Can't find 'displace' filter in Motion 5?

Searched for displace filter in Motion 5 but doesn't come up. Still working and visible in older projects though?
Why has Apple got rid of the displace filter? It's one of my favourites!

No Problem - Broken might have been a bit harsh. I had a ramp behaviour attached to the Displace filter and the values in the ramp behaviour were reset to zero when I opened the project in motion 5.
Oddly, I *do* have a displace filter. Check it out:

Similar Messages

Can't find 'displace' text in Motion 5?

Can't change settings text: font, size...

Not sure what you mean by displays, but if you click on any text item then go to the inspector, and the text sub-inspector you will see a whole bunch of ways to customize your text.

Where can i find a filter for...?

I need to do:
http://www.n-projects.com/simulation/coke.html
but just i arrive to here:
http://www.n-projects.com/simulation/movistar/simulacion/Paginas/simulacion_2.ht ml
What filter can i use for make this rotation video?
Thanks in advance.

Jim, without mapping the video to a 3d cylindrical object and then rotating that object in 3d space providing a camera viewpoint of the image as it scrolls by, then you have to simulate the rotation by creating the scrolling effect. one example of how to do that is to take your video clip and blow it up by 300% or more. then at the start of the clip use the wireframe and image mode to reframe so that the left edge of the clip lines up with the left edge of the frame. add a center keyframe. then go to the end of the clip and reframe so that the right edge of the clip lines up with the right edge of the frame. now the clip when played will appear to slide from right to left in the canvas. now add the Distort > Cylinder filter and it will appear to rotate. now scale the whole thing down and map it to your video kiosk ... obviously this is of limited use. the perspective wont be great unless you're looking dead on. but what I'm trying to offer you are ideas of how to build something like this with limited resources. you may prefer to wait for a more helpful response tho. have a look at the links goolilgoloiogoogi posted, you may find what you need there ... or jump into Motion 3 if you have it.

Where can I find my filter menus

Hi, guys.
I want to apply 'lens flare effect' to my photo.
I've known that 'lens flare' is in 'Filter' > 'Render' > 'Lens Flare'
But It's not in there. There was just 'Lighting Effects'.
How could I find 'Lens Flare' and many other menus that I lost
Normal Filter menus are like this, you know.
Thank you.

Reinstall the program with sufficient user privileges. Something went wrong.
Mylenium

Iptables can't find table 'filter'

I'm trying to use a pogoplug pro running archlinux as a ppptp server. I was following this tutorial
https://wiki.archlinux.org/index.php/PPTP_Server
and everything worked fine until i got to the part about configuring iptables.
Whenever I try any command against iptables i get the following error:
FATAL: Module ip_tables not found.
iptables v1.4.12.1: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
I did some reading and it appears that the kernel I am using does not have the module iptables needs to operate.
Can anyone please help?

So i decided to start from scratch and I got the latest tar ball of linux for the pogo plug pro from here:
http://archlinuxarm.org/os/ArchLinuxARM … est.tar.gz
and noticed that some things are different than when i used the script to install it. It appears there are modules for two kernels; is there a way I can switch to the 2.6.38 kernel so i can use all its modules?
uname -r:
2.6.31.6_SMP_820
/lib/modules/*/kernel/net/*/netfilter/:
/lib/modules/2.6.38/kernel/net/bridge/netfilter/:
ebt_802_3.ko.gz ebt_arp.ko.gz    ebt_log.ko.gz ebt_snat.ko.gz
ebtable_broute.ko.gz ebt_arpreply.ko.gz ebt_mark.ko.gz ebt_stp.ko.gz
ebtable_filter.ko.gz ebt_dnat.ko.gz    ebt_mark_m.ko.gz ebt_ulog.ko.gz
ebtable_nat.ko.gz ebt_ip6.ko.gz    ebt_nflog.ko.gz ebt_vlan.ko.gz
ebtables.ko.gz    ebt_ip.ko.gz    ebt_pkttype.ko.gz
ebt_among.ko.gz ebt_limit.ko.gz    ebt_redirect.ko.gz
/lib/modules/2.6.38/kernel/net/ipv4/netfilter/:
arptable_filter.ko.gz ipt_ECN.ko.gz nf_nat_h323.ko.gz
arp_tables.ko.gz ipt_LOG.ko.gz nf_nat_irc.ko.gz
arpt_mangle.ko.gz ipt_MASQUERADE.ko.gz nf_nat.ko.gz
iptable_filter.ko.gz ipt_NETMAP.ko.gz nf_nat_pptp.ko.gz
iptable_mangle.ko.gz ipt_REDIRECT.ko.gz nf_nat_proto_dccp.ko.gz
iptable_nat.ko.gz ipt_REJECT.ko.gz nf_nat_proto_gre.ko.gz
iptable_raw.ko.gz ipt_ULOG.ko.gz nf_nat_proto_sctp.ko.gz
ip_tables.ko.gz nf_conntrack_ipv4.ko.gz nf_nat_proto_udplite.ko.gz
ipt_addrtype.ko.gz nf_defrag_ipv4.ko.gz nf_nat_sip.ko.gz
ipt_ah.ko.gz    nf_nat_amanda.ko.gz nf_nat_snmp_basic.ko.gz
ipt_ecn.ko.gz    nf_nat_ftp.ko.gz nf_nat_tftp.ko.gz
/lib/modules/2.6.38/kernel/net/ipv6/netfilter/:
ip6table_filter.ko.gz ip6t_eui64.ko.gz ip6t_mh.ko.gz
ip6table_mangle.ko.gz ip6t_frag.ko.gz    ip6t_REJECT.ko.gz
ip6table_raw.ko.gz ip6t_hbh.ko.gz    ip6t_rt.ko.gz
ip6_tables.ko.gz ip6t_ipv6header.ko.gz nf_conntrack_ipv6.ko.gz
ip6t_ah.ko.gz    ip6t_LOG.ko.gz    nf_defrag_ipv6.ko.gz

Where can I find more templates for Motion?

Templates of all sorts but primarily graphic intro and credit templates, but also DVD and interesting transition templates, but that's less important. Preferably free, of course... Much thanks!

All the Motion templates I know of, including my own, are linked to from here:
http://www.applemotion.net/page21/page21.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link"

Trouble w/Displacement Filter

I am trying to use a “displace filter" In Motion . I would like to use a 5 sec .mov that I have exported from Motion. When I drop it into the "image well" I can see the displacement but there is no movement. Its stuck on one frame of the imported .mov (But the play head does play).
If I drop an Apple movie from the Motion content the displacement filter works fine. I have tried exporting as an animation, Motion jpeg and a few others. I must be exporting in the wrong format?
Any suggestions appreciated?
Im using Motion 1.0
EDIT: Or should I say trying to use Motion 1.0?

Mark,
when I add media to the "Layer Tab" for use in image well's can it be in any layer or does it need to be in the same layer as the image well.
Also, I do see my media in the Media Tab of the inspector. Does the simple fact that it’s there mean it is “set to play”? Or should I be looking for some other indicator in this tab?
Is there anything else about workflow in Motion that might be helpful to me? (I will consult the manual too).
Thanks!

Can't find FILTER CONDITION for filters or Function_Name for Functions

In the Data Warehouse 11gr1 views all_iv_xform...
I can't seem to find the Filter Conditions for filters and function name for functions that are called.
I have looked at the other views in the documentation for the API's but can't seem to find this information.
Any body have any ideas where this information is?
thanks
greG

select map_component_id, position, source_parameter_name
from ALL_IV_XFORM_MAP_PARAMETERS
where map_component_id in (
SELECT map_component_id
FROM ALL_IV_XFORM_MAP_COMPONENTS
WHERE MAP_ID IN (
select MAP_ID
from ALL_IV_XFORM_MAPS
where MAP_NAME = :p_map_name
AND OPERATOR_TYPE = 'Filter'
Using map_component_id and position from above query you can see your filter condition defined in property_value:
select map_component_name, property_name, property_value
from ALL_IV_XFORM_MAP_PROPERTIES
where map_component_id = :p_comp_id;

I can isolate a bookmark with the filter, but how can I "find" a bookmark in the hierarchy of the ShowAllBookmarks window?

I want to find a bookmark in its location in the hierarchy of bookmarks, but all I can do with the filter is isolate a bookmark[s]; either using the filter of the bookmarks sidebar, or in the ShowAllBookmarks window. For instance, I know I have a certain bookmark, but I want to move it into a new "folder" and rename it, perhaps; for this I need to be able to *see* it in the hierarchy, as in the Finder of a Mac, when the filter turns up a file, then "Show Original" of "Open Enclosing Folder."

I'm just trying to understand how to use these add-ons, having just added them on, to borrow a phrase, but have now found a comment re Go Parent Folder, "This extension does not seem to work in MacOS X. " <http://forums.mozillazine.org/viewtopic.php?t=659690>. Sadly [altho I really like Snow Leopard] I'm running OS X.6.7. Nonetheless a contextual menu mousing down on a "found" bookmark indeed does give the working option of "Go to Parent Folder" from the found list of the ShowAllBookmarks window, *or* the that of the sidebar window. Bravo!!
Just a question again, how would I have learned this had I not bothered the entire forum, and taken cor-el's time/effort?

Junk mail filter in yosemite doesn't work. i can't find the 'mark as junk' selection or 'remove from previous recipients' which would help to filter out spam.

junk mail filter in yosemite doesn't work. from the flags, i can't find the 'mark as junk' selection. Formerly clicking on the email address in question would allow one to 'remove from previous recipients' which would help to filter out spam. I've adjusted all the settings under mail preferences, but that is not helping.

Hello Diane162,
Welcome to the Apple Support Communities!
I understand that you would like to be able to filter some of the junk mail that you are receiving in Mail. The attached article has a lot of great information on junk mail filtering, including how to mark as junk and adjust the junk filter.
Mail (Yosemite): Reduce junk mail in your inbox
Cheers,
Joe

How can I find Nikon D800 in PS CS5 lens correction filter?

How can I find Nikon D800 in PS CS5 lens correction filter? I have version 12.0.4 and Camera Raw 6.7.0.339.

I see your question and wondered about it.
This is assuming that you know that in addition to the 18-55 issued with D3000's that there are other lenses in which to invest and with which to exploire.....
Using a D800 and CC PS 14.2.1 x64 and latest Camera Raw 8.4.1.200 I opened the lens correction filters.
There are lens correction tools in Raw for which no body selection is offered, just lens types. Which lens are you using?
In CC PS (Upgraded from PS5 or PS6 to CreativeCloud ("CC") PS with nice2 year discount offer from Adobe) there is a separate lens correction filter tool:
Options/settings
Manufacturer: NIKON
Model Options do not include D800 at this time
(Options D3, D300s, D3X, D4, & D700) Only the D300s is a crop frame CCD here as opposed to full frame 3, 4, 700, or our 800s. I would not set the model to any known crop frame (APS-C size CCD)
Searching adobe forums, it appears that camera body specific entries are only added for known problems.
Leaving the model set to Nikon (as opposed to all) allows for selection of specific lenses for a very broad gamut including grails like the OTUS.
I am guessing that there is no identified lens/camera-body specific peculiarity requiring a specific entry for the D800. This is something to watch over time and possibly to ask Adobe Directly.
I am now piqued to know.

Can't find M7 motion sensor on my i4S to start Health app

I can't find M7 motion sensor on my i4S for the Health app. I have iOS8 but can't get information to load automatically to the app.

The 4S does not have the M7 motion sensor. I believe it was introduced with the 5S.
~Lyssa

I can't find a appropriate sound Effect for motion template.

Hi,
Like my title say I can't find a appropriate sound Effect for motion template. I am using the template that goes by SATIN and There I choose SATIN BLUE-MENU.
In that Template we can see a blue Sheet flying by. BUt I am totally lost to get a nice sound for that. So far I could not find any sound for that. I never Worked with sound Effect. I appreciate any tip.
What is better only sound or a music playing with it? What kind sound goes with it?
Hope to hear from you all.
Thanks

I think you need to give us a little more information. Which program are you currently using? Soundtrack Pro, Motion, what? What does the Satin template do?
It sounds like what you're looking for is a "whoosh" effect -- like maybe a gust of wind or something like that. In finder search for the word "whoosh" and then select whichever drive has your Apple loops. You'll find a plethora of whooshes.
Of course that may not be what you're looking for. You'll have be be a little more specific with what the picture is that you're trying to add sounds to, and even then, it's still your artistic choice.

Can't find action menu in iCloud to add filter

Apple support says to acess the "action pop-up menu" in the sidebar to add filtering rules. There's no visible action pop-up menu here.
How can I add filtering rules? Where can I find the action menu?
Thanks.

It should be on the bottom-left corner in the Mail application on iCloud.com. If you don't see it, make sure your browser is full screen.

PB Displacement filter really slow with big images

hello;
     I am trying to make a Pixel bender displacement filter that will handle displacements bigger than 128 pixels, for flash. Right now flash only uses one 8 bit color channel to represent a displacement, which can not be bigger than 128 pixels. I am trying to make a pixel bender kernel that will take 3 color channels( 24 bit) as a displacement, which should be able to handle displacements as big as 8388608. That is obviously bigger than I need.
     The problem i am finding is that when the image or the displacement maps are too big it runs really slow. With images the size 3072x768, it runs at 3 frames per second on an intel based mac.
     The question is , does anybody know how to optimise this code?
the code:
<languageVersion : 1.0;>
kernel DisplacementMap
<
namespace : "dood";
vendor : "m0ose";
version : 1;
description : "Displacement by bitmap map 16 bit. X and Y are seperate bitmaps ";
>
parameter   float       scale
    <
        minValue        : -10.0;
        maxValue        : 10.0;
        defaultValue    : 1.0;
    >;
parameter float offsetX
    <
        minValue        : -1000.0;
        maxValue        : 1000.0;
        defaultValue    : 0.0;
    >;
parameter float offsetY
    <
            minValue        : -1000.0;
        maxValue        : 1000.0;
        defaultValue    : 0.0;
    >;
parameter float zoom
    <
            minValue        : 0.1;
        maxValue        : 10.0;
        defaultValue    : 1.0;
    >;
input image4 src;
input image4 mapX;
input image4 mapY;
output pixel4 dst;
void evaluatePixel()
    float2 pos = outCoord();
    float4 amountX = sampleLinear(mapX , pos);
    float4 amountY = sampleLinear(mapY , pos);
    float x = (amountX.b * 256.0 - 128.0) ; //red
    x = x + (amountX.g * 256.0 - 128.0) * 128.0;//alpha
    x = x * scale;
    x = x + pos.x;
    x = x + offsetX ;
    x = x / zoom;
    float y = (amountY.b * 256.0 - 128.0) ;
    y = y + (amountY.g * 256.0 - 128.0) * 128.0;
    y = y * scale;
    y = y + pos.y;
    y = y + offsetY ;
    y = y / zoom;
    float2 displacedPos = float2( x , y );
    dst = sampleLinear(src, displacedPos);
thanx

I am adding a shader to the filter attribute of a Flex Video Player
code: something like this
[Embed(source="displ24test.pbj" , mimeType="application/octet-stream")]
protected var displacer:Class;
var shader:Shader;
public function init():void
shader = new Shader( new displacer() );
shader.data.src.input = src;
shader.data.mapX.input = mapX;
shader.data.mapY.input = mapY;
shader.data.scale.value = [ scale ];
shader.data.offsetX.value = [ offsetX ];
shader.data.offsetY.value = [ offsetY ];
shader.data.zoom.value = [ zoom];
_mov.filters = [ new ShaderFilter( shader) ];
then in flex:
<s:VideoPlayer x="10" y="10" source="df_retro5_1k_sound.mov" id="_mov" autoPlay="true"/>

Can't find 'displace' filter in Motion 5?

Similar Messages

Maybe you are looking for