Can't find fan???
Hey, sorry for double posting (sort of) since this is also heat related (as is my 'How hot is hot' thread)
but I can't seem to find my fans on my MBP. That is to say I NEVER have heard them turn on, not once, even when the CPU was running at 80C. And I have an iStats Pro widget that doesn't recognize that I have any fans either.
Is there anyway to confirm I do infact have working fans on my machine?
Thanks for any help guys.
update: okay so I figured out that whatever the /dev/null command does, it makes both CPU cores go full throttle (2.17Ghz) and they heat up pretty quick.
My fans turned on at about 80+ degrees C, but they werent really doing anything. That is to say, it was getting hotter, and not cooling down at all. Which is really odd....Im worried to now to do anything to CPU heavy in hopes of overloading the machine....am I just being really paraniod? I hope so...
Similar Messages
-
Can't find fan header - G62 b29SA
My friend owns an HP G62 laptop. He said that the fan stopped working and I couldn't hear or feel it so I got a new fan and we opened the laptop up. It turned out that the fan I'd bought was not compatible. Later, I tested the fan using a 3 V supply and it worked just fine. I went to plug the fan in and I can't find the header! Could it have been knocked off the motherboard? I don't see it and I don't know how to proceed.
This question was solved.
View Solution.Please provide the correct model number or product number of your notebook:
HP Notebook PCs - How Do I Find My Model Number or Product Number?
You must have the product number or model number to get technical help or find updated drivers & software. There are several ways to locate the product number and serial number on your PC
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!*** -
Elitebook 8570w hot to the touch, can't find fan sensor data
Hi, I am having issues with a HP Elitebook 8570w and its functioning. When using a lot of the cpu the heat builds up to the point that it can get slightly painful to the touch on the left side. This includes the left most keys of the keyboard. The fan itself is nearly silent and there is barely any airflow through the exhaust. But can be heard to be moving. The laptop itself is inclinded and the fan doesn't look blocked when inspected through the service latch. The only physical block I can imagine is with the side exhaust but I can't examine that without taking apart the entire thing. So I am trying to diagnose the situation. However I have not been able to find any way of monitoring the fan speeds and utilisation. (SpeedFan and its ilk appear to be unable to find a fan) Do I need to go into the bios for this? As I'd rather not send it in just for a software issue. But with temperatures around 90-120 degrees celcius I'd really like to do something about this.
MY suggestion would be to send the unit for service if it is under warranty and get it fixed. If the unit is not under warranty then please check the vents and clean it since i belive it should be blocked . I am a HP Employee. The comments made reflects only my idea/knowledge and not HP. Please click on Kudos Icon on left hand side if i have answered your question.
-
Elitebook 8570w hot to the touch, can't find fan data
Hi, I am having issues with a HP Elitebook 8570w and its functioning. When using a lot of the cpu the heat builds up to the point that it can get slightly painful to the touch on the left side. This includes the left most keys of the keyboard. The fan itself is nearly silent and there is barely any airflow through the exhaust. The laptop itself is inclinded and the fan doesn't look blocked when inspected through the service latch.
So I am trying to diagnose the situation. However I have not been able to find any way of monitoring the fan speeds and utilisation. (SpeedFan and its ilk appear to be unable to find a fan) Do I need to go into the bios for this? As I'd rather not send it in just for a software issue. But with temperatures around 90-120 degrees celcius I'd really like to do something about this.Hello Riverlim,
Welcome to the HP Forums.
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
I Can't Find My Product "Hp Pavilion Dv6-6c50se" on PartSurfer, I Need My Fan Part Number
Hi, as i said in the Subject i can't find my product..
Pavilion Dv6-6c50se
my S/N: [Edited for Personal Information]
my P/N: A7P18EA#ABV
now what? i really need to change my Fan and i can't get the Part Number of it..
Please Help.
This question was solved.
View Solution.You're welcome
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
HI all
Pardon me for the stupid title - -been some time since on the forum
This is much better.
So the situation on son's Mac Book Pro.
It seems a few days ago the computer would not take a CD - -not huge deal
Then suddenly he had trouble.
Turned on computer and get the folder with the ? I am pretty certain this means it
can't find the start-up items.
I guess he tried to do some "diagnostics on the internet - it was a Hardware diag.
and said everything was OK but couldn't find a HD
So he bought a new HD and we just installed it. Start tje computer and the same question in folder.
He bought the HD from apple so not an aftermarket.
I guess he is not sure where is start-up disks our (kids) but what can we do now?
He is at our house now and can't seem to connect to the internet becuase he can't see my network
which is wireless.
Is there something we can try - -should we re-install the old HD - -the new one may not be formatted
not sure all we know is it was from Apple direct.
He just told me the OLD hard drive could be read by a device at school. So it seems perhpas the HD MAY? be
OK but there is some sort of communication thing going on.
In the old dayson my G-3 slot - -we would start up with a network
Not sure how do do any of that on this book
PLease help - - very important (he is a grad student and needs the computer that is why he paid for
on day shipping
What do we do? Any tips tricks?\ please offer any ideas - -dad is stuck - -Thanks
JimHello Grant - -Thanks - -
I notice you are west of Boston - -we in Medford and son goes to Tufts in town
(small world)
Not really certain what you are telling us - - I am not good at computers
A couple of other things that may be tips - -
1 - on wednesday of this week
our son noticed the fan was going on almost continuosly,
After that trouble started - -
2. - When we put the new HD in - -same things happened,
which is ? mark in folder (start-up items)
3. - His computer will not see my wireless even if I put it next to my I-mac
It sees several networks but not mine - -and if we type in my netwokr
info - -it will not take. He wanted to try a network start-up .
I forget how that is done.
4, - The bottom of the computer is getting hot - -much hotter than i think it should.
any ideas why his computer won't see my router?
I think he may just have to take it to Apple Store on Newbury Street.
Would they be able to get his info off the old HD assuming it is still good and
transfer to the new HD fairly easy.
LAstly - - I am pretty certain I have the str-up disks for my I-mac which is running
10.5.8.
Would I be able to do anything with my computer and hook into his computer
into mine like an external device or something like that
I really appreciate your thoughts and efforts on this and must admit I have no
external enclosrure? but I have an external HD on my I-mac
As you can tell - -I am not to good at this
Thanks from Meffa (lol0 Jim the father -
I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5 -
RAID failed - Can't find status in disk utility
I have an Xserve G5 with 3 hitachi 80GB SATA hard drives with a RAID 5 (I think) running 10.4.6. A couple of days ago, the server was running really slow and the afp was taking up alot of cpu time, so we rebooted the server as we haven't had a problem with afp before. However, the server would no longer boot up and the RAID alarm started going off. Now when booting the server I get the apple screen and after a couple of minutes, the server's fan would start going faster and faster until they would be going full blast. So I tried to check the status using disk utility of the RAID, but I can't see any status. I admit that I have only been working with the xserve for almost a year and I don't know alot, but all I see on the left of the disk utility is xserve megaraid and below that Server HD. I checked both of these and clicked on all of the tabs (first aid, RAID, partition, restore, etc), but I can't find a place to check the status of the RAID. All I can find about RAID is how to create another one. I finally found that I can run megaraid -showstatus and it said that the first hard drive failed and the other 2 were online. I also took out the hard drive and ran hitachi's test drive software using the advanced test and it said everything was fine. So I'm not sure if there is just something wrong with the RAID or what.
I did order another hard drive that is exactly the same and it should be here in a couple of days. I also know that this is the hard drive that was accidentally ejected while the server was running before, but when the hard drive was put back in, the RAID rebuilt it and has been running fine till now. I am pretty sure that I shut the server off before when the hard drive got ejected and it would boot, so I'm just not sure exactly what this all means as the Hitachi software tells me there is nothing wrong with the drive.
Help pleaseI checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
Anyway, I ran some commands and here are the results:
megaraid -showstatus
MEGARAID CLI version 1.0.12
No cmd argument
Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
megaraid -showdevices
Physical devices Available = 3
Drive ID Identification Size(MB) Status
0 Hitachi HDS722580VLSA80 78529 Failed
1 Hitachi HDS722580VLSA80 78529 Online
2 Hitachi HDS722580VLSA80 78529 Online
diskutil list
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *153.3GB disk0
1: Applepartitionmap 31.5KB disk0s1
2: AppleHFSServer HD 153.2GB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *2.6GB disk1
1: Applepartitionmap 31.5KB disk1s1
2: AppleDriveATAPI 4.0KB disk1s2
/dev/disk2
#: type name size identifier
0: untitled *467.0KB disk2
/dev/disk3
#: type name size identifier
0: untitled *95.0KB disk3
/dev/disk4
#: type name size identifier
0: untitled *95.0KB disk4
/dev/disk5
#: type name size identifier
0: untitled *95.0KB disk5
/dev/disk6
#: type name size identifier
0: untitled *219.0KB disk6
megaraid -showconfig
Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
0 5 64 156958 Degraded
megaraid -showapater
FW Version = A130
Bios Version = G117
Product Name = MegaRAID SATA 150-4D
Cache Size = 64MB
diskutil checkRAID
No RAID sets found
Thank you for your help. I really appreciate it and so do the teachers and the students! -
[SOLVED]pwmconfig fails to find fan sensor on Intel D510MO motherboard
Hello there,
i can't find any info about this motherboard on wiki and google on this problem.
i've installed lm_sensors and got this running sensors:
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +19.0°C (crit = +100.0°C)
coretemp-isa-0002
Adapter: ISA adapter
Core 1: +15.0°C (crit = +100.0°C)
w83627thf-isa-0290
Adapter: ISA adapter
in0: +1.17 V (min = +0.00 V, max = +3.84 V)
in1: +1.01 V (min = +2.05 V, max = +0.00 V) ALARM
in2: +1.90 V (min = +0.00 V, max = +0.00 V) ALARM
in3: +3.02 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +3.41 V (min = +0.02 V, max = +0.00 V) ALARM
in7: +2.99 V (min = +0.27 V, max = +0.13 V) ALARM
in8: +3.23 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 1318 RPM, div = 32) ALARM
fan2: 0 RPM (min = -1 RPM, div = 32) ALARM
fan3: 0 RPM (min = -1 RPM, div = 2) ALARM
temp1: +48.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
temp2: +29.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
temp3: +29.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
beep_enable:enabled
i've tried run pwmconfig and got this:
Found the following devices:
hwmon0/device is coretemp
hwmon1/device is coretemp
hwmon2/device is w83627thf
Found the following PWM controls:
hwmon2/device/pwm1
hwmon2/device/pwm2
hwmon2/device/pwm3
Giving the fans some time to reach full speed...
Found the following fan sensors:
hwmon2/device/fan1_input current speed: 0 ... skipping!
hwmon2/device/fan2_input current speed: 0 ... skipping!
hwmon2/device/fan3_input current speed: 0 ... skipping!
There are no working fan sensors, all readings are 0.
Make sure you have a 3-wire fan connected.
You may also need to increase the fan divisors.
See doc/fan-divisors for more information.
anyway i managed to control my system fan to monitor temp1 (motherboard temp) running:
echo "180" > /sys/class/hwmon/hwmon2/device/pwm1
but i need to run it as root and pass "yes" to pwmconfig first to activate manual control
so i need a bash script to run this automatically on startup,i found this one and modified it but i need help to get pwmconfig run with "yes" before start my if...else control to launch "echo..." once temp1 reach 50 C°
this is original:
#!/bin/sh
### Temperature guard
### Auto Shutdown if Temperature is over threshold
THRESHOLD=57 # Max temperature
SENSORS=/usr/bin/sensors
PATH=/bin:/usr/bin:/sbin:/usr/sbin
test -x $SENSORS || exit 0
echo "Temperature Guard started. Threshold temperature is $THRESHOLD °C"
logger "Temperature Guard started. Threshold temperature is $THRESHOLD °C "
while [ 1 ]
do
## Get Temperature using lm-sensors
t1=`$SENSORS | nawk '/temp1/ {print substr($2,2,2)}'`
t2=`$SENSORS | nawk '/temp2/ {print substr($2,2,2)}'`
t3=`$SENSORS | nawk '/temp3/ {print substr($2,2,2)}'`
# log every 15 minutes
logger "Temperature Guard RUNNING. CASE: $t1°C CPU: $t2°C BOARD: $t3°C"
for i in `seq 1 180`;
do
## Get Temperature using lm-sensors
t1=`$SENSORS | nawk '/temp1/ {print substr($2,2,2)}'`
t2=`$SENSORS | nawk '/temp2/ {print substr($2,2,2)}'`
t3=`$SENSORS | nawk '/temp3/ {print substr($2,2,2)}'`
if [ $t1 -gt $THRESHOLD -o $t2 -gt $THRESHOLD -o $t3 -gt $THRESHOLD ]
then
echo -n "\rTemperature PANIC! CASE: $t1°C CPU: $t2°C BOARD: $t3°C Shutting down immediately!"
logger "Temperature Guard: PANIC!. CASE: $t1°C CPU: $t2°C BOARD: $t3°C Shutting down immediately!"
shutdown -h now # requires %user ALL=NOPASSWD: /sbin/shutdown in visudo
else
echo -n "\rTemperature Guard: OK. CASE: $t1°C CPU: $t2°C BOARD: $t3°C"
fi
sleep 5
done
done
any good person here to help me? :)
Last edited by alko (2010-09-28 19:05:33)solved
1)
install with pacman:
lm_sensors
yaourt
sudo
nawk
refer to the wiki of archlinux to install and configure this packages
2)
save this script and add it to startup and shutdown of kde settings (i assume you are using kde,and i suggest you to install it)
(example sudo path/to/yourscript.sh)
#!/bin/sh
### controllo ventolina
### controlla in automatico la velocita' della ventolina data la temperatura
SENSORS=/usr/bin/sensors
PATH=/bin:/usr/bin:/sbin:/usr/sbin
test -x $SENSORS || exit 0
sudo sh -c "echo 1 > /sys/class/hwmon/hwmon2/device/pwm1_enable"
while [ 1 ]
do
## prende la temperatura da lm-sensors
t1=`$SENSORS | nawk '/temp1/ {print substr($2,2,2)}'`
if [ $t1 -gt "49" ];
then
echo "180" > /sys/class/hwmon/hwmon2/device/pwm1
echo "temperatura $t1 gradi \n" ##comment this lines if you don't want to run in console
sleep 20
elif [ $t1 -gt "47" ];
then
echo "170" > /sys/class/hwmon/hwmon2/device/pwm1
sleep 20
echo "temperatura $t1 gradi \n"
elif [ $t1 -gt "45" ];
then
echo "157" > /sys/class/hwmon/hwmon2/device/pwm1
sleep 20
echo "temperatura $t1 gradi \n"
fi
done
Last edited by alko (2010-09-28 19:04:09) -
Where can I find a picture of s10-2 with 6-cell ?
Where can I find a picture of s10-2 with 6-cell ? The pictures shown somewhere in this forum shows a s10-2 with a 3-cell, but it isn't even sold with a 3-cell, so i'd like to see what it would look like in real-life with a 6-cell.
Also, is the fan/bios problem fixed in the s10-2 ?George Peters wrote:
Contrary to what this website says you will void the warranty if you take apart your iMac. Have you tried running Apple Hardware Test?
http://home.comcast.net/~woojo/DFFA53A0-F23D-4541-9015-481FD3B6532E/iMac_Disasse mbly.html
George
George,
Thanks, but I don't plan on taking it apart. I just want to have a better idea of
what I think may be the problem.
I just had it in for a 'tune up' where they do a hardware test, and also vacuum
out the dust. I was hoping that would fix it, but it didn't.
Thanks again,
Paul -
How can i use itunes to find track names on cds from an old roomate"s band. Its a professional cd that was sold in stores but it shows up as track 1 track two. the database could not find them.
I had another friend who made a cd and inputed all of the data but itunes still puts them as track 1 track two. How can i find the names without manually putting them in?How can i find the names without manually putting them in?
They will only show up in iTunes if someone (your friend, their producer, or a fan) has submitted them to Gracenote.
If that did not happen, you can try identifying the tracks with an auto-tagging program such as Picard. -
I can't find my iPhone backup in Mac OS X Lion.
After upgraded to Lion, I can't find my iPhone backups any more at ~/Library/Application Support/MobileSync/Backup, but they still show up in iTunes though. Does anyone know where the new location is? Or it's now hidden?
Thanks!from my understanding "other" are files/data that are not recognized by your Mac. Same with our iOS devices
Here's an example, Im a big anime fan so I have a folder with tons of animes having a format of .mkv
my mac does not recognize this that's why it falls under "others". Any file format that's not supported by your native Mac applications are considered others
If you want to know where these files are located, use "omnidisk sweeper" -
Can someone help me to find a temperature probe for the imac's Hard Disc? I'm tired of looking for but I can't find it.
What you are asking isn't clear. Are you saying that you are not getting any temp readout for the drive? What are you using to see the internal temps? If you aren't getting any output from the drive temp sensor, the drive fan should be revving up full speed. Is this happening?
Get Temperature Monitor and post the results
http://www.bresink.com/osx/TemperatureMonitor.html -
Wireless card can not find any network.
I have 2 wireless card:
TP-Link PCI card:TL-WN851N
D-Link USB card:DWA-127
both card work fine under windows.
but TP-Link can not find any wireless network,even if I moved my wirelss router to same room with TP-Link wireless card.
Anybody have an idea ?
I comfirmed the kernel driver is properly loaded:
[root@XSign ~]# lspci -k
04:00.0 Network controller: Qualcomm Atheros AR9227 Wireless Network Adapter (rev 01)
Subsystem: Qualcomm Atheros Device 0300
Kernel driver in use: ath9k
Kernel modules: ath9k
[root@XSign ~]# ifconfig -a
//this is D-Link card
wlp0s20u11: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.101 netmask 255.255.255.0 broadcast 255.255.255.255
inet6 fe80::bef6:85ff:fe67:57c prefixlen 64 scopeid 0x20<link>
ether bc:f6:85:67:05:7c txqueuelen 1000 (Ethernet)
RX packets 171436 bytes 230296030 (219.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 107153 bytes 12458452 (11.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
//this is TP-Link card
wlp4s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 08:57:00:34:4f:c5 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@XSign ~]# ifconfig wlp4s0 up
[root@XSign ~]# iwlist wlp4s0 scan
wlp4s0 No scan results
and I can find many wireless network with same command through card wlp0s20u11
AR9227 is supported : http://wireless.kernel.org/en/users/Drivers/ath9k/Thanks for reply.
one more thing, I noticed the power LED didn't "light up" when I execute the "power up" command.
[root@XSign hacksign]# ip link show wlp4s0
3: wlp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 08:57:00:34:4f:c5 brd ff:ff:ff:ff:ff:ff
[root@XSign hacksign]# ip link set wlp4s0 up
[root@XSign hacksign]# ip link show wlp4s0
3: wlp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 08:57:00:34:4f:c5 brd ff:ff:ff:ff:ff:ff
[root@XSign hacksign]# dmesg | grep firmware
[root@XSign hacksign]#
any suggesstions ?
below is my complete demsg output:
[root@XSign hacksign]# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08871484-d630-41f6-a743-4086ad9f8628 rw noisy init=/usr/lib/systemd/systemd nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb231fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb232000-0x00000000bb238fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb239000-0x00000000bc247fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bc248000-0x00000000bc74dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bc74e000-0x00000000ce799fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce79a000-0x00000000ce9adfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ce9ae000-0x00000000cea93fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cea94000-0x00000000cf7fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. G1.Sniper B5/G1.Sniper B5-CF, BIOS F6 01/17/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0220000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0228000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 022C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 6 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22de00000-0x22dffffff]
[ 0.000000] [mem 0x22de00000-0x22dffffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22ddfffff]
[ 0.000000] [mem 0x22c000000-0x22ddfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbb231fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbb1fffff] page 2M
[ 0.000000] [mem 0xbb200000-0xbb231fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb239000-0xbc247fff]
[ 0.000000] [mem 0xbb239000-0xbb3fffff] page 4k
[ 0.000000] [mem 0xbb400000-0xbc1fffff] page 2M
[ 0.000000] [mem 0xbc200000-0xbc247fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbc74e000-0xce799fff]
[ 0.000000] [mem 0xbc74e000-0xbc7fffff] page 4k
[ 0.000000] [mem 0xbc800000-0xce5fffff] page 2M
[ 0.000000] [mem 0xce600000-0xce799fff] page 4k
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x379c0000-0x37cd7fff]
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CEA6C078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CEA77460 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CEA6C188 00B2D7 (v02 ALASKA A M I 000000F6 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CEA92080 000040
[ 0.000000] ACPI: APIC 0x00000000CEA77570 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CEA775E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CEA77630 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CEA77B70 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CEA78648 00003C (v01 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CEA78688 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CEA786C0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CEA78A30 003299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000CEA7BCD0 000080 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22dffffff]
[ 0.000000] NODE_DATA [mem 0x22dff6000-0x22dffafff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbb231fff]
[ 0.000000] node 0: [mem 0xbb239000-0xbc247fff]
[ 0.000000] node 0: [mem 0xbc74e000-0xce799fff]
[ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x22dffffff]
[ 0.000000] On node 0 totalpages: 2081322
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13131 pages used for memmap
[ 0.000000] DMA32 zone: 840334 pages, LIFO batch:31
[ 0.000000] Normal zone: 19328 pages used for memmap
[ 0.000000] Normal zone: 1236992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb232000-0xbb238fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbc248000-0xbc74dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce79a000-0xce9adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce9ae000-0xcea93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea94000-0xcf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022dc00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2048778
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08871484-d630-41f6-a743-4086ad9f8628 rw noisy init=/usr/lib/systemd/systemd nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8112620K/8325288K available (5222K kernel code, 885K rwdata, 1644K rodata, 1116K init, 1284K bss, 212668K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3192.796 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6388.65 BogoMIPS (lpj=10642653)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000027] ACPI: Core revision 20140214
[ 0.007164] ACPI: All ACPI Tables successfully acquired
[ 0.008322] Security Framework initialized
[ 0.008326] Yama: becoming mindful.
[ 0.008691] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010281] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010989] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010996] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.011160] Initializing cgroup subsys memory
[ 0.011162] Initializing cgroup subsys devices
[ 0.011164] Initializing cgroup subsys freezer
[ 0.011165] Initializing cgroup subsys net_cls
[ 0.011166] Initializing cgroup subsys blkio
[ 0.011180] CPU: Physical Processor ID: 0
[ 0.011181] CPU: Processor Core ID: 0
[ 0.011958] mce: CPU supports 9 MCE banks
[ 0.011969] CPU0: Thermal monitoring enabled (TM1)
[ 0.011978] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.012042] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.012591] ftrace: allocating 20223 entries in 79 pages
[ 0.018707] dmar: Host address width 39
[ 0.018709] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.018715] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.018716] dmar: RMRR base: 0x000000ce92c000 end: 0x000000ce938fff
[ 0.018781] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.018781] HPET id 0 under DRHD base 0xfed90000
[ 0.018782] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.018855] Enabled IRQ remapping in x2apic mode
[ 0.018856] Enabling x2apic
[ 0.018856] Enabled x2apic
[ 0.018860] Switched APIC routing to cluster x2apic.
[ 0.019222] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052254] smpboot: CPU0: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (fam: 06, model: 3c, stepping: 03)
[ 0.052259] TSC deadline timer enabled
[ 0.052264] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.052268] ... version: 3
[ 0.052269] ... bit width: 48
[ 0.052270] ... generic registers: 8
[ 0.052270] ... value mask: 0000ffffffffffff
[ 0.052271] ... max period: 0000ffffffffffff
[ 0.052271] ... fixed-purpose events: 3
[ 0.052272] ... event mask: 00000007000000ff
[ 0.079047] x86: Booting SMP configuration:
[ 0.079048] .... node #0, CPUs: #1
[ 0.093027] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.099712] #2 #3
[ 0.134308] x86: Booted up 1 node, 4 CPUs
[ 0.134310] smpboot: Total of 4 processors activated (25552.63 BogoMIPS)
[ 0.136937] devtmpfs: initialized
[ 0.138913] PM: Registering ACPI NVS region [mem 0xbb232000-0xbb238fff] (28672 bytes)
[ 0.138915] PM: Registering ACPI NVS region [mem 0xce9ae000-0xcea93fff] (942080 bytes)
[ 0.139415] pinctrl core: initialized pinctrl subsystem
[ 0.139443] RTC time: 11:10:27, date: 06/26/14
[ 0.139466] NET: Registered protocol family 16
[ 0.139522] cpuidle: using governor ladder
[ 0.139522] cpuidle: using governor menu
[ 0.139531] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.139532] ACPI: bus type PCI registered
[ 0.139533] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.139569] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.139570] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.143859] PCI: Using configuration type 1 for base access
[ 0.144410] ACPI: Added _OSI(Module Device)
[ 0.144411] ACPI: Added _OSI(Processor Device)
[ 0.144412] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.144413] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.147021] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.148606] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.161070] ACPI: SSDT 0x00000000CE9A3C18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.161369] ACPI: Dynamic OEM Table Load:
[ 0.161370] ACPI: SSDT 0x0000000000000000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.174502] ACPI: SSDT 0x00000000CE9A3618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.174917] ACPI: Dynamic OEM Table Load:
[ 0.174918] ACPI: SSDT 0x0000000000000000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.184454] ACPI: SSDT 0x00000000CE9A2D98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.184763] ACPI: Dynamic OEM Table Load:
[ 0.184765] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.194062] ACPI: Interpreter enabled
[ 0.194068] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.194072] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.194082] ACPI: (supports S0 S3 S4 S5)
[ 0.194083] ACPI: Using IOAPIC for interrupt routing
[ 0.194102] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.199374] ACPI: Power Resource [FN00] (off)
[ 0.199419] ACPI: Power Resource [FN01] (off)
[ 0.199463] ACPI: Power Resource [FN02] (off)
[ 0.199506] ACPI: Power Resource [FN03] (off)
[ 0.199551] ACPI: Power Resource [FN04] (off)
[ 0.199896] ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
[ 0.199899] ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
[ 0.199901] ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
[ 0.199903] ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[ 0.200027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.200030] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.200156] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.200234] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.200577] PCI host bridge to bus 0000:00
[ 0.200579] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.200581] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.200582] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.200583] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.200584] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.200585] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.200586] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.200587] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.200587] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.200588] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.200589] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
[ 0.200595] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.200653] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.200679] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.200711] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.200755] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.200771] pci 0000:00:14.0: reg 0x10: [mem 0xf3220000-0xf322ffff 64bit]
[ 0.200822] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.200847] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.200874] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.200890] pci 0000:00:16.0: reg 0x10: [mem 0xf323c000-0xf323c00f 64bit]
[ 0.200945] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.200993] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[ 0.201006] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
[ 0.201013] pci 0000:00:16.3: reg 0x14: [mem 0xf323a000-0xf323afff]
[ 0.201114] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.201128] pci 0000:00:19.0: reg 0x10: [mem 0xf3200000-0xf321ffff]
[ 0.201135] pci 0000:00:19.0: reg 0x14: [mem 0xf3239000-0xf3239fff]
[ 0.201141] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.201192] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.201219] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.201246] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.201264] pci 0000:00:1a.0: reg 0x10: [mem 0xf3238000-0xf32383ff]
[ 0.201342] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.201378] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.201405] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.201416] pci 0000:00:1b.0: reg 0x10: [mem 0xf3230000-0xf3233fff 64bit]
[ 0.201476] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.201503] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.201526] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.201583] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.201611] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.201635] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.201692] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.201720] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.201750] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.201768] pci 0000:00:1d.0: reg 0x10: [mem 0xf3237000-0xf32373ff]
[ 0.201847] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.201883] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.201910] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
[ 0.202046] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.202058] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.202064] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.202070] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.202076] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.202081] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.202087] pci 0000:00:1f.2: reg 0x24: [mem 0xf3236000-0xf32367ff]
[ 0.202118] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.202161] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.202173] pci 0000:00:1f.3: reg 0x10: [mem 0xf3235000-0xf32350ff 64bit]
[ 0.202190] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.202273] pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
[ 0.202282] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
[ 0.202291] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.202300] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.202306] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.202312] pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref]
[ 0.202361] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.202388] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
[ 0.202397] pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff]
[ 0.208685] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.208687] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.208689] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
[ 0.208737] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.208807] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[ 0.208933] pci 0000:03:00.0: supports D1 D2
[ 0.208934] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208954] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.208973] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.208977] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.208981] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.208982] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.208983] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.208984] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.208985] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.208986] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.208987] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.208988] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.208989] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.208990] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[ 0.209061] pci 0000:04:00.0: [168c:002d] type 00 class 0x028000
[ 0.209095] pci 0000:04:00.0: reg 0x10: [mem 0xf3100000-0xf310ffff]
[ 0.209351] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.209364] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.209373] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209374] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff] (subtractive decode)
[ 0.209375] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209376] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209377] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.209378] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.209379] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.209380] pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.209381] pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.209382] pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.209383] pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.209384] pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.209385] pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.209386] pci 0000:03:00.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[ 0.209408] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.209784] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209814] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.209842] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209869] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.209897] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209925] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.209954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.209982] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.210114] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.210172] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210173] vgaarb: loaded
[ 0.210173] vgaarb: bridge control possible 0000:01:00.0
[ 0.210188] PCI: Using ACPI for IRQ routing
[ 0.211404] PCI: pci_cache_line_size set to 64 bytes
[ 0.211442] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.211443] e820: reserve RAM buffer [mem 0xbb232000-0xbbffffff]
[ 0.211444] e820: reserve RAM buffer [mem 0xbc248000-0xbfffffff]
[ 0.211445] e820: reserve RAM buffer [mem 0xce79a000-0xcfffffff]
[ 0.211446] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 0.211446] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
[ 0.211499] NetLabel: Initializing
[ 0.211500] NetLabel: domain hash size = 128
[ 0.211500] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.211507] NetLabel: unlabeled traffic allowed by default
[ 0.211519] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.211523] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.213540] Switched to clocksource hpet
[ 0.216475] pnp: PnP ACPI init
[ 0.216483] ACPI: bus type PNP registered
[ 0.216524] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.216527] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.216533] pnp 00:01: [dma 4]
[ 0.216544] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.216555] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.216614] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.216684] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.216686] system 00:04: [io 0xffff] has been reserved
[ 0.216687] system 00:04: [io 0xffff] has been reserved
[ 0.216688] system 00:04: [io 0xffff] has been reserved
[ 0.216689] system 00:04: [io 0x1c00-0x1cfe] has been reserved
[ 0.216690] system 00:04: [io 0x1d00-0x1dfe] has been reserved
[ 0.216691] system 00:04: [io 0x1e00-0x1efe] has been reserved
[ 0.216692] system 00:04: [io 0x1f00-0x1ffe] has been reserved
[ 0.216693] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.216695] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.216696] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216715] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.216745] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.216746] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.216822] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.216823] system 00:07: [io 0x0a30-0x0a3f] has been reserved
[ 0.216824] system 00:07: [io 0x0a20-0x0a2f] has been reserved
[ 0.216825] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216983] pnp 00:08: [dma 0 disabled]
[ 0.217013] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.217187] pnp 00:09: [dma 0 disabled]
[ 0.217255] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.217285] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.217286] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217303] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.217561] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.217562] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.217563] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.217564] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.217566] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.217567] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.217568] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.217569] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.217570] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.217572] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.217573] system 00:0c: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.217574] system 00:0c: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.217575] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217728] pnp: PnP ACPI: found 13 devices
[ 0.217729] ACPI: bus type PNP unregistered
[ 0.223413] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.223415] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.223417] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
[ 0.223421] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.223429] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.223436] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.223448] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.223452] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.223458] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.223459] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.223460] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.223461] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.223462] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.223463] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.223464] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.223465] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.223466] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.223467] pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff]
[ 0.223468] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.223469] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xf30fffff]
[ 0.223470] pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.223471] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.223472] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.223473] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.223474] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.223475] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.223476] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.223477] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.223478] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.223479] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.223480] pci_bus 0000:03: resource 13 [mem 0xd0000000-0xfeafffff]
[ 0.223481] pci_bus 0000:04: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.223482] pci_bus 0000:04: resource 5 [mem 0xf3100000-0xf31fffff]
[ 0.223483] pci_bus 0000:04: resource 8 [io 0x0000-0x0cf7]
[ 0.223484] pci_bus 0000:04: resource 9 [io 0x0d00-0xffff]
[ 0.223485] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.223486] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.223487] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.223488] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.223489] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.223490] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.223491] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.223492] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xfeafffff]
[ 0.223506] NET: Registered protocol family 2
[ 0.223609] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.223730] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.223895] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.223910] TCP: reno registered
[ 0.223917] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223944] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223988] NET: Registered protocol family 1
[ 0.256980] pci 0000:01:00.0: Boot video device
[ 0.256994] PCI: CLS 64 bytes, default 64
[ 0.257020] Unpacking initramfs...
[ 0.294705] Freeing initrd memory: 3168K (ffff8800379c0000 - ffff880037cd8000)
[ 0.294716] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.294717] software IO TLB [mem 0xca79a000-0xce79a000] (64MB) mapped at [ffff8800ca79a000-ffff8800ce799fff]
[ 0.294842] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.294863] Scanning for low memory corruption every 60 seconds
[ 0.294994] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.303763] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.304553] zbud: loaded
[ 0.304660] VFS: Disk quotas dquot_6.5.2
[ 0.304681] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.304745] msgmni has been set to 15851
[ 0.304773] Key type big_key registered
[ 0.304856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.304885] io scheduler noop registered
[ 0.304886] io scheduler deadline registered
[ 0.304909] io scheduler cfq registered (default)
[ 0.305005] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 0.305115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.305124] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.305139] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.305140] vesafb: scrolling: redraw
[ 0.305141] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.305727] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90004e80000, using 8128k, total 8128k
[ 0.421564] Console: switching to colour frame buffer device 240x67
[ 0.536923] fb0: VESA VGA frame buffer device
[ 0.536932] intel_idle: MWAIT substates: 0x42120
[ 0.536933] intel_idle: v0.4 model 0x3C
[ 0.536934] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.537045] GHES: HEST is not enabled!
[ 0.537073] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.557614] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.578155] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.578323] Linux agpgart interface v0.103
[ 0.578347] rtc_cmos 00:05: RTC can wake from S4
[ 0.578460] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.578493] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.578499] Intel P-state driver initializing.
[ 0.578506] Intel pstate controlling: cpu 0
[ 0.578516] Intel pstate controlling: cpu 1
[ 0.578525] Intel pstate controlling: cpu 2
[ 0.578533] Intel pstate controlling: cpu 3
[ 0.578547] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.578599] TCP: cubic registered
[ 0.578655] NET: Registered protocol family 10
[ 0.578791] NET: Registered protocol family 17
[ 0.579032] registered taskstats version 1
[ 0.579379] Magic number: 2:735:176
[ 0.579408] acpi device:39: hash matches
[ 0.579414] acpi device:0c: hash matches
[ 0.579465] rtc_cmos 00:05: setting system clock to 2014-06-26 11:10:28 UTC (1403781028)
[ 0.579516] PM: Hibernation image not present or could not be loaded.
[ 0.579998] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.579999] Write protecting the kernel read-only data: 8192k
[ 0.581473] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[ 0.582105] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.586339] random: systemd-tmpfile urandom read with 65 bits of entropy available
[ 0.587122] systemd-udevd[58]: starting version 213
[ 0.595903] ACPI: bus type USB registered
[ 0.595926] usbcore: registered new interface driver usbfs
[ 0.595933] usbcore: registered new interface driver hub
[ 0.596405] usbcore: registered new device driver usb
[ 0.596719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.596815] ehci-pci: EHCI PCI platform driver
[ 0.596919] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.596924] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.596934] ehci-pci 0000:00:1a.0: debug port 2
[ 0.597169] SCSI subsystem initialized
[ 0.598545] libata version 3.00 loaded.
[ 0.600825] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.600841] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3238000
[ 0.600943] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.601297] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.601307] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.610538] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.610659] hub 1-0:1.0: USB hub found
[ 0.610663] hub 1-0:1.0: 2 ports detected
[ 0.610845] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.610849] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.610858] ehci-pci 0000:00:1d.0: debug port 2
[ 0.614752] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.614762] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3237000
[ 0.623945] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.624126] hub 2-0:1.0: USB hub found
[ 0.624130] hub 2-0:1.0: 2 ports detected
[ 0.624306] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.624310] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.624428] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.624442] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.624616] hub 3-0:1.0: USB hub found
[ 0.624632] hub 3-0:1.0: 12 ports detected
[ 0.625905] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.625908] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.626071] hub 4-0:1.0: USB hub found
[ 0.626082] hub 4-0:1.0: 6 ports detected
[ 0.626739] ahci 0000:00:1f.2: version 3.0
[ 0.626827] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.626869] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.626871] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.631106] scsi0 : ahci
[ 0.631237] scsi1 : ahci
[ 0.631544] scsi2 : ahci
[ 0.631847] scsi3 : ahci
[ 0.632048] scsi4 : ahci
[ 0.632210] scsi5 : ahci
[ 0.632245] ata1: SATA max UDMA/133 abar m2048@0xf3236000 port 0xf3236100 irq 43
[ 0.632247] ata2: SATA max UDMA/133 abar m2048@0xf3236000 port 0xf3236180 irq 43
[ 0.632247] ata3: DUMMY
[ 0.632248] ata4: DUMMY
[ 0.632249] ata5: DUMMY
[ 0.632249] ata6: DUMMY
[ 0.917514] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.950851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.950865] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.951513] ata2.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max UDMA/100
[ 0.951515] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.952272] ata2.00: configured for UDMA/100
[ 0.965729] ata1.00: ATA-8: KINGSTON SV300S37A120G, 527ABBF0, max UDMA/133
[ 0.965731] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.975526] ata1.00: configured for UDMA/133
[ 0.975682] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 527A PQ: 0 ANSI: 5
[ 0.976133] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08M 01.0 PQ: 0 ANSI: 5
[ 0.979123] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.979131] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.979133] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 0.979142] sd 0:0:0:0: [sda] Write Protect is off
[ 0.979144] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.979150] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.979241] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.979242] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.979260] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.979452] sda: sda1 sda2 sda3
[ 0.979690] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.992405] sdb: sdb1 sdb2 sdb3 sdb4
[ 0.992837] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.041522] hub 1-1:1.0: USB hub found
[ 1.041639] hub 1-1:1.0: 6 ports detected
[ 1.147659] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.271718] hub 2-1:1.0: USB hub found
[ 1.271809] hub 2-1:1.0: 6 ports detected
[ 1.297769] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[ 1.431263] usb 3-5: new low-speed USB device number 2 using xhci_hcd
[ 1.537046] random: nonblocking pool is initialized
[ 1.556157] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.587430] systemd[1]: systemd 214 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 1.587513] systemd[1]: Detected architecture 'x86-64'.
[ 1.588205] systemd[1]: Set hostname to <XSign>.
[ 1.614195] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.626104] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.626132] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.626139] systemd[1]: Starting Remote File Systems.
[ 1.626581] systemd[1]: Reached target Remote File Systems.
[ 1.626590] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.626605] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.626610] systemd[1]: Starting Paths.
[ 1.626945] systemd[1]: Reached target Paths.
[ 1.626950] systemd[1]: Starting Encrypted Volumes.
[ 1.627363] systemd[1]: Reached target Encrypted Volumes.
[ 1.627373] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.628175] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.628182] systemd[1]: Expecting device dev-sdb4.device...
[ 1.628567] systemd[1]: Expecting device dev-sda1.device...
[ 1.628950] systemd[1]: Expecting device dev-sdb3.device...
[ 1.629332] systemd[1]: Starting Root Slice.
[ 1.632141] systemd[1]: Created slice Root Slice.
[ 1.632148] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.632697] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.632703] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.633212] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.633217] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.633664] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.633669] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.634133] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.634139] systemd[1]: Starting udev Control Socket.
[ 1.634558] systemd[1]: Listening on udev Control Socket.
[ 1.634564] systemd[1]: Starting udev Kernel Socket.
[ 1.634987] systemd[1]: Listening on udev Kernel Socket.
[ 1.634993] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.635469] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.635474] systemd[1]: Starting User and Session Slice.
[ 1.635984] systemd[1]: Created slice User and Session Slice.
[ 1.635990] systemd[1]: Starting Journal Socket.
[ 1.636382] systemd[1]: Listening on Journal Socket.
[ 1.636391] systemd[1]: Starting System Slice.
[ 1.636828] systemd[1]: Created slice System Slice.
[ 1.636837] systemd[1]: Started File System Check on Root Device.
[ 1.636841] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.637390] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.637397] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.638043] systemd[1]: Mounting Temporary Directory...
[ 1.639117] systemd[1]: Mounting Debug File System...
[ 1.639740] systemd[1]: Starting udev Coldplug all Devices...
[ 1.640987] systemd[1]: Started Load Kernel Modules.
[ 1.640998] systemd[1]: Mounted FUSE Control File System.
[ 1.641689] systemd[1]: Starting Apply Kernel Variables...
[ 1.642275] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.642976] systemd[1]: Starting Setup Virtual Console...
[ 1.644065] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 1.645742] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.646672] systemd[1]: Mounting Huge Pages File System...
[ 1.647253] systemd[1]: Mounting Configuration File System...
[ 1.648402] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.648413] systemd[1]: Starting system-getty.slice.
[ 1.649035] systemd[1]: Created slice system-getty.slice.
[ 1.649044] systemd[1]: Starting Journal Service...
[ 1.649940] systemd[1]: Started Journal Service.
[ 1.684590] systemd-udevd[160]: starting version 214
[ 1.714384] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.714388] ACPI: Power Button [PWRB]
[ 1.714417] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.714419] ACPI: Power Button [PWRF]
[ 1.716491] pps_core: LinuxPPS API ver. 1 registered
[ 1.716493] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.716760] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.717286] PTP clock support registered
[ 1.718023] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 1.721435] parport_pc 00:09: reported by Plug and Play ACPI
[ 1.721481] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 1.721541] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.721542] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 1.721903] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.721917] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1.748190] ACPI: Fan [FAN0] (off)
[ 1.748215] ACPI: Fan [FAN1] (off)
[ 1.748234] ACPI: Fan [FAN2] (off)
[ 1.748255] ACPI: Fan [FAN3] (off)
[ 1.748276] ACPI: Fan [FAN4] (off)
[ 1.749478] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.749479] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.749609] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.749610] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.757876] [drm] Initialized drm 1.1.0 20060810
[ 1.767187] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.774098] cfg80211: Calling CRDA to update world regulatory domain
[ 1.774823] usb 3-6: new full-speed USB device number 3 using xhci_hcd
[ 1.795673] Adding 16002224k swap on /dev/sdb4. Priority:-1 extents:1 across:16002224k FS
[ 1.801517] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 1.805001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.806877] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806888] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806895] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806928] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.823570] AVX2 version of gcm_enc/dec engaged.
[ 1.849773] nvidia: module license 'NVIDIA' taints kernel.
[ 1.849774] Disabling lock debugging due to kernel taint
[ 1.856456] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 1.856549] ppdev: user-space parallel port driver
[ 1.856785] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 1.856789] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.25 Tue May 27 11:05:28 PDT 2014
[ 1.993532] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.993533] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d4:35:86:a4:73
[ 1.993534] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.993584] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 1.993718] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 1.993806] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 1.993810] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 1.993950] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 1.994002] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 1.994003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.996461] iTCO_vendor_support: vendor-support=0
[ 1.996939] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.996968] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 2.005457] sound hdaudioC0D2: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.005458] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.005459] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.005459] sound hdaudioC0D2: mono: mono_out=0x0
[ 2.005460] sound hdaudioC0D2: dig-out=0x11/0x1e
[ 2.005460] sound hdaudioC0D2: inputs:
[ 2.005461] sound hdaudioC0D2: Rear Mic=0x18
[ 2.005462] sound hdaudioC0D2: Front Mic=0x19
[ 2.005462] sound hdaudioC0D2: Line=0x1a
[ 2.005463] sound hdaudioC0D2: CD=0x1c
[ 2.005463] sound hdaudioC0D2: dig-in=0x1f
[ 2.008421] systemd-udevd[162]: renamed network interface eth0 to eno1
[ 2.019322] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input6
[ 2.020297] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.020335] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.020370] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.020403] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.020435] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.020468] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.026197] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.132907] systemd-journald[153]: Received request to flush runtime journal from PID 1
[ 2.157519] ath: EEPROM regdomain: 0x809c
[ 2.157520] ath: EEPROM indicates we should expect a country code
[ 2.157520] ath: doing EEPROM country->regdmn map search
[ 2.157520] ath: country maps to regdmn code: 0x52
[ 2.157521] ath: Country alpha2 being used: CN
[ 2.157521] ath: Regpair used: 0x52
[ 2.160431] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.160562] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90006800000, irq=19
[ 2.181947] systemd-udevd[162]: renamed network interface wlan0 to wlp4s0
[ 2.298729] Switched to clocksource tsc
[ 2.376487] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 2.376547] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 2.376591] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 2.376632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 2.560514] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 3.062601] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
[ 3.592415] NVRM: Your system is not currently configured to drive a VGA console
[ 3.592417] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 3.592418] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 3.592419] NVRM: drivers including, but not limited to, vesafb, may result in
[ 3.592420] NVRM: corruption and stability problems, and is not supported.
[ 7.032503] usb 3-6: unable to read config index 0 descriptor/all
[ 7.032509] usb 3-6: can't read configurations, error -110
[ 7.299384] usb 3-11: new high-speed USB device number 5 using xhci_hcd
[ 7.769759] usb 3-6: new full-speed USB device number 6 using xhci_hcd
[ 7.973941] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.986288] usbcore: registered new interface driver usbhid
[ 7.986290] usbhid: USB HID core driver
[ 7.987065] input: HID 046a:0011 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046A:0011.0001/input/input17
[ 7.987234] hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:14.0-5/input0
[ 7.987314] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1532:0016.0002/input/input18
[ 7.987439] hid-generic 0003:1532:0016.0002: input,hidraw1: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-6/input0
[ 7.989050] mousedev: PS/2 mouse device common for all mice
[ 8.124996] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.136818] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.136826] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[ 8.136827] usb 3-11: hub failed to enable device, error -22
[ 8.226730] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.226799] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 8.296772] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.296839] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[ 8.296841] usb 3-11: hub failed to enable device, error -22
[ 8.456902] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.481367] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95848
[ 8.481369] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95800
[ 8.481370] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95890
[ 8.481371] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f958d8
[ 8.481372] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95920
[ 8.481373] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95968
[ 8.481374] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f959b0
[ 8.481751] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 8.491510] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 8.491667] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 8.491846] usbcore: registered new interface driver rt2800usb
[ 8.527024] systemd-udevd[163]: renamed network interface wlan0 to wlp0s20u11
[ 37.746771] fuse init (API version 7.23)
[ 162.364940] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 162.368409] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 162.630888] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 165.603287] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 165.711742] e1000e: eno1 NIC Link is Down
[ 165.815617] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 165.917212] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 165.917299] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 166.200400] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 169.526968] wlp0s20u11: authenticate with f8:d1:11:e0:43:42
[ 169.559811] wlp0s20u11: send auth to f8:d1:11:e0:43:42 (try 1/3)
[ 169.561558] wlp0s20u11: authenticated
[ 169.563460] wlp0s20u11: associate with f8:d1:11:e0:43:42 (try 1/3)
[ 169.566987] wlp0s20u11: RX AssocResp from f8:d1:11:e0:43:42 (capab=0x431 status=0 aid=2)
[ 169.569703] wlp0s20u11: associated
[ 169.569713] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u11: link becomes ready
[ 169.601748] wlp0s20u11: Limiting TX power to 20 (20 - 0) dBm as advertised by f8:d1:11:e0:43:42 -
Can't find 'vgaswitcheroo' (Can't compile asus-switcheroo)
Hi there!
I'm new to archlinux which I've installed recently on my ASUS UL50VT. It features a now abandoned concept of hybrid graphics which is why I tried to get asus-switcheroo to work. But somehow it won't compile which is why I'd like to kindly ask you what I've done wrong. I'll list what I've done so far:
I've installed both x86-video-intel and x86-video-nouveau package in this order.
I downloaded the latest version of asus-switcheroo with git to /opt:
git clone https://github.com/awilliam/asus-switcheroo.git /opt/asus-switcheroo
But while compiling as instructed within the README by simply calling make, I get many errors from which I managed to correct some, but not all of them.
First error
*** No rule to make target 'modules'
This could be fixed by installing linux-headers.
Second error
implicit declaration of function DEVICE_ACPI_HANDLE
This could be fixed by replacing all DEVICE_ACPI_HANDLE calls with ACPI_HANDLE since both functions do the same according to this source: https://git.kernel.org/cgit/linux/kerne … 14915420ac which I managed by calling
sed -i 's/DEVICE_ACPI_HANDLE/ACPI_HANDLE/g' /opt/asus-switcheroo/asus-switcheroo.c
Third error
/opt/asus-switcheroo/asus-switcheroo.c:326:3: error: too few arguments to function vga_switcheroo_register_client
vga_switcheroo_register_client(discrete dev,
^
include/linux/vga_switcheroo.h:47:5: note: declared here
int vga_switcheroo_register_client(struct pci_dev *dev,
I have no idea what's wrong here. Maybe vga_switcheroo.h was updated and thus asus-switcheroo won't work? I can't find any vga_switcheroo.h file in my /usr/include/linux/ directory, maybe it's just missing?
I'd be grateful for any answer!
Best regards,
Tomatopaste
Last edited by Tomatopaste (2015-01-23 19:58:25)Hi Lone_Wolf,
here are the requested logs. I hadn't installed a desktop environment until now, so here you'll get the first Xorg log from my machine.
I somehow saw a warning that the 'aic94xx firmware' is missing, but I don't know how to reproduce this message and how it is involved with this topic (if at least).
dmesg
[ 0.000000] CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=de31d952-ccf8-40bd-ad5a-0b7265bc5ef8 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000097c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdd6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdd70000-0x00000000bdd81fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdd82000-0x00000000bdddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bdde0000-0x00000000bddfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. UL50VT /UL50VT , BIOS 217 03/01/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbdd70 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdd6ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbdbfffff] page 2M
[ 0.000000] [mem 0xbdc00000-0xbdd6ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x376bc000-0x37b55fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F93C0 000024 (v02 030110)
[ 0.000000] ACPI: XSDT 0x00000000BDD70100 000084 (v01 _ASUS_ Notebook 20100301 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000BDD70290 0000F4 (v03 030110 FACP1011 20100301 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20140926/tbfadt-618)
[ 0.000000] ACPI: DSDT 0x00000000BDD70680 00F2F7 (v01 UL50V UL50V201 00000201 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BDD82000 000040
[ 0.000000] ACPI: APIC 0x00000000BDD70390 00005C (v01 030110 APIC1011 20100301 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000BDD70430 00003C (v01 030110 OEMMCFG 20100301 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000BDD70470 000176 (v01 _ASUS_ Notebook 20100301 MSFT 00000097)
[ 0.000000] ACPI: ECDT 0x00000000BDD70620 000054 (v01 030110 OEMECDT 20100301 MSFT 00000097)
[ 0.000000] ACPI: DBGP 0x00000000BDD703F0 000034 (v01 030110 DBGP1011 20100301 MSFT 00000097)
[ 0.000000] ACPI: BOOT 0x00000000BDD705F0 000028 (v01 030110 BOOT1011 20100301 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000BDD82040 000071 (v01 030110 OEMB1011 20100301 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BDD7F980 000038 (v01 030110 OEMHPET 20100301 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000BDD820C0 002024 (v01 030110 GMCHSCI 20100301 MSFT 00000097)
[ 0.000000] ACPI: ATKG 0x00000000BDD945F0 008024 (v01 _ASUS_ OEMATKG 20100301 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000BDD9D0C0 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00096fff]
[ 0.000000] node 0: [mem 0x00100000-0xbdd6ffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1039622
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3990 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12086 pages used for memmap
[ 0.000000] DMA32 zone: 773488 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x00097fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdd70000-0xbdd81fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdd82000-0xbdddffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdde0000-0xbddfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbde00000-0xbdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88013fc00000 s82880 r8192 d31808 u1048576
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023355
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=de31d952-ccf8-40bd-ad5a-0b7265bc5ef8 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4010084K/4158488K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 148404K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:8448 nr_irqs:440 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1339.043 MHz processor
[ 0.003354] Calibrating delay loop (skipped), value calculated using timer frequency.. 2679.67 BogoMIPS (lpj=4463476)
[ 0.003360] pid_max: default: 32768 minimum: 301
[ 0.003375] ACPI: Core revision 20140926
[ 0.028489] ACPI: All ACPI Tables successfully acquired
[ 0.030060] Security Framework initialized
[ 0.030072] Yama: becoming mindful.
[ 0.030730] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.033385] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.034550] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.034566] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.035030] Initializing cgroup subsys memory
[ 0.035043] Initializing cgroup subsys devices
[ 0.035049] Initializing cgroup subsys freezer
[ 0.035054] Initializing cgroup subsys net_cls
[ 0.035059] Initializing cgroup subsys blkio
[ 0.035101] CPU: Physical Processor ID: 0
[ 0.035103] CPU: Processor Core ID: 0
[ 0.035107] mce: CPU supports 6 MCE banks
[ 0.035118] CPU0: Thermal monitoring handled by SMI
[ 0.035129] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.035294] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.037287] ftrace: allocating 20931 entries in 82 pages
[ 0.047267] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080763] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz (fam: 06, model: 17, stepping: 0a)
[ 0.083333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.083333] ... version: 2
[ 0.083333] ... bit width: 40
[ 0.083333] ... generic registers: 2
[ 0.083333] ... value mask: 000000ffffffffff
[ 0.083333] ... max period: 000000007fffffff
[ 0.083333] ... fixed-purpose events: 3
[ 0.083333] ... event mask: 0000000700000003
[ 0.103453] x86: Booting SMP configuration:
[ 0.103457] .... node #0, CPUs: #1
[ 0.006666] CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.120106] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.120129] x86: Booted up 1 node, 2 CPUs
[ 0.120133] smpboot: Total of 2 processors activated (5358.34 BogoMIPS)
[ 0.123484] devtmpfs: initialized
[ 0.130099] PM: Registering ACPI NVS region [mem 0xbdd82000-0xbdddffff] (385024 bytes)
[ 0.132122] pinctrl core: initialized pinctrl subsystem
[ 0.132122] RTC time: 23:16:54, date: 02/13/15
[ 0.132122] NET: Registered protocol family 16
[ 0.146674] cpuidle: using governor ladder
[ 0.163340] cpuidle: using governor menu
[ 0.163400] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.163404] ACPI: bus type PCI registered
[ 0.163408] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.163547] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.163552] PCI: not using MMCONFIG
[ 0.163554] PCI: Using configuration type 1 for base access
[ 0.176795] ACPI: Added _OSI(Module Device)
[ 0.176795] ACPI: Added _OSI(Processor Device)
[ 0.176795] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.176795] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.181034] ACPI : EC: EC description table is found, configuring boot EC
[ 0.191149] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.194893] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.248437] ACPI: Dynamic OEM Table Load:
[ 0.248451] ACPI: SSDT 0xFFFF8801394F5600 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.249608] ACPI: Dynamic OEM Table Load:
[ 0.249622] ACPI: SSDT 0xFFFF880139ABE000 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.251135] ACPI: Dynamic OEM Table Load:
[ 0.251146] ACPI: SSDT 0xFFFF880139BF5B00 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.252164] ACPI: Dynamic OEM Table Load:
[ 0.252175] ACPI: SSDT 0xFFFF880139435600 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.253551] ACPI: Interpreter enabled
[ 0.253565] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.253575] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.253606] ACPI: (supports S0 S3 S4 S5)
[ 0.253609] ACPI: Using IOAPIC for interrupt routing
[ 0.253656] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.255000] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in ACPI motherboard resources
[ 0.255845] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270229] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.270241] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.270796] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.271360] PCI host bridge to bus 0000:00
[ 0.271367] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.271371] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.271376] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.271380] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.271384] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.271388] pci_bus 0000:00: root bus resource [mem 0xbde00000-0xffffffff]
[ 0.271405] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.271442] DMAR: Forcing write-buffer flush capability
[ 0.271445] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.271606] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.271683] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.271760] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.271849] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.271871] pci 0000:00:02.0: reg 0x10: [mem 0xfcc00000-0xfcffffff 64bit]
[ 0.271885] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271895] pci 0000:00:02.0: reg 0x20: [io 0xcc00-0xcc07]
[ 0.272124] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.272204] pci 0000:00:1a.0: reg 0x20: [io 0xc880-0xc89f]
[ 0.272384] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.272480] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.272560] pci 0000:00:1a.1: reg 0x20: [io 0xc800-0xc81f]
[ 0.272735] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.272830] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.272910] pci 0000:00:1a.2: reg 0x20: [io 0xc480-0xc49f]
[ 0.273087] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.273200] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.273236] pci 0000:00:1a.7: reg 0x10: [mem 0xfcbfbc00-0xfcbfbfff]
[ 0.273397] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.273547] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.273653] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.273688] pci 0000:00:1b.0: reg 0x10: [mem 0xfcbf4000-0xfcbf7fff 64bit]
[ 0.273841] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.273926] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.274023] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.274170] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.274258] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.274357] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.274513] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.274602] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.274704] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.274861] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.274949] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.275046] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.275126] pci 0000:00:1d.0: reg 0x20: [io 0xc400-0xc41f]
[ 0.275303] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.275403] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.275483] pci 0000:00:1d.1: reg 0x20: [io 0xc080-0xc09f]
[ 0.275657] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.275752] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.275833] pci 0000:00:1d.2: reg 0x20: [io 0xc000-0xc01f]
[ 0.276007] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.276118] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.276155] pci 0000:00:1d.7: reg 0x10: [mem 0xfcbfb800-0xfcbfbbff]
[ 0.276313] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.276460] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.276559] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.276727] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.276822] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.277143] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.277183] pci 0000:00:1f.2: reg 0x10: [io 0xbc00-0xbc07]
[ 0.277199] pci 0000:00:1f.2: reg 0x14: [io 0xb880-0xb883]
[ 0.277216] pci 0000:00:1f.2: reg 0x18: [io 0xb800-0xb807]
[ 0.277232] pci 0000:00:1f.2: reg 0x1c: [io 0xb480-0xb483]
[ 0.277249] pci 0000:00:1f.2: reg 0x20: [io 0xb400-0xb41f]
[ 0.277265] pci 0000:00:1f.2: reg 0x24: [mem 0xfcbfb000-0xfcbfb7ff]
[ 0.277365] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.277724] pci 0000:01:00.0: [10de:0a74] type 00 class 0x030000
[ 0.277803] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.277879] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.277955] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.277998] pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.278042] pci 0000:01:00.0: reg 0x30: [mem 0xfe980000-0xfe9fffff pref]
[ 0.278649] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.278743] pci 0000:01:00.1: reg 0x10: [mem 0xfe97c000-0xfe97ffff]
[ 0.283406] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.283413] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.283419] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 0.283427] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xfbffffff 64bit pref]
[ 0.283547] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.283721] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.283764] pci 0000:03:00.0: reg 0x10: [mem 0xfeaf0000-0xfeafffff 64bit]
[ 0.283968] pci 0000:03:00.0: supports D1
[ 0.283973] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.284026] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.290025] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.290037] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.290206] pci 0000:04:00.0: [1969:1063] type 00 class 0x020000
[ 0.290249] pci 0000:04:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.290270] pci 0000:04:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.290456] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.290508] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.296694] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.296702] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.296710] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.296857] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.296877] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.296882] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.296886] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.296890] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.296895] pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xffffffff] (subtractive decode)
[ 0.296966] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.298079] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.298182] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.298278] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.298370] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.298467] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.298561] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.298657] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.298754] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.299050] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.299200] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.299357] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.299357] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.299357] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.299357] vgaarb: loaded
[ 0.299357] vgaarb: bridge control possible 0000:01:00.0
[ 0.299357] vgaarb: no bridge control possible 0000:00:02.0
[ 0.299357] PCI: Using ACPI for IRQ routing
[ 0.312663] PCI: pci_cache_line_size set to 64 bytes
[ 0.312757] e820: reserve RAM buffer [mem 0x00097c00-0x0009ffff]
[ 0.312761] e820: reserve RAM buffer [mem 0xbdd70000-0xbfffffff]
[ 0.312995] NetLabel: Initializing
[ 0.312998] NetLabel: domain hash size = 128
[ 0.313000] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.313027] NetLabel: unlabeled traffic allowed by default
[ 0.313059] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.313068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.313076] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.314361] Switched to clocksource hpet
[ 0.325712] pnp: PnP ACPI init
[ 0.325899] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.325907] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.326035] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.326142] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.326267] pnp 00:03: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.326625] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.326631] system 00:04: [io 0x04c0-0x04cf] has been reserved
[ 0.326636] system 00:04: [io 0x04d2-0x04ff] has been reserved
[ 0.326641] system 00:04: [io 0x0800-0x087f] could not be reserved
[ 0.326646] system 00:04: [io 0x0400-0x041f] has been reserved
[ 0.326651] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.326657] system 00:04: [mem 0xfcbfac00-0xfcbfacff window] has been reserved
[ 0.326662] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.326667] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.326688] system 00:04: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.326693] system 00:04: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.326698] system 00:04: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.326703] system 00:04: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.326709] system 00:04: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.326718] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.326723] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.326729] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.326931] system 00:05: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.326937] system 00:05: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.326943] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.327081] system 00:06: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.327088] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.327233] system 00:07: [io 0x0250-0x0253] has been reserved
[ 0.327239] system 00:07: [io 0x0256-0x025f] has been reserved
[ 0.327244] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.327249] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.327254] system 00:07: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.327259] system 00:07: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.327265] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.327452] system 00:08: [mem 0xc0000000-0xcfffffff] has been reserved
[ 0.327458] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.327960] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.327966] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.327972] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.327977] system 00:09: [mem 0x00100000-0xbddfffff] could not be reserved
[ 0.327983] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.328223] pnp: PnP ACPI: found 10 devices
[ 0.337514] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.337522] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.337529] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 0.337535] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xfbffffff 64bit pref]
[ 0.337543] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.337563] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.337573] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.337588] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.337594] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.337603] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.337618] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.337639] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.337644] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.337648] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.337652] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.337656] pci_bus 0000:00: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.337660] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.337664] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe9fffff]
[ 0.337669] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xfbffffff 64bit pref]
[ 0.337673] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.337678] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.337682] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.337686] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.337690] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.337694] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.337698] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.337702] pci_bus 0000:05: resource 8 [mem 0xbde00000-0xffffffff]
[ 0.337752] NET: Registered protocol family 2
[ 0.338080] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.338272] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.338506] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.338563] TCP: reno registered
[ 0.338575] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.338625] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.338740] NET: Registered protocol family 1
[ 0.338774] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.340448] PCI: CLS 32 bytes, default 64
[ 0.340535] Unpacking initramfs...
[ 0.493501] Freeing initrd memory: 4712K (ffff8800376bc000 - ffff880037b56000)
[ 0.493521] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.493526] software IO TLB [mem 0xb9d70000-0xbdd70000] (64MB) mapped at [ffff8800b9d70000-ffff8800bdd6ffff]
[ 0.493580] Simple Boot Flag at 0x51 set to 0x1
[ 0.493841] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[ 0.493857] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[ 0.493982] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.494036] Scanning for low memory corruption every 60 seconds
[ 0.494581] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.494616] Initialise system trusted keyring
[ 0.495303] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.498905] zpool: loaded
[ 0.498910] zbud: loaded
[ 0.499261] VFS: Disk quotas dquot_6.5.2
[ 0.499340] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.499572] msgmni has been set to 7841
[ 0.499687] Key type big_key registered
[ 0.500083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.500147] io scheduler noop registered
[ 0.500153] io scheduler deadline registered
[ 0.500225] io scheduler cfq registered (default)
[ 0.500526] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.500800] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.501080] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.501355] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.501574] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.501580] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.501584] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.501590] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.501625] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.501634] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.501670] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.501675] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.501682] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.501717] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.501721] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.501729] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.501764] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.501826] pciehp 0000:00:01.0:pcie04: Slot #16 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep-
[ 0.501871] pciehp 0000:00:01.0:pcie04: service driver pciehp loaded
[ 0.501884] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.501955] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.501958] vesafb: scrolling: redraw
[ 0.501962] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.501990] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
[ 0.544569] Console: switching to colour frame buffer device 128x48
[ 0.586961] fb0: VESA VGA frame buffer device
[ 0.587001] intel_idle: does not run on family 6 model 23
[ 0.587083] GHES: HEST is not enabled!
[ 0.587203] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.588055] Linux agpgart interface v0.103
[ 0.588131] rtc_cmos 00:01: RTC can wake from S4
[ 0.588347] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.588388] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.588416] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.588631] TCP: cubic registered
[ 0.588865] NET: Registered protocol family 10
[ 0.589295] NET: Registered protocol family 17
[ 0.589845] Loading compiled-in X.509 certificates
[ 0.589871] registered taskstats version 1
[ 0.590711] Magic number: 3:113:302
[ 0.590730] tty tty31: hash matches
[ 0.590842] rtc_cmos 00:01: setting system clock to 2015-02-13 23:16:54 UTC (1423869414)
[ 0.590947] PM: Hibernation image not present or could not be loaded.
[ 0.593201] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 0.593204] Write protecting the kernel read-only data: 8192k
[ 0.596883] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 0.598623] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 0.610854] random: systemd-tmpfile urandom read with 3 bits of entropy available
[ 0.620562] [drm] Initialized drm 1.1.0 20060810
[ 0.624049] wmi: Mapper loaded
[ 0.625180] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.625188] ACPI: Sleep Button [SLPB]
[ 0.625308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.627655] ACPI: Lid Switch [LID]
[ 0.627792] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.627799] ACPI: Power Button [PWRF]
[ 0.637317] MXM: GUID detected in BIOS
[ 0.637379] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20140926/exoparg2-420)
[ 0.637392] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_._DSM] (Node ffff88013b03c2d0), AE_AML_PACKAGE_LIMIT (20140926/psparse-536)
[ 0.637411] ACPI: \_SB_.PCI0.VGA_: failed to evaluate _DSM (0x300b)
[ 0.637419] ACPI Warning: \_SB_.PCI0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 0.637446] ACPI: \_SB_.PCI0.VGA_: failed to evaluate _DSM
[ 0.637495] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20140926/exoparg2-420)
[ 0.637504] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_._DSM] (Node ffff88013b03c2d0), AE_AML_PACKAGE_LIMIT (20140926/psparse-536)
[ 0.637516] ACPI Error: Method parse/execution failed [\_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013b040370), AE_AML_PACKAGE_LIMIT (20140926/psparse-536)
[ 0.637530] ACPI: \_SB_.PCI0.P0P1.VGA_: failed to evaluate _DSM (0x300b)
[ 0.637538] ACPI Warning: \_SB_.PCI0.P0P1.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
[ 0.637573] ACPI: \_SB_.PCI0.P0P1.VGA_: failed to evaluate _DSM
[ 0.637612] checking generic (d0000000 300000) vs hw (e0000000 10000000)
[ 0.637616] checking generic (d0000000 300000) vs hw (fa000000 2000000)
[ 0.637683] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[ 0.638141] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8a00a2
[ 0.638147] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 0.638150] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 0.638209] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 0.638215] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 0.638219] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 0.680880] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 0.680884] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 1.496692] tsc: Refined TSC clocksource calibration: 1338.999 MHz
[ 2.040809] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 2.040815] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 2.041016] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 2.041022] nouveau [ VBIOS][0000:01:00.0] version 70.18.1f.00.27
[ 2.041768] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 2.041777] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 2.162451] nouveau 0000:01:00.0: irq 28 for MSI/MSI-X
[ 2.162467] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 2.162514] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 2.162518] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 2.162521] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 2.496759] Switched to clocksource tsc
[ 3.230022] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 3.230040] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 3.230047] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 3.250103] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 3.250111] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[ 3.250118] nouveau [ CLK][0000:01:00.0] 0f: core 606 MHz shader 1468 MHz memory 790 MHz
[ 3.250153] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 3.250379] [TTM] Zone kernel: Available graphics memory: 2008478 kiB
[ 3.250383] [TTM] Initializing pool allocator
[ 3.250393] [TTM] Initializing DMA pool allocator
[ 3.250414] nouveau [ DRM] VRAM: 512 MiB
[ 3.250417] nouveau [ DRM] GART: 1048576 MiB
[ 3.250424] nouveau [ DRM] TMDS table version 2.0
[ 3.250428] nouveau [ DRM] DCB version 4.0
[ 3.250432] nouveau [ DRM] DCB outp 00: 01000323 00010034
[ 3.250437] nouveau [ DRM] DCB outp 01: 02014300 00000000
[ 3.250440] nouveau [ DRM] DCB outp 02: 02032312 00020010
[ 3.250444] nouveau [ DRM] DCB conn 00: 00000040
[ 3.250448] nouveau [ DRM] DCB conn 01: 00410146
[ 3.250452] nouveau [ DRM] DCB conn 02: 00001261
[ 3.250455] nouveau [ DRM] DCB conn 03: 00002330
[ 3.250458] nouveau [ DRM] DCB conn 04: 00000400
[ 3.250462] nouveau [ DRM] DCB conn 05: 00000660
[ 3.250465] nouveau [ DRM] DCB conn 06: 00000500
[ 3.272150] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.272153] [drm] Driver supports precise vblank timestamp query.
[ 3.295922] nouveau [ DRM] MM: using COPY for buffer copies
[ 3.403865] nouveau 0000:01:00.0: No connectors reported connected with modes
[ 3.403870] [drm] Cannot find any crtc or sizes - going 1024x768
[ 3.411692] nouveau [ DRM] allocated 1024x768 fb: 0x70000, bo ffff880139390000
[ 3.411805] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 3.411810] nouveau 0000:01:00.0: registered panic notifier
[ 3.440035] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 0
[ 3.475327] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.488962] i8042: Detected active multiplexing controller, rev 1.1
[ 3.492052] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.492140] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.492204] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.492266] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.492323] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.493591] ACPI: bus type USB registered
[ 3.493784] usbcore: registered new interface driver usbfs
[ 3.493819] usbcore: registered new interface driver hub
[ 3.493862] usbcore: registered new device driver usb
[ 3.494794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.495461] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.495790] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.495804] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.495817] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 3.495866] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
[ 3.496222] hub 1-0:1.0: USB hub found
[ 3.496237] hub 1-0:1.0: 2 ports detected
[ 3.497165] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.497184] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.497201] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 3.497247] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
[ 3.497283] ehci-pci: EHCI PCI platform driver
[ 3.497572] hub 2-0:1.0: USB hub found
[ 3.497587] hub 2-0:1.0: 2 ports detected
[ 3.498807] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 3.498820] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 3.498841] ehci-pci 0000:00:1a.7: debug port 1
[ 3.502782] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 3.502811] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfcbfbc00
[ 3.506138] SCSI subsystem initialized
[ 3.509673] libata version 3.00 loaded.
[ 3.510067] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.510448] hub 3-0:1.0: USB hub found
[ 3.510465] hub 3-0:1.0: 6 ports detected
[ 3.533462] hub 1-0:1.0: USB hub found
[ 3.533483] hub 1-0:1.0: 2 ports detected
[ 3.556794] hub 2-0:1.0: USB hub found
[ 3.556812] hub 2-0:1.0: 2 ports detected
[ 3.557635] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.557649] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 3.557671] ehci-pci 0000:00:1d.7: debug port 1
[ 3.561596] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 3.561625] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcbfb800
[ 3.570018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.570339] hub 4-0:1.0: USB hub found
[ 3.570355] hub 4-0:1.0: 6 ports detected
[ 3.572162] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.572176] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.572188] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 3.572235] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
[ 3.572731] hub 5-0:1.0: USB hub found
[ 3.572749] hub 5-0:1.0: 2 ports detected
[ 3.573582] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.573596] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.573608] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.573636] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 3.573961] hub 6-0:1.0: USB hub found
[ 3.573976] hub 6-0:1.0: 2 ports detected
[ 3.574635] ahci 0000:00:1f.2: version 3.0
[ 3.574797] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 3.574843] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.574883] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 3.574889] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 3.579654] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.581533] scsi host0: ahci
[ 3.581745] scsi host1: ahci
[ 3.581936] scsi host2: ahci
[ 3.582136] scsi host3: ahci
[ 3.582272] ata1: SATA max UDMA/133 abar m2048@0xfcbfb000 port 0xfcbfb100 irq 29
[ 3.582278] ata2: SATA max UDMA/133 abar m2048@0xfcbfb000 port 0xfcbfb180 irq 29
[ 3.582281] ata3: DUMMY
[ 3.582284] ata4: DUMMY
[ 3.582430] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.582443] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.582455] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.582483] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
[ 3.582876] hub 7-0:1.0: USB hub found
[ 3.582896] hub 7-0:1.0: 2 ports detected
[ 3.583709] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.583724] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.583735] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.583764] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
[ 3.584143] hub 8-0:1.0: USB hub found
[ 3.584161] hub 8-0:1.0: 2 ports detected
[ 3.876693] usb 4-5: new high-speed USB device number 2 using ehci-pci
[ 3.900044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.900989] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3.944689] ata1.00: ATA-8: ST9500325AS, 0002SDM1, max UDMA/133
[ 3.944695] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.946593] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3.946916] ata1.00: configured for UDMA/133
[ 3.947073] scsi 0:0:0:0: Direct-Access ATA ST9500325AS SDM1 PQ: 0 ANSI: 5
[ 4.003359] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 4.185325] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.197466] usbcore: registered new interface driver usbhid
[ 4.197470] usbhid: USB HID core driver
[ 4.266697] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.268256] ACPI Error: Attempt to CreateField of length zero (20140926/dsopcode-168)
[ 4.268265] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff88013b0252a8), AE_AML_OPERAND_VALUE (20140926/psparse-536)
[ 4.268278] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.PRT1._GTF] (Node ffff88013b025438), AE_AML_OPERAND_VALUE (20140926/psparse-536)
[ 4.268292] ata2.00: _GTF evaluation failed (AE 0x3004)
[ 4.268298] ata2.00: ATAPI: MATSHITADVD-RAM UJ892AS, 1.00, max UDMA/100
[ 4.270437] ACPI Error: Attempt to CreateField of length zero (20140926/dsopcode-168)
[ 4.270445] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff88013b0252a8), AE_AML_OPERAND_VALUE (20140926/psparse-536)
[ 4.270457] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.PRT1._GTF] (Node ffff88013b025438), AE_AML_OPERAND_VALUE (20140926/psparse-536)
[ 4.270469] ata2.00: _GTF evaluation failed (AE 0x3004)
[ 4.270476] ata2.00: configured for UDMA/100
[ 4.273545] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ892AS 1.00 PQ: 0 ANSI: 5
[ 4.289164] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.289388] sd 0:0:0:0: [sda] Write Protect is off
[ 4.289394] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.289446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.298886] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.298891] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.299122] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.387649] sda: sda1 sda2 sda3
[ 4.388260] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.165421] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.827292] random: nonblocking pool is initialized
[ 6.249715] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 9.249925] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ 9.835819] Monitor-Mwait will be used to enter C-1 state
[ 9.835834] Monitor-Mwait will be used to enter C-3 state
[ 9.835850] tsc: Marking TSC unstable due to TSC halts in idle
[ 9.835870] ACPI: acpi_idle registered with cpuidle
[ 9.836816] Switched to clocksource hpet
[ 10.069934] asus_laptop: Asus Laptop Support version 0.42
[ 10.070309] asus_laptop: UL50VT model detected
[ 10.070996] asus_laptop: Backlight controlled by ACPI video driver
[ 10.071105] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input8
[ 10.091898] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.120152] ACPI: AC Adapter [AC0] (on-line)
[ 10.130629] ACPI: Battery Slot [BAT0] (battery absent)
[ 10.143044] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 10.143085] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 10.144443] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 10.145893] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.237096] [drm] Memory usable by graphics device = 2048M
[ 10.237104] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 10.237108] fb: switching to inteldrmfb from VESA VGA
[ 10.237141] Console: switching to colour dummy device 80x25
[ 10.237256] [drm] Replacing VGA console driver
[ 10.256776] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 10.256793] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.256795] [drm] Driver supports precise vblank timestamp query.
[ 10.256962] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 10.256969] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 10.278231] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.278237] ACPI: Thermal Zone [THRM] (52 C)
[ 10.331552] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.341139] acpi device:35: registered as cooling_device2
[ 10.341288] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 10.341473] ACPI: Video Device [VGA1] (multi-head: yes rom: yes post: no)
[ 10.349368] acpi device:38: registered as cooling_device3
[ 10.349508] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/LNXVIDEO:01/input/input10
[ 10.349629] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 1
[ 10.352043] fbcon: inteldrmfb (fb0) is primary device
[ 10.360581] atl1c 0000:04:00.0: version 1.0.1.1-NAPI
[ 10.449836] cfg80211: Calling CRDA to update world regulatory domain
[ 10.537675] snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 10.537833] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 10.537848] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 10.601053] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 10.627249] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:09DA:000A.0001/input/input13
[ 10.627403] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1a.2-1/input0
[ 10.629202] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMIO) (20140926/utaddress-258)
[ 10.629204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.629212] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140926/utaddress-258)
[ 10.629213] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.629218] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140926/utaddress-258)
[ 10.629219] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.629220] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.751941] atl1c 0000:04:00.0 enp4s0: renamed from eth0
[ 10.753682] iTCO_vendor_support: vendor-support=0
[ 10.757224] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.757286] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860)
[ 10.757473] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.767991] media: Linux media interface: v0.10
[ 10.768365] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.768368] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.768371] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 10.768374] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.768376] sound hdaudioC0D0: inputs:
[ 10.768379] sound hdaudioC0D0: Internal Mic=0x19
[ 10.768382] sound hdaudioC0D0: Mic=0x18
[ 10.784405] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 10.784559] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 10.805939] mousedev: PS/2 mouse device common for all mice
[ 10.905197] ath: phy0: Enable LNA combining
[ 10.906723] ath: EEPROM regdomain: 0x60
[ 10.906724] ath: EEPROM indicates we should expect a direct regpair map
[ 10.906727] ath: Country alpha2 being used: 00
[ 10.906728] ath: Regpair used: 0x60
[ 10.916012] Linux video capture interface: v2.00
[ 10.960696] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.961361] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900108a0000, irq=17
[ 11.020175] Console: switching to colour frame buffer device 170x48
[ 11.025609] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 11.069454] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 11.143846] uvcvideo: Found UVC 1.00 device USB 2.0 UVC 0.3M Webcam (064e:a136)
[ 11.212581] input: USB 2.0 UVC 0.3M Webcam as /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5:1.0/input/input19
[ 11.212733] usbcore: registered new interface driver uvcvideo
[ 11.212737] USB Video Class driver (1.1.1)
[ 11.505065] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 11.505565] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 11.505727] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[ 11.508111] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[ 11.520949] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
[ 11.555722] psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
[ 11.687832] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input16
[ 11.726521] fuse init (API version 7.23)
[ 13.706440] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 14.728742] cfg80211: Calling CRDA to update world regulatory domain
[ 14.933942] wlp3s0: authenticate with 9c:c7:a6:9d:11:85
[ 14.954294] wlp3s0: send auth to 9c:c7:a6:9d:11:85 (try 1/3)
[ 14.957072] wlp3s0: authenticated
[ 14.957166] ath9k 0000:03:00.0 wlp3s0: disabling HT/VHT due to WEP/TKIP use
[ 14.960051] wlp3s0: associate with 9c:c7:a6:9d:11:85 (try 1/3)
[ 14.964612] wlp3s0: RX AssocResp from 9c:c7:a6:9d:11:85 (capab=0x431 status=0 aid=2)
[ 14.964799] wlp3s0: associated
[ 14.964832] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 14.964879] cfg80211: Calling CRDA to update world regulatory domain
[ 86.589432] wlp3s0: deauthenticating from 9c:c7:a6:9d:11:85 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 86.604834] cfg80211: Calling CRDA for country: DE
[ 87.130043] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 87.646459] PM: Syncing filesystems ... done.
[ 87.874250] PM: Preparing system for mem sleep
[ 87.981527] cfg80211: Calling CRDA for country: DE
[ 88.187563] wlp3s0: authenticate with 9c:c7:a6:9d:11:85
[ 88.206764] wlp3s0: send auth to 9c:c7:a6:9d:11:85 (try 1/3)
[ 88.210823] wlp3s0: authenticated
[ 88.210943] ath9k 0000:03:00.0 wlp3s0: disabling HT/VHT due to WEP/TKIP use
[ 88.213398] wlp3s0: associate with 9c:c7:a6:9d:11:85 (try 1/3)
[ 88.228351] wlp3s0: RX AssocResp from 9c:c7:a6:9d:11:85 (capab=0x431 status=0 aid=2)
[ 88.228477] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 88.228610] wlp3s0: associated
[ 88.260541] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 88.261754] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 88.262907] PM: Entering mem sleep
[ 88.262965] Suspending console(s) (use no_console_suspend to debug)
[ 88.263453] wlp3s0: deauthenticating from 9c:c7:a6:9d:11:85 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 88.278019] cfg80211: Calling CRDA to update world regulatory domain
[ 88.278276] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 88.301719] nouveau [ DRM] suspending console...
[ 88.301723] nouveau [ DRM] suspending display...
[ 88.301791] nouveau [ DRM] evicting buffers...
[ 88.323902] sd 0:0:0:0: [sda] Stopping disk
[ 88.325601] nouveau [ DRM] waiting for kernel channels to go idle...
[ 88.325631] nouveau [ DRM] suspending client object trees...
[ 88.326189] nouveau [ DRM] suspending kernel object tree...
[ 89.823558] PM: suspend of devices complete after 1560.185 msecs
[ 89.836821] PM: late suspend of devices complete after 13.256 msecs
[ 89.837589] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 89.837674] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 89.837709] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 89.837783] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 89.837946] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 89.837988] uhci_hcd 0000:00:1a.2: System wakeup enabled by ACPI
[ 89.838068] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 89.838099] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 89.850219] PM: noirq suspend of devices complete after 13.392 msecs
[ 89.850934] ACPI: Preparing to enter system sleep state S3
[ 90.058347] PM: Saving platform NVS memory
[ 90.058822] Disabling non-boot CPUs ...
[ 90.060166] kvm: disabling virtualization on CPU1
[ 90.060183] smpboot: CPU 1 is now offline
[ 90.060455] ACPI: Low-level resume complete
[ 90.060455] PM: Restoring platform NVS memory
[ 90.060455] CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 90.060455] Enabling non-boot CPUs ...
[ 90.060455] x86: Booting SMP configuration:
[ 90.060455] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 90.060171] CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 90.060171] kvm: enabling virtualization on CPU1
[ 90.083422] CPU1 is up
[ 90.086740] ACPI: Waking up from system sleep state S3
[ 90.467191] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 90.467277] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 90.467360] uhci_hcd 0000:00:1a.2: System wakeup disabled by ACPI
[ 90.467763] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 90.467886] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 90.467930] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 90.480340] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 90.480889] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 90.481179] PM: noirq resume of devices complete after 14.222 msecs
[ 90.481664] PM: early resume of devices complete after 0.403 msecs
[ 90.482155] usb usb1: root hub lost power or was reset
[ 90.482333] usb usb2: root hub lost power or was reset
[ 90.482480] usb usb5: root hub lost power or was reset
[ 90.482753] snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 90.482953] usb usb7: root hub lost power or was reset
[ 90.483018] usb usb6: root hub lost power or was reset
[ 90.483143] usb usb8: root hub lost power or was reset
[ 90.484247] sd 0:0:0:0: [sda] Starting disk
[ 90.590115] usb 4-5: reset high-speed USB device number 2 using ehci-pci
[ 90.813388] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 90.814908] ACPI Error: Attempt to CreateField of length zero (20140926/dsopcode-168)
[ 90.814918] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff88013b0252a8), AE_AML_OPERAND_VALUE (20140926/psparse-536)
[ 90.814928] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.PRT1._GTF] (Node ffff88013b025438), AE_AML_OPERAND_VALUE (20140926/psparse-536)
[ 90.814933] ata2.00: _GTF evaluation failed (AE 0x3004)
[ 90.820242] ACPI Error: Attempt to CreateField of length zero (20140926/dsopcode-168)
[ 90.820251] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff88013b0252a8), AE_AML_OPERAND_VALUE (20140926/psparse-536)
[ 90.820260] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.PRT1._GTF] (Node ffff88013b025438), AE_AML_OPERAND_VALUE (20140926/psparse-536)
[ 90.820265] ata2.00: _GTF evaluation failed (AE 0x3004)
[ 90.820270] ata2.00: configured for UDMA/100
[ 90.956750] usb 5-1: reset low-speed USB device number 2 using uhci_hcd
[ 91.586709] pciehp 0000:00:01.0:pcie04: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
[ 91.586712] pciehp 0000:00:01.0:pcie04: Cannot add device at 0000:01:00
[ 91.586756] nouveau [ DRM] re-enabling device...
[ 91.586770] nouveau [ DRM] resuming kernel object tree...
[ 91.586787] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 91.590080] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 91.756719] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 91.758296] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 91.760614] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 91.760952] ata1.00: configured for UDMA/133
[ 91.854464] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 91.874532] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 91.875374] nouveau [ DRM] resuming client object trees...
[ 91.875680] nouveau [ DRM] resuming display...
[ 91.875912] nouveau [ DRM] resuming console...
[ 91.907339] PM: resume of devices complete after 1425.668 msecs
[ 91.908120] PM: Finishing wakeup.
[ 91.908123] Restarting tasks ... done.
[ 91.916718] video LNXVIDEO:00: Restoring backlight state
[ 91.926430] video LNXVIDEO:01: Restoring backlight state
[ 92.810327] cfg80211: Calling CRDA to update world regulatory domain
[ 93.020885] wlp3s0: authenticate with 9c:c7:a6:9d:11:85
[ 93.040151] wlp3s0: send auth to 9c:c7:a6:9d:11:85 (try 1/3)
[ 93.042947] wlp3s0: authenticated
[ 93.043061] ath9k 0000:03:00.0 wlp3s0: disabling HT/VHT due to WEP/TKIP use
[ 93.043371] wlp3s0: associate with 9c:c7:a6:9d:11:85 (try 1/3)
[ 93.047832] wlp3s0: RX AssocResp from 9c:c7:a6:9d:11:85 (capab=0x431 status=0 aid=2)
[ 93.047947] wlp3s0: associated
[ 93.048054] cfg80211: Calling CRDA to update world regulatory domain
[ 93.650929] wlp3s0: deauthenticating from 9c:c7:a6:9d:11:85 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 93.666244] cfg80211: Calling CRDA to update world regulatory domain
journalctl -b
-- Logs begin at Mon 2014-12-22 03:15:41 CET, end at Fri 2015-02-13 23:20:23 CET. --
Feb 13 23:17:01 MarcNB systemd-journal[117]: Runtime journal is using 8.0M (max allowed 196.1M, trying to leave 294.2M free of 1.9G available → current limit 196.1M).
Feb 13 23:17:02 MarcNB systemd-journal[117]: Permanent journal is using 32.0M (max allowed 2.0G, trying to leave 3.0G free of 17.7G available → current limit 2.0G).
Feb 13 23:17:02 MarcNB systemd-journal[117]: Time spent on flushing to /var is 362.907ms for 2 entries.
Feb 13 23:17:02 MarcNB kernel: CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
Feb 13 23:17:02 MarcNB kernel: Initializing cgroup subsys cpuset
Feb 13 23:17:02 MarcNB kernel: Initializing cgroup subsys cpu
Feb 13 23:17:02 MarcNB kernel: Initializ
Maybe you are looking for
-
Help Sharp LCD TV HDMI SwitchResX and displayconfigX
Hi, the last Mac I used extensively was my 1984 version with 128K RAM as 1 internal and 1 external 3.5" drive ...... so, well, I guess you could call me a total noob with 10.4. Anyways, I just bought a new Core Duo. I'm trying to hook it up to my Sha
-
Adding harddrives to g4 quicksilver 867
Hi All, I have added a 120 hard drive to the 60 drive in my G4. Is there a way to add more then 1 to it. Adding the additional was easy, the connection was there but not sure if the g4 can handle more than 1 and if so how do I do it. Thanks for you t
-
R.i.p iphone a letter to apple!!!
well where to start. maybe my frustration will come out on this post but i need to vent. here it goes my iphone told me to update so i last night i plug my phone in to itunes and let it do its thing, then after a while i had an error message saying i
-
It's is possible to make a select from a view?
I don't know if it's possible to make a select of a table-view like V_T5F99FW if it's possible does anybody tell me how can I do? Thanks a lot, Regards, Rebeca
-
How to count the total lines of code in Java project in NWDS
Hi, I have created a simple web application in java using NWDS. For audit purposes, I need to know the total lines of java code in this project. We use Netweaver Development Studio (NWDS) to build & deploy the Java applications Is there any tool avai