Can't find files on Time Capsule

Early 2008 2.4 GHz iMac running 10.7.5
Time Capsule with 699 GB available (connected via Ethernet cable)
When I bought my Time Capsule I added all of my pre-Time Machine backups to it in a separate folder. This worked fine for several years. Time Machine backed everything up and if I need an older file I went into the folder I made of previous backups. Now, when I access Time Capsule I only see the Time Machine backups. The folder of previous backups isn't there. There's still tons of space on it so I can't imagine anything was overwritten. Also, the Time Capusle never shows up like other external hard drives or devices - only as a shared device. Not sure if that has something to do with it. I can't tell when this started. It's been a while so there were a couple of OS updates in there. At this point, I just want to get my really old files off of it and move them to another hard drive. Thanks in advance for your help.

Early 2008 2.4 GHz iMac running 10.7.5
Time Capsule with 699 GB available (connected via Ethernet cable)
When I bought my Time Capsule I added all of my pre-Time Machine backups to it in a separate folder. This worked fine for several years. Time Machine backed everything up and if I need an older file I went into the folder I made of previous backups. Now, when I access Time Capsule I only see the Time Machine backups. The folder of previous backups isn't there. There's still tons of space on it so I can't imagine anything was overwritten. Also, the Time Capusle never shows up like other external hard drives or devices - only as a shared device. Not sure if that has something to do with it. I can't tell when this started. It's been a while so there were a couple of OS updates in there. At this point, I just want to get my really old files off of it and move them to another hard drive. Thanks in advance for your help.

Similar Messages

  • HT201250 What if Time Machine can't find my airport time capsule?

    I can't find my airport time capsule on my computer... I need help in order to reach documents saved on my airport time capsule used as an external hard drive... Please help!

    Is it listed in the sidebar of a Finder window, under SHARED?

  • Can't copy files to time capsule

    I need some help with my new 2TB Time Capsule.  I setup the time capsule and did my first time machine backup.  Now I want to copy over additional files to time capsule from my full hard drive on my iMac. When I drag files over the following message occurs "The item “FILE NAME” can’t be moved because “Time Capsule” can’t be modified."
    I went into my aiport utilities -- opened up my time capsule -- went to disks -- clicked file sharing -- and the enabled file sharing box is checked.
    Help! How do I move files to my time capsule.
    Thanks in advance

    From post above: "Now I want to copy over additional files to time capsule from my full hard drive on my iMac"
    I'm sorry for the confusion.  My device is called "Time Capsule" --- How do I remedy the error I am receiving?
    "The item “FILE NAME” can’t be moved because “Time Capsule” can’t be modified."
    This error occurs when I am drag a document from my iMac hard drive to my time capsule (which technically has another name).

  • Can't access files in Time Capsule in WIN7 64 Bit- says folder is empty

    Hi there. I can't seem to access my files in Time Capsule using WIN7 64 BIT, it works fine as a router , i can see the time capsule online and how much space it's occupied, however whenever i click on it , it says folder it empty. I can access the files from OSX 10.6 (Snow Leopard).
    I tried to drag and drop new files into the Time Capsule in WIN7 , it copies/paste the files fine for a second and then disappear, and if i go back to the Snow Leopard i can see those folders again , so i am guessing i need enable some kind access/ file sharing option or whatever that allows the files to be visible. Has anyone faced this situation in WIN7 64 BIT ?
    Thanks

    http://www.nullriver.com/products go download Connect360 gives your Mac the ability to share through Xbox360.

  • Can't Find Pictures in Time Capsule

    OK, I'm a little stumped here. When I open Time Capsule, the "Search For" section is grayed out so I can't press "all images" and when I open my home folder and press pictures, only the iPhoto icon comes up. If I click on it, it's just the icon. WHere are my pictures being backed up to? This is one of the sole reasons I got time capsule.

    If you use iPhoto then it’s the iPhoto Library that is backed up, and the correct way to restore is via the File -> Show back ups option or simply to restore the entire iPhoto Library.
    That said, you can access the actual photo files in the back ups by right clicking on the iPhoto Library and going ‘Show Package Contents’.
    Standard warning
    Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    Regards
    TD

  • Spotlight does not find files on Time Capsule disk

    I have the 2TB time capsule configured with a DATA and FIL disks.  The DATA is used for the Time Machine backups.  The FIL disk is used as a NAS (Network Access Storage) disk.  The FIL disk works as advertised except Spotlight.  When I mount the FIL as a shared disk and go into Spotlight and seach for a file by the filename, nothing happens.  I spent hours on this.  I seached Google and found nothing.  I also tried mounting the disk as a SMB.  This works partially when I alter the search criteria to seach only "Shared".  But it only works within the folder.  It does not search the entire tree.  Any suggestions will be greatly appreciated.  Thanks

    By default, network drive is not indexed.
    See here for the default list of folders that Spotlight will search:
    http://docs.info.apple.com/article.html?artnum=301533
    You can manually turn on spotlight on a specific volume by using Terminal and enter:
    sudo mdutil -i on /Volumes/X
    (where "X" is the name of the network volume.)
    If the index is corrupted, and you want to rebuild it, enter:
    sudo mdutil -E /Volumes/X

  • Can't delete files on Time Capsule

    I manually created a folder on my Time Capsule called "manual backups" and dragged some folders/files there. (They were dragged over from an external drive, which had files I put on there from my mac. Not using a pc.) A few weeks later I went to delete the folder and I get "The operation can't be completed because you don't have permission to access some of the items." I am logged in as myself, the admin. How can I delete these files?

    Select the files and fix their permissions.. so you have the ability to delete them..
    If you do happen to have a pc on the network.. try deletion from Windows Explorer as sometimes it is a lot easier as windows tends to ignore file permissions.
    What OS is actually on the computer??
    There are a couple of sneaky methods.. like create a folder of the same name as the folder you are trying to delete.. it seems to be able to create an empty folder over a live one.
    No luck with anything then you will need to do it from terminal .. but I think you should tell us exactly what OS you are running first.

  • Upgraded to Mavericks, can't find files on time machine

    I have an external hard drive where I backup my Macbook Pro.  I recently upgraded to Mavericks and now I can't find old files on time machine.  I am looking for a file around a certain date, but no matter what date I look at in time machine - the files and data seem to be the same.  I hope someone has a solution to my problem!

    Hi Miax1,
    Welcome to the Apple Support Communities!
    I understand that you are looking for a specific file in your Time Machine backup. It sounds like you are familiar with the interface but just cannot find the file. Just to make sure you are searching in the right area, I suggest reviewing the Restoring data from Time Machine backups section from the following article. Please let me know if you need further assistance.
    Mac Basics: Time Machine backs up your Mac
    http://support.apple.com/kb/ht1427
    Restoring specific files or folders
    Choose Enter Time Machine from the Time Machine menu. The restore interface appears. You can literally see your windows as they appeared "back in time."
    You can use the timeline on the right side of the window to reach a certain point back in time. The timeline shows the times of all backups on your backup drive. If you don’t know exactly when you deleted or changed a file, you can use the back arrow to let Time Machine automatically travel through time to show you when that folder last changed.
    Note: Dates in pink indicate the data resides on your Time Machine backup device. Dates in white indicate the data resides on your Mac. In OS X Lion v10.7 and later, portable Macs include local snapshots.
    You can also perform a Spotlight search from the Finder. Simply enter a search term in the Spotlight search field, and use the back arrow to have Time Machine search through your backups to find what you are looking for.
    Before you restore a file, you can also use Quick Look to preview a file to make sure its the one you want. Highlight the file and press the Space Bar to bring up a quick look.
    To restore, select the file/folder and click the "Restore" button. The file will automatically be copied to the desktop or appropriate folder.  If the file you are restoring has another file in the same location with the same name, you will be prompted to choose which file to keep or keep both.
    I hope this helps,   
    -Joe

  • Can Not Unlock Files on Time Capsule

    When replacing an external disk drive, I copied over 180 G of mp3 files from an external drive to my Time Capsule into a data folder (not backed up with time machine). After coping them to a new external drive I attempted to delete the files on the Time Capsule only to discover they are all Locked and can not be deleted. When I try to change unlock under "get info" as an admin, it will not unlock. I've read I can sudo chflags for a single file, but I have over 45,000 files. What is the better way?

    +Can I reset the drive and erase everything? I can't see the TC in Disk Utility.+
    Are you saying you want to erase the drive on the TC? You don't do that with Disk Utility, you use AirPort Utility.
    Airport Utility - Manual Setup
    Click the Disks icon in the row of icons
    Click the Disks tab below the icons
    Click Erase
    The Quick Erase will only take few minutes. Zero Out will take several hours or more depending on how much data you have on the drive.
    And, it goes without saying that you should check to make sure that you don't need the files on the TC as everything will be erased.
    Post back if you need to reset the TC back to factory defaults. This won't erase the drive, but it will clear any configuration settings and set them back to defaults.

  • Can's access files from time capsule

    I have a 2TB Time Capsule that is about 2 months old.  The wifi works however, when I go to access the files on the drive, the time capsule boots itself off of the network.  I use the time capsule to store my musics, movies, and pictures on.  Only a couple of gigs of space is being used.  I've done a soft reboot on the time capsule and on the ATT uverse box that it is bridged through.  Problem still persist.  Issue is happening on my macbook pro and windows laptop.  Machines can see the drive, back either the files or empty or time capsule goes off line.  Any thoughts. 

    Yes, unless it's been deleted from the Time Capsule, which may happen when it runs out of space. Don't use the backup as a storage place for files you intentionally delete from the computer; it's designed for recovery of accidentally deleted content, and if desired, for use with the Migration Assistant when setting up a new Mac.
    (56666)

  • Can't migrate files from time capsule, resource temporarily unavailable

    My old iMac 20" Intel late 2006 crashed. It got slower and froze as well as lines across, so I thought it's the graphic card. At the same time the SOPHOS Anti virous detected malware and trojan on my computer which was removed manually.
    Unfortunately with the 20" late 2006 model the card cannot be replaced. Ran hardware test and did not indicate any hardware issues. Finally could not boot from the disc. When I turned on the machine, I could hear fans running and some other noice but only black screen. We back up our computers every hour onto a time capsule.
    I purchased a new iMac 21.5 " and thought it will be easy to migrate everything from the time capsule. I done it in the past when I had to replace the hard drive on the old iMac 2 years ago.
    Unfortunately when I try to access the time capsule, I received the message of data damaged and now resource temporarily unavailable. How can I retrieve my data? Any suggestions are greatly appreciated.

    You will be in deep trouble if the TM backup is corrupt..
    Run the verify disk on the sparsebundle.. Pondini has some instructions here.
    http://pondini.org/TM/Troubleshooting.html
    Look at A5
    Also there are manual methods of getting as much as possible from the backup if it is not corrupted too badly..
    Look at http://pondini.org/TM/FAQ.html
    He gives several methods to restore files.. read Q14-17.

  • Can't access file on Time Capsule hard drive after mavericks.

    I uploaded some files onto my time machine, after OSX Mavericks; i can see the files but cant open them.Any suggestions as to how i go about it?

    What kind of files you want to open.
    chick if there is a software support opening these files.

  • Can't drag files to Time Capsule

    I just set up my Time Capsule.  It is connected wirelessly to my iMac. I am trying to drag files from my iMac to the time capsule. I get the message, "Modifying ' name of time capsule' requires an administrator name and password. To move 'file name', click Authenticate".  But there is no authenticate button.  What should I do to enable dragging files to the TC?

    Are you transferring files WD plugged in by USB to the TC?
    If so the process is WD--USB--TC--network--Computer--network--TC--InternalTCdrive.
    If you are using wireless it is much much worse.. Because every packet is copied to the computer then back again.
    If you have the USB drive plugged into the computer.. (this is far superior).
    WD--USB--Computer--network--TC--internaldisk.
    But the TC must be connected by ethernet to the main router.. if you have it connected by wireless then it is much worse again.
    Ethernet and all ethernet with wireless turned right off is the only way.. and the USB drive plugged directly in to the computer.

  • Can I Retrieve Files From Time Capsule?

    I had a MacBook Pro that was fully backed up to a Time Capsule. The laptop was stolen last week. I have some files (photos I wanted to use for holiday cards) I wanted to retrieve while I save up some money to buy a new MacBook. I have two powerbooks and was wondering if it is possible to connect them to Time Capsule to access those other files. They are 10.4 and don't have Time Machine. I suppose I could connect computer to Time Capsule using a USB cable and it would act like any other external hard drive?

    Ok. I just upgraded one of the powerbooks to Leopard. But still no luck accessing individual files... Migration assistant will transfer accounts. All I'm looking to do right now is transfer a few documents, photos, etc. Help!

  • Can't Find File in Time Machine

    Kind of a weird problem, usually I can figure this stuff out on my own.
    Basically, I have an edited version of a video and I want to retrieve the original.  I know I did the edit on that day and I know its date created.  I have a weekly backup from that week and the week after.  In the one for that week, neither the original nor the edit are present so I assume the end of that week was right before I moved the video onto my computer.  The next backup has the editied version, but the original is nowhere to be found, so I'm assuming that I can't get at in any way, so basically my question is.
    1. Does Time Machine back up the trash anywhere?  The .trash file isn't in my ~/ so I'm assuming it doesn't, and the file might have been in the trash.
    2. How does Time Machine compress the backups into weekly files?  Is it possible that something that only existed on my hard drive for a very short period of time got "dropped" in the combining process?  Or did I somehow manage to get it onto my computer and delete it between backups?

    1. Does Time Machine back up the trash anywhere? 
    No, that's one of the things it skips automatically.  See What's excluded from backups in #11 of Time Machine - Frequently Asked Questions.
    2. How does Time Machine compress the backups into weekly files?
    It doesn't, exactly.  It simply deletes the backups that have "expired."  That leaves a "snapshot" of how your entire Mac looked at the time of each remaining backup.
    Is it possible that something that only existed on my hard drive for a very short period of time got "dropped" in the combining process?  Or did I somehow manage to get it onto my computer and delete it between backups?
    Yes, it's quite possible.  It depends on the timing and how often backups are run, but basically Time Machine keeps all backups for 24 hours, except the first of the day, which is kept for  a month.  After a month, it keeps one per week.

Maybe you are looking for

  • Send Blob Contents to Client machine as Attachment

    I am able to see the blob contents in the client window but the file does not show as attachment which is my main purpose-- to give the user the option either to open the file or to save the file on his machine. I am also setting the setHeader as att

  • Reordening table columns

    I found a document (1085012.1) on metalink that show how to reorder columns and rows in a table to improve the performance. There is a script to identify the "Out of order ratio %". I have identified a table that has 66.8%, I have followed the instru

  • I want to place the file in the given path

    hi, I have one doubt on data transferring. I have got the path where i have to place the text file. I have written the coding OPEN dataset and transfer data set. But the file is not not replacing in the path. But i have tried to retrieve data from th

  • Deployment of Windows 8 and Microsoft account

    Hi, I have a situation where I am deploying Windows 8.1 to desktops connected to a 2008 R2 domain Scenario: * Each client PC is running Windows 8.1 * Each client PC signs on to internal domain controller ([email protected]) * Each user account has an

  • Thunderbolt update is coming back

    I'm not sure if this is a problem but my Thunderbolt update is coming back and asking for update again. I did it twice the last weeks and yesterady its back in my App Store. Is it right?