Can't find/install iPod Driver

I got a new PC with Windows Vista. When I connected my iPod to the USB, it said I needed the iPod Driver software. When I searched for it on my computer, I got this message:
Windows found driver software but encountered an error while attempting to install it. USB Mass Storage Device. The system cannot find the file specified. What do I need to do? Thank you.

You have to download a Hotfix for Vista from the Microsoft website. After i downloaded this, iTunes was able to recognize my iPod...FINALLY!!! after 6 months, I'm able to update my iPod.
http://support.microsoft.com/kb/937187/en-us
after you click on the Hotfix link, scroll down to the Hotfix information section, click on http://go.microsoft.com/?linkid=6294451. fill out the information...microsoft will send you a .zip with a password to download.

Similar Messages

  • How can i find/ install printer driver hp laserjet 1010 for windows 7

    Dear Sir/Madam
    I have HP laserjet 1010 Perinter. my operating system is windows 7. my printer driver did't install. how can i find driver or software intall to my computer.
    please give me some sjession. or download link
    mr mintu
    Cell. 8986272527
    e-mail - [email protected]

    The information available in the following weblink would help you to resolve the problem:
    http://h30499.www3.hp.com/t5/Windows-7/hp-LaserJet​-1010-driver-windows-7/td-p/1115411
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Windows 7 Install - Can't find my hard-drive!

    Hi guys, i'm hoping someone can help. I've recently bought a brand new Toshiba Satellite pro L650 (PSK1KA-02D01E) running Windows 7 After a few weeks, things started to get really slow. Then I woke up one morning to discover it stuck on the first screen when I turn it on.
    I thought I had a virus, so then decided to do a full re-format and re-install windows. After I formatted the correct partition, I went to install Windows 7 again Only for it to say "windows could not detect a disc drive" it asks me to install drivers for the hard-drive, which I can't seem to find.
    it's a sata hard-drive (TOSHIBA MK6465GSX) I think is the model number. I can not find the hard-drive drivers anywhere. The other strange thing, is every now and then, it finds the hard-drive, but states that windows can not install onto that drive (even when I format it, try to add a partition and so forth) I have been into bios, I don't really know a great deal of what I am looking at, but it sometimes states my hard-drive is there, and other times it does not.
    I am so desperate to get this fixed. Does anyone have any ideas? I live pretty remotely so taking it back and getting it fixed is not ideal.. but maybe necessary.
    Thanks in anticipation..
    - Gavin.

    It sounds like the hard drive is dying.  The Win7 install shouldn't need a driver for the drive.

  • Trying to install Creative Suite 5.5 can't find install.app on "root drive" of the disc?

    trying to install CS 5.5 can't find install.app on "root drive" of DVD. When I double click on icon it just shows all the languages and documentation, but nothing else - on a mac.

    What Mac? What version of OSX? You need to be more specific. Also make sure you actually have a Mac DVD...
    Mylenium

  • How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk.

    How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.

    Try calling 1-800-676-2775.  Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk).  *May* is only because they may not burn disks for Leopard anymore.
    If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
    Have you considered Snow Leopard?.  Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE.

  • How can I find the JDBC Driver version

    Hi,
    How can I find the JDBC Driver version installed on my Sun Solaris machine which
    has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
    do so or does Weblogic console say something about it
    Thanks
    Parikshit Khanna

    Parikshit Khanna wrote:
    Hi,
    How can I find the JDBC Driver version installed on my Sun Solaris machine which
    has Weblogic Server 7.0 installed on it. Is there some kind of tool/command to
    do so or does Weblogic console say something about it
    Thanks
    Parikshit KhannaThere is a jdbc DatabaseMetaData call getDriverVersion().
    The best thing to do is to download Oracle's latest appropriate
    driver from their site, and edit the start-weblogic script to
    make sure the downloaded driver is ahead of any weblogic stuff in
    the server's classpath. We do ship a driver, but Oracle usually
    has a newer better one very soon after that...
    Joe

  • I can not find a suitable driver for my hp deskjet 1280 for OS X 10.7 Lion (macbook) Please help.

    I can not find a suitable driver for my hp deskjet 1280 for os x 10.7.  Since updating my software the printer will only use basic functions and prints only black and white, how do I enable the printers full capabilities? Thanks!

    Hi,Officially the printer no longer supported on OS X 10.6 or above, therefore the reduced quality due the Generic driver usage:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=120&prodSeriesId=439162&prodTypeId=18972&prodSeriesId=439162&objectID=c018563 59
    However, you may try the 3rd party HPIJS print drivers which list your printer as supported and will more likely provide you a better qualiity then a Generic driver.
    Be sure to install any of the 3 required downloads and follow the steps to Set Up the printer:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
    Shlomi

  • LabVIEW can't find NI-DAQ driver (error 10240).

    NI-DAQ is installed, and all the tests in the configuration utility work
    fine with the PCI 1200 card. I can see a sine wave from a function
    generator, so NI-DAQ works. But no DAQ VIs run, neither the examples
    included with LabVIEW nor test programs I've written myself. Error message
    10240 is always displayed: "NI-DAQ: LV can't find NI-DAQ driver."
    I am working with an older setup, trying to recover an experiment from years
    ago. It's a Power Macintosh 7500 with a 100MHz 601 processor and a PCI 1200
    DAQ card. LabVIEW 4.0 installed. I've tried downloading several versions
    of NI-DAQ from the NI site, but I can't find any support for LabVIEW 4.0.
    Currently NI-DAQ 6.6.1 is installed, the version recommen
    ded on the site for
    Power Macs.
    Does this version of NI-DAQ not work with LabVIEW 4.0? If not, what version
    of NI-DAQ will work? Is there some way to tell LabVIEW where the NI-DAQ
    driver is?
    Upgrading LabVIEW or the hardware is a last resort. I just want to get this
    experiment running as soon as possible.
    My email address is [email protected]

    Thanks. But the version of NI-DAQ that was installed when I wrote the email
    was NI-DAQ 6.6, and still the error message appeared. I've since pulled the
    card and put it into a PC with a more recent version of Lab VIEW and it
    works.
    "Ryan M" wrote in message
    news:[email protected]..
    > The latest version of NI-DAQ supporting LabVIEW 4.0 is NI-DAQ 6.6.
    > More information regarding this can be found in National Instrument's
    > Knowledge Base at:
    >
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/d8d43c0b1b
    881101862569eb005cda39?OpenDocument
    >
    > Ryan Mosley
    > National Instruments, Applications Engineer
    > http://www.ni.com/exchange

  • EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC.  It used to show up on left side and I would slide podcasts right over to it for years,

    EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC.  It used to show up on left side and I would slide podcasts right over to it for years,  I have installed 3x with removing old install.  I also can hear a constant throbbing sound in spkrs. when Itunes turned on, pls advise.

    Hi Becki ..
    You need to "authorize" the Mac.
    Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
    Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
    More details here >  iOS: Syncing with iTunes

  • Flashing file folder - can't find the hard drive-imacG3 - 9.1

    When I attempted to start up I got a flashing "?" in a folder. I loaded the hardware test CD and everthing tested fine but no hard drive was listed. I loaded the software install CD and got the message"disk is unreadable. Do you want to inintialize". Options were Standard 9.5 GB or extended. Is there anything I can do other than initialize and lose everything? If I do initialize should it be standard or extended? If the hardware test can't find the hard drive how did the software install disk recognize it. Any ideas? Thanks
    imac G3   Mac OS 9.1.x   ibook G4 OS10.3.9

    jalacqua...
    Unfortunately both of those must run from a bootable CD or bootable device that isn't the startup volume. And, by the way, both of those applications do cost money.
    TechTool Pro comes from Micromat and you would need version 3.0.9 (final for Mac OS9) from them.
    DiskWarrior is a bit tricky as the CD is bootable only in Mac OS 10 and can cripple an iMac Slot Loading machine that hasn't had the Firmware update. They include an older Mac OS 9 version on that CD however you would have to install it into something that is bootable.
    ...Ron

  • Hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

    hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

    OR use this method
    1. Press-hold the Home button (big circle below the screen)and the Sleep/Wake button (on top of the iPhone) simultaneously.
    2. Continue holding both buttons (Ignore the"Slide to power off") until the iPhone shuts off and begins to restart.
    3.You may let go when you see the silver Applelogo.
    Thats all Folks!!

  • Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

    where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
    if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
    http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
    so i could modify and use the driver

    Hello,
    It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
    Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
    Hope this helps.
    Scott B.
    Applications Engineer
    National Instruments

  • Where can I find a print driver for my e-mac running os9.2

    Where can I find a print driver for my e-mac running os9.2

    Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
    You must supply the printer make and model for people here to help further.

  • How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

    How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

    What To Do If Your iDevice or Computer Is Lost Or Stolen
    If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T, Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. Lost or Stolen iPhone? Here’s What to do
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on MobileMe
      3. OS X Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Third-party solutions for computers:
      1. VUWER 1.5.4
      2. Sneaky ******* 0.2.0
      3. Undercover 4.7
      4. LoJack for Laptops Premium Mac
      5. STEM 2.1
      6. MacPhoneHome 3.5

  • HT201413 Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Did you try removing and reinstalling all the Apple software using:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Maybe you are looking for

  • Can send email from iphone but not from mac.

    Hi. I'm using a mac desktop and the mail app. I can receive email, but not send. I checked my port and id/pswd and still cannot send. After the app tries to send, it says the server is offline. I am able to send email fine with my iphone. Any ideas w

  • Problem with table cell editors - Dropdown by Index, getting lead selection

    Hi experts, I have a table editor with 5 columns 1st column is a Drop Down byIndex. My contex looks like this AS_DATA(Parent Node cardinality 1.1, selection 0-1)       HEADER (NODE)       DETAILS(NODE cardinality 0..n, selection 0-1)          ACTIVIT

  • "non-static ... cannot be referenced from a static..." BUT they're static!

    Well, this is starting to get a little frustrating. I compile and get "non-static method cannot be referenced from a static context", BUT I declared the method as static!!! Why am I still getting this!?! I'm calling the method from my main, as it is

  • Write to binary question

    Hi all, I have an application which stores data. First it stores some particular information in a header file. And then it acquires data in some other. THey all are stored in binary format. I convert them in text file with Graph Acquired Binary Data.

  • Decompile / reverse engineer JWS applications?

    If a program is deployed as a JWS application does that allow a user to decompile / reverse engineer the application code that is stored on the user's computer (assuming ineffective obfuscation)? If that is true then is it not better to continue to d