Can't find font already installed in System.

OS: Windows 7
Adobe Acrobat 9 Pro
I'm creating a new form and I can't choose a specific font (already installed on the system) for a text field; the font I need to use is "Gotham-Book" (placed under the Gotham family in the font library in the Windows Fonts folder), when displaying the available fonts in the Appearance tab on the Text Field Properties, the only "Gotham-type" fonts displayed are "Gotham" and "Gotham Italic" as shown below:
Also important, when using the TouchUp Text tool, the dialog box DOES let me choose all the installed fonts on the system, including the "Gotham-Book" font that I need for the text field:
My question is, why does Acrobat can't work with the same font library in all of it's actions?

Here is what I see on mine. Do you not see this? You can't see it while actively editing text.
Pattie

Similar Messages

HT3986 After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system

After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system.
I donot think I have a install disk when I bought my mac, there is only a disc partition for recovery system.

Welcome to the Apple Support Communities
You have to install Boot Camp drivers. On Mountain Lion, you have to download them.
First, press X key while your Mac is starting to start into OS X. Then, open Boot Camp Assistant and select the option to download the drivers. You will have to burn them into a DVD or USB drive, so after downloading them, restart and install them into Windows

Indesign CS 5.5 can't find fonts (..from User Folder, OSX 10.6.8)

Hello there,
Indesign CS5 can't find any font that is located in my User folder. (MacintoshHD > User > library > fonts).
The problem is only in OSX 10.6.x and CS 5.
Also installed CS3 has no problems to find the already installed fonts.
And on a second Hardrive I've also System 10.5.x. INDESIGN both Versions have no problems to find the fonts in that system.
Only the Combination from CS5 and OSX 10.6.x has that problem.
Some Tricks already posted here, for example to put the missing fonts in the main structure (MacintoshHD > library > fonts) works,
also if creating a special »Document Fonts« file in the same folder, whre the problem documents are located.
BUT: This is all just a temporary solution. It doesn't solve the main problem.
Maybe it's, because the 10.6.x ist a upgrade from a 10.5.x TimeMashine Backup with the CreativeSuite already installed.
So maybe I should install all the CS5 stuff new?
Or is it a problem with the Login Structure? I'm the only person working on my machine. So I'm logged with full Name and as »admin«.
My User-Folder with my special preferences and fonts is named with another name (my nickname).
I'm not such a Computerfreak…and don't know if that does means anything. No problems at all with that since years.
Thanks for any good idea
camino
Message was edited by: camino07 Hi, Now, I've uninstalled CS5, delete fontcaches, restart computer an install CS5 complete again.
But it's still the same. CS5 can't find the fonts. One special thing I have to add: One font, placed in the »Users > fontfolder, it finds the »regular « font style but not the »bold«.
It's an »TT« font suitcase. (EngraversOldEnglish).
Any ideas?

Hi,
I added here my spotlight results. Shell I really delete all the stuff?
Seems, that are different sources, like fonts and some other stuff…
thanks
http://www.pikant-media.de/download/Fnt_Screen.jpg

Distiller "can't find font" error with MS-Gothic and ArialUnicodeMS

Hi. I'm tried to verify that Distiller (both 9 and XI) and PDF Generator (11.0 SP1) are able to generate PDFs from Postscript files using a variety of fonts. Almost every font that I tried works perfectly fine, but MS-Gothic and ArialUnicodeMS both fail with "can't find font" errors. I've verified font configurations in both Distiller and PDF Generator, and lots of other fonts work fine. I've also verified that the two fonts are installed, enabled, and can be used in other applications (e.g., MS Word). In fact, I can generate PDFs from MS Word documents on the same server that use both of those fonts. I suspect the errors are misleading in that those apps can find the fonts, but are unable to open or use them for some reason. I've been able to replicate this behavior both on Windows Server and Mac OS X.
Has anyone seen behavior like this? Any suggestions on how to get more information out of these Adobe apps to get a better idea what the real error is?
JJR

Addirional note: This is a java class within a JavaFX application if that is relevant.
It does seem to be relevant - if I create the same class as part of a Java application rether than a JavaFX application it compiles without error. Is the imported java.awt.GraphicsEnvironment different in the tow cases??
Edited by: Sidereal on Aug 28, 2009 11:19 AM

How do I install OS 10.7 NOT 10.7.5 on a mac running Snow Leopard 6.8 i.e. where can I find the original install app for Lion OS 10.7.0?

I'm running 10.6.8 Snow Leopard fine on my MacPro1,1, Dual-Core Intel Xeon, 2.66 GHz Mac, but I need to install Lion 10.7.0 to run a program I need.How do I install OS 10.7 NOT 10.7.5, because I get this message when I try to install 10.7.5, which I've downloaded:"This update requires Mac OS X version 10.7." on a mac running Snow Leopard 10.6.8, So i need to install the original 10.7.0 over the 10.6.8 i.e. where can I find the original install app for Lion OS 10.7.0? The original Lion 10.7. is not avaialable for purchase from the App store or anywhere, even C-Net . Where can I find it to purchase?
Also it seems I cannot install Mountain Lion over 10.6.8 as advertised. When I go to purchase I get this message: "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I think my computer can handle it (specs above) Are there any workarounds to this?

If you're getting a "This update requires Mac OS X version 10.7" message, than you have the updater and not the full installer. Go to your Purchases section of the Mac App Store and you should see the full version there. But it may be 10.7.5, though in my system is shows as being from 2011 which would appear to be the original version.
As to Mountain Lion, that's supported only on the Early 2008 Mac Pro or newer.
Regards.

Can't find my newly installed Windows Installer 4.5

022614: Windows XP,
I've installed the newest version of Windows Installer several times and I can't find it anywhere on my system. It is not listed as a program and it is not listed in the Control Panel Add/Remove list.
How am I supposed to find out if my installation actually exists? I want to install an older version of Java (currently have 7u51) so that I can play the Text Twist game on Excite Games. The older version demands that I have Windows Installer on my system
before it can complete the installation. So I go find Windows Installer 4.5 and have tried several times to install it, but I can't find any proof that the installation actually completed.
I expected to see the Windows Installer 4.5 in the Control Panel, but it's not there. I do, however, have the latest version of Windows Installer Clean UP, as well as Windows Fix It.
Any help on this would be HUGELY appreciated.
dmh

Thenk yew veddy mutch! I did run the msiexec.exe and it opened a Windows Installer window with a bunch of instructions about options and parameters that can be used. Here's a little capture of what was shown in the window:
Windows ® Installer. V 4.5.6001.22159
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Now I assume that this window is showing me that I "have" installed Windows Installer v4.5.6xxxxxx.xxxxx. I'm a little surprised that it doesn't list itself in the Control Panel.
I did go to the long link you provided and discovered that during my searches I had actually sifted through that forum (up to 18 pages, then I quit as I couldn't find any postings or threads regarding how you verify that you have, indeed, installed WI 4.5).
That was another surprising thing about the Windows Installer installation steps - the last step DID NOT verify that the installation was completed and everything was working properly.
So I'm very grateful that you gave me extremely useful information and now I'm off to try to install Java 6, 32-bit. Hopefully my WI4.5 installation will behave beautifully and I'll again be able to go into "brain dead" mode while I play Test Twist up to
100,000 just before I go to bed :)
dmh

A movie isn't listed under my purchases. How can I find it to install on iPad?

A movie isn't listed under my purchases or in my library, but it is on my laptop. How can I find it to install on my iPad?

that's not compatibile.
from Adobe - Adobe Photoshop Lightroom 2 : System requirements
Mac OS x
PowerPC® G4 or G5 or Intel based processor
Mac OS X v10.4, 10.5 or 10.6
1GB of RAM
1GB of available hard-disk space
1,024x768 display
CD-ROM drive

Where can I find the quick install package for EBS extensions for Endeca?

I want to install EBS extension for Oracle Endeca 12.1.3.4.
Where can I find the quick install package in the edelivery.oracle.com site? Which Product Pack should I select in the site?

If you're getting a "This update requires Mac OS X version 10.7" message, than you have the updater and not the full installer. Go to your Purchases section of the Mac App Store and you should see the full version there. But it may be 10.7.5, though in my system is shows as being from 2011 which would appear to be the original version.
As to Mountain Lion, that's supported only on the Early 2008 Mac Pro or newer.
Regards.

Error - "Can not find Microsoft Word installed.."

Hi,
I downloaded RH6 demo to test it, but can't generate a
printed documentation.
When I try, I only get an error message
"Can not find Microsoft Word installed on your system"
I have no idea why this happens. First, in the layout
settings I have set .pdf to be produced - DOC option is not
checked.
Also, MS Word is installed (Office 2003), and in Tools /
Options / HTML Editors Word 2003 is listed, with a correct path to
Winword.exe (which I reselected, just in case) .
This happens on Windows Vista Ultimate edition, UAC off.
Other layouts are generated normally.
Any idea how to fix it?
Thanks

RH6 is not supported under Vista.
I cover this in the article I wrote for Adobe's DevNet pages.
http://www.adobe.com/devnet/robohelp/articles/get_started.html
It is also covered in the Getting Started Guide that ships
with the product. A soft copy can be found at
http://www.adobe.com/support/robohelp/documentation.html
See also Snippets on my site where there is a reference to a
forum post about running RH6 under Vista.
When you installed RH6 did it find Word on your system then?
Did you install using your logon with admin rights attached?

Where can i find my mavericks install file, i can not find it in my program map, what shall i do if the file has being erased?

Where can i find my mavericks install file, i can not find it in my program map, what shall i do if the file has being erased?

If you download it again, you can make a bootable USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X

Where can I find Picture ID in SAP system..?

Hi All,
Where can I find Picture ID in SAP system?
I want to display my company logo on ALV Grid top of page. I am using object oriented ALV to implement this. cl_dd_document is the class and add_picture method with exporting parameter picture_id.
What ID should I pass into this PICTURE_ID?
add_picture exporting picture_id = '????'.
I tried 'ENJOYSAP_LOGO' and it's working fine. I got this logo from one of SDN wiki.. Not sure where to
I am not authorized to OAER transaction.
Thanks,
Naveen Inuganti

Hi Naveen,
you need OAER transaction.
Try SE37 C160_TRANSACTION_CALL with OAER
Regards,
Clemens

How can we find workflow templates activated ina system ?

how can we find workflow templates activated ina system ?
Could you please tell me a table name for that ?
thanks

Hello ,
I need the active workflow templates regardless of business object,event or template etc
So I used method suggested by Mohammad Anwar and checked the table HRS1205
Here I find a long list of active workflow templates
But further to that I need to find which workflows have been activated and implemented to meet business requirement and put to use in the system.
For this I checked the SWI1 in production system to get an idea of what all workflows are active.This will give day to day data.
But if I need to find the same in HRS1205 table then can I consider those entries of active workflows for which UNAME field is not standard SAP userID but a dialog user ID of any user ?
thank you

I can no longer hold down a key and get the character to repeat as say, aaaaa. Instead I get a menu of accented a's, such as àáâäæãåā. I can't find any thing in the System Preferences that allows my to turn this function off

I can no longer hold down a key and get the character to repeat as say, aaaaa. Instead I get a menu of accented a's, such as àáâäæãåā. I can't find any thing in the System Preferences that allows my to turn this function off.

Back up all data before proceeding.
Please triple-click anywhere in the line below on this page to select it:
defaults write -g ApplePressAndHoldEnabled NO
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Log out or restart the computer.

Linux Installation- I can't find the required install script

I'm trying to follow the LabVIEW installation guide for Linux, but I am having trouble. This post will be kind of long, as I will try to tell you everything I have done so far. I'm also kind of new to Linux, so I'm sure there are many things I don't know.
I'm trying to use http://www.ni.com/pdf/manuals/374718a.html#installing
and http://www.ni.com/pdf/manuals/375845d.pdf
Step one from the guide is to insert the "installation media" and run
#sh ./INSTALL
and that's easy enough. Or at least it would be if I had any idea where this sh file is. I requested a copy of the install disks from my university (I'm installing on one of their computers), and they said that while they don't have any Linux install disks, they were pretty sure "it is on there somewhere," whatever that means. That seems to be about the extent of their knowledge regarding linux.
On this disk is a folder named slcp10 with contents slcp10.cab, slcp10.mis, and slcp200_mft.cab, all of which are windows files and as far as I can tell impossible to run on linux unless I'm using WINE, which is clearly not the way to go.
I also have a few ISOs from the site licensing department, but likewise no one seems to know anything about installing on linux. After mounting these ISOs I see that they contain the folders Bin, Common, Distributions, Licenses, and Readme (which is full of all kinds of irrelevant stuff). They also contain the files academicsitelicense.html, asladminresource.html, autorun.exe, autorun.inf, nisuite.xml, patents.txt, readme_core.html, setup.ede, and suite_md5_1.xml, none of which seem promising. Again, I only know how to install .exe files using WINE.
I've since turned to the internet to try and download it from NI directly, and have gone to http://www.ni.com/download-labview/ and selected "Already own LabVIEW? Download the latest version." From there I select the dropdown for alternative OS, and select the MAC OSX option as I read somewhere on the NI help pages that this would work on a linux machine (which makes sense to me, as MAC is UNIX-based, right?). Well, that gives me a dmg file (apparently some sort of mac file?) which I found a way to use on linux by extracting it in 7zip and then mounting the hfs file. This still seems to be some sort of evaluation program, as it contains LabVIEW2014Evaluation.pkg, readme.html (which takes me to the OSX install readme-useless), installation_guide.pdf (again, solely for MAC and useless to me), drivers.webloc, and the folders Extras and Licenses.
I'm at wit's end, man. I feel like I'm taking crazy pills. I've never had so much trouble installing a program before in my life, because technically I haven't even started the installation process yet, and I'm already about to defenestrate my computer. Please help me. I don't know what else to do, and I'm sure there is a very simple solution that I'm too ignorant to see.
At our other lab we run windows, and installing is cake. After learning Linux over the past few months, I never thought I'd say this, but I actually wish I had a windows machine right now.
Solved!
Go to Solution.

Well, I managed to get it installed, but only because I found another ISO from the site licensing department that had linux install files. Oddly enough, this single ISO is a scant 3 Gb while there are three other ISOs that each come in at 7.5 Gb. Are there really that many missing packages in Linux?
Sorry if anyone reading this has similar issues, but the best I can do is say find the Linux install disk.

Playlists can't find musc already in iTunes Music folder

I've seen this question is many forms but can't find the answer. Here goes:
I rebuilt my Vista system and then restored my iTunes files and music. I also installed the latest iTunes version. Within iTunes I see all my songs, playlists, ratings, etc...
However, each entry has an "!" to the far left and when I try to play it I get a message that says "The song XXX could not be used because the original fine could not be found. Would you like to locate it?" If I say yes, I can go to the iTunes Music folder, find the file, and then it will work.
However this is not a viable solution for 4,341 files. My music is stored on a separate internal D: drive witch looks like D:\iTunes Music\artist name\album name\file name. It has been this way for a couple of years. The reinstalled iTunes application and related files all all in their default locations. Only the location of the music files is different than the default, but not different from when it was working just before the system rebuild.
If you go to the iTunes menu for Edit - Preferences - Advanced - General tab - "iTunes music folder location I have it set to D:\iTunes Music, just as it was before I did the system rebuild.
With these settings and folder/file structure it won't "find" any of my music. There has to be a way!! Please help!!
BTW, all music was originally imported by either (1) ripping from original CDs with "keep iTunes Music folder organized" or directly from the iTunes store.
I need to get my songs to play "without:" moving the songs or losing the playlists, information, ratings, etc. Help, there has to be a way. I just can't take the weeks or months necessary to recreate this.
Many thanks,
John

hexonxonx,
Thanks for responding to my question. I'm trying to troubleshoot an audiobook that won't download from the iTunes store. It's part one of a two part audiobook. The second part downloaded properly, along with three other audiobooks.
iTunes support has given me two sets of instructions, neither which I can carry out.
The first set is to empty the Downloads folder and then empty the trash, and the second set to to empty the cache folder. Unfortunately, I can't find either folder. I also cannot find a folder labeled with the name of the audiobook that is hung up. If you have any further advice, I'd appreciate it.
Caoim

Can't find font already installed in System.

Similar Messages

Maybe you are looking for