Can't find Led indicator

HI,
I have installed Measurement studio 8.5 to work with my VB6. I can't find the led indicator. In which activeX should I find it? Did I fail to install something?
Thanks
Rafi
Solved!
Go to Solution.

Hi Rafi2003,
The LED is part of National Instruments CW UI. You will see the CW button (toggle switch) in your toolbox when this is a selected component. You can place this control on your form and right click to bring up the properties. In the property pages dialog box that appears, you will see the LED indicator located under the style tab.
Cheers,
Kelly R.
Applications Engineer
National Instruments

Similar Messages

Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

There were no PowerBooks made in 2007. By then Apple had switched over to Intel and they were making MacBook instead.
If the MacBook is what you really want try http://en.wikipedia.org/wiki/MacBook
Allan

I can't find the tether usage indicator since I upgraded to iso7. I need to keep track of my tether data. Where is it?

I can't find the tether usage indicator since I upgraded to iso7. And I need it to track my tether usage. Where is it?

I already tried going to settings>cellular but all that shows is the total data usage. It doesn't break it down between the total amount of data and total amount of tethering like the old operating system did. Any other suggestions.

Ni-can filter ID with led indicator

Hello,
I am currently using ni-can usb 8473s and combine two examples vi to one. Can_receive.vi and Can_data filter.vi.
I can filter the ID with no problem but would like to add more than one filter IDs, also have a led indicator to verify that it filter the individual ID.
Also when I write to CAN my ID does not show up on the array output when it reads all the CAN signal.
Any help would be appreciate.
Thanks
Attachments:
Frame - Basic.llb ‏38 KB

It's not that I get an error. When I set up a message in MAX, there is no way to send the message without a data channel, that I know of. If I create a channel within a message, MAX does not like it since I'm specifying 0 bytes of data in my message. If I specify a channel to write within LabVIEW, would it just send the message and 0 bytes of data, even though MAX gives me an error? A sample .ncd file is attached.
Attachments:
test.zip ‏1 KB

Where can I find the original serial number? I have only one number indicating it's an upgrade when I try to reinstall LR 5 to my other computer

Where can I find the original serial number? I have only one number indicating it's an upgrade when I try to reinstall LR 5 to my other computer

You might be able to find the serial number for the older version of Lightroom thru your Adobe account online if you registered it when you installed it.

Can't access songs in iTunes. There are exclamation marks on about half of my library. When I try to play them I get: "Can't find the file" notice and iTunes asks me to locate each song. Why is this happening and how can I fix it?

I had not opened my iTunes in weeks. When I opened it today, most of the songs in my library had exclamation marks beside them and when I clicked on them got the message: "the song could not be used because the original file cannot be found", then asks me if I want to locate it. When I press "locate" tab I am led to iTunes folders and have to hunt around for the song. Some songs I can't find in the folders. Any ideas as to why this is happening and what I can do to fix it?
Help would be much appreciated.
Thanks.
PE

The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck.

I used to have a indicator of time when attaching file in Yahoo Mail...I no longer have that in Safari 5.1.5...How can I get that indicator back???

I used to have a indicator of time when attaching file in Yahoo Mail...I no longer have that in Safari 5.1.5...How can I get that indicator back???

I tried to find help with the support by web chat for 2 days already, but every time it says that chat is un available (even if it's suppose to be 24/7)... I dont know what else to do.... please help!

Can't find driver for SB0

Hello,
I have an Audigy card (SB0230), and I can't find a driver for it. I tried few solutions, and here are what I done already:
- I tried to install the newest driver from creative.com for Audigy board, but installer don't recognized my card and stopped.
- I installed KX Audio driver. Everything went ok, installer recognized my card and I had sound, but I bought this card not only for music, but for games too, so lack of EAX led me to uninstall this driver.
- I tried from the other side with the official driver. I unpacked it with WinRAR, installed it from Device Manager. It told me that this driver is not compatible with my device, but I ignored it and after restart I heard sound Unfortunetly, as for now I don't have any control over the card. Even Realtek has a control panel, so I figured out, that I must run installer to do something with my card, than just set volume :P Am I right? Where can I find driver for it's
I have Windows Vista, but in XP everything was the same (and I used KX in XP).

For Vista try this one,
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=2502

Itunes can't find songs

Wonder if anyone could help with a problem. I have my iTunes library on an external hard drive. I always try to make sure I connect the drive before opening iTunes but on one occasion I didn't and I found that iTunes changed the library to the default location on my C drive (in my docs/my music folder). I instantly changed this to point to the one on the external drive (H) but now I am getting question marks next to loads of songs indicating that iTunes can't find them. I can't work out why this is??
Does iTunes do something else when moving the location of the library?
Is there a quick way to get iTunes to see all these tracks again without re-importing the tracks from the external drive into iTunes?
Regards
Chris

Whit the library location pointing to your external drive, you can click on file at the top of itunes and use add to library. Then in the window that comes up, navigate to the drive and folder that houses your music. If the music is exactly the same, itunes should re-associate the music back to itunes without duplicating entries.

The sound effects volume is all the way down. It pops on for a second, then disappears. I can't find it in settings. How do I get the sound back?

The sound effects volume is all the way down. It pops up for a second once in awhile and then disappears. I can't find it in the Setting. Music sound plays fine, but no sound on my apps. Any idea how to fix it?

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

IPhoto can't find original photos after volume name change

I had to reformat my drive and do a fresh install of Mountain Lion. I was pleased that the Migration Assistant imported all the user accounts, apps, etc. from a Time Machine backup. Never could have done *that* with Windows...
However, in iPhoto, I *do not* copy pictures from my Pictures folder into the iPhoto library and iPhoto can't find them. I expect that this is because I changed the volume name when I reformatted the drive, which is embedded somewhere in the iPhoto package in my Pictures folder.
Does anyone know which iPhoto files I can edit or batch edit to change references from the old volume name to the new one? Is this information stored in text or XML files that I can edit or is it embedded in binary files? I thought I might be able to reimport the photos from the current volume and iPhoto would sort out the duplicates (not a great option if I get prompted for each one though...) but I wasn't sure if that would preserver events, faces, etc.
When I try to rebuild the iPhoto library, I get a dialog indicating each file cannot be found on the volume. While it provides an option to browse for the location, this isn't practical due to the 1000's of photos and movies on the drive.
Any help would be appreciated. Thanks in advance!

As OT says, the primary reason not to run a Referenced Library, and, most especially, not one where you have the Library on one Volume and the photos on another.
You're going to have this problem again and again any time you make a change to your hardware set up - including upgrading your machine and so on.
Going forward: Do you have Aperture? This has a command to Locate Referenced Masters which should help. Other than that, how are you at hacking SQL databases? That's what this guy did:
https://discussions.apple.com/thread/3216539?tstart=30
back up first...
Regards
TD

How do I reload my bookmarks if I can't find the 'date.json' file in my backup?

My hard drive crashed and everything had to be retrieved and reinstalled. I have a folder of old Firefox data but can't find the 'date.json' file that is indicated to open in the troubleshooting instructions. Is there another option?

Hello,
If you have the latest Firefox version, the ''places.sqlite'' file is what holds your bookmarks. Please see the article [[Recovering important data from an old profile]] for more information.

Where can I find out how much a Skype Number costs...

So, I get an email on Skype numbers. I click because I am interested and all I get in a bunch of fluff about how great it is. There is nothing that I can find about cost, anywhere. Is it under prices? No, or at least I did not that I see after clicking on every single option.
What is Skype hiding? The information should be there after I click from the email or at the very least after one additiona click. I shouldn't have had to go here to the community board to find out, and yet the only search that generated the information was the one here on the Community Board.
Enough of this manipulative crap. Skype needs to honest. Because of Skype's lack of transparency -- that i cannot be sure what I am buying -- my opinion of Skype is the lowest possible.

Hi, JohnB47,
Please permit me to clarify:
JohnB47 wrote:
So, my understanding is that all I would pay is the ongoing subscription for the phone number,
Correct! A Skype Number subscription is not bundled with other subscriptions or features. However, if you purchase a subscription first, a Skype Number is offered at a discounted price.
JohnB47 wrote: plus the call charges -
Correct! You will need either to Buy Skype credit or a Skype subscription in order to cover the costs of calls placed to fixed lines or mobile numbers from Skype.
JohnB47 wrote: i.e. there are no other recurring costs?
As long as outgoing call costs can be covered by the call subscription you purchase, there should be no additional costs. If you do attempt to place a call which falls outside what the call subscription covers, you will see a pop-up message indicating you would need to purchase credit to cover those charges.
To gain a clearer understanding of Skype subscriptions, I recommend a read through this FAQ article: https://support.skype.com/en/faq/FA10414/how-do-subscriptions-work
Here is a link to the library of FAQ articles dedicated to Skype Numbers (formerly known as an "online number:" https://support.skype.com/en/category/ONLINE_NUMBER_SKYPEIN/
Kind regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How can I find out how many pros intend to use FCP X?

I work at a school and we have been teaching FCP 6 as part of a Multimedia program. Our goal is to provide training to students so they can continue on with a degree, or gain enough basic skills to get employment. I am now a bit concerned with FCP X. If the pro editors are not going to be using it then we will be doing a disservice to our students by continuing to teach it.
1. How can I find some type of data indicating the adoption rate of FCP X by pro editors?
2 . Anyone noticing any trends with pro editors regarding shifting towards Avid, Premiere, or some other platform?
Thanks for any info or insight.

kat.hayes wrote:
I work at a school and we have been teaching FCP 6 as part of a Multimedia program. Our goal is to provide training to students so they can continue on with a degree, or gain enough basic skills to get employment. I am now a bit concerned with FCP X. If the pro editors are not going to be using it then we will be doing a disservice to our students by continuing to teach it.
1. How can I find some type of data indicating the adoption rate of FCP X by pro editors?
2 . Anyone noticing any trends with pro editors regarding shifting towards Avid, Premiere, or some other platform?
Thanks for any info or insight.
Two gentlemen I work with who are the primary video editors at the local area PBS outlet gave FCPX a try... they ended up not being able to use it because of: 1. stability problems, 2. Tape is still used in the studio and the ability to sync/control a transport is not there (as I understood) 3. They had problems syncing audio.
4. One editor lost an afternoon's work after a crash.
They could see potential.. but in the end threw up their hands in desperation/disappointment.
If it's going to be the coolest thing out there... it's got a ways to go.

Where can I find blocks

Hey everyone,
I can not find blocks in the Labview 8.5 which i indicated in attachement view. If someone knew where are they in Labview?
Please for help
Marek

Thank you Christian,
FFT helped me a lot.
Have a nice work!
Marek

Can't find Led indicator

Similar Messages

Maybe you are looking for