Can't Find Home network

My Iphone 4 doesn't recognize my home network...neither automatically or manually. I have an airport express setup with ethernet plugged into my Time capsule, then networked with my MacBook and IMac. It doesn't show in the list and when I enter it as "other" I get a "not found" message.
Any help? Thanks...

This may not be your problem, but:
Channel 12 and 13 are not used in all countries, it might be that your tv is defaulting to US settings after the update, it might be the case that the tv no longer works on these channels.

Similar Messages

Can Not Find Home Network On iPad 2

I have reset my network settings, reset iPad, and reset my router. I tried toggling airplane mode and Bluetooth on/off. I have not found anything that works. I have an IPad 2 and my daughter has one as well. Her iPad does not have a problem connecting to our home network but mine can not even find the network for some reason even when I'm right at the router. I have seen a lot of threads that says people began having this problem after the update but I didn't update my device and it has never done this before. it started this problem yesterday. Is there anyone else having this problem and maybe found something that will fix it?

JimHdk has the Fest suggestion. Take your iPad to some place that has free Wi-Fi like your library or a Starbucks. You might also try a friends Wi-Fi. If your iPad works with those other networks I would suspect a problem with your router. But if you iPad does not connect at those other locations you most likely have a hardware problem. In that case make an appointment at an Apple store for a consultation.

Can't find home network after 2.4 update

As the title says, after updating to 2.4 my apple tv cannot see my wireless network. It can see just about every other network in my street. If I restore to 1.0 it connects fine, upgrade to 2.4, no sign of my network. I tried this 3 times now just to make sure it is not a fluke.
Has anyone else had this problem?
I am using a Belkin F5D8631 nothing has changed on this set up, I have 3 macs, 2 phones and a wireless printer all connected to it with no problems.
Any suggestions?

This may not be your problem, but:
Channel 12 and 13 are not used in all countries, it might be that your tv is defaulting to US settings after the update, it might be the case that the tv no longer works on these channels.

Ipad2 can't find home wireless network

Hi there.
I'm getting reeeeeeeeeeeeeeally frustrated. My ipad2 had no problem finding my home network when I first bought it but I've recently had a problem with my talktalk phone line (it was down over the weekend) and now my ipad can't find my network! My desktop pc is connected and I can connect to the internet no problem. I'm using a Huawei Echolife HG520b wireless router. Even after following talktalk's instructions on-line I've not been able to find my user name/password to try and connect manually.
Can anyone help??
Singlikenooneislistening x

Sing-
Unplug your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect the iPad to WiFi. I'm not sure how you would reset the Kindle, but unplugging the WiFi may solve the problem for it as well.
If the problem continues, see <Troubleshooting WiFi Networks and Connections>.
Fred

TS1398 My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

Can't find home drive after reinstallation of O.S.X

Dear friends,
I have one ibook G4 and a Macbook Pro. Two days ago, the ibook G4 failed to start up, I tried in safe mode then pass through. Then I run Onyx-automation followed by restart, after that neither my desktop nor the sidebar of the finder window show the home drive icons,( I partitioned the internal hard disk into two drives). But when I run Disk utility and found both are there correctly, including the files and capacity, usage etc. it tested both drives "appears OK". Yesterday, I tried to reinstall O.S.X Tiger 10.4 without removing previous system via a firewire to my Macbook Pro which installed with Leopard( the disc drive of my ibookG4 corrupted last year).
finally, the hard drives are still invisible, I did tick the display options for hard disks from the preference panel of Finder. To the worse, the same problem happened to my Macbook Pro after I restarted it.
It seems a simply software issue, physically the hard disks are ok through the disk verify and permission verify.
Headache! Please advise ASAP.
thank you,
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 6:58 PM in response to: cjunxing
Reply Email
what happens when you enter commandshiftc in finder? that should show all the drives. if it doesn't, maybe the drive has acquired the hidden flag. run the following command in terminal
sudo chflags 0 /
you'll have to enter your admin password which you won't see as you type it. that's normal. see if the drive shows up.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 7:11 PM in response to: V.K.
Reply Email
dear V.K.
When I enter commandshiftc in finder, it only shows up "network", then I followed to input sudo chflags 0 / in terminal and password, but the drives still not show up.
is there any other options to try out?
many many thanks
Junxing
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:01 PM in response to: cjunxing
Reply Email
run the following command in terminal and post the results. this will list permissions flags and acls on the startup drive.
ls -ladeO /
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:03 PM in response to: V.K.
Reply Email
I run the command as follows.
Last login: Tue Nov 3 11:04:49 on ttys000
cjunxing:~ junxingchen$ ls -ladeO /
drwxrwxr-t 38 root admin - 1360 Aug 11 10:25 /
cjunxing:~ junxingchen$
pls advise
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:34 PM in response to: cjunxing
Reply Email
these permissions look fine. sorry, i don't know what the problem is or why the drive would not show in finder. does it happen on all accounts? make a new one and check from there.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 1:11 AM in response to: V.K.
Reply Email
hi, V.K.
after running the two commands, suddenly, The Macintosh HD icon showed up at both desktop and sidebar in finder, but the other drive (I partition into two parts) still not showing. Then I open Onyx and tick the "unhidden those hidden files", I found that drive. So I conclude it was hidden by sth. But I don't know how to unhidden it, the icon always in grey.
Can you please instruct again.
thank you.
Junxing
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 6:41 AM in response to: cjunxing
Reply Email
aha, so it was a hidden flag after all. then run
sudo chflags 0 /volumes/*
you may need to restart after that to make the second drive show up.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 5:33 PM in response to: V.K.
Reply Email
Dear V.K,
I run the command at my Macbook Pro, my second drive show up. So exceited! However, when I tried with my ibook G4, neither drives come out, is there any difference in the commands between Tiger and leopard. just now, I check the hidden files with Onyx, both drives are there.
Pls guide me.
thanks
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 6:46 PM in response to: cjunxing
Reply Email
sorry, I haven't dealt with Tiger in such a long time I don't remember if it respects chflags. ask on Tiger forums.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz

I don't have a source attribute for this (maybe I wrote it myself!):
There are visibility toggling instructions at [this web site|http://www.pinkmutant.com/articles/invisible.html] using Terminal or Applescript.
If you don't like Applescript or Terminal there is an application called [JuhOS X|http://www.saunalahti.fi/~juhruo/juhosx> that lets you toggle visibility on individual items. It does not have the most intuitive interface but your drive should appear on the first page. Check it really is invisible, then click on the drive and toggle visibility. Effects will not take place until you restart your finder, so the easiest thing to do then will be to restart your computer.

My iphone 4 can't find a network

I bought my iphone 4 in Ny and brought to Brazil. It was working fine till last Friday. It can't find a network anymore. It says on the upper left corner "no service" instead of showing the carrier name and its signal. I tried to contact my carrier but it seems to be everything fine, I even tried de microchip on my Ipad and it worked perfectly, so it should be a proclem with the phone.
I tried to reset the device, but nothing seems to work.
Anyone could help me on this, please!!!
(excuse my lousy english, please!)

1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
2. If that doesn't work, use this article for troubleshooting: http://support.apple.com/kb/ts1398
3. If that doesn't solve the issue, backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
If you restore your iPhone to factory settings without a backup and still can't detect/connect to any network, you should offer the device for service.
Good luck
JW

HT5569 4S phone to IOS 7.1.2 and lost my wi-fi. The wi-fi is on, but can't find ANY networks. I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

I updated my 4S phone to IOS 7.1.2 and lost my wi-fi. The wi-fi is on, but can't find ANY networks. I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help. They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition. They have no idea why it isn't working, but they could offer to sell me another phone. This is extremely annoying! They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again...

Can not access home network via ipod touch, password entered not accepted

Can not access home network via ipod touch, password entered not accepted
Trying to help my son set up his ipod touch to connect to the network and the password I entered is not accepted.
1. Which password is required? I entered the password I use for logging into my router
2. The home network is recognized, when selected it requires a password to be entered, but I am just not sure what password it is looking for to connect.
I have not been able to find any information on this subject

jersey0904, Welcome to the discussion area!
You need to enter the wireless encryption password... not the administrative password for the router.

Photosmart b209a can't find wireless network.

I've only had this printer for three days. The "Easy One Button" process to get it to find a network failed. It cannot find my wireless network.
I'm using XP Professional on my laptop. McAfee Virus scanning and Firewall. (Not that it matters if the printer can't find the wireless network)
I have a DSL D-link router with NO MAC filtering and yet when I print the Wireless Network Test Report it gives me this whole spiel on MAC address filtering and asks to add the MAC address of the printer to the router... but there's no offered solution if MAC filtering is turned off.
I've changed my router security key from WEP to WPA-PSK.
I've managed to get it to connect twice... and to print a test page on separate days. I have no idea what it is I do that gets it 'online' but it doesn't seem to last.
I have spent several hours over the past three days (wasting entire days) trying to work out what the problem is. I have read forum posts; I have googled for solutions. The troubleshooting guide for the printer seems hopeless.
The printer is on the same desk as the router with only a computer monitor between them.
When I print the HP Network Configuration Page it states the status of the 802.11 Wireless is "Disconnected". The printer's wireless light is on, showing that the wireless radio is working on the printer.
I bought HP because my last printer was HP and it was excellent (but not wireless). If I can't get it to go online, seriously, I'll take it back and exchange it for a different brand of printer. All I want is a printer I can print to wirelessly, is that so hard to ask? Yes, I'm getting really frustrated here. I live in a rural area and I don't have access to geek friends or a computer professional or anything like that and returning the printer requires a two hour drive so I have to be as self-sufficient as possible. Please, try not to use too many technical terms. I can understand some but not all and if anybody can help me, please be clear in their instructions (ie, don't just say 'go to setup blah blah blah' without saying which setup you're talking about.)
Thanks for any help. It is appreciated.

Yes, the desktop is connected to the router with an Ethernet cable.
Yes the laptop is wireless.
The printer is connected to the router via wireless (which I've already stated, it keeps losing the wireless network).
If I don't have my printer connected to the desktop via cable, then I won't have any printing capability at all, because, as I just said, the printer keeps losing the wireless network! I need at least some way of printing when the printer can't find the network (even though the wireless network is working perfectly fine).
So, desktop connected to router with cable.
Laptop is wireless
Printer is wireless for laptop use (but it keeps losing the network and therefore is totally useless in that respect)
Printer is connected to desktop via cable to enable printing because of wireless continuing to lose connection to wireless network.
In fact my printer hasn't been able to connect to the wireless network for 2 days now... even though I'm currently connected to it on my wireless laptop.
Sometimes the printer finds the network, sometimes it doesn't and when it does, if I try to print from the laptop wirelessly, the printer loses the network.
This really is poor product and the installation manual might as well be used for toilet paper for all its worth, same with the 'help' feature on the disk. I only chose HP because I was familiar with it, since my previous printer was HP and reliable (but not wireless). I'm seriously wishing I'd purchased a different brand.
I'm not an IT tech, but I've managed to be able to connect modems and routers and other peripherals to my network without too much hassle at all... until now.
I'm sorry if I sound angry but this is completely frustrating. I spent good money for a product that I am unable to use for the main purpose I bought it! I'm reduced to saving things to USB sticks and physically taking them to the desktop computer and having to print from there.

Where can i find my network key?

where can I find my "network key"?

One method is via the AirPort Utility, as follows:
AirPort Utility > Select the AirPort > Manual Setup
From the Utility's menubar: Base Station > Equivalent Network Password

Can't find my network utility ?

can't find my network utility ?

Care to share which OS you are using?
Your profile is a complete blank. Since you posted in the MBP forums, everyone is assuming that is what you have.

My Apple TV suddenly can't find my network and tells me it is not connected..help?

My Apple TV suddenly can't find my network and tells me it is not connected..help? I have reset my time capsule and have all the latest updates. My iPhone and ipad do not show airplay even though I have it turned on in Apple TV.

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your mobile device.

IPhone 4s can't find cellular network. iPad logged right on. Tried soft reset and two button reset, neither worked. In Detroit airport any ideas?

Iphone 4s can't find cellular network in Detroit airport. iPad logged right on. Tried reset network and hard boot and airplane off on. No luck. Any ideas?

So, I can see that nobody had any ideas. In case anyone is interested, I did cave and get an Airport Extreme. My iPhone 4s connected in about 3 seconds, as did my MacBook, my iMac and my old 3G phone. The router is in the EXACT SAME SPOT as my Netgear router. No reception problems, no dropping wifi.
The Sony Blu-Ray connected on the second attempt, but the TiVos are another story. Reset my N-adapters to factory default and then did setup, found the network just fine assured me that my wifi was configured to the new router, but the TiVos refuse to connect. It's always something! lol I'm sure somebody can tell me how to fix this.

Since I updated to my new 1TB Time Capsule, my HP printer can't find my network

I have an HP Officejet Pro 8600. I had no trouble connecting it to my network on my old Time Capsule. Since updating to my new 1TB Time Capsule, my printer can't find my network.
Any ideas on what's the problem here?? Sure would like to be able to print off my iPad like I used to be able to do...
Thanks in advance...cheryl

I am a bit confused.. the new TC is 2TB or 3TB disk .. there is no 1TB model sold..
If your printer is setup by wireless you will need to redo the setup from scratch.
I am not sure how you are running it.. but if you are using airprint from ipad then it has to be wireless. Then I strongly recommend you redo the setup of the TC to have short wireless name.. eg TCwifi and then setup the printer via WPS in the airport utility.

Can't Find Home network

Similar Messages

Maybe you are looking for