CAN'T FIND DRIVER FOR AT-FBUS NI-FBUS FOR WINDOWS 2000

Trying to load software for AT-FBUS for Windows 2000. The only drivers that I can find are PCMCIA-FBUS and PCMCIA-FBUS/2. Are these the drivers for my at machine??

AT-FBUS can work under Windows 2000 in NI-FBUS 2.3.5 or later version. You don't need to install the driver, the AT-FBUS driver "nifb.sys" will be installed to your system driver directory automatically.
AT-FBUS doens't support PnP feature of Windows 2000, so you need to start the driver from "non-Plug & Play" list instead of importing the "INF" file as PCMCIA-FBUS does.
You can refer to the attached "FF HW and NI-FBUS SW for Win2000/XP" Installation Guide document for details.
Attachments:
323303A-01.pdf ‏171 KB

Similar Messages

  • Can't find driver for SB0

    Hello,
    I have an Audigy card (SB0230), and I can't find a driver for it. I tried few solutions, and here are what I done already:
    - I tried to install the newest driver from creative.com for Audigy board, but installer don't recognized my card and stopped.
    - I installed KX Audio driver. Everything went ok, installer recognized my card and I had sound, but I bought this card not only for music, but for games too, so lack of EAX led me to uninstall this driver.
    - I tried from the other side with the official driver. I unpacked it with WinRAR, installed it from Device Manager. It told me that this driver is not compatible with my device, but I ignored it and after restart I heard sound Unfortunetly, as for now I don't have any control over the card. Even Realtek has a control panel, so I figured out, that I must run installer to do something with my card, than just set volume :P Am I right? Where can I find driver for it's
    I have Windows Vista, but in XP everything was the same (and I used KX in XP).

    For Vista try this one,
    http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=2502

  • Can not find driver for Thinkpad T500

    I can not find driver for Thinkpad T500? Could you please help me?
    Moderator edit: Matched Subject to content.

    Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.
    Step 1: In NI OPC Server Create a new Channel. Channel Name can be whatever you want.
    Step 2: Device driver will be ControlLogix Ethernet.  You can also enable diagnostics if you want.
    Step 3: Network adapter. I used default setting.
    Step 4: Write only latest values.  Duty at 10. ( These are default settings and are recommended.)
    Step 5: Finish new Channel setup
    Step 6: Click on Icon to create new device
    Step 7: Device Name can be whatever you chose.
    Step 8: Select Device Model in this case CompactLogix 5300
    Step 9: Device ID For me was IP Address XXX.XXX.XXX.XXX,1,0    (Note the 1 directs path to backplane. The 0 to the slot where processor is)
    Step 9: Device timing.  Leave at defaults.
    Step 10: Auto demotion leave unchecked.
    Step 11: Leave at defaults Do not generate on startup Delete on create and allow subgroups
    Step 12: Port and watchdogs at default settings
    Step 13: Project options leave at default. (In my case I changed to short as that is what most of my tags were)
    Step 14: Create tagname from device.
    Step 14: Finish Device setup.
    You now have two options. 
    Option 1: Start creating tags as you need them. (This is what I did)
    Option 2: Right Click newly created device and select properities.  Then select database creation and click auto create.
    Go To Lookout  and create new driver. 
    Select OPC Client
    Server name will be from dropdown menu. National Instruments:NIOPCServers
    Click okay
    You should be done and smiling. 

  • 10.5.5 update hangs panic msg. can not find driver for 7,2,5 system dualG5

    Down loaded 10.5.5 and ran it, loaded software and rebooted on G5 Dual 2Ghz system.
    10.5.4 worked no problem.
    Got back panic saying can not find driver for platform 7,2,5
    Anybody know how to back this update back to 10.5.4?
    or fix this to get 10.5.5 working.
    Thanks

    I am experiencing something very similar. After downloading the update, it closes all app's and attempts to install. I've been looking at a stalled progress bar for 30 minutes.... No error messages yet, but my prospects don't look good. Any advice?

  • We feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.pls answer

    we feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.please answer or we have to use the old one because its very ugly to see a revolving status.

    I checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
    I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
    Anyway, I ran some commands and here are the results:
    megaraid -showstatus
    MEGARAID CLI version 1.0.12
    No cmd argument
    Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
    megaraid -showdevices
    Physical devices Available = 3
    Drive ID Identification Size(MB) Status
    0 Hitachi HDS722580VLSA80 78529 Failed
    1 Hitachi HDS722580VLSA80 78529 Online
    2 Hitachi HDS722580VLSA80 78529 Online
    diskutil list
    /dev/disk0
    #: type name size identifier
    0: Applepartitionscheme *153.3GB disk0
    1: Applepartitionmap 31.5KB disk0s1
    2: AppleHFSServer HD 153.2GB disk0s3
    /dev/disk1
    #: type name size identifier
    0: Applepartitionscheme *2.6GB disk1
    1: Applepartitionmap 31.5KB disk1s1
    2: AppleDriveATAPI 4.0KB disk1s2
    /dev/disk2
    #: type name size identifier
    0: untitled *467.0KB disk2
    /dev/disk3
    #: type name size identifier
    0: untitled *95.0KB disk3
    /dev/disk4
    #: type name size identifier
    0: untitled *95.0KB disk4
    /dev/disk5
    #: type name size identifier
    0: untitled *95.0KB disk5
    /dev/disk6
    #: type name size identifier
    0: untitled *219.0KB disk6
    megaraid -showconfig
    Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
    0 5 64 156958 Degraded
    megaraid -showapater
    FW Version = A130
    Bios Version = G117
    Product Name = MegaRAID SATA 150-4D
    Cache Size = 64MB
    diskutil checkRAID
    No RAID sets found
    Thank you for your help. I really appreciate it and so do the teachers and the students!

  • I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update

    Dears at Apple:
    I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update on any of my devices(iPhone 4s, iPhone Touch (4th Gen), iPad (3rd Gen). Most of the "Podcasts" I listen to are music content based and wanted to apply sound enhancements(EQ) like before when integrated with ipod function. Can you consider to "fix" this issue?
    Many Thanks!

    OK Emanuel I found a solution! I dowloaded and installed "Denon Audio" app from the iTunes store & it works great! It has an EQ you can set curves on manually or use the (few) built in pre-sets. It is a player like the Music app that comes with the iPhone, etc. but restores the EQ functionality so we can adjust the audio of PODCASTS:-) Until Apple fixes this what I consider a bug I will be using the Denon app as my default music player!

  • Can't find my iweb domain file when searching for it in iweb seo tool

    I am trying to get my iweb website recognized by Google. Can't seem to get the google html code to work in html snippet. So am now trying to use the iweb seo tool but can't find my iweb domain file when searching for it in iweb seo tool. My file is in user/library/applicationsupport/iweb/name.sites2
    It shows in the folder but is not active, so I can't choose it.

    The SEO ftp client is not what I'd recommend using. Once you add the metadata to a local copy of the files use a 3rd party ftp client like the free Cyberduck to upload the files. Much more reliable.
    Google does not use keywords for it's searches although other search engines do. Create a test page on your site (leave it out of the navbar) and try adding Google Analytics to it with Wyodor's instructions. If you get it to work then all you need to do is copy and paste the HTML snippet from the test page into your site pages.
    For information on visitors to your site you can also use StatCounter. It records the number of visitors and a lot more: where they are from, what browser used, which page visited and what site/page then came from for just a few. SC is easy to add to the pages as you get the code for your account, put it in an HTML snippet add the snippet to each page. Old Toad's Tutorial #13 - Adding a StatCounter as an HTML Snippet describes how to do it.
    Again use a test page or a separate test site to work out the details before adding to your site pages.

  • With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

    With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

  • How can I find out whether I will be charged for texting somebody who lives in Canada and I live in the US?

    How can I find out whether I will be charged for texting somebody who lives in Canada and I live in the US?

    If you are on a More Everything plan, International texting is included at no additional charge.
    If you are on any other plan, there will be a charge.
    From Verizon FAQ
    If you have The MORE Everything Plan, unlimited international text and multimedia messaging is included for no additional cost.
    For all other plans, you can find pricing, dialing and coverage information for a specific country on our International Messagingpage.

  • Where can I find a full list of FRM Errors for forms 9i?

    Where can I find a full list of FRM Errors for Forms 9i?
    I have installed Forms 9i + the documentation CD but it has very little documentation on forms, just lots of J2EE stuff.

    Look in the Forms - Builder help. There you find a lot about Forms - Error.

  • Where can I find a complete set of compiled swfs for 2.0?

    Where can I find a complete set of compiled swfs for 2.0?
    I want to place these directly on my website.
    Thanks,
    Ken

    So basically Apple is hiding which networks allow rentals vs. purchase until you buy an ATV2,
    and then find out you can't watch "The Closer", "Men of a Certain Age", "In Plain Sight", etc., etc.
    Or until you spend a bunch of time digging through iTunes show by show...
    Sad...Guess I'm sticking with Cable for a while longer....

  • WHERE CAN I FIND A RELIABLE 2x2GB SO DDR3 SDRAM FOR MY MACKBOOK?

    WHERE CAN I FIND A RELIABLE 2x2GB SO DDR3 SDRAM FOR MY MACKBOOK?

    Be sure when you buy RAM not to buy by spec.  Get RAM that specifically says MacBook mid-2010.  Not all 2x2GB SO DDR3 are the same.
    All of shldr2thewheel's sites offer you the option to buy by model and then age of model.

  • HT1657 I rented a movie and now can't find it. I was also charged for the movie? where is it?

    I rented a movie and now can't find it. I was also charged for the movie? where is it?

    What did you download it on ? If a computer's iTunes then do you have a 'rentals' tab in the Movies part of your library ? If on an iOS device then it should be in the Videos app (if it's not showing there then have you got a film age rating set in Restrictions that is hiding it ?).

  • Where can i find a list of compatible ssd's for Apple Mac Pro 3.33GHz Six Core Mid 2012 Desktop/PC.

    where can i find a list of compatible ssd's for Apple Mac Pro 3.33GHz Six Core Mid 2012 Desktop/PC?

    http://www.storagereview.com/best_drives
    http://www.storagereview.com/buying_an_ssd_the_top_10_brands_that_matter
    Prices have crashed. Look and you can find Samsung 128's and others for $89 sometimes.
    It is not just moving the OS and data apart, though it does matter, and more from you should never have the OS cluttered with data, been doing that for... 35 yrs. 0.01 ns vs 10 ms. 60k IO's per second. Reads in 220MB/sec but held back from making full use of SATA 6G.
    OWC Mercury Aura Pro Express 6G SSD, the first and only third party SSD compatible with the new 2012 MacBook Air.
    http://thessdreview.com/category/our-reviews/

  • Where can I find the GPS coordinates in iPhoto 11 for geotagged pics? In iPhoto 09 this information was available under the Photos menu "Show Extended Photo Information".

    Where can I find the GPS coordinates in iPhoto 11 for geotagged pics? In iPhoto 09 this information was available under the Photos menu "Show Extended Photo Information".

    I think you can only see the map.  To see the actual EXIF data you would need to export and use a viewer.

  • Where can I find the update "Adobe Extension Manager CS5" for Windows? HELP!!!

    Where can I find the update "Adobe Extension Manager CS5" for Windows? HELP!!!

    Hi Piotrmp006,
    You can download the Extension Manager CS5 for Windows from the below mentioned link.
    Download the Extension Manager
    Download Extension Manager CS5 installer and save it on your machine.
    Double-click the installer to begin the installation process.
    Adobe - Exchange : Download the Adobe Extension Manager
    Let me know if you need more help.
    Thanks!
    Eshant

Maybe you are looking for

  • Repair or replace?  If replace, HD now or not yet?

    I have been happily doing semi-pro-level video for a variety of applications (nature scenes for a series of commercial "sorta music video" DVDs, documentary-like stuff, weddings, and anything else that comes my way) for seven years with my primary an

  • Allowing user to click check boxes in any order

    Hi, I'm using Captivate 5.5 to create a training session with our software. On a particular page, our trainer wants me to instruct the user to click every check box on a page. Since there are 10 check boxes, I would like to let the user click all the

  • Lumia amber update

    I am in India and i haven't received the amber update till yet. Why??

  • URL iView

    Hi We have a req like this. We have a URL iView which points to some site like SDN. We have done the user mapping so that it wont ask for login. But the req is... inside the so created page, there are many links. The user wants to add those links to

  • InternalEOAService BusinessSystemAccessor failed

    Hi, We have PI7.1 installed on AIX/Oracle 10g.  When trying to go through the Integration Builder to assign a Business System, we see the below error. Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor