Can't Find gnome-theme-manager

I just installed Arch on a new machine after using it for about 2 years on my previous computer, and I can't find gnome-theme-manager.
I have installed the following packages:
gnome
gnome-extra
gnome-themes-extras
On my old machine, gnome-theme-manager is present in /usr/bin, but not on the new one. I also checked /opt/gnome/bin which contains only gconftool.
Am I missing something stupid?
edit: not in /usr/share or /usr/sbin
Last edited by egghead3 (2008-01-21 17:19:20)

try gnome-appearance-properties
I think it changed it GNOME 2.20

Similar Messages

Gtk-chtheme overwhelms gnome-theme-manager

I just used gtk-chtheme in icewm and when I returned on gnome, I had the gtk theme instead of the one of gnome. So I tried putting the theme I wanted with gnome-theme-manager : Ocean Dream. But then, just a part of the theme would load, I had to find a theme that fits well with Ocean Dream on gtk-chtheme.
Gtk-chtheme has made some sort of shortcircuit on gnome themes. :S
Help!

gtk-chtheme writes out ~/.gtkrc-2.0, this is what sets the theme in icewm, and it's also the one setting the theme in gnome.
maybe just use gtk-chtheme in gnome?
or, run gnome-settings-daemon in icewm, and use the gnome-theme-preferences in icewm..
James

I have an iMac G4 PowerPC with OS 10.5.? The OS10.5.8 update failed. Now get blue screen and error-can't find Intel Power Manager. What now??

I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and must shut down. Now I get the blue screen. Startup with 'V' pressed shows multiple lines saying: error-can't find IntelCPU Power Manager. What now?? I reset PRAM, I think.....?????

I am concerned that you might have applied a system updated intended for an Intel iMac, while you have a PPC (non-Intel) iMac. Your PPC OS should not be looking for an "IntelCPU Power Manager."
Have you tried booting from the 10.5 install DVD/CD and repairing the hard drive, plus repairing permissions?
If you done the repairs mentioned above, and your problem still persists, you can also try doing a safe boot. (see http://support.apple.com/kb/HT1455 ) Then, if none of these things worked, if I were in your shoes (it's hard to diagnose these things without being there in person) I would first check that there is adequate disk space, then I would boot from the 10.5 DVD/CD install disk and reinstall the operating system. There is an option to do an archive and install preserving user files/settings, that would be the option you want, as it will save your files but install a new OS. Make sure you have a good backup of your files first. If you do not have one, use "target mode" to copy all your files before embarking on an new OS install. Assuming that you do succeed with this install, then use Software Update to get the right updates for your iMac.

Where can I find the Theme Editor for SP14?

Where can I find the Theme Editor for SP14? (My WebDynpro application is a standalone app, and does not run in a portal).
Thanks,
Walter

Hi,
Go thorugh the follwing Web Dynpro Java
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw04stack09themes.zip
To know how to use it and for the steps to be followed please follow the tutorial here
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to edit web dynpro themes.pdf
the last url gives you a step by step procedure with wizards..
I hope your problem is solved..
don't forget to reward
RK

I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

reinstall iPhoto
see this discussion down a few from your post
https://discussions.apple.com/thread/5426566?tstart=0
LN

Where can i find the file manager of yendo?

where can i find the file manager in yendo phone(sony ericsson)

I do not think there is a default file manager in the Yendo.
I think you have to connect your phone via the USB cable to the PC in Mass Storage Mode and use the PC file manager.

I can't find the download manager when trying to download CS6

I can't find the download manager. I'm trying to download from a special adobe licensing site.

Sorry, it's probably really easy to do, but I'm not sure how to change it. I have a Mac book. Can you help? It's strange that it seems to be the only tab missing, and only when I connect my iphone to sync, it doesn't happen when I sync my ipod. It's weird, and it never used to disappear. I need the photo tab back
Sorry, and thanks to anyone that can help

Where can I find Microsoft.SqlServer.Management.Smo?

Where can I find Microsoft.SqlServer.Management.Smo? Is this a separate download?

if i cnt found the C:\Program Files\Microsoft SQL Server\90\SDK folder~how i gotta find the Microsoft.SqlServer.Management.Smo?

Can't find "Windows Remote Management (WinRM)" in Group Policy Management console

So looking at different scenarios for enabling WinRM / PSRemote. Find all kinds of information on how to do it... stoked right!? Not so much, I can't find Windows Remote Management (WinRM) where it should be, or anywhere else. WTF? Any ideas here kids?And
OBTW, Domain Functional Level is 2008 R2 with Windows 2012 R2 DC's.

Oh man, found the answer... Doh!
Run from an elevated command prompt;
robocopy "%windir%\policydefinitions" "\\%userdnsdomain%\sysvol\%userdnsdomain%\policies\policydefinitions" /s
So there you go.

Can't find Adobe Application Manager

I've just updated Adobe Apllication Manager from the Adobe web site, but I can't find it as an application on my Mac. Where does it reside? And if it's no longer used for CC, as a subscriber to Creative Cloud for the past 8 months, how do I update the various inistalled Adobe apps. Thanks. ~Bond
2011 Mac mini, 8 mb RAM, OS 10.8.4

I've already got them all installed from CC-CS6. The application manager was the tool I used to upgrade in the past, but I can't find it! Thanks.
E. Bond Francisco, President
Marin Golden Gate Barbershop Chorus
Plateau A Champions &
Most Improved Chorus
Nor Cal West Division
Far Western District
Barbershop Harmony Society
On Thu, Jun 20, 2013 at 2:05 PM, Abhijit Kr. <[email protected]

I can't find failover cluster management after creating hyper-v cluster on SCVMM 2012 R2

I've created a hyper-v cluster on scvmm 2012 r2 but I can't find the failover cluster manager to move storage resources. all hosts are showing to have hyperv role and failover clustering feature installed. disk Witness in Quorum is good, same as for the
other CSV lun. Please help me Microsoft. Thank you.

The management consoles are not getting installed while building the cluster through SCVMM. However, its not mandatory to have the management tools on the server. You can have it on a different machine with this management tools installed and connect to
this cluster remotely.
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

[Solved] Can't get gnome network manager running

Alright this one is a head scratcher. I've folowed the wiki for network manager to a T except I can't get the network manager icon to show up (I have notification addon already running). I don't have any network loss though.
Here's my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Canada/Pacific"
KEYMAP="dvorak/dvorak"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(powernow-k8 cpufreq_ondemand cpufreq_powersave forcedeth snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo !eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network netfs crond laptop-mode dhcdbd networkmanager @alsa @hal @fam @gdm)
Last edited by dr/owned (2009-01-09 05:16:43)

I assume you're running nm-applet --sm-disable once you get a window manager session up?
Try starting networkmanager after hal. From the wiki:
You must also "disable" the default network daemon, and add the hal, dhcdbd and networkmanager daemons in this order:
DAEMONS=( ... !network hal dhcdbd networkmanager ... )

Missing APPLICATIONS & FILE Icons and can't find my themes

Please help. I have a 3rd party application that I downloaded as required to my computer & now I need to transfer 5 files (JAR & TAR) files to my phone. It says to follow the path: files/media card/ Blackberry/new_phones.In the instructions it says to go to "Applications" icon and click, then "file" icon and click which will bring up ALL files, then click on "File Folders" then Media Card, then Blackberry then press new_phones, then click new phones again and I should see the files I need to set permissions on. I do not find a APPLICATION OR FILE ICON. I can go to Options, then advanced options and then applications but when I get there nothing says FILE. I have already put everything back to factory settings thinking maybe they were deleted at some point but there is still NO icons for these. I really do need some help installing these files to my phone. I dont mind if someone wants to remote into my computer to help me even. And since I reset everything to factory settings, I can't get to ABOUT to find out what OS that I am using or when I went to set a new theme that I just downloaded it only has one BB theme (BB Dimension Zen), the new one I just downloaded isn't even showing up. PLEASE help me fix my mess up and install the files to the phone. Thanks in advance.
my phone is a Curve 8330
Tawana

It sounds like you essentially have a new computer and unless you restored from a backup your iTunes library would be empty. You can transfer your iTunes purchases from your iPod to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
SInce you changed syncing computers. after you move the stuff you need to restore the iPod to factory defaults and sync the stuff back to your iPod. If you had the iPod backup file you could restore from backup.
If you have non-iTunes pruchases you can copy them to your computer by using one of the third-party programs discussed in this previous discussion:
Best iPod to PC

Can I find a theme that uses a color I choose?

I can't figure out how I can find themes that use a color I have selected. I would like to browse available themes based on a starting color I choose, is this possible?

You can search for themes with certain colors using HEX value of color as search keyword. For e.g: Search for HEX:94090D will get you all themes using 94090D color.
However, search with color as starting point is not possible.

Can't Find Custom Work Manager For Resource Adapter

I'm creating an inbound resource adapter and wish to throttle the number of connections via a custom work manager.
If I understand the BEA docs, I can declare and define a resource adapter's work manager inside of its entry in weblogic-ra.xml .
For example:
<?xml version = "1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<jndi-name>InboundRA</jndi-name>

<work-manager>
     <name>CustomWM</name>
     <max-threads-constraint>
<name>maxthreads</name>
     <count>3</count>
     </max-threads-constraint>
</work-manager>
However, upon startup I see :
<BEA-002919> <Unable to find a WorkManager with name CustomWM . Dispatch policy CustomWM will map to the default WorkManager for the application appsdirCustom_ear> .
So it uses the default work manager.

Well, I did it again. Solved my own problem two hours after I posted it. Which, I guess, is better than not solving it.
I mistakenly thought that the <work-manager> entry in weblogic-ra.xml is a declaration. It is apparently a reference.
I declared a WorkManager of the same name in the WLS 9 console, restarted the server, and it appears that I am now using the custom work manager.
The max-threads constraint also works.

Can't Find gnome-theme-manager

Similar Messages

Maybe you are looking for