Can't find 'invitees' in calendar when I create an event.

Just updated to IOS 5 and I can't find 'invitees' in the calendar when I create an event. Ive seen screenshots where it is under 'repeat' but its not on my screen!? Anyone know why? Thank you

If the RAID is formatted as an NTFS Volume (Windows New Technology File System) Mac OS can read it, but cannot write it without third-party software.
The Hatter recommends an NTFS file extender package by Paragon Software.

Similar Messages

I can open files on my wireless RAID,but can't find it to save when I create pdfs

I have an external RAID, wireless. I can see it and open the files in it. However when I open a pdf or download a photo, I cannot save it to the RAID. It is not an option. I am fairly new to Mac, so any help would be appreciated. Thanks

If the RAID is formatted as an NTFS Volume (Windows New Technology File System) Mac OS can read it, but cannot write it without third-party software.
The Hatter recommends an NTFS file extender package by Paragon Software.

How can I find out what calendars are in my .mac account?

A simple question, but I am struggling with the answer.
I have used ical since it first came out and have found it brilliant and very easy to use and access both from the office and also from home. However because I have used it for so long I have had various changes in staff. I am keen to find out if there are any 'other' calendars created by anyone who has/had access to ical via my .mac account.
The calendars must be stored somewhere online? How can I find out what calendars I am hosting?

Hello, chunnyb.
Thank you for visiting Apple Support Communities.
Here are the steps on how to view your purchase history in iTunes.
iTunes Store: See your purchase history and web order numbers
http://support.apple.com/kb/ht2727
If you need to report and issue with a purchase, see the article below.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Cheers,
Jason H.

HT4137 i can't find my iPhone name when i right click to backup. but i see my backup folder in the mobile sync. how do i get that folder to go into itunes

i can't find my iPhone name when i right click to backup. but i see my backup folder in the mobile sync. how do i get that folder to go into itunes

"Where do I find my hundreds of dollars of downloads I have done since 2005?"
They will only be where you put them If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
The itunes store is not global at all, never has been. You cannot redownload your content from another country. You can only use the countrys itunes store for the country that you are physically located.

Where can i find .trn file location when i successfully take the back up of the database?

Where can i find .trn file location when i successfully take the back up of the database?
I accidentally deleted some records in my table, then i followed the procedure based up on this blog:
"http://sqlbak.com/blog/recover-deleted-data-in-sql-server/"
here it saying to find the .trn file, So here i am unable to find the .trn file where the location file i can found.
Can some one help to find out of this issue.
Ramesh S

Hi,
Try this select to check backup history:
Select
r1.database_name,
r1.name,
(case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType,
r3.physical_device_name,
r1.backup_start_date,
r1.backup_finish_date,
r1.backup_size,
r1.compressed_backup_size,
r2.is_compressed,
r1.server_name,
r1.first_lsn,
r1.last_lsn
from msdb.dbo.backupset r1
inner join [msdb].[dbo].[backupmediaset] r2
on r1.media_set_id = r2.media_set_id
inner join [msdb].[dbo].[backupmediafamily] r3
on r1.media_set_id = r3.media_set_id

I can't find my root files when I click on the pictures icon in iPhoto

I can't find my root files when I click on the pictures icon in iPhoto, I'm having a huge problem and I can seem to access the files and not sure where they are?

See the user tip on accessing your files in iPhtoo
LN

I can't find my 2013 calendar event on IPhone 4 with IOS7 update

I can't find my 2013 calendar events on my Iphone 4 with the IOS7 update

Within the Calendar app, tap Calendars at the bottom center of the screen. Tap on Show All Calendars.

HT1550 I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

You can't do it in one step. Add to iTunes first, Once the tracks are in iTunes you may convert to a different format.
tt2

Where can i find the option of, when i close firefox that he saves my current tabs and when i open my firefox i will still have them?

Where can i find the option of, when i close firefox that he saves my current tabs and when i open my firefox i will still have them?

Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows or otherwise have problems with restoring tabs. 
You can use "History > Restore Previous Session" to get the previous session at any time. 
You may need to click the orange/gray Firefox button to see History. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
* Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
* http://kb.mozillazine.org/Menu_differences
Make sure that you do not use "Clear Recent History" to clear the 'Browsing History' when you close Firefox.
* https://support.mozilla.org/kb/Clear+Recent+History

Calendar events not being sent immediately.....finding out when I created an event.

I recently created a calendar event on my iPhone 5. I invited an attendee who received the event too late (approximately 36 hours later). Is there a way to verify and view when I created the event? Also, is this a common problem? Why would this have happened? It definitely makes me not trust using the calendar app for creating and sending event invites. It is CRITICAL that I view when I created the event. Thanks in advance for any help or advice.

Hi Dave,
From your description, the mailbox you use for conference is not a special room mailbox. It is a standard user mailbox. I think that is the problem, it should be configured as a room type and not a user mailbox.
If I have misunderstood your concern, please feel free to let me know.
What's more, about how to create and manage room mailbox, here are some helpful threads for your reference.
Create a Room or Equipment Mailbox
http://technet.microsoft.com/en-us/library/bb124952(v=exchg.141).aspx
Managing Resource Mailboxes and Scheduling
http://technet.microsoft.com/en-us/library/bb124374(v=exchg.141).aspx
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Can't find the bean which was just created??

Hi all.
I am completely stuck at this problem. I'll try to explain it as briefly as possible. (Btw I use Weblogic 8.1 and Oracle 10g DB).
I create an entity bean (it has a String as a primary key). It has some relationships, everything is set up nicely. Upon creation I put the Id in a JMS message, the message in a JMS queue and finish the method.
From the MDB that gets this message I do findByPrimaryKey(id) and it complains it cannot find my bean. Why? I can see it in the database. Also if I send to the MDB an ID from a bean that was created earlier, it works. It just can't find the bean that was just created, as if it wasn't "commited".
What could be the cause of this? Is there an easy way to explain/solve it?
I appreciate any kind of help. Thanks in advance. Cheers!

Does the database insertion and the JMS publish occur in the same XA
transaction? It sounds like the JMS commit happens (sometimes) quick
enough that the other resource (the database) has not finished commit
processing yet. So you don't find your key.
-- Rob
Baba Baba wrote:
Hi all.
I am completely stuck at this problem. I'll try to explain it as briefly as possible. (Btw I use Weblogic 8.1 and Oracle 10g DB).
I create an entity bean (it has a String as a primary key). It has some relationships, everything is set up nicely. Upon creation I put the Id in a JMS message, the message in a JMS queue and finish the method.
From the MDB that gets this message I do findByPrimaryKey(id) and it complains it cannot find my bean. Why? I can see it in the database. Also if I send to the MDB an ID from a bean that was created earlier, it works. It just can't find the bean that was just created, as if it wasn't "commited".
What could be the cause of this? Is there an easy way to explain/solve it?
I appreciate any kind of help. Thanks in advance. Cheers!

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud.

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud due to older running system on my macbook pro.

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

WLAI doesn't create appropriate triggers when I create an event

When I create an event for an application view in WLAI, the appropriate database
triggers for that table are not being created properly. I am trying to create
an event that listens on the CUSTOMER_TABLE table for an insert. When I run the
test, put an ample amount of time, and perform an insert/commit manually, the
system doesn't recognize the insert.
The problem is that there is no trigger created on the CUSTOMER_TABLE that would
write data to the EVENT table. I have investigated the DbmsEventRouter settings,
web.xml, and other connection settings and can't find anything wrong with them.
My user on the database has the ability to create triggers as well. The server
console also does not report any errors (other than the timeout).
Is there something I am missing that would cause an event creation to NOT write
the appropriate trigger with it? Thanks in advance.
Dan

Dan,
Please verify the following:
1) that an insert trigger exists on the table in question. If there is no trigger,
then the EVENT table will not get populated.
2) that the data source you've specified when connecting to the EIS is the same as
what the event generator/router has in the web.xml
3) that there are no other instances of the event generator/router listening on the
same EVENT table. If so, it could be that the other instance of the event
generator/router gets the events and deletes them from the EVENT table. This would
give the other event generator/router the impression that no events have happened.
Cheers,
Chris
Dan Kim wrote:
When I create an event for an application view in WLAI, the appropriate database
triggers for that table are not being created properly. I am trying to create
an event that listens on the CUSTOMER_TABLE table for an insert. When I run the
test, put an ample amount of time, and perform an insert/commit manually, the
system doesn't recognize the insert.
The problem is that there is no trigger created on the CUSTOMER_TABLE that would
write data to the EVENT table. I have investigated the DbmsEventRouter settings,
web.xml, and other connection settings and can't find anything wrong with them.
My user on the database has the ability to create triggers as well. The server
console also does not report any errors (other than the timeout).
Is there something I am missing that would cause an event creation to NOT write
the appropriate trigger with it? Thanks in advance.
Dan

Alert and second alert when you create new event

problem with alert and second alert when you create new event on calendar. but only in russian iphone language!
this problem starts iOS 7 up to the present time iOS 8.1.1. this problem has been seen on iPhone 4,iphone 4s,iphone 5, iphone 5s,iphone 6,iphone6+

Settings>General>Reset> Reset all Content and Settings
standard fixing such bugs, but not in this time

My LV program can't find the iak file when the program is loaded from a different PC.

Hello all,
My LV vi with Fieldpoint I/O and it's IAK file are stored on the company network.  If I load and run the LV vi from the PC it was developed on, everything is fine. If I load and run on a different PC (that has an identical install of LV), the LV vi can't find the IAK file (all of the I/O pointers to the file are grayed out.)
Also, if I make an EXE out of the vi on the machine that can find the IAK, it won't find it if it's run from the other machine.
It is not related to whether one machine has different "rights", as they are identical. It's not related to different installs of LV, as they are identical.
I have found that this is related to the network login name/password, and to the machine's network name.  If I login on the second machine and try to run the program, it won't find the IAK. If I point it to the IAK it will run. If I save it and log out, and then login as a different user with the same rights on the second machine, it won't find the IAK again, until I re-point it there when I re-run it. This is true for both the vi and the EXE.
This problem makes deploying the EXE difficult to different machines, as the first time it's run, the EXE has to be pointed to the IAK. Pointing the EXE to the IAK is difficult as these installations have no keyboard or mouse.
Does anyone have any ideas on how to fix this so the LV vi or it's EXE finds the IAK from no matter where it's loaded from?
Thanks,
Mike

Laura,
I figured I'd continue this thread because it's along he same line..
I have two Fieldpoint systems. They are identical, except for one thing...one has an AI-110 in position 7...the other has nothing. Both have the same IP address, etc and I swap the ethernet cable between them when I want to select which one I use. I use a dedicated ethernet card to the FP processor...and it's not the company net.
There are two IAK files...one for the system with the AI-110, one for the system without the AI-110. The two IAKs are in different paths.
Before I had the system and the IAK without the AI-110, I made an EXE of the code that woked with the AI-110, and it worked fine.
But now if I run the EXE after I've used MAX and opened the IAK without the AI-110, the EXE won't read the AI-110! I have to go back into MAX and open the IAK that has the AI-110 in it, close MAX and restart the EXE for the EXE to see the AI-110. (Max is NOT SET to "Download Items on Save")
I looks like the EXE is looking at MAX to get the IAK or a pointer to the IAK.
Did I build my EXE incorrectly? Shouldn't an EXE completely ignore MAX once it's made?
Thanks,
Mike

Can't find 'invitees' in calendar when I create an event.

Similar Messages

Maybe you are looking for