Can't find IPTC metadata after Aperture export into Lightroom

Hi all, 
I'm sure you've already worked through this pain, so maybe you'll have some insight for me:
I am exporting approximately 25,000 images from Aperture 2.1.4 and importing them into Lightroom 4.  I started working with my small projects of about 300 images to test.  From Aperture, I exported the Master files with the Sidecar (IPTC4.XMP) files.  [My masters are a mix of .jpgs and .NEF, and I read that the jpgs don't always carry the meta data through].  I successfully imported the master files into Lightroom and ran the "Read Metadata from File" command.  I also exported the keywords file from Aperture and imported those into Lightroom as well. 
Prior to exporting, I edited one file in Aperture by entering "test caption", "test location", "test keyword", "test copyright" etc. into several of the IPTC fields.  These fields are NOT appearing in the equivalent Lightroom fields.  I checked the .XMP file (using text edit) and it does contain the correct "test values".  I am getting all of the EXIF metadata, but none of my custom values.
Is it as simple as not looking in the right place in Lightroom for my values?

John, and Brent -
Yes, thank you, you were both right.  Here is an updated screenshot showing the image in both applications, with the metadata where I expected it.  The trick, in my case, was to follow "Method 1" in the link above, to write the IPTC data into the .jpgs.  I'll use the sidecar method for the .NEFs, probably.  Also, expanding the fields proved that the keyword was present.  I'm sure I can mess around with the Display Metadata options from Default to other things.  All well; heroes to the rescue!
Regards,
Grace

Similar Messages

  • Can't find home drive after reinstallation of O.S.X

    Dear friends,
    I have one ibook G4 and a Macbook Pro. Two days ago, the ibook G4 failed to start up, I tried in safe mode then pass through. Then I run Onyx-automation followed by restart, after that neither my desktop nor the sidebar of the finder window show the home drive icons,( I partitioned the internal hard disk into two drives). But when I run Disk utility and found both are there correctly, including the files and capacity, usage etc. it tested both drives "appears OK". Yesterday, I tried to reinstall O.S.X Tiger 10.4 without removing previous system via a firewire to my Macbook Pro which installed with Leopard( the disc drive of my ibookG4 corrupted last year).
    finally, the hard drives are still invisible, I did tick the display options for hard disks from the preference panel of Finder. To the worse, the same problem happened to my Macbook Pro after I restarted it.
    It seems a simply software issue, physically the hard disks are ok through the disk verify and permission verify.
    Headache! Please advise ASAP.
    thank you,
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 6:58 PM in response to: cjunxing
    Reply Email
    what happens when you enter commandshiftc in finder? that should show all the drives. if it doesn't, maybe the drive has acquired the hidden flag. run the following command in terminal
    sudo chflags 0 /
    you'll have to enter your admin password which you won't see as you type it. that's normal. see if the drive shows up.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 7:11 PM in response to: V.K.
    Reply Email
    dear V.K.
    When I enter commandshiftc in finder, it only shows up "network", then I followed to input sudo chflags 0 / in terminal and password, but the drives still not show up.
    is there any other options to try out?
    many many thanks
    Junxing
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 8:01 PM in response to: cjunxing
    Reply Email
    run the following command in terminal and post the results. this will list permissions flags and acls on the startup drive.
    ls -ladeO /
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 8:03 PM in response to: V.K.
    Reply Email
    I run the command as follows.
    Last login: Tue Nov 3 11:04:49 on ttys000
    cjunxing:~ junxingchen$ ls -ladeO /
    drwxrwxr-t 38 root admin - 1360 Aug 11 10:25 /
    cjunxing:~ junxingchen$
    pls advise
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 2, 2009 8:34 PM in response to: cjunxing
    Reply Email
    these permissions look fine. sorry, i don't know what the problem is or why the drive would not show in finder. does it happen on all accounts? make a new one and check from there.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 1:11 AM in response to: V.K.
    Reply Email
    hi, V.K.
    after running the two commands, suddenly, The Macintosh HD icon showed up at both desktop and sidebar in finder, but the other drive (I partition into two parts) still not showing. Then I open Onyx and tick the "unhidden those hidden files", I found that drive. So I conclude it was hidden by sth. But I don't know how to unhidden it, the icon always in grey.
    Can you please instruct again.
    thank you.
    Junxing
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 6:41 AM in response to: cjunxing
    Reply Email
    aha, so it was a hidden flag after all. then run
    sudo chflags 0 /volumes/*
    you may need to restart after that to make the second drive show up.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
    cjunxing
    Posts: 9
    From: china
    Registered: Jul 8, 2008
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 5:33 PM in response to: V.K.
    Reply Email
    Dear V.K,
    I run the command at my Macbook Pro, my second drive show up. So exceited! However, when I tried with my ibook G4, neither drives come out, is there any difference in the commands between Tiger and leopard. just now, I check the hidden files with Onyx, both drives are there.
    Pls guide me.
    thanks
    macbook pro Mac OS X (10.5.4)
    V.K.
    Posts: 20,162
    From: Toronto
    Registered: Oct 24, 2005
    Re: can't find home drive after reinstallation of O.S.X
    Posted: Nov 3, 2009 6:46 PM in response to: cjunxing
    Reply Email
    sorry, I haven't dealt with Tiger in such a long time I don't remember if it respects chflags. ask on Tiger forums.
    Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz

    I don't have a source attribute for this (maybe I wrote it myself!):
    There are visibility toggling instructions at [this web site|http://www.pinkmutant.com/articles/invisible.html] using Terminal or Applescript.
    If you don't like Applescript or Terminal there is an application called [JuhOS X|http://www.saunalahti.fi/~juhruo/juhosx> that lets you toggle visibility on individual items. It does not have the most intuitive interface but your drive should appear on the first page. Check it really is invisible, then click on the drive and toggle visibility. Effects will not take place until you restart your finder, so the easiest thing to do then will be to restart your computer.

  • I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

    I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

    Here to help shed some additional light on this case, jdondr. I also own a Maxx. With your phone, if you access the Gallery, there should be a folder named: Messaging.  If you look at the upper left hand corner, you should see a drop down box. Is it currently set to Albums?
    NicandroN_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I can't find me dvd after windows7 instaling on hp pavilion dv2700.i can't run any dvd or cd.

    I can't find the dvd after windows 7 installing,onhp pavilion dv2700. can't run any dvd.

    Dear Customer,
    Welcome to HP Support Forum and we are glad to assist you.
    It looks like you are not able to Boot into the Operating System on your Notebook.
    We will surely assist you with this.
    Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
    As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition
    is in a working condition or not, If yes you can easily recover/restore your Notebook
    If Recovery Partition is corrupted
    You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
    OR
    You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
    I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Can't find my notes after updating to OSX10.9

    Can't find my Notes after updating to OSX10.9.
    Notes appears blank when open it. Help says they should have transferred from Mail, but they haven't.
    Any tips on how to get them back?

    make sure you have itunes 11.1 installed

  • Time Machine can't find external drive after installing Lion

    Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro  says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

    Does the drive work when just directly connected? If so, have you prepped the drive?
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • HT3680 where can i find this program after reading the whole story?

    where can i find this program after reading the whole story?

    could this knowledge base article be what your looking for?:
    HT3680

  • How can I import an Aperture Catalog into Lightroom and retain the RAW file as well as the files with the edits?

    I have several catalogs in Aperture that I would like to import to Lightroom 5 and I want to retain the original RAW files as well as the files with the edits.  How can I do this?

    Well, you can bring in the raw file (without edits), and you can bring in a rendered RGB file (e.g. jpeg or tiff) with edits baked in, but what you CAN'T do is bring in a raw file, with the non-destructive Aperture edits, and have Lr translate those Aperture edits into Lightroom edits.
    Put another way: no raw converter/editor can understand the edits of any other raw converter/editor. So, you have to work with a rendered version, and/or re-edit from scratch in a new raw converter/editor.
    PS - it would be feasible to write a rough translator which approximated raw edits in one world into edits in another, but such does not exist yet for Aperture -> Lightroom, that I know of.

  • Can I transfer files from Photoshop Elements 9 into Lightroom 4.4? [was: Photoshop & Lightroom]

    Can I transfer files from Photoshop Elements 9 into Lightroom 4.4?

    You need to Upgrade the PSE catalog
    http://helpx.adobe.com/lightroom/help/import-photos-various-sources.html#import_photos_fro m_photoshop_elements

  • Can I import a photoshop elements 11 catalog into lightroom 4 ?

    Can I Import a photoshop elements 11 catalog into lightroom 4

    "Catalogs from Photoshop Elements 11 would not update in Lightroom."
    Reported as fixed as of LR 4.3: http://blogs.adobe.com/lightroomjournal/2012/12/lightroom-4-3-now-available.html

  • Can not find a library in Aperture after upgrading to Mavericks?

    I upgraded my Aperture to 3.5 on Mavericks. Since I have updated my Aperture, I cannot open my second Library "Aperture Library"
    This is what it happens:
    I can not find my "Aperture Library" photos, and when I try to switch between the library (File>Switch Libaries>"Aperture Library" this comes up:
    When I click on relaunch:Then when I click on "Aperture Library" and press chose, a 3 second process occurs and Aperture returns back to where it was when it was opened. The "Aperture Library" doesn't appear anywhere.
    When I go to Altinoz (My Mac) > Pictures > Aperture Library:
    When I try to open the Aperture Library folder in My Mac > Pictures > Aperture Library
    Do you want to import this library to Aperture (which was already in the old verison of Aperture)
    An error comes up:
    The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture 3 and try again.
    I would really appreciate your help on helping me find "Aperture Library" Photos I have, since the upgrading to Mavericks really made annoying problems to me.

    It seems to me that you need Aperture 3.2.4 to open your library.
    If you have it then do the following:
    Uninstall Aperture 3.5
    Install Aperture 3.2.4
    Start Aperture and verify that you can access your library
    Update to Aperture 3.4.5
    Start Aperture and verify that you can access your library
    At the end update to Aperture 3.5 and upgrade your library
    If you don't have the older versions, maybe try to open the library in iPhoto. Does that work?

  • Can't find original patch after making an alias

    How to retrieve the original patch after making an alias. It seems lost in the backgroung of mainstage. Help! :-)

    iPhoto used to place the photos in a standard directory "iPhoto Library" but this has now become a package, which hides access to the contents--just like in many applications--to keep you from rearranging them. You (or I) cannot directly access the contents but the "package" is just a specially marked directory. If you know a filename of one of the pictures or albums then you can search for that and it will find the file/photo. Then you have access to the directory and can go up, down, or over. It uses the same names in several of them.
    The head shots you are seeing may be the "Faces" feature of the new iPhoto. They will be in a separate directory, as well as directories for original, modified, and others. Interesting, it did not find the photo names on the backup disk. Differing degrees of hiddenness? You can get there with Terminal. This is what I found in mine--notice the thumbnails used in album views:
    2001 Dir.data Thumb64Segment.data
    2002 Library.data ThumbJPGSegment.data
    2003 Library.iPhoto face.db
    2004 Library6.iPhoto face_blob.db
    2005 Library6.iPhoto.bak iPhoto Selection
    2006 Metadata Backup iPhoto.ipspot
    AlbumData.xml Modified iPhotoAux.db
    AlbumData2.xml Originals iPhotoLock.data
    Auto Import Roll 249 iPhotoMain.db
    Data Roll 251
    Data.noindex ThemeCache
    Your best bet is to select the photos you want and export them where you can have the JPEGs.
    After import, I export so I can use shootShifter to adjust the names to be their exposure dates in yymmdd hrmise format. (You did set the camera's date.)
    -Ken

  • Can't find original files after uploading photos through iPhoto

    I'm a recent "convert," and yesterday I uploaded some pictures directly through iPhoto for the first time. Then I tried to log onto Facebook to create a photo album and couldn't find the original photos in my "Pictures" file or anywhere else. I found I could access the "iPhoto Library" option but it distorted my photos by zooming in on the faces of people in the picture!
    Where are my original files?

    iPhoto used to place the photos in a standard directory "iPhoto Library" but this has now become a package, which hides access to the contents--just like in many applications--to keep you from rearranging them. You (or I) cannot directly access the contents but the "package" is just a specially marked directory. If you know a filename of one of the pictures or albums then you can search for that and it will find the file/photo. Then you have access to the directory and can go up, down, or over. It uses the same names in several of them.
    The head shots you are seeing may be the "Faces" feature of the new iPhoto. They will be in a separate directory, as well as directories for original, modified, and others. Interesting, it did not find the photo names on the backup disk. Differing degrees of hiddenness? You can get there with Terminal. This is what I found in mine--notice the thumbnails used in album views:
    2001 Dir.data Thumb64Segment.data
    2002 Library.data ThumbJPGSegment.data
    2003 Library.iPhoto face.db
    2004 Library6.iPhoto face_blob.db
    2005 Library6.iPhoto.bak iPhoto Selection
    2006 Metadata Backup iPhoto.ipspot
    AlbumData.xml Modified iPhotoAux.db
    AlbumData2.xml Originals iPhotoLock.data
    Auto Import Roll 249 iPhotoMain.db
    Data Roll 251
    Data.noindex ThemeCache
    Your best bet is to select the photos you want and export them where you can have the JPEGs.
    After import, I export so I can use shootShifter to adjust the names to be their exposure dates in yymmdd hrmise format. (You did set the camera's date.)
    -Ken

  • Can't find mails anymore after update from Tiger to Leopard

    I've just updated my IMac from Tiger to Leopard (OSX 10.5.6).
    After opening the Mail program I just see the menu bar (no window for the postbox).
    When I open the postbox via the menu bar, the box is just empty. Are my mails gone? Where can I find or restore them?
    Thanks for help,
    Vanillia

    Let's force an overall reindexing via the removal of the Envelope Index. Note the special instructions when forcing the reindexing of IMAP or Exchange accounts in the following:
    http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
    This will force the reindexing of all the POP mailboxes and all On My Mac mailboxes. With regard to any IMAP accounts if you have any, the practical result of this action of removing the account folder, is that with the IMAP account still set up in the Preferences, Mail will connect to the IMAP server and create a new account folder, and while doing so will index the messages in the mailbox folders of the IMAP accounts on the server.
    Keep me posted.
    Ernie

  • I can't find ios partition after installation of Windows 7 via boot camp. can someone help please?

    I installed Windows 7 via boot camp and now I can't find my Mac partition. My commuter boots up to a blank gray screen and after several minutes the Windows partition starts. I don't know what to do. Can someone help me?

    In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
    and Boot Camp: Install or repair Boot Camp drivers.
    The other option is to use
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    How to Reset NVRAM on your Mac - Apple Support

Maybe you are looking for

  • New 20" iMac Dual - anyone seen this video problem?

    My CTO iMac arrived this morning. Specs are: 20"/2.0/256MBVRAM/2GB/500GB. I migrated everything (files, apps, settings, etc) from my 1.67GHz PB. Shortly after that, I tried Front Row for the first time. Almost immediately, I noticed a problem. Rather

  • Help with computer and Mountain Lion

    I am running Snow Leopard on my iMac but cannot upgrade to Mountain Lion because my computer was purchased in early 2007. Is there any way to get the iCloud for this computer?

  • Line of best fit in scatter plots

    when making a line of best fit ( in this case a curve of best fit) how do I extend the curve beyond my data so that I can extrapolate information? Can I do this or will I have to do it manually? (print it out and draw it myself)

  • Best way to use iPod in the car?

    Is there any consensus on the best way to use your iPod in the car? I have used the Belkin Car Kit with the cassette tape for over a year with my 20GB iPod and I really like it. It keeps my iPod charged and the sound quality is really pretty good I t

  • What Happened to This Feature?

    in the guided tour it was show many times that in contacts and camera roll (stuff with a scrolling menu) that if you tapped the top menu bar it would bring you to the top.. is it just my phone or does no one have this?