Can´t find faulty Power Source replacement via Apple Website.

I can´t underestand this.
My iMac G5 20" (RevB) has issues because the power source doesn´t work properly (now not at all). I follow the 'step by step' indications in Apple´s pages that makes me reach that diagnostic (internal diagnostic LED examination, etc).
They clearly suggest then to get a power source replacement. I follow all the steps in the corresponding page (serial number, mac account, etc...) but in the drop-down list of replaceable parts doesn´t appear the Power Source.
Anyone can explain me this? Power source is one of the iMac G5 (Rev B) user replaceable parts, like optical drive, hard disk, etc... but while I can order these I can´t select Power source because it isn´t listed. However, I repeat, they say I can get It in order to solve my problem.
Any ideas?
iMac G5 20" (RevB) Mac OS X (10.4.4)

I have new information for you.
Today I have just called Apple´s Technical Service (in my country) and in fact IT IS POSSIBLE to order a new Power Source for my iMac. They are sending me one now.
But, this is only possible for iMac G5 (RevB) Ambient Light Sensor power sources. Not for RevA or RevC.
However, there´s a flaw in Apple´s pages. It seems they can´t distinguish what Revision of iMac you are dealing with (A-B), I suppose they assume it´s 'A' and so then you can´t get the Power Source.
I want to point this problem because if someone at Apple´s reading this It would be nice to fix that.

Similar Messages

  • Can't find printer drivers on HP or Apple websites for Mavericks

    I have a HP 3050 j610a All-In-One printer that I can not install on my Mac running the latest Mavericks 10.9 OSX.  The HP website sends me to Apple Software Update and Apple says software for this printer is not available (although I found a list of supported printers that includes this printer).  So I am literally stuck in the HP-Apple limboland.  Any ideas anyone?

    Hi,
    Click the Apple icon, select Software Update and select any listed HP or Apple Update, then reboot your Mac and try adding the printer again.
    If the same persists, rey resetting the printing system as following:
    *Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
    Click the Apple menu, and then click System Preferences .
    Select Printers & Scanners.
    Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
    Click OK to confirm the reset.
    Type your user Name and Password .
    Click OK . The printing system resets.
    Now try adding the printer again.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Where can I find some appications' source code  written by swing

    hello, everyone
    I have studied swing for one month, and I have some basic idea of the swing.
    but I want to learn more about the swing. can anybody tell me how can I improve
    myself now or show me where can I find some appications' source code written
    by swing in the internet.
    thank you very much!
    your help is very appreciated!

    Check this tutorial:
    http://java.sun.com/docs/books/tutorial/uiswing/index.html
    It explains all the Swing components with many code samples.
    HTH
    stefan

  • I have an iMac G4 PowerPC with OS 10.5.? The OS10.5.8 update failed. Now get blue screen and error-can't find Intel Power Manager. What now??

    I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and must shut down. Now I get the blue screen. Startup with 'V' pressed shows multiple lines saying: error-can't find IntelCPU Power Manager. What now?? I  reset PRAM, I think.....?????

    I am concerned that you might have applied a system updated intended for an Intel iMac, while you have a PPC (non-Intel) iMac. Your PPC OS should not be looking for an "IntelCPU Power Manager."
    Have you tried booting from the 10.5 install DVD/CD and repairing the hard drive, plus repairing permissions?
    If you done the repairs mentioned above, and your problem still persists, you can also try doing a safe boot. (see http://support.apple.com/kb/HT1455 ) Then, if none of these things worked, if I were in your shoes (it's hard to diagnose these things without being there in person) I would first check that there is adequate disk space, then I would boot from the 10.5 DVD/CD install disk and reinstall the operating system. There is an option to do an archive and install preserving user files/settings, that would be the option you want, as it will save your files but install a new OS. Make sure you have a good backup of your files first. If you do not have one, use "target mode" to copy all your files before embarking on an new OS install. Assuming that you do succeed with this install, then use Software Update to get the right updates for your iMac.

  • TS1367 I have a new iMac and can't get it to turn? Can't find a power button?

    Have new iMac and it won't start up. Can't find a power button?

    Try to perform a HARD RESET on the printer first. Unplug the power cord from the printer, and leave it out for 30 seconds. Plug it back in, see if it aligns and finishes the job.
    After alignment, try to print a test page from the printer or make a copy. This job is to make sure that the HARDWARE of the printer is working correctly.
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Where can i find a Power Adapter for the IdeaPad A2109?

    How are you?
    Looking for another Power adapter for the A2109....
    Havnt found the original in eBay...
    Is anyone knows where can i find the Power adapter?
    If not the original - is there any generic alternative that in good  quality?
    Any details? please feel free to provide!
    Thanks a lot!!!
    Solved!
    Go to Solution.

    b.t.w: charging is only by the USB port, am i right?
    One of these could suite?
    http://www.ebay.com/itm/New-Ariic-5V-2A-2000mA-AC-DC-USB-OUTPUT-Wall-Charger-for-Tablet-PC-Cell-Phon...
    http://www.ebay.com/itm/5V-DC-2000mA-USB-Wall-Home-Charger-Adapter-Supply-MP3-MP4-EU-Plug-High-Quali...
    http://www.ebay.com/itm/5V-1-5A-7-5W-EU-Wall-Mount-USB-Power-Adapter-Travel-Charger-Mobile-GPS-MP4-u...
    http://www.aliexpress.com/item/Ainol-years-novo7-Ares-charger-5v-1-5a-usb-original-adapter/693452820...
    http://www.aliexpress.com/item/For-UZONE-F6-advanced-WISE-Tablet-PC-5V-2A-USB-Plug-Power-Supply-Adap...
    Is it right that a lower ampere in the adapter = better battery life? 
    Thanks for all of your help!

  • Blurb Book in Lightroom 5 on my Mac disappeared after 3 days of work. Where can I find a backed up copy via Time Machine or anywhere else?

    Blurb Book in Lightroom 5 on my Mac disappeared after 3 days of work. Where can I find a backed up copy via Time Machine or anywhere else?

     
    Welcome to the WD Community.
    1) I assume I can  just hook the unit up via USB to my Mac and use iPartiion to reformat the drives, assuming each of the 4T drives will be seen by iPartition as a separate drive. That much seems straighforward.
    Yes, and in case you ipartition dont see the unit properly, you can use the disk utilities on your Mac and you will be able to reformat the unit to make it compatible with your system.
    2) Is my next step to reinstall the WD software and how do I do that? I've downloaded the Drive Utilities and Securities install apps - I assume I just run these with the drive still connected and that's all I need to do?
    Yes, just run the applications.
    3) What about the firmware update for Mac - when should I run that??
    Normally, firmware updates are released to fix any issues that you might encounter on the drive. the latest one was released on 9/24/2014 and it fixed an issue with the drive dropping off of the list after system wakes up from standby mode. 
    5) And what about the "My Book Live Duo Setup" app for Mac - is that for a completely different model? What's the difference between "My Book Live Duo" and "My Book Duo"? It's these little things that I find so confusing. 
    Those are different units. The MBL Duo is a NAS (Network attached system) and the My Book Duo is a DAS (Direct attached system)
    6) Lastly, when I have all the software installed, is that when I follow the procedure described in the Knowledge Base article ID 5724, "How to install a My Book Live or My Book Live Duo on Windows (8, 7, Vista, or XP) or Mac OSX for the first time"? Or is that procedure only for "My Book Live Duo" but not for "My Book Duo"?? 
    That procedure is for the network units, not for your drive.
     

  • Where is the on button - husband gone and it is usually woken up by hitting a key.  I can't find the power button.  Help!

    Help!  I can't find the power button on my husband's I Mac!  Why is this so difficult?

    Reach around to the back, lower left corner. You'll feel the button there.

  • Can't Find the Data source 0GLACCEXT_T011_HIER

    Hi,
    i am working with B I 7.0, ECC 6.0.
    Trying to Implement Balance Sheet for New General Ledger Account.
    I can't Find the Data source for the Hierarchy 0GLACCEXT_T011_HIER
    But Info object 0GLACCEXT is available and
    i find the Infosource 0GLACCEXT ,but this is 3.5 version.
    I check some SAP notes
    663945 -- Transfer Rules for 0GLACCEXT Info object
    <b>but My B I Content is 703</b>
    Do I need to follow this SAP note ?
    I had check this Link Too, but I uable to solve my problem
    Re: 0GLACCEXT vs 0GL_ACCOUNT - How it is USED?
    any Idea
    Thanks
    Prasanna

    Pam,
    BI 7 does not support hierarchy datasources. For implementing hierarchies (BI 7), you have to use BW 3.X infosources/transfer rules.
    Hope that helps.
    Thanks

  • Can't find the power switch on the Zen V P

    I can't find the power switch on my 2GB Zen V Plus. The manual says it's right below the lock switch but I don't see anything below it. Am I totally missing something?Thanks

    Hi Cat,?A complaint I have about the Zen V plus is the small size of the buttons. They are a bit too close together and too small. It's a little difficult to do things like push the middle toggle?back and forth or?push it down without hitting the other buttons or toggling too much. My ipod is a lot easier to navigate. Phil

  • HT4095 I downloaded a rented movie in hd to my ipad2 but can't find it to pay through my apple tv now. How do I watch the movie?

    I downloaded a rented movie in hd to my ipad2 but can't find it to pay through my apple tv now. How do I watch the movie?

    Rented movies downloaded to an iOS device cannot be transferred to any other computer or iOS device. Are you sure that a rented movie, downloaded to an iPad, can be airstreamed to an Apple TV?

  • I'm trying to find out why my phone isn't here yet, 30+days, and I can't find a single contact number on this website. Why do I have to sign up with this stupid forum? I have better things to do, like find a new carrier!!

    I'm trying to find out why my phone isn't here yet, 30+days, and I can't find a single contact number on this website. Why do I have to sign up with this stupid forum? I have better things to do, like find a new carrier!!

    800-922-0204 option 4, say agent, ask.

  • TS1741 Can I still play movies or songs via Apple TV with my Mac shutdown & turned off?

    Can I still play movies or songs via Apple TV with my Mac shutdown &amp; turned off?

    Hey mate na that wont work as much as we would love that but apple tv needs the computer on to see it on the network :) i hope i helped mate :)

  • IPad Mini is stolen. Can I register this as stolen on the Apple website so that the scum who stole it can't use it

    iPad Mini is stolen. Can I register this as stolen on the Apple website so that the scum who stole it can't use it. Or atleast when they try and register it, I know about it?

    Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    iCloud: Locate your device on a map
    http://support.apple.com/kb/PH2698
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    iCloud: Locate your device on a map
    http://support.apple.com/kb/PH2698
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    http://support.apple.com/kb/HT4061
     Cheers, Tom

  • Where can I find a power charger for my G3 ibook

    Just broke my 4 year old g3 iBook power charger by walking into the cord and snapping it off at the power source. Where can I find a replacement power cord charger for this 750pc G3 iBook?

    There are third party choices for an adapter, also:
    MCE Technologies
    http://www.madsonline.com/index.html?
    MacAlly adapter at Amazon.com
    Micro Accessories adapter at Other World Computing
    Apple's is the only one with the glowing ring to indicate charging status, though, and can be found here:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M89 43LL/A
    I believe the one from Other World Computing is one of the sturdiest of the lot. The MacAlly adapter's cord is a bit flimsier than the one from Other World Computing, but both are working fine on our iBooks. We haven't tried the pricier ones.
    If you have further questions about your iBook G3 (Dual USB), you may want to try posting in the iBook G3 (Dual USB) Forum.
    You have posted in the iBook G4 Forum.

Maybe you are looking for