Can't find .dmg file Disk Utility shows is there

I've been trying to clean up/gain space on my G4-12" PowerBook. In Disk Utility it shows a .dmg file that when mounted is an audio CD I received from a friend a couple of years ago. I imported the songs from it at the time, ejected, and that was that. Now I see in Disk Utility that this dmg holds ±500mb of space, but I can't find it to delete it. This is quite strange and never happened before. Find, Spotlight, EasyFind (including looking for invisibles), etc. cannot locate it. In Disk utility it shows the path as /Volumes/<name>, implying it is mounted. Upon clicking 'Open' it mounts the <AudioCD> which then shows up in the left side of my Finder windows. I can open this volume, click on a song and it plays, so it is clear that it does exist and not just an artifact. I can eject the AudioCD and it disappears. But I can't get to the .dmg file to make it go away.
Any ideas on this are greatly appreciated as I've run out of paths to try....but I've not dipped into Terminal so would greatly prefer an alternative if it exists. Thanks in advance!

Have you done a Find/Search using just dmg, rather than a search for the file name?
To increase your HD's free space, look at these links.
Where did my disk space go?
http://www.macfixitforums.com/showflat.php?Cat=&Board=Forum38&Number=770243
Download & use WhatSize described in this link or Disk Inventory X @ http://www.derlien.com/
Freeing space on your Mac OS X startup disk
http://www.thexlab.com/faqs/freeingspace.html
Amazing Disappearing Drive Space
http://www.pinkmutant.com/articles/TigerMisc.html
Increase HD Free Space
http://macosx.com/forums/howto-faqs/275191-how-easily-increase-hd-free-space-lap top.html
How to free up my disk space
http://www.macmaps.com/diskfull.html
 Cheers, Tom

Similar Messages

Help...Can't find HD on Disk Utility

I was using my macbook this morning when it suddenly stopped working so I held the power button down and then when I tried turning it back on it wouldn't boot. It goes to a screen with a folder with a question mark on it. I can't access single user mode, but I can start up my leopard dvd and run disk utility. However, disk utility doesn't show any drives? it can find my HD. What should I do? My macbook is still under warranty and I bought it directly off the apple site. Do I need to contact apple directly or can I take my macbook to an apple store? Any way that I can fix this myself? thanks

You probably have a Seagate hard drive in there. Read this and pull the drive out to check the numbers on it.
http://www.macsimumnews.com/index.php/archive/macosgmacbook_seagate_hard_drives_catastrophicallyfailing
-Bmer
Mac Owners Support Group - Join us
  Mac611 Mobile Mac Support
   iTunes:MacOSG Podcast
                   An Apple User Group 
Have an iPhone or iPod touch? 'mobile Mac support.'
Disclaimer required by Apple Discussions Terms of Use: MacOSG - a non-profit Apple User Group - may receive some form of compensation, financial or otherwise, from my recommendation or link.

RAID failed - Can't find status in disk utility

I have an Xserve G5 with 3 hitachi 80GB SATA hard drives with a RAID 5 (I think) running 10.4.6. A couple of days ago, the server was running really slow and the afp was taking up alot of cpu time, so we rebooted the server as we haven't had a problem with afp before. However, the server would no longer boot up and the RAID alarm started going off. Now when booting the server I get the apple screen and after a couple of minutes, the server's fan would start going faster and faster until they would be going full blast. So I tried to check the status using disk utility of the RAID, but I can't see any status. I admit that I have only been working with the xserve for almost a year and I don't know alot, but all I see on the left of the disk utility is xserve megaraid and below that Server HD. I checked both of these and clicked on all of the tabs (first aid, RAID, partition, restore, etc), but I can't find a place to check the status of the RAID. All I can find about RAID is how to create another one. I finally found that I can run megaraid -showstatus and it said that the first hard drive failed and the other 2 were online. I also took out the hard drive and ran hitachi's test drive software using the advanced test and it said everything was fine. So I'm not sure if there is just something wrong with the RAID or what.
I did order another hard drive that is exactly the same and it should be here in a couple of days. I also know that this is the hard drive that was accidentally ejected while the server was running before, but when the hard drive was put back in, the RAID rebuilt it and has been running fine till now. I am pretty sure that I shut the server off before when the hard drive got ejected and it would boot, so I'm just not sure exactly what this all means as the Hitachi software tells me there is nothing wrong with the drive.
Help please

I checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
Anyway, I ran some commands and here are the results:
megaraid -showstatus
MEGARAID CLI version 1.0.12
No cmd argument
Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
megaraid -showdevices
Physical devices Available = 3
Drive ID Identification Size(MB) Status
0 Hitachi HDS722580VLSA80 78529 Failed
1 Hitachi HDS722580VLSA80 78529 Online
2 Hitachi HDS722580VLSA80 78529 Online
diskutil list
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *153.3GB disk0
1: Applepartitionmap 31.5KB disk0s1
2: AppleHFSServer HD 153.2GB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *2.6GB disk1
1: Applepartitionmap 31.5KB disk1s1
2: AppleDriveATAPI 4.0KB disk1s2
/dev/disk2
#: type name size identifier
0: untitled *467.0KB disk2
/dev/disk3
#: type name size identifier
0: untitled *95.0KB disk3
/dev/disk4
#: type name size identifier
0: untitled *95.0KB disk4
/dev/disk5
#: type name size identifier
0: untitled *95.0KB disk5
/dev/disk6
#: type name size identifier
0: untitled *219.0KB disk6
megaraid -showconfig
Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
0 5 64 156958 Degraded
megaraid -showapater
FW Version = A130
Bios Version = G117
Product Name = MegaRAID SATA 150-4D
Cache Size = 64MB
diskutil checkRAID
No RAID sets found
Thank you for your help. I really appreciate it and so do the teachers and the students!

My mac can't find the volume" Data" on Time Capsule. Also Ican't find with the disk utility program the hard disk in the Time Capule; so I can't format the disk again. What can I do?

My Mac can't find the volume " Data" on Time Capsule, Also I can't find with the disk-utility program the hard disk in the Time Capusule.
So I can't format the disk in the Time Capsule
Deconnevt and then connecting the power tp the Time Capsule gives also no solution.
What can I do?
Joe

I listed the commands.. that is how you manually mount the disk.. follow exactly the commands I gave you.
In finder use top menu, go, connect to server.
Type in the following.
AFP://TCname or AFP://TCIpaddress (obviously you replace with the actual name or the actual IP address).
If that fails..
try
SMB://TCname
Here is the screenshot.
tardis4 being the name of my TC.
It should then ask you for your credentials.
And it should remember them in the keychain and be able to then get TM to connect.

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2

Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet

Help! Can't open .dmg files suddenly, and can't find stuffit expander application!

My iMac is currently running on Mac os x 10.5.8, **out of nowhere my computer can't open dmg files. I can't seem to find the stuffit expander application anywhere in my hard drive either, which usually opens these files. Is there another application that can open dmg files? Help Please! I need to open multiple dmg files tonight and can't figure out a way around this. Downloading/running a new stuffit expander application also happens to be a .dmg file. If anyone can help me I'd appreciate it so much!

Do you mean DiskImageMounter was chosen or not?
No change on that .dmg or on on others?
If you want to apply DiskImageMounter to all you have to choose "Change All".
EDIT: Also, Repair Permissions from /Applications/Utilities/ Disk Utility.
Also, George Orville has some interesting advice in this thread
Note this advice is for 10.3 but much of it will apply here.
-mj
[email protected]
Message was edited by: macjack

Can't find admin files on former startup disk - now 2nd drive on MacPro

Help, My G5 tower died and I bought a MacPro tower. I put the drive from the G5 in the MacPro as a second drive and it runs fine but I can't find any files I created under the root user. I used Root for about six months while my system was dying a slow death due to some motherboard failure. I kept losing access to the user accounts but not root so I just worked in that. I know the root password and all but I have no idea how to even find the files. I can ironically now access all of the user files but everything done under "root/admin" is invisible.
Is there a way to simply access files like iWeb sites, etc on the old G5 drive? Is there a way to install OSX on the backup and re-access the G5 files?
Thanks!

Do you mean you are looking for the root user's home folder?
You can find that under /var/root on your old G5 disk. From Finder, select Go menu > Go to Folder..., and enter /Volumes/G5diskname/var/root.
You need root permission to get into that directory though, so if you want to use Finder you will have to be logged in as root. Or, a safer way, is to just remain logged in to your regular user account, right-click the G5 disk, Get Info, and select "Ignore ownership on this volume" under the ownershop & permissions section. Then you should have full access to everything on the drive without having to log in as root.

Message startup disk full (can't find the files)

Newb here so please bear with me on this.
I am using Handbrake to rip DVD's to put in iTunes. I transfer them to the external that iTunes is on fine, but I can't find the originals to delete them. The default save to location was a folder called "voulmes". I have since found that this is not the right location for the initial save to location, so it has been changed. My problem as stated is that I can't find the files to delete them. Even if I use spotlight and type in the original file name nothing comes up and I can't find a folder named "Volumes"
Any and all help is greatly appreciated, especially since I have roughly 66mb of free space left.
Thanks
Edit: I forgot to mention that Time Machine backs up on yet another external.
Message was edited by: liftman
Message was edited by: liftman

Launch the Terminal app in /Applications/Utilities/, paste this command into the window, and hit the return key:
*ls -Al /Volumes/*
that will give you a list of actual and virtual volumes. Anything that isn't one of your actual volumes is the culprit. To access it, type in this, and hit the return key:
*open /Volumes/"name of virtual volume"*
that will open the virtual volume and allow you to delete it's contents. Alternatively, you could run this:
*sudo rm -R /Volumes/"name of virtual volume"*
for this last one, you'll get a Password: prompt, carefully enter your admin password (nothing shows up on the screen), and hit the return key again.

My itunes are on windows 97. just got windows 7 laptop. when i load new software on my new laptop it shows all my windows 97 music/audiobooks but can not find the files. how do I link them

my itunes are on windows 97. just got windows 7 laptop. when i load new software on my new laptop it shows all my windows 97 music/audiobooks but can not find the files. how do I link them

iDevices are not and have never been backup devices.
Authorizing a computer does not cause media to magically appear.
Media is only where the user puts it.
Copy the ENTIRE iTunes folder from the old computer to the new computer.

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at http:// (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Is this a webpage that contains a link to a flv file? Please post a link to the page and tell us which link(s) are the problem flv files or else post a link to the .flv file itself.
Alternately, click on one of the sample FLV File links on this page and tell us exactly what happens:
http://www.mediacollege.com/adobe/flash/video/tutorial/example-flv.html
It might also help if you post the exact error message, including the path to the flv file.
'''Note:'''
Depending on how you have Firefox set up, clicking on a FLV File link will either save the FLV file to your computer or Firefox may open it automatically in an external application right after downloading (Firefox may ask you first). Firefox itself can't play FLV files so you need a "helper" application (or a plugin for flv files, if ther is one. You can see if Firefox is already set up to download or open FLV files by going to Firefox Preferences and looking in the Applications list. Find the FLV file type in the list and, if the action is "Open with", it should show the application that can play FLV files (e.g., VLC Media Player or Perian). See [[Managing filetypes]] for more information.

After a failed backup because my macbook went to sleep, my hard disk is full. What happened? Where can I find the file i need to erase?

because my macbook went to sleep, my hard disk is full. What happened? Where can I find the file i need to erase

It's hard to tell -- just going to sleep shouldn't have caused a problem. Something else may be going on.
See Where did my Disk Space go? especially the blue box.

Disk Utility Shows Incorrect Free Space

I've had this problem for a while now, and I've been unable to figure out why. I can't even remember when it started, but it has become quite a nuisance.
The Finder window shows that I have 302GB of harddrive space remaining, out of 500GB. The Activity Monitor and Disk Utility show I have 240GB space remaining, and my System Profiler shows I have 239GB remaining. I just deleted a bunch of old TV shows off of iTunes (about 40GB worth) to open up some space, but only the Finder changed (up to 302GB from 260GB) but the Activity Monitor, Disk Utility, and System Profiler haven't changed.
Now, I'll assume the Finder is showing the correct amount of space, but I'm wondering why the other utilites are showing the incorrent amount of space. I have a feeling maybe something was screwed up when I created a 50GB Windows 7 partition through Boot Camp a couple months ago.
I've attempted to Repair Disk through the Disk Utility and it says everything looks fine. Any solutions to this minor inconvenience? Or at least an answer as to why this is happening?

The available disk space reported in finder is totally wrong.
Even if it accounts for the local snapshots. In my macbook air it shows 120 Available in finder which is just 1GB less than my SSD capacity.
https://discussions.apple.com/thread/4467217

I can't open dmg files on my new MB Air. What can I do?

I can't open dmg files on my new MB Air. What can I do?

How are you trying to open it? What happens when you double-click it in the Finder? In the Finder Preferences do you have Show these items on the desktop: "CDs, DVDs, and iPods" selected?
What happens?

Can't find the hard disk

Hi Everyone, My iMac G5 20" (not iSight) is about 18 months old and I never had any problem with it until a week ago, when it started booting up with white blank screen. I tried to start it up by Tiger, but wouldn't have it, so I went to change the PRAM battery, but broke the clip, now put a new battery and fixed the problem somehow, BUT regardless how often and how hard I tried, the computer can not find the hard disk when it reaches the installation stage. Not by the system DVD or by it's disk utility. I tried the hard disk in my PowerMac, it works fine. I tried another hard disk, just the same. The three lights on the motherboard come on just fine. I have also tried it with the original DVDs (10.3.9) but just the same. Any ideas please? Many thanks

Hi,
Ref: iMac 20" (not iSight) model.
Well, I started it by holding down the option key, like usual it only show the flashing icon the the center of the white screen toggling the small square with question mark, looking for the hard drive.
I boot the iMac by system CD, it takes me through first 5/6 stages and finally does not find any hard drive to install. During this process, when I use the Apple Hardware, it does not find anything.
The hard drive works fine on other machines and other working machine hard drive will not be detected on the iMac.
All three logicboard light come on, showing it works fine, according to Apple manual.
The iMac was working fine, then after started to miss detecting the hard drive a few times during it last two weeks of being used, now it will not detect the hard drive.
Looking from logical point of view, it leads to one of the two cables connecting the hard drive to the logicboarde being faulty, but they have never been touched before as well as look fine.
Would it be caused by backup battery (PRAM)?
Thanks

Can't find Imovie file on external drive

Hi,
I finalized a project and exported it to an external hard disk. Used ' share' and 'export using quick-time' and saved it on a hard disk. However I can't find the file anywhere on the hard disk. What am I doing wrong??

Hi
And the external hard drive is formatted as ?
for video - it must be Mac OS Extended (hfs) (mine are journaled)
UNIX / DOS / FAT32 / Mac OS Exchange works for most other things BUT NOT for video whatever editing tool used. iMovie, FinalCut etc doesn't matter - it just doesnt work but cut's up video in 4GB bit's that don't connect back or play.
Select the ext. HD icon (one click) then go up to file and down to Show Info and read
• Formatted as : nnnnnnnnnnnn
• Frames per second
What does it read ?
Yours Bengt W

Can't find .dmg file Disk Utility shows is there

Similar Messages

Maybe you are looking for