Can't find Deskjet Ink Advantage 4615 drivers for Windows Server

Hi,
We've just bought a Deskjet 4615, mostly to work as a backup for our Laserjet and to have a multipage scanning capability.
This All-in-One would be connected to our server (Windows Server 2008 Foundations R2), so it would be accessible via TS.
However, although the printing and fax drivers work, the scanning one doesn't. I can't even install the software which came in the CD.
Any help on this matter?
Kind regards,
- Ricardo

Hey rcorreia,
If you are looking for the .inf files and cab files for the install package, then these can be extracted from the .exe file one downloads.  You could try downloading the drivers you mentioned and use a program such as 7-zip to open the archived file.  Inside you will find a SETUP folder containing these .inf files and cab files you are describing.  These may not work with your system, but this is how you can access the file types you are looking for.
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

  • I am unable to Print in Colour - Mac to HP Deskjet Ink Advantage 4615 printer ? help please

    I am unable to Print in colour - Mac to HP Deskjet Ink Advantage 4615, all the test pages print in colour but not anything else . Help Please

    Hello and welcome benjas96,
    I can appreciate your dilemma.  I would recommend contacting our technical support group to get this ironed out.  This is not to say it is not possible, however there are some basics that will need to be isolated and confirmed first.
    Please feel free to contact us and they will be glad to help.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HP Deskjet Ink Advantage 4615

    Hi, I just purchase a HP Deskjet Ink Advantage 4615.
    The problem is when the printer goes into sleep mode, it will not automatic wake up.
    I need to switch off the power and on it back again.
    Is there any way to disable the sleep mode?
    The sleep mode only hav 5 mins sleep, 10 mins sleep and 15 mins sleep.
    Please assist.
    Thank you very much
    Terence

    Hello Noob,
    I'm sorry to hear about the frustrating experience with your Deskjet 4615 printer not function correctly for you. I would like to help you.
    I am unsure of a few things and would greatly appreciate if you could respond with some information.
    I would like to know the following:
    Which Operating System are you running? Windows or Mac
    Where you able to successfully install the software/driver, or did you see the installation stop or give an error message?
    In the meantime, here are a few things you can try:
    Reset your Printer and Restart your computer.
    If you are running a Windows Operating System, download and run the Print and Scan Doctor which will search for printing and scanning issues and either correct them or tell you where the issue is so you can better target where the problem is coming from.
    Hope to hear from you shortly!
    Take care
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Deskjet ink advantage 4615 fax error

    I recently been having problems with the fax option on my deskjet ink advantage 4615 all-in-one. When I try to use it, I get an error saying "This feature has been disabled. For more information, contact the administrator."
    I have tried restoring to factory default and it still does not make a differerence. Can anyone assist?

    @mikecshammond, Welcome to the forums!
    I understand you are unable to fax from your Deskjet Ink Advantage due to an error message you are receiving, and I wanted to make my own suggestions for you that might help.
    I would recommend resetting the printer, and also make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power.
    Reset Instructions:
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Test now to see if you can send a fax, and if there are any issues or errors, run through the troubleshooting in this guide following the steps in order:
    HP Officejet 4610 All-in-One, Officejet 4620, Deskjet Ink Advantage 4610, and Deskjet Ink Advantage ...
    If the issue persists, give us a call directly to see what your next options are!
    Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    If you wish to thank me for my efforts to help, click the below.
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Can't find the driver of laserjet p4015dn for windows XP

    I can't find the driver of laserjet p4015dn for windows XP. Where can I download it?

    Have you gane to the Windows Update website to see if there was a Synaptics Touch Pad Driver made available by  Microsoft? Although I did my 8.1 upgrade a while back, I seem to recall such a update was available. 
    Otherwise if my memory is in error, you can always go right to the Synaptic website and download and install their latest driver.  Here is the link.......
    http://www.synaptics.com/resources/drivers
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Where can I find direct downloads of adobe Reader for Windows or Macintos

    Where can I find direct downloads of adobe Reader for Windows or Macintos last version
    thanks
    [spam link removed]

    Hi Kany,
    You can find the older versions of Adobe Reader at Adobe - Adobe Reader download - All versions.
    or
    All updates at:
    Adobe - Adobe Reader : For Windows
    Adobe - Adobe Reader : For Macintosh
    Thank you.
    Tomoko

  • How can I find fingerprint reader driver and software for windows 8.1 Pro - HP Dv5 1225et

    I have Hp dv5 1225et Laptop. There are drivers in Hp's web site for win 7 and vista.. I need validity sensors driver and software for windows 8.1 Pro (64Bit)... Thanks a lot all of users. 

    Hi @mfatihbodur
    Welcome to the HP Support Community. I see that you are looking for Windows 8.1 version of your Validity Sensor and SimplePass software. I have included the links below but as your model doesn't have drivers I can't guarantee that they will work but they are the latest versions.
    Validity Fingerprint Sensor Driver (Windows 8.1)
    HP SimplePass Identity Protection Software (Windows 8.1)
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Where can I find Java As installation try version for window?

    The snd\download only have version for Unix. Can any one help me to find one for window? Thank you very much.

    See at CE (Composition Environment) download page:
    http://www.sdn.sap.com/irj/scn/nw-ce-downloads

  • Drivers for Windows Server 2008 and HDD issues

    Recently I have had the hard drive with my OS fail. After replacing the hard drive and reinstalling windows server 2008 I seem to have run into a few issues with drivers.  After insalling Windows, I had 3 items in my device manager that did not install properly. I was able to get the driver for the LAN port to work but I have not gotten the driver for "Standard VGA Graphics Adapter" and "SM Bus Controller". After a little research, I believe the video card is a Radeon HD4350. With that information I still have been unable toinstlal the correct drivers for either of these items. I've tried several drivers listed on the drivers support page on HP's website but all fo them return the same error about not finding the correct Operating System. The link to the driver I used originally on my previous installation seems to not be valid any longer.
    Also I can't seem to access the two additoinal hard drives (connected by sata). They were used with the previous installation of windows with no issues. They appear in the device manager but do not show up under My Computer. A removeable drive does show up that I'm not sure what it is. Previously I had used software to mirror one of the drives onto the other as to prevent losing data if a drive would fail. Is one of the above drives causing the issue with not being able to access the drives or did the software used before cause the problem?
    Any help on these issues is greatly appreciated.
    This question was solved.
    View Solution.

    OK.
    I can't help you with the drives then.  That is out of my realm of knowledge.  If they are marked healthy and active in the disk management utility, then that is all I know that they should be indicated.
    As for the graphics driver...
    Download and install this free file utility.
    http://www.7-zip.org/
    After you install 7-zip, right click on the graphics driver file and select 7-zip from the list of options.
    Select 7-zip to Extract to: and let it extract the file into a folder.  I let it extract to the file name of the folder.
    Then just follow the rest of my instructions to install the driver. 
    Of course you will first browse to where 7-zip has extracted the folder to, and proceed from there.

  • HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2

    I bought an HP Pavilion p7-1451 so I could have an affordable, yet reasonably powerful machine to put a server software development environment on (I'm a software engineer).
    It came with Windows 8, but I needed Windows Server 2008 R2, which I own through an MSDN subscription.  I did what I always do in these cases, re-partioned the hard drive, re-formatted, and installed the new operating system.
    I have nearly all devices working properly, but it still won't recognize the USB 3.0 ports and the Bluetooth device.  I searched everywhere but cannot find anything that will work.  Anything from the HP site is targeted for either Windows 7 or 8, and when trying either one of those, it tells me "Your system does not meet the operating system requirements"  and MSI does not publish any drivers at all for this particular motherboard (that I can find anyway).
    Motherboard:  MSI MS-7778  also known as: MSI 2AEO version 1.0
    BIOS:  AMI 8.12
    This is the list of "Other devices" in Device Manager that Windows doesn't recognize:
        BCM20702A0
        Universal Serial Bus (USB) Controller
        Universal Serial Bus (USB) Controller
    Bluetooth Device ID:  USB\VID_0A5C&PID_21F1&REV_0012
    USB Controller device ID:  PCI\VEN_1022&DEV_7812&SUBSYS_2AE0103C&REV_03
    Windows still doesn't recognize them after allowing it to search the internet.
    And I've googled all over the place and I'm not getting anywhere.
    Does anyone have any advice?
    Any chance this could be related to the BIOS?
    I'm not having any luck finding a BIOS download for this motherboard either.
    Any help is much appreciated!
    This question was solved.
    View Solution.

    Holy crap, it worked!!
    My version number was slightly different in the .inf files, but I dropped the last ".1" off the end and that did the trick!
    So, the steps were:
    Get and extract the driver files:
    1. Download the AMD Chipset Drivers file from here:
          http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2
          (choose the first download in the list.  It's called "AMD Chipset Drivers")
    2. Download and install 7-Zip from here:
          http://7-zip.org/download.html
    3.  Right click the  13-4_vista_win7_win8_32-64_sb.exe  chipset file, select "7-Zip", then choose "Extract Here"
    Install the USB Host Controller driver:
    1. Open the USB Controller .inf file in Notepad from the following location:
        13-4_vista_win7_win8_32-64_sb\Packages\Drivers\SBDrv\hseries\USB30\amdxhc\W764A\amdxhc.inf
    2. Find all instances of:  .5.1.1   and replace with:  .5.1
         and save and close the file.
    3. In Device Manager, right click the first unknown "Universal Serial Bus (USB) Controller" and choose "Update Driver Software..."
    4. Choose "Browse my computer for driver software", navigate to the directory in Step 1, and click Next.
    5. Accept any warnings and choose to Install anyway...
    It should recognize and install the USB Controller driver (finally progress!)
    Repeat the same steps above for any other USB 3.0 controllers that are unrecognized.
    The devices should now say "Unknown device" instead of "Universal Serial Bus (USB) Controller".
    Windows recognizes your controllers now, but not the USB root hubs.
    For each of those "Unknown device" entries, do this to install the USB 3.0 Root Hub:
    1. Open the USB Hub .inf file in Notepad from the following location: (notice that it's a different directory)
        13-4_vista_win7_win8_32-64_sb\Packages\Drivers\SBDrv\hseries\USB30\amdhub\W764A\amdhub30.inf
    2. Find all instances of:  .5.1.1   and replace with:  .5.1
         and save and close the file.
    3. In Device Manager, right click the first "Unknown device" and choose "Update Driver Software..."
    4. Choose "Browse my computer for driver software", navigate to the directory in Step 1, and click Next.
    5. Accept any warnings and choose to Install anyway...
    I plugged in a USB 3.0 hard drive, and at first it didn't seem to work.  I tried another port and still nothin.  But after about 40 seconds the drive was recognized and all is well.  Yay!
    Thank you Paul for your help!
    Hopefully this post will help others too.
    USB 3.0 on a fresh install of Windows Server 2008 R2.
    That was easy.  :-P

  • Lenovo SL510 Drivers for Windows Server 2008R2

    Hello guys,
    I am not sure that this is the right topic but I`ll shoot
    I need to install Windows Server 2008R2 on my machine but i cannot find the appropriate drivers anywhere.
    Anyone of you ever tried this?
    Thank you in advance!
    KR,
    Ognyan Guglev

    Thanks, but how can i do to download this archive?
    best regards!
    Adrian

  • 64-bit OLE drivers for Windows Server 2008-R2

    Hello,
    Oracle DB=10.2.0.4 installed on RHL=5
    Applications access vis Oracle OLE. Currently, we are updating to Windows 2008 Server (64-bit). I have heard that there are no 64-bit drivers from Oracle, right or wrong? If it is wrong, could you please provide me the link to download it.
    If it's not possible, what alternative is there, or any directions from Oracle? ... A re-programmed to ODBC or web services,etc is unfortunately not possible.
    Thanks a lot for your help
    Regards..
    Edited by: John-M on Jun 1, 2012 7:14 AM

    Hello Greg,
    Thank you for the reply. I would appreciate if you could elaborate a bit more please.
    There is a 64 bit version of OraOledb that installs with the 64 bit client.Which DB Client for Microsoft 64-bit from the following Oracle site should work for database 10.2.0.4 version? Is the higher version of 64-bit Client version works with lower version of Database Server?
    http://www.oracle.com/technetwork/topics/winx64soft-089540.html
    There is no 64 bit oo4o, and it's not supported to use 32 bit oo4o on a 64 bit OS (although it seems to work).If there is no 64-bit Oracle Object for OLE, then what is the recommended way or workaround when using with Microsoft Windows Server 2008 R2 64-bit?
    Thank you very much.
    Regards..
    Edited by: John-M on Jun 4, 2012 2:33 AM

  • Deskjet ink advantage 4615 will not print in black

    Hello,
    I replaced the black ink cartridge a week ago and it worked fine until today.  The printer indicates that the cartridge is full. Today it faded out in the middle of a print and will not return. I have tried all the cleaning procedures recommended by HP with no success. I have also checked that the vent is not blocked.
    Operating sys: Win 7 , 32 bit
    Warranty expired dec 2013
    Any suggestions how I should proceed would be welcome
    This question was solved.
    View Solution.

    Hi arifle,
    Have a look at the troubleshooting document linked below:
    Officejet 4610 / 4620:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=ie&​lc=en&dlc=en&docname=c03944809
    I'd suggest reading from solution 3 down.  You have already stepped through solutions 1&2.
    If none of that works then it would probably be a good idea to contact HP support in your area.  Here is a link to contact numbers:
    http://welcome.hp.com/country/us/en/wwcontact_us.html
    I hope that this helps.
    ---- If my answer was helpful please click the Kudos star.
    If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
    (I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

  • Where can I find the iPhone Web Configuration util for Windows?

    Hi,
    Struggling at the moment with the iPhone Config Util v2 on Windows - I can't get our Exchange account settings to stick. I have previously used the web configuration and that worked everytime, but now I've lost my installation somewhere. Saying that, that was on v1/v2 iPhones.
    Where can I download this older utility?
    Is there an issue with the new configuration util and v3 phones? Does the new configuration work with self-signed certificates? Ours just seems to report authentication errors when trying to set the profile up.
    Any ideas?
    Neil

    I just contacted Fedex and they advised that a MSDS is not required with shipments of iPhones to/from the US.

  • HP Deskjet Ink Advantage 2545 Printer driver for windows xp x64

    Hi,
    Can anyone provide me driver to install HP Deskjet Ink Advantage 2545 Printer on Windows XP 64 bit o/s? This printer comes with XP 32bit driver only.
    Thanks,
    Chinmoy

    Hello Chinmoy247, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are looking into driver options.  I would like to help.
    I would recommend downloading and running the HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers for Windows XP.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

Maybe you are looking for

  • Any body who can solve it

    1).I want to call oracle graphics app. from oracle forms6. 2).Same as above with parameters. Thanx in advance!

  • Can i take out the motherboard and CPU and replace it with a newer one?

    I was wondering if i could take out the CPU and Motherboard of an early 2011 13" macbook pro with a 2.3GHz dual core i5, and replace it with a 2012 2.9GHz 13" dual core i7? I don't care about the costs but i just want to know if it's possible? I've u

  • MPLS network CE1A pinging CE1B other side

    Im trying to expand my knowledge about MPLS but have a bunch of questions. Here is one. In a MPLS network, should the CEA1 from one side ping the the other CEB1 and viceversa? I can see the route in the routing table from both side, however ping does

  • Maxmize window when run Report builder 10gR2

    Thanks in advance to all, I have read of a post in which he treated maxmize window when run Report builder 10gR2, but I don't succeed in finding it. Can someone point out me the link? PS. I have already post on Form Forum

  • Exporting Frames as JPGs?

    Hey Guys, I'm trying to export a few frames as JPGs from iMovie HD. Is this possible? It seems like such a simple function, yet i see it no where. any help or advice? Thanks!