has nothing. Both have the same IP address, etc and I swap the ethernet cable between them when I want to select which one I use. I use a dedicated ethernet card to the FP processor...and it's not the company net.
There are two IAK files...one for the system with the AI-110, one for the system without the AI-110. The two IAKs are in different paths.
Before I had the system and the IAK without the AI-110, I made an EXE of the code that woked with the AI-110, and it worked fine.
But now if I run the EXE after I've used MAX and opened the IAK without the AI-110, the EXE won't read the AI-110! I have to go back into MAX and open the IAK that has the AI-110 in it, close MAX and restart the EXE for the EXE to see the AI-110. (Max is NOT SET to "Download Items on Save")
I looks like the EXE is looking at MAX to get the IAK or a pointer to the IAK.
Did I build my EXE incorrectly? Shouldn't an EXE completely ignore MAX once it's made?
Thanks,
Mike

Why i can't open my raw file in adobe photoshop cs6... and i use camera Canon 650D

why i can't open my raw file?

You probably need to update your Camera Raw plug-in for CS6 to something new enough to understand the 650D raw files.
The usual way you’d do this would be Help / Updates in PS.

Can't find my data file to back up, so I can uninstall and reinstall the software. (Windows, Vista & Palm version 6.0.1)

I can't find my data file, in order to back it up. After going to Documents - Palm One, the only thing that looks like a user name is a file with no data. Somewhere there has to be another file with all my data, since data is available when I open the Palm One software on my computer. After backing it up, I want to uninstall and reinstall the Palm One software. I'm hoping this resolves my inabilty hot sync. Thanks! Lauraflavin.
Post relates to: Tungsten T5

If you're using XP, your data is here:
C:\Program Files\Palm (or PalmOne)\ your Hotsync Name abbreviated \
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

You can't do that.
And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music.

How can i find out the file size of a Keynote on an iPad please?

How can i find out the file size of a Keynote on an iPad please?

I think a rule of thumb is what you're looking for.
Full bandwidth CD audio (AIFF): about 10 MB/min
Apple Lossless: about 5 MB/min
MP3 @ 256k: about 2 MB/min
MP3 @ 128k: about 1 MB/min
Of course the MP3 file size is exactly linear with bit rate.
As for sound quality:
Apple Lossless is, as the name says, lossless.
MP3 @128k: fine for listening in the car or the kitchen etc. If you have an audiophile sound system, this will remind you why you spent all that money.
MP3 @256K: barely distinguishable from CD on very good equipment.
MP3 @320K: probably not distinguishable from CD.
I presume that since you're talking about importing classical CDs these are ones you own. Remember you can always do it again if you need higher fidelity or if better technology comes out. I import most CDs at 128k, since most of my MP3 listening is in the car, or walking, or as background. And I can always play the CD if I want to sit and listen.
The logic for purchased music is totally different -- you probably won't get to upgrade that without buying it some different way. So buying 128k MP3s (or AACs) is something you'll probably regret later. Buying 256k MP3s is a lot less problematic.

Can t find "corresponding RAW files"

Similar Messages

Maybe you are looking for