Can't find disk drive connected to airport extreme

I have airport extreme 802.11n gigabite connected to a usb hub and a hard disk connected to the usb hub.. The disk is a usb disk drive the disk doen't show on the desk top and disk utility doesn't show them
help

If the hard disk shows up when it is connected directly to the base station, then I would try a different powered hub.
Otherwise, the hard disk drive may not be compatible, or perhaps it is incorrectly formatted as NTFS.

Similar Messages

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

Can't find the harddrive connected to AirPort Extreme from NETGEAR EVA9100

Hey all,
Like the subject sais... I have a setup in my appartment where I have a USB Harddrive connected to my AirPort Extreme. I put my media on that disk, and now I want to access these files from my new NETGEAR EVA9100 media streamer, but for some reason it can't find the harddrive in my network.. My MBP has no problems finding it, nor have any other computers. I have tried numerous ways of sharing the disk through the airport software, but for some reason it just won't work.
Does anyone have an idea what I need to do..?

If the hard disk shows up when it is connected directly to the base station, then I would try a different powered hub.
Otherwise, the hard disk drive may not be compatible, or perhaps it is incorrectly formatted as NTFS.

Can multiple devices access drives connected to Airport extreme at the same time?

i have a few days to decide before someone gets me either an airport extreme or a decent NAS adapater to using with my existing airport express, from the US. my airport express serves me good for all my networking needs but i have decided to take my portable media wireless.
i wanna know which will be the best option? to plug in the portable hdds to an a.extreme via a usb hub and share it across devices or to do the same with a nas adapter using my existing current generation a.express?
i got ios, android, mac and windows devices on my network. and an apple tv.
please share ur thoughts.
Neerav

Express is slow ethernet.. 10/100 only. The max speed of any connection to a USB hard disk is limited severely by the 100mbit..
USB is always slow btw.. This is actually a poor way to share a drive. A cheap NAS.. ie ethernet to Sata directly is far far superior and a single disk NAS can be had cheaply.. you will never get close with USB in network situations.
If you use a hub though, you can plug multiple disks into an Extreme.. I guess the network speed is at least no worse than the USB hub -- ethernet devices which are lousy as a whole.
Never forget you have the fastest ethernet adapters and fastest possible connectors already on computers on the network.. people are so utterly mesmerized by NAS they forget.. a FW800 or better USB3 if you have a newer computer shared to the network from a computer has much higher throughput and is much cheaper than even the very low end network stand alone boxes.

Can't find hard drive shared using Airport Extreme

Hi,
I just bought a Airport Extreme and set it up to access the internet. However I am having trouble sharing my external hard drive. I followed the instructions in the manuals but can't see or find my "shared" hard drive on my Mac Air or PC?? I have open Finder but there is now shared drop down menu?
I am fairly new at this so I am sure it is something small I am doing wrong. Hope some one can help me!!

thepescador wrote:
This set up was suggested to me by an Apple Store employee when I was shopping for my AirPort Extreme and that same employee seemed to indicate that this was how they actually performed their backups at the Apple Store, so obviosuly I was surprised to find information online that states it is not officially supported.
Yes, unfortunately we've had a number of reports of similar statements by folks at the Apple stores.
As Tesserax says, sometimes it works, sometimes it doesn't. That's probably why Apple doesn't support it. See Using Time Machine with an Airport Extreme Air Disk (or use the link in *User Tips* at the top of this forum).
In my case, it worked flawlessly for about 3 months, then every couple of days the backups would come up corrupted. Once, +Disk Utility+ was able to fix it; another time, +Disk Warrior+ could. The other times, the only solution was to erase and start over. Since then, it's worked well, although very slowly on occasion. And that's all with exactly the same hardware, in exactly the same locations. (And the disk is a Seagate Free Agent Pro, too.)
This forum, and the Time Machine forums, have any number of similar reports.
I'd strongly suggest you either:
Return the Airport (and perhaps the disk) to the store. Insist on a full refund because of bad advice, and refer them to the Apple article.
Take your chances, but by all means keep some sort of secondary backups. See #27 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of the +Time Machine+ forum), for some recommendations.

Time Machine doesnt see my USB drive, connected to Airport extreme =(

Hello,
I've been trying to figure this one out for almost 3 weeks now, but with no luck. I have a usb hard drive, connected to airport extreme. I've clicked on "setup time machine", select "choose disk", there is no disk to select. So I click on the "set up time capsule, it takes me to airport utility. I then click on the "disk" button and file sharing is enabled.
I can mount the disk through the finder, just fine and able to transfer files back and forth, however time machine cant seem to pick up the drive. Would love to be able to use time machine to do backups, So can someone please help?
osx 10.5.5 with airport utility 5.3.2
Thanks in advance!

Well this has worked for me. I have a Freecom 500Gb usb hard Drive connected through an unpowered 4-way USBhub to an Airport Extreme Base station. After mounting the Air Disk hard drive on my powerbook, I then dragged the disk to my user folder, thereby creating an alias. I have put that alias in my login items and now TimeMachine works beautifully. I've repeated it on a Mac Mini (also using OSX 10.5.5) and that seems to be fine too. Admittedly the back-ups take a long time over airport, but fine via Ethernet.
Good luck everyone who struggles with this.
David

TM not showing the drive connected to Airport Extreme....

Hi
I've been backing up to a USB drive connected to Airport Extreme since I installed Leopard with no problem.. Since 10.5.6 it stopped working. I ended up erasing the drive, reformatting it, reseting the Airport Extreme, repair permissions, used Onyx and Applejack and still this is what I'm getting:
When I go select the drive from the TM prefs. it doesn’t show. If I connect it to the laptop first. accept the TM offer to use it as its HD and connect it back to the Airport. I can mount the drive but when trying to start a manual back up. TM gives me the msg. “The back up volume is not in Mac OS Extended (journaled) format which is required”. I formated the drive one more time, just in case and same thing. Last I did a full back up with another drive having it connected directly to the USB port and it worked fine.
I am running all this from my main Admin profile with file vault enable. I have another Admin profile without the file vault enable as an emergency because of a past experience and don’t really use it. and I have the guest acc. enabled.
Does anyone have any ideas??
Thank you.

backups to directly attached drives work differently (and are stored differently) from network backups. they are not interchangeable. also, while in the past TM backups to air disks worked, they are not officially supported by apple so it's possible that 10.5.6 update broke that functionality. You can try the following terminal command which helps to show unsupported volumes.
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
see if the airdisk shows up as a possible TM disk after that.

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

Can't see USB hd connected to airport extreme w/ iPad

Plugged external hd in airport extreme but can not see using IPad .I have downloaded app for airport & can find airport but does not show hard drive. How can I access files on external hard drive?

Unfortunately you can only access hard drives plugged in airport extreme or time capsule, from a Mac or a PC. iOS devices (iPad, iPhone, iPod touch) do not support this feature.

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

Can Time Machine back up a USB Drive connected to Airport Extreme?

If I connect 2 USB drives to an Airport Extreme via a USB hub, can I use Time Machine to back one up to the other? I've found multiple discussions about how to use an Airport Extreme disk as a Time Machine backup disk, but nothing on this. I want to use one disk as network storage (i.e. use the Airport extreme as a NAS), but I need a backup solution for that disk.

That's disappointing. I actually have a separate NAS already, configured for RAID1: a ZyXEL NSA220. Worked fine when I only had windows machines, but isn't reliable with my MACs, and doesn't support extended journaled format, so I need a different solution. I was hoping to just use a USB drive attached to my airport extreme to replace it, but I can't do that if I can't back up that USB drive.
Can anyone recommend a good backup solution? Surely this can't be that uncommon a scenario?

Time Machine fails with drive connected to Airport Extreme

First of all, I've had myriad problems with Time Machine, even when it was connected directly to my MBP. But after the recent updates, I installed them and hoped it would work wirelessly. I re-formatted my 120GB OWC drive (my MBP has 30GB available of 120GB). I have already been down the road of making sure I've formatted the drive correctly.
I excluded my system folder, my entourage identity, downloads, and my Parallels Windows XP file from the backup. I connected the drive to my Airport Extreme (not the gigabit version) and started the backup. Basically, it gets about 5 GB into the backup, moving very slowly, and then fails, saying that it couldn't locate the drive. And that part is true--I can't seem to locate the drive on my network anymore either. And eventually, after another hour or so, my Airport Extreme drops as well, and isn't even available. Even when I unplug the AE, and plug it back in, it still doesn't show up...but after about an hour or so...it pops back up and is available, working fine. My iPhone sees the same problem with AE dropping and then coming back. When the wireless service drops, I can plug an ethernet cable into the AE and I can access the internet fine, so it's not the cable modem (Time Warner).
Is anyone else seeing this problem? I'm no guru and appreciate that Macs just seem to work correctly. But Time Machine is making me pull my hair out. It's been an unmitigated disaster from start to finish.
Appreciate any help!

This is probably the most sensible post I've read on the issue. I've spent the last 2 days trying to get my 500GB LaCie Quadra hard drive to work with my Airport Extreme (the square one, yes .
I've formatted it correctly with the Disk Utility (multiple times!).
Airport Utility sees it just fine. I can back up to it when it is connected directly to my MacBook via USB.
But when the drive is connected via USB to the Airport Extreme, Time Machine doesn't see it -- unless I turn on file sharing with guest access read and write. That seems less-than-secure to me even if my network is protected.
Without guest access the drive appears in the shared section of the Finder, but I can't connect to it. I've tried all three combinations under "Secure Shared Disks" but none of them work.
Seems like its just too flaky to use an external disk connected to the Airport Extreme.
Happy to be pointed in the right direction... are there specific file permissions I should be setting my external drive to?
Thanks,
Rich

Don't see files on USB Drive connected to Airport Extreme

I just connected an external drive to my Airport Extreme via USB. It appears as a shared device in the finder sidebar. When I select it, none of the files that reside on the drive appear. It is a 1TB drive with 600GB of files on it, but none of the files show up, only a folder with the drive name. I open the folder and it is empty. The folder window shows 300 GB available. How do I make the existing files visible?

Thanks for the info.
Were you using the drive for Time Machine backups, by chance? Time Machine backups are stored in a different format when the disk is connected directly to a computer. So, you won't be able to continue to use the old backups when the drive location is changed.
You might want to check the drive by connecting directly to your Mac and running Disk Utility to "Verify Disk" and "Repair Disk" if indicated.
Even if the drive has it's own power supply, a powered USB hub is usually needed on the AirPort Extreme because the power at the USB port is quite limited.
Message was edited by: Bob Timmons

Using Spotlight to search USB drive connected to Airport Extreme base stati

Hi all,
I successfully connected a USB hard drive to my Airport Extreme base station (the drive has its own power supply; when I tried connecting a USB-powered drive, it wouldn't show up). However, I find that I cannot search the USB hard drive over the Airport network. That is not very convenient, to say the least. Is this possible without paying $500 for Snow Leopard server software or waiting for Lion (with a rumored built-in server function) to arrive?
Thank you!

My last response was incorrect. The base station is in the finder window, under "Shared." I click on that and then I see the USB driver. Also, I went to finder prefs and clicked to show servers on the desktop. So now the USB drive connected to the base station shows up on my desktop. But I still can't search it.
Thanks again.

I can't see hard drive attached to Airport extreme from Windows XP computer

I have a Windows XP computer on my network. I can no longer see the network hard drive attached to Airport Extreme from the XP computer. I can see it with all the MACs on my network and all the Windows 7 computers. I can connect to the internet with the Windows XP computer. I previously had no problem seeing the network hard drive attached to the airport extreme from the XP computer and one day it just disappeared. I have deleted and reinstalled Bonjour, not just Bonjour print services. I can print to a network printer that is not attached to the Airport Extreme. Help!

Well, I'm stumped. I spent an hour on the phone with Apple support-- they ran through the scenarios I had already been through, and they came up with nothing useful. I ended up taking a second 160gb HD that was formatted NTFS, and formatted if for HFS+. This drive was visible through Finder. I took the same drive, formatted it for FAT32 and, surprise, surprise, NOTHING VISIBLE.
The "just works" philosophy is OK, but it's bunk when it comes to network drive support. I'm doubting the wisdom of this purchase now.
$2500 for a computer that can't connect to a network drive that can be seen by an $500 Dell laptop?
The issue simply seems to be this: put a FAT32 drive on another box, and it can be shared by Macs and Windows boxes.
Put that same FAT32 box on an AirPort Express, and my Mac is BLIND. It can't see the drive.

Can't find disk drive connected to airport extreme

Similar Messages

Maybe you are looking for