Can't find data-generator

Anybody read the document called "Key Data Warehousing Features in Oracle9i"? It mentioned a data-generator for the schema is available for download, however, i couldn't find it at all. Is there anybody knows where it is?

I am also looking for the same. Did u get it. Please help.

Similar Messages

Can not find data in virtual cube

Experts,
I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
Can anybody tell me what could be the reasons the data is coming through Virtua cube.
Thanks,
AK

Hi,
i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
regards
Siggi

In which table in CRM can i find data in business activity details?

Hi
In which table in CRM can i find data entered in business activity details in opportunity transaction.
Please advice .
Thanks,
Vaishnavi

found the table name CRMD_Activity_H

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

Welcome to the Apple Community.
Along with the things you have tried, some have had success setting the location to the US.

In which table can I find data about payment runs (F110)

Good morning,
Can anyone tell me in which table I can find data about payment runs,which are carried out via transaction F110?
Data about dunning runs can be found in table MAHNV, KNB5 & LFB5.
Thank you.
Kind regards,
Linda

Hi
See in REGUH and REGUP. Also for Check payments, it can be seen in PAYR
Jayaram

Can't find data after transfer between macs using migration assistant

I wanted to transfer data between my Macbook air using Mountain lion and a MacBook pro using Mavericks. I did it using migration assistant through Wi-Fi. The process was completed without problems but I can't find the data on the MacBook pro!
It was my pictures folder, about 50Go and I can't find it anywhere on the new computer. It should be easy since there is almost nothing on there at the moment. It is a new install.
The disk utility tells me that I have now an extra 50Go of space used, so it must have been transferred...
Any idea?
Thanks

I found my data in the shared folder. Not all of it was there and in the end a nice lady from Apple told me to start again from the beginning and delete the mess the import program created
I am still a bit confused over the red circles but make sure you are in the right account when trying to see the data as I dont think even as admin I could see the main user account (I had 5 for the family).
There is a button under the get info tab that can change some of the permissions
Frustrating isnt it

CS5 - Can't find Data Driven Graphic Wizard

I just move to CS5 from CS3, is that the DDGW function being cancelled? cause I can't find it from the menu bar and the offline help manual.
Thanks

Hello!,
I just wanted to share with you all that today I needed that data-driven merge wizard. I'm using CS4. The Extension Manager showed it activated but it was not ( I didn't appear under the Commands menu). I unchecked the activation checkmark. Then I closed fireworks and the extension manager. I launched Extension Manager again, enabling the data-driven merge wizard, and now Fireworks shows it under the Command menu.

Can't find Data Control Palette

I can't find the Data Control Palette...
If I click on "View" in the jdev toolbar, I only see Component Palette and Resource Palette. What do I do?
Thanks

The Data Control Palette is inside an accordion in the Application Navigator in 11g.
See this :
http://www.oracle.com/technology/obe/obe11jdev/11/ejb/images/t50105.gif

Can not access data generator in HANA SHINE Content

Hi Expert,
After import Delivey Unit of SHINE Content, then i was told by the Guide Book that i could use data generator to generate demo data by access URL
http://<myServer>:<XS Port>/sap/hana/democontent/epm/admin/ui/WebContent/admin.html
STEP1:I used SYSTEM on the HANA login page
STEP2:Error 404 refelect
Does anyone else have encountered this problem?
Message was edited by: Tom Flanagan

You might check the repository browser, but I don't believe that URL is correct. There is no ui or WebContent folder in the path in my system. Its just /sap/hana/democontent/epm/admin/
But I suggest checking the folder structure in the Repositories view in your own system to make sure. My system is a new version and could be different than what you are seeing. However this would explain why you are getting the 404.
Also make sure that SYSTEM has the necessary SHINE admin role added.

Can't find data after backup

Computer hardrive broke so apple put a new one. We saved all our music, photos and videos in the time capsule. When the computer got here, we did a backup. It took about 10 hours but now, we can't find our pictures or our videos or our music.

It is one or the other. Since you're Restored the phone from the previous backup, the new content is gone (unless you did a separate backup) and whatever was in the old backup is all you've got. And there is no merging capabilities.
Beware that if you do not password-protect a locally-stored backup made on iTunes on a computer, not all the content gets saved. I suspect it is similar when using iCloud, but I never use that so don't know for sure. Just Restored my new iPhone 6+ from the full backup of the previous iPhone 5 and all was there save a few passwords such as iCloud.

Time Capsule can't find data

Hi
I recently moved house and with it my time capsule, the problem is I can no longer find the data I held on my Time Capsules hard drive (primarily Movies and Photos). It's a 1TB TC, showing free space of 57GB so I believe the data is there but I just can't see it.
Previously I would just go to Finder > Time Capsule > Data and it was there, the same folder exists now but it appears to be empty.
Any help would be greatly appreciated.
Thanks,
Paul

Turn on the guest account..
Make sure you connect by ethernet..
Press reset and try the setup again.
Reset will not delete files.. you have to deliberately erase them.

How can I find data of various lenght in my table?

we have seen cases where the data is one character short,
such as "1513259925" vs "12223334444" which is normal lenght of expected data.
We would like to know if we can find any other data like this in the db.
ie data that is one character / number shorter than expected lenght.
How can I acomplish this?
any function I can use?
thx

select *
from mytable
where length(the_column) = (11 - 1);where 11 is the expected length so you are searching for data that is 10 characters.

SSM Dashboard can't find data to create it

Hi everybody,
now I`m trying to create a new Dashboard from SSM 7.5 TAB, but when I select the MODEL from I want to load data, first appears a message saying "Loading data please wait" , and after few seconds, I got the following message on the rigth of the screen :
" No data was found for the current selections "
any ideas?
there's data loaded that I can view it from SCORECARD page.
thanks for your valuable tips!

Hello Ricardo,
I have been in the same problem. You must check the LASTDATE document in PAS.
Go to your model in PAS and expand it. Examine in Documents, should see a LASTDATE document.
In it, you will find a date (01 dec 2010), configure it with the last date of the data you got in PAS.
These work for me, and of course thanks to our friend Bob.
Fred.

Data loaded successfully in RSA3, but can not find data in BW PSA

Dear all:
We have custom datasource enhanced through BADI. For one column, in the source system RSA3, I can see this field populated with data, but in BW, when I load the data in PSA and check, this field is blank...
I tried seeral ways like re-replicate datasource, delete the datasource in BW and re-replicate, but not work.
Did anybody meet the same situation before? How to handle this issue?
Any post would be appreciated and thank you all in advance!
Tim

Hi Pavan:
Thanks for your reply.
I don't have any selection field for this datasource, and the number between ECC and BW matches. Actually the problem is only for one field, on ECC side RSA3, this field are populated with values, while in BW PSA, this column is there, but all the content are blank.
I do call one function module called to populate that field:
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
      CLASS                      = ''
        CLASSTEXT                  = 'X'
        CLASSTYPE                  = '023'
      CLINT                      = 0
        FEATURES                   = 'X'
        LANGUAGE                   = SY-LANGU
        OBJECT                     = W_OBJECT
        OBJECTTABLE                = 'MCH1'
        KEY_DATE                   = SY-DATUM
        INITIAL_CHARACT            = 'X'
      NO_VALUE_DESCRIPT          =
        CHANGE_SERVICE_CLF         = 'X'
      INHERITED_CHAR             = ' '
      CHANGE_NUMBER              = ' '
      TABLES
        T_CLASS                    = ITAB_CLASS
        T_OBJECTDATA               = ITAB_OBJECTDATA
      I_SEL_CHARACTERISTIC       =
      T_NO_AUTH_CHARACT          =
      EXCEPTIONS
        NO_CLASSIFICATION          = 1
        NO_CLASSTYPES              = 2
        INVALID_CLASS_TYPE         = 3
        OTHERS                     = 4
    IF ITAB_OBJECTDATA IS NOT INITIAL.
       READ TABLE ITAB_OBJECTDATA INTO wa_OBJECTDATA WITH KEY atnam = 'ZLOBM_PLNTMFG'.
       <LS_ESMI_BW_MD_ZBATC0001>-ZORIGPLNT = wa_OBJECTDATA-AUSP1.
    ENDIF.
The code is very simple, it just call the standard FM and fetch the value from the return table, is there any thing wrong with my code?
Thanks!
Tim

RMAN duplicate target using set until telling me it can not find data files

I have RMAN scripts that I use freqently to clone a database from DB (production) to another (non-prod). These work just fine. I use the set until so that I can tell it at what point I want the new DB to be created from the backups of the source.
I had a request to go back a few weeks and the backup files (I do compressed backups to disk) were on tape. I had my backup person restore my backup directory for the source DB as it looked on a certain day (May 28). I have an 8 day retention policy and so the backup files that were restored showed files all the way back to 5/20 ( includes the point I want to use in my set until clause).
However, whenever I try to execute the rman clone, it tells me for each datafile:
RMAN-06023: no backup or copy of datafile 1 found to restore
Like I said, I am able to do this for a current backup that is on disk. I moved the backup files to the source db server and it works fine. However, from these files restored from tape it errors.
Here is the RMAN script:
spool log to c:\temp\clone_CSPROD_CSPRSUM1.log;
#connect to catalog <catalog info>
# target is the source and auxiliary is destination
#connect target <put in source info here>
#connect auxiliary /
run {
allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
##Archivelog number get from sql archive log list command
#set until sequence 831;
set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
duplicate target database to CSPRSUM1 nofilenamecheck
logfile
group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
Exit
Here is the output:
Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
Recovery Manager11.1.0.7.0
RMAN> #connect catalog <redacted info>>
2> # target is the source and auxiliary is destination
3> #connect target <redacted info>
4> #connect auxiliary /
5>
6> run {
7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
12> ##Archivelog number get from sql archive log list command
13> #set until sequence 831;
14> set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
15> duplicate target database to CSPRSUM1 nofilenamecheck
16> logfile
17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
20> }
starting full resync of recovery catalog
full resync complete
allocated channel: d1
channel d1: SID=534 device type=DISK
allocated channel: d2
channel d2: SID=533 device type=DISK
allocated channel: d3
channel d3: SID=532 device type=DISK
allocated channel: d4
channel d4: SID=531 device type=DISK
allocated channel: a1
channel a1: SID=530 device type=DISK
executing command: SET until clause
Starting Duplicate Db at 15-JUN-11
RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
contents of Memory Script:
set until scn 260398799;
set newname for datafile 1 to
"+data";
set newname for datafile 2 to
"+data";
set newname for datafile 3 to
"+data";
set newname for datafile 4 to
"+data";
set newname for datafile 5 to
"+data";
set newname for datafile 6 to
"+data";
set newname for datafile 7 to
"+data";
set newname for datafile 8 to
"+data";
set newname for datafile 9 to
"+data";
set newname for datafile 10 to
"+data";
set newname for datafile 11 to
"+data";
set newname for datafile 12 to
"+data";
set newname for datafile 13 to
"+data";
set newname for datafile 14 to
"+data";
set newname for datafile 15 to
"+data";
set newname for datafile 16 to
"+data";
set newname for datafile 17 to
"+data";
set newname for datafile 18 to
"+data";
set newname for datafile 19 to
"+data";
set newname for datafile 20 to
"+data";
set newname for datafile 21 to
"+data";
set newname for datafile 22 to
"+data";
set newname for datafile 23 to
"+data";
set newname for datafile 24 to
"+data";
set newname for datafile 25 to
"+data";
set newname for datafile 26 to
"+data";
set newname for datafile 27 to
"+data";
set newname for datafile 28 to
"+data";
set newname for datafile 29 to
"+data";
set newname for datafile 30 to
"+data";
set newname for datafile 31 to
"+data";
set newname for datafile 32 to
"+data";
set newname for datafile 33 to
"+data";
set newname for datafile 34 to
"+data";
set newname for datafile 35 to
"+data";
set newname for datafile 36 to
"+data";
set newname for datafile 37 to
"+data";
set newname for datafile 38 to
"+data";
set newname for datafile 39 to
"+data";
set newname for datafile 40 to
"+data";
set newname for datafile 41 to
"+data";
set newname for datafile 42 to
"+data";
set newname for datafile 43 to
"+data";
set newname for datafile 44 to
"+data";
set newname for datafile 45 to
"+data";
set newname for datafile 46 to
"+data";
set newname for datafile 47 to
"+data";
set newname for datafile 48 to
"+data";
set newname for datafile 49 to
"+data";
set newname for datafile 50 to
"+data";
set newname for datafile 51 to
"+data";
set newname for datafile 52 to
"+data";
set newname for datafile 53 to
"+data";
set newname for datafile 54 to
"+data";
set newname for datafile 55 to
"+data";
set newname for datafile 56 to
"+data";
set newname for datafile 57 to
"+data";
set newname for datafile 58 to
"+data";
set newname for datafile 59 to
"+data";
set newname for datafile 60 to
"+data";
set newname for datafile 61 to
"+data";
set newname for datafile 62 to
"+data";
set newname for datafile 63 to
"+data";
set newname for datafile 64 to
"+data";
set newname for datafile 65 to
"+data";
set newname for datafile 66 to
"+data";
set newname for datafile 67 to
"+data";
set newname for datafile 68 to
"+data";
set newname for datafile 69 to
"+data";
set newname for datafile 70 to
"+data";
set newname for datafile 71 to
"+data";
set newname for datafile 72 to
"+data";
set newname for datafile 73 to
"+data";
set newname for datafile 74 to
"+data";
set newname for datafile 75 to
"+data";
set newname for datafile 76 to
"+data";
set newname for datafile 77 to
"+data";
set newname for datafile 78 to
"+data";
set newname for datafile 79 to
"+data";
set newname for datafile 80 to
"+data";
set newname for datafile 81 to
"+data";
set newname for datafile 82 to
"+data";
set newname for datafile 83 to
"+data";
set newname for datafile 84 to
"+data";
set newname for datafile 85 to
"+data";
set newname for datafile 86 to
"+data";
set newname for datafile 87 to
"+data";
set newname for datafile 88 to
"+data";
set newname for datafile 89 to
"+data";
set newname for datafile 90 to
"+data";
set newname for datafile 91 to
"+data";
set newname for datafile 92 to
"+data";
set newname for datafile 93 to
"+data";
set newname for datafile 94 to
"+data";
set newname for datafile 95 to
"+data";
set newname for datafile 96 to
"+data";
set newname for datafile 97 to
"+data";
set newname for datafile 98 to
"+data";
set newname for datafile 99 to
"+data";
set newname for datafile 100 to
"+data";
set newname for datafile 101 to
"+data";
set newname for datafile 102 to
"+data";
set newname for datafile 103 to
"+data";
set newname for datafile 104 to
"+data";
set newname for datafile 105 to
"+data";
set newname for datafile 106 to
"+data";
set newname for datafile 107 to
"+data";
set newname for datafile 108 to
"+data";
set newname for datafile 109 to
"+data";
set newname for datafile 110 to
"+data";
set newname for datafile 111 to
"+data";
set newname for datafile 112 to
"+data";
set newname for datafile 113 to
"+data";
set newname for datafile 114 to
"+data";
set newname for datafile 115 to
"+data";
set newname for datafile 116 to
"+data";
set newname for datafile 117 to
"+data";
set newname for datafile 118 to
"+data";
set newname for datafile 119 to
"+data";
set newname for datafile 120 to
"+data";
set newname for datafile 121 to
"+data";
set newname for datafile 122 to
"+data";
restore
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 15-JUN-11
released channel: d1
released channel: d2
released channel: d3
released channel: d4
released channel: a1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/15/2011 11:21:42
RMAN-01005: not all datafiles have backups that can be recovered to scn 260398799
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 122 found to restore
RMAN-06023: no backup or copy of datafile 121 found to restore
RMAN-06023: no backup or copy of datafile 120 found to restore
RMAN-06023: no backup or copy of datafile 119 found to restore
RMAN-06023: no backup or copy of datafile 118 found to restore
RMAN-06023: no backup or copy of datafile 117 found to restore
RMAN-06023: no backup or copy of datafile 116 found to restore
RMAN-06023: no backup or copy of datafile 115 found to restore
RMAN-06023: no backup or copy of datafile 114 found to restore
RMAN-06023: no backup or copy of datafile 113 found to restore
RMAN-06023: no backup or copy of datafile 112 found to restore
RMAN-06023: no backup or copy of datafile 111 found to restore
RMAN-06023: no backup or copy of datafile 110 found to restore
RMAN-06023: no backup or copy of datafile 109 found to restore
RMAN-06023: no backup or copy of datafile 108 found to restore
RMAN-06023: no backup or copy of datafile 107 found to restore
RMAN-06023: no backup or copy of datafile 106 found to restore
RMAN-06023: no backup or copy of datafile 105 found to restore
RMAN-06023: no backup or copy of datafile 104 found to restore
RMAN-06023: no backup or copy of datafile 103 found to restore
RMAN-06023: no backup or copy of datafile 102 found to restore
RMAN-06023: no backup or copy of datafile 101 found to restore
RMAN-06023: no backup or copy of datafile 100 found to restore
RMAN-06023: no backup or copy of datafile 99 found to restore
RMAN-06023: no backup or copy of datafile 98 found to restore
RMAN-06023: no backup or copy of datafile 97 found to restore
RMAN-06023: no backup or copy of datafile 96 found to restore
RMAN-06023: no backup or copy of datafile 95 found to restore
RMAN-06023: no backup or copy of datafile 94 found to restore
RMAN-06023: no backup or copy of datafile 93 found to restore
RMAN-06023: no backup or copy of datafile 92 found to restore
RMAN-06023: no backup or copy of datafile 91 found to restore
RMAN-06023: no backup or copy of datafile 90 found to restore
RMAN-06023: no backup or copy of datafile 89 found to restore
RMAN-06023: no backup or copy of datafile 88 found to restore
RMAN-06023: no backup or copy of datafile 87 found to restore
RMAN-06023: no backup or copy of datafile 86 found to restore
RMAN-06023: no backup or copy of datafile 85 found to restore
RMAN-06023: no backup or copy of datafile 84 found to restore
RMAN-06023: no backup or copy of datafile 83 found to restore
RMAN-06023: no backup or copy of datafile 82 found to restore
RMAN-06023: no backup or copy of datafile 81 found to restore
RMAN-06023: no backup or copy of datafile 80 found to restore
RMAN-06023: no backup or copy of datafile 79 found to restore
RMAN-06023: no backup or copy of datafile 78 found to restore
RMAN-06023: no backup or copy of datafile 77 found to restore
RMAN-06023: no backup or copy of datafile 76 found to restore
RMAN-06023: no backup or copy of datafile 75 found to restore
RMAN-06023: no backup or copy of datafile 74 found to restore
RMAN-06023: no backup or copy of datafile 73 found to restore
RMAN-06023: no backup or copy of datafile 72 found to restore
RMAN-06023: no backup or copy of datafile 71 found to restore
RMAN-06023: no backup or copy of datafile 70 found to restore
RMAN-06023: no backup or copy of datafile 69 found to restore
RMAN-06023: no backup or copy of datafile 68 found to restore
RMAN-06023: no backup or copy of datafile 67 found to restore
RMAN-06023: no backup or copy of datafile 66 found to restore
RMAN-06023: no backup or copy of datafile 65 found to restore
RMAN-06023: no backup or copy of datafile 64 found to restore
RMAN-06023: no backup or copy of datafile 63 found to restore
RMAN-06023: no backup or copy of datafile 62 found to restore
RMAN-06023: no backup or copy of datafile 61 found to restore
RMAN-06023: no backup or copy of datafile 60 found to restore
RMAN-06023: no backup or copy of datafile 59 found to restore
RMAN-06023: no backup or copy of datafile 58 found to restore
RMAN-06023: no backup or copy of datafile 57 found to restore
RMAN-06023: no backup or copy of datafile 56 found to restore
RMAN-06023: no backup or copy of datafile 55 found to restore
RMAN-06023: no backup or copy of datafile 54 found to restore
RMAN-06023: no backup or copy of datafile 53 found to restore
RMAN-06023: no backup or copy of datafile 52 found to restore
RMAN-06023: no backup or copy of datafile 51 found to restore
RMAN-06023: no backup or copy of datafile 50 found to restore
RMAN-06023: no backup or copy of datafile 49 found to restore
RMAN-06023: no backup or copy of datafile 48 found to restore
RMAN-06023: no backup or copy of datafile 47 found to restore
RMAN-06023: no backup or copy of datafile 46 found to restore
RMAN-06023: no backup or copy of datafile 45 found to restore
RMAN-06023: no backup or copy of datafile 44 found to restore
RMAN-06023: no backup or copy of datafile 43 found to restore
RMAN-06023: no backup or copy of datafile 42 found to restore
RMAN-06023: no backup or copy of datafile 41 found to restore
RMAN-06023: no backup or copy of datafile 40 found to restore
RMAN-06023: no backup or copy of datafile 39 found to restore
RMAN-06023: no backup or copy of datafile 38 found to restore
RMAN-06023: no backup or copy of datafile 37 found to restore
RMAN-06023: no backup or copy of datafile 36 found to restore
RMAN-06023: no backup or copy of datafile 35 found to restore
RMAN-06023: no backup or copy of datafile 34 found to restore
RMAN-06023: no backup or copy of datafile 33 found to restore
RMAN-06023: no backup or copy of datafile 32 found to restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 25 found to restore
RMAN-06023: no backup or copy of datafile 24 found to restore
RMAN-06023: no backup or copy of datafile 23 found to restore
RMAN-06023: no backup or copy of datafile 22 found to restore
RMAN-06023: no backup or copy of datafile 21 found to restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN> Exit
Recovery Manager complete.
Edited by: kerrygm on Jun 15, 2011 11:36 AM

Maybe making progress.
I got into RMAN and did a List backup command. In looking at the output, I see that it does have the 5/20 backup showing. Here is part of the output:
BS Key Type LV Size Device Type Elapsed Time Completion Time
965689 Full 19.86M DISK 00:00:01 16-JUN-11
BP Key: 967942 Status: AVAILABLE Compressed: NO Tag: TAG20110616T231223
Piece Name: F:\BACKUPS\CSPROD\C-368871413-20110616-01
SPFILE Included: Modification time: 16-JUN-11
SPFILE db_unique_name: CSPROD
Control File Included: Ckp SCN: 369596068 Ckp time: 16-JUN-11
BS Key Size Device Type Elapsed Time Completion Time
966218 403.84M DISK 00:00:00 20-MAY-11
BP Key: 967842 Status: AVAILABLE Compressed: YES Tag: TAG20110520T231012
Piece Name: F:\BACKUPS\CSPROD\A1\CSPROD_ARCH_5844
List of Archived Logs in backup set 966218
Thrd Seq Low SCN Low Time Next SCN Next Time
1 2112 237027300 20-MAY-11 237046947 20-MAY-11
1 2113 *237046947* 20-MAY-11 237059284 20-MAY-11
1 2114 237059284 20-MAY-11 237216514 20-MAY-11
1 2115 237216514 20-MAY-11 237709545 20-MAY-11
1 2116 237709545 20-MAY-11 237722825 20-MAY-11
1 2117 237722825 20-MAY-11 237730431 20-MAY-11
1 2118 237730431 20-MAY-11 237860199 20-MAY-11
I then changed my rman script to use the *237046947* SCN number that says it is from 5/20. I them kicked off my rman script and got the following result.
Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
Recovery Manager11.1.0.7.0
RMAN> #connect catalog 'rmancat/rmancat@rmancat';
2> # target is the source and auxiliary is destination
3> #connect target sys/<pwd>@csprod
4> #connect auxiliary /
5>
6> run {
7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
12> ##Archivelog number get from sql archive log list command
13> set until sequence 237046947;
14> ##set until time "to_date('2011-05-20 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
15> duplicate target database to CSPRSUM1 nofilenamecheck
16> logfile
17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
20> }
allocated channel: d1
channel d1: SID=532 device type=DISK
allocated channel: d2
channel d2: SID=533 device type=DISK
allocated channel: d3
channel d3: SID=531 device type=DISK
allocated channel: d4
channel d4: SID=555 device type=DISK
allocated channel: a1
channel a1: SID=534 device type=DISK
executing command: SET until clause
Starting Duplicate Db at 17-JUN-11
RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
contents of Memory Script:
set until scn 373021170;
set newname for datafile 1 to
"+data";
set newname for datafile 2 to
Starting restore at 17-JUN-11
channel d1: starting datafile backup set restore
channel d1: specifying datafile(s) to restore from backup set
channel d1: restoring datafile 00003 to +DATA
channel d2: restoring datafile 00122 to +DATA
channel d2: reading from backup piece F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149
channel d3: starting datafile backup set restore
channel d3: specifying datafile(s) to restore from backup set
channel d3: restoring datafile 00002 to +DATA
channel d3: restoring datafile 00020 to +DATA
channel d4: restoring datafile 00120 to +DATA
channel d4: reading from backup piece F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147
channel d1: piece handle=F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 tag=TAG20110616T230013
channel d1: restored backup piece 1
channel d1: restore complete, elapsed time: 00:01:15
channel d4: piece handle=F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147 tag=TAG20110616T230013
channel d4: restored backup piece 1
channel d4: restore complete, elapsed time: 00:03:15
channel d2: piece handle=F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149 tag=TAG20110616T230013
channel d2: restored backup piece 1
channel d2: restore complete, elapsed time: 00:03:35
channel d3: piece handle=F:\BACKUPS\CSPROD\D1\CSPROD_DATA_6146 tag=TAG20110616T230013
channel d3: restored backup piece 1
channel d3: restore complete, elapsed time: 00:04:55
Finished restore at 17-JUN-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "CSPRSUM1" RESETLOGS ARCHIVELOG
MAXLOGFILES 23
MAXLOGMEMBERS 3
MAXDATAFILES 1021
MAXINSTANCES 8
MAXLOGHISTORY 584
LOGFILE
GROUP 1 ( '+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log' ) SIZE 50 M ,
GROUP 2 ( '+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log' ) SIZE 50 M ,
GROUP 3 ( '+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log' ) SIZE 50 M
DATAFILE
'+DATA/csprsum1/datafile/system.1535.754067379'
CHARACTER SET WE8MSWIN1252
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy RECID=1 STAMP=754067676 file name=+DATA/csprsum1/datafile/sysaux.1536.754067379
datafile 121 switched to datafile copy
input datafile copy RECID=120 STAMP=754067677 file name=+DATA/csprsum1/datafile/waapp.1653.754067403
datafile 122 switched to datafile copy
input datafile copy RECID=121 STAMP=754067677 file name=+DATA/csprsum1/datafile/cu_custom.1549.754067381
contents of Memory Script:
set until scn 373021170;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 17-JUN-11
starting media recovery
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '+DATA/csprsum1/datafile/system.1535.754067379'
released channel: d1
released channel: d2
released channel: d3
released channel: d4
released channel: a1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/17/2011 15:14:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 3818 and starting SCN of 372868482 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3817 and starting SCN of 372685133 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3816 and starting SCN of 372593528 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3815 and starting SCN of 372374385 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3814 and starting SCN of 372325053 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3813 and starting SCN of 372316138 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3812 and starting SCN of 372249619 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3811 and starting SCN of 371775981 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3810 and starting SCN of 371643855 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3809 and starting SCN of 371614442 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3808 and starting SCN of 371432892 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3807 and starting SCN of 371121955 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3806 and starting SCN of 371047786 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3805 and starting SCN of 371029095 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3804 and starting SCN of 371018252 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3803 and starting SCN of 370947755 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3802 and starting SCN of 370857440 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3801 and starting SCN of 370814417 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3800 and starting SCN of 370797061 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3799 and starting SCN of 370756569 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3798 and starting SCN of 370746833 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3797 and starting SCN of 370746693 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3796 and starting SCN of 370746568 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3795 and starting SCN of 370746068 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3794 and starting SCN of 370745451 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3793 and starting SCN of 370733767 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3792 and starting SCN of 370674629 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3791 and starting SCN of 370501026 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3790 and starting SCN of 370498513 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3789 and starting SCN of 370497977 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3788 and starting SCN of 370497635 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3787 and starting SCN of 370497319 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3786 and starting SCN of 370496938 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3785 and starting SCN of 370495428 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3784 and starting SCN of 370491173 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3783 and starting SCN of 370390074 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3782 and starting SCN of 370385574 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3781 and starting SCN of 370385310 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3780 and starting SCN of 370385044 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3779 and starting SCN of 370368486 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3778 and starting SCN of 370333960 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3777 and starting SCN of 370330980 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3776 and starting SCN of 370327876 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3775 and starting SCN of 370174433 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3774 and starting SCN of 370148373 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3773 and starting SCN of 370147821 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3772 and starting SCN of 370147623 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3771 and starting SCN of 370141528 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3770 and starting SCN of 369711271 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3769 and starting SCN of 369621694 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3768 and starting SCN of 369595614 found to restore
RMAN> Exit
Recovery Manager complete.
What I am not sure is if the SCN I used in my set until sequence command was from 5/20, when I look at the backup pieces that it is reading to restore from, they appear to be from backup files taken from June.
(e.g channel d1: reading from backup piece F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 -- this is a 6/16 backup file).
Also, as you can see it was not able to do a media recovery.
Thanks in advance for your help.

Can't find data-generator

Similar Messages

Maybe you are looking for