Can't find my 3 Firewire External HD's on my desktop

I have a 17 in imac with 10.4 and for some strange reason all three of my external Firewire Hard Drive no longer appear on my desktop? No matter what I do they aren't there. I turn them off etc... reboot etc... nothing. My USB external HD shows up but not my firewaire. What can I do to get them back on? @ of the three are Western Digital... and one is a Accomdata.

How to fix the problem of a missing external Hard Drive (Firewire) after it vanishes from you desktop after installing 10.4.10 update.
I have a iMac PPC (Non intel). Aparently my system upated installed the wrong version of 10.4.10 and thus my external firewire hard drives a 320 GB Westerndigital My Book, and Acomdata 80 GB, and aWestern Digital 160 GB media center all vanished from the desktop.
The instructions below should be credited to several different people. I found various version of these steps in the Discussion. I combines a few of them into this one 10 step fix and it worked for me. I hope it works for you.
1) Shut down you computer
2) Unplug all peripherals (i.e USB and Firewire, I left computer power plug in as well as ethernet and Keyboard+ Mouse) and leave along for 30 Minutes
3) Restart holding down the Command (Apple) + Option + P + R keys for three startup bongs, then release the keys and your computer will start up as usual.
4) Verify and repair disk Permission using Disk Utility. (Several things were repaired here)
5) Instal 10.4.10 Combo PPC
6) Restart Again
7) Again repair Disk permissions (None of mine needed to be repaired fyi this time)
8) Unplug Power cable and Firewire cable from External Hard Drive (leave along for 1 minute)
9) Reconnect power to Firewire External Drive first then the Firewire cable to the drive second, then the firewire cable from the Drive to the computer last.
10) Turn on your Firewire Drive... you will head it spin up and eventually show up on your desktop just like it did before the 10.4.10 update.

Similar Messages

Can't boot from my firewire external drive

I have a 80 Gb LaCie firewire drive where I have installed (since Phanter) an operating system. All things were OK until I updated the system to OS X 10.4.10 in my G3 iMac (slot-loading). Since then I was unable to boot from the external drive. I had updated the drive's firmware, installed OS X 10.4.10 in it, but nothing has solved my issue. Can anyone help me with this?
Helder Monteiro
iMac G3 slot-loading Mac OS X (10.4.10) iBook G4 - 10.4.10

Helder,
I apologize if I sounded like I was finding fault with your use of English, which I think you use very well. My own abilities with any foreign language are embarrassingly poor ... & I'm not that great with my native English one either!
My concern was that we were not communicating well enough for me to understand your situation well enough to suggest anything that would not make things worse. I'm still not entirely sure of that but let me review what I believe it to be before proceeding:
You have a LaCie external hard drive that both your iMac & PowerBook recognize when either is started up from its internal copy of 10.4.10. With either one, the drive mounts & you can read & write files on the external without problems. The only problem is neither Mac will start up from the external drive, which has a copy of 10.4.10 installed on it in the same way as with your Mac's internal drives, that being booting from the Tiger installer disk, installing the base version of the OS on it & then updating it to 10.4.10 with some succession of Apple updates downloaded from Apple. You have also tried the PPC version of the 10.4.10 combo update. None of this has resolved the problem.
If this is all true & accurate, then I suggest you start by attaching the drive to one or the other Mac while booted normally & seeing if the external drive appears as a choice in System Preferences > Startup Disk. You do not have to select it if appears; the test is just to see if the Mac recognizes it as having a valid OS version. If it does appear in the list, hover the mouse pointer over it until a popup box appears, which will tell you the version of the OS installed.
If it does not appear in the list, it means there is no valid version of the OS installed. If it does, you could try selecting it & restarting, but I suspect from what you have said, it won't work -- the Mac will display a question mark for a while on startup, eventually give up on the drive & start from the internal one. (If so, don't forget to reset the startup disk to the normal one to speed up future restarts.)
Either way, launch Disk Utility & run the "Repair Disk" function on the external drive. If it finds anything wrong, continue to repeat the repair until it passes. If it reports failure, stop & report that here before continuing.
If the drive was recognized in the system preference, also run the "Repair Permissions" step. (if not, it is unlikely this will be an option.) If the drive passes both tests now, try booting from it again by whatever method you prefer.
If it does not work now, I think you will have to reinstall the OS. If you have room on the drive, an Archive & Install will probably work. If not, you will need to consider "cleaner" install methods, which we can discuss if you wish.
Good luck!

ITunes can not find my music on external hard drive

Had to redo my hard drive; had all music on external hard drive; copied iTunes folder onto external hard drive. Now that my desktop hard drive is clean, and new iTunes downloaded, it can not find my music on the external drive which I have always used. Is there some setting I am missing, do I have to copy music onto CPU?

Hold the SHIFT key while launching iTunes. You will get the option to navigate to the iTunes folder on your external drive. In the iTunes folder point it to the iTunes Library.itl file.

Can't find my files on external hard drive

My old computer (iBook G4) recently died, and I extracted the Hard drive from the computer. I got an external enclosure for the hard drive and got it up and running, and it shows up on my MacBook Pro.
My problem is that I can't find the files I really want, which were in the "Users" file. I can get to the Users file, and it says that there is 15GB in the folder, but when I open it there only like two files, and I even checked the hidden folders and they simply weren't there. Any ideas?

I'm guessing it's related to Permissions have you tried repairing them on the old volume ?
Did you try running Migration Assistant to see if it can see the content you want to bring over ?

Finder can't find / display files in external drive

Just upgraded to Lion on my MacBook, and Finder can't find / display files from my external thumb drive. I got message that the external drive was removed incorrectly, but I did not remove the thumb drive at all. After several attempts on removing and inserting the thumb drive, the files just didn't show up under Finder, and I have no way of working on files from external drive. I went to a Window based notebook and checked, the files are still in my thumb drive so they have not been corrupted, hopefully. How can I make Finder works with external drive in Lion ?

The problem I have was finally resolved by having a "clean" install for Lion, meaning to back up your hard disc, re-install Snow Leopard, then Lion. It's a lot of work but my MacBook is now working.

Lightroom can't find PSCS3 as an external editor

I recently upgraded to CS3. Now Lightroom can't find PS as the perferred external editor. I have tried a clean install. What gives?

Sorry, wrong FAQ. Try
LR Extras FAQ Compatibility Issues.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Can't find Imovie file on external drive

Hi,
I finalized a project and exported it to an external hard disk. Used ' share' and 'export using quick-time' and saved it on a hard disk. However I can't find the file anywhere on the hard disk. What am I doing wrong??

Hi
And the external hard drive is formatted as ?
for video - it must be Mac OS Extended (hfs) (mine are journaled)
UNIX / DOS / FAT32 / Mac OS Exchange works for most other things BUT NOT for video whatever editing tool used. iMovie, FinalCut etc doesn't matter - it just doesnt work but cut's up video in 4GB bit's that don't connect back or play.
Select the ext. HD icon (one click) then go up to file and down to Show Info and read
• Formatted as : nnnnnnnnnnnn
• Frames per second
What does it read ?
Yours Bengt W

Can't move files from my external hard drive to the desktop?

Hi folks, for some reason I am unable to copy files (irrespective of type) from my usb 2 external hard drive to my desktop. This is only a recent thing. Up until a few days ago I was able to transfer files back and forth without problem. Now it is only possible to move unto the harddrive and not the other way around. The harddrive is formatted in Mac OS Extended (journaled). I have tried running disk utility to repair the disc on both external and internal drives, and it advises me that no repairs were necessary. I have also checked the info and read and write is permitted and none of the files are locked. When I attempt drag a file off the harddrive to the desktop the cursor turns into a stop sign (circle with line through it). If I attempt to copy and paste, the file copies and then will not paste as "paste" does not appear in the contextual menu. I have had some limited success by dragging files off the external hard drive to the trash and then dragging then back out of trash unto the desktop. But this only seems to work sometimes?
It would be great if someone could suggest a reason and solution for this. Thank you in advance.
Jono

Sure sounds like permissions are goofed up somewhere. You weren't really clear about exactly what you had checked. Since you can copy TO the drive let's assume things are OK there. How about your Desktop folder? Did you check it with GetInfo to make sure you are the owner and have read and write permissions to the Desktop folder? I have seen these get messed up before.
Francine
Francine
Schwieder

I just bought a mini raid (1T) and can't find where to format it for use on my desktop iMac. Can anyone help?

i just bought a Raid Mini (1T) and can't find how to format it for my iMac OS X 10.8.5. Can someone help!?

It shouldn't need formatting. That should have been done to make the RAID. If you need to erase the RAID:
1. Open Disk Utility in your Utilities folder.
2. After DU loads select the RAID volume you wish to format from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.

I can't find the button to turn on Mobile link in desktop Adobe Reader

Hi,
I'm trying to turn on Mobile Link in my Win 7 Desktop Adobe Reading. But I just can't find where to turn it on. I already signed in the adobe reader.
On this webstie, it says, in the toolbar, click On. But there is no On in my toolbar. I tried everywhere, I just cannot find it.
Reader Help | Mobile Link: open once, read anywhere
Thanks

Hello,
Please follow the steps mentioned below:-
- Click the Open icon in the toolbar.
- In the toolbar, click ON.
You see a confirmation message that the feature is ON now.
Regards,
Nakul

Can't find the menu icon on my firefox or mozzila desktop. Where is it?

Need to turn off pop up blockers for some websites. Need to start with menu icon, can't find it, not on desktop.

Note that Firefox 24 doesn't have the "3-bar" Firefox menu button that came with the Australis user interface, but still have the orange Firefox menu button if the menu bar is hidden.
You can tap the Alt key or press F10 to show the Menu Bar.
*Tools > Options > Content
*https://support.mozilla.org/kb/Pop-up+blocker
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
Are you running a Firefox 24 ESR version or the bare Firefox 24 release?
You can find the full version of the current Firefox 32.0 release in all languages and for all Operating Systems here:
*https://www.mozilla.org/en-US/firefox/all.html
Firefox 24.8.0/31.1.0 ESR:
*https://www.mozilla.org/en-US/firefox/organizations/all.html

Updated to 10.1, now can't find projects/events on external drives

Yesterday, I blithely updated my Final Cut Pro X to version 10.1. Now I am totally lost...
I have gradually got used to the way FCP operates and now, all my Events and Projects are on an external drive, organised in a series of folders; current, finished etc.
When I started FCP yesterday, instead of finding any of my events and projects, FCP created a new Library on my HD.
I use a Macbook Air and do not use my small HD for FCP... how do I tell FCP where all my files are?
I can create a new library on my HD but if I try to move it to the external drive, it is copied and if I delete the original, FCP creates another one on the HD...
Getting lost and confused as there appears to have been a wholesale change of the basic way in which FCP functions.
I don't want to use my HD library as a 'working' library, not least because I don't know how to then find the files, to transfer them to the external drive to back them up.
Also, the HD is far too small for this purpose.
How do I go about persuading FCP to set up and then use libraries on my external drives?

tootallTV wrote:
Yesterday, I blithely updated my Final Cut Pro X to version 10.1. Now I am totally lost...
I have gradually got used to the way FCP operates and now, all my Events and Projects are on an external drive, organised in a series of folders; current, finished etc.
How do I go about persuading FCP to set up and then use libraries on my external drives?
You have to let your projects and events sit in the expected folders in order to have FCP X 10.1 update them to new libraries. If 10.1 sees old events and projects in your external drive (they need to be in the places older versions required them, i.e. at the root level in "Final Cut Events" and "Final Cut Projects" folders) it will offer to update them to a new library.
You should heed Philip Hoggetts' advice about using Event Manager X (now free) to help with managing the transition. You probably don't want to gobble up all your previous projects and events in one mega-library, but give it some form of organization. See here: http://www.fcp.co/final-cut-pro/tutorials/1304-upgrade-your-events-and-projects- to-fcpx-10-1-libraries-the-smart-way

ITunes can't find my tracks on external HDD on new install of windows 7?

Hi I have just installed windows 7 and am trying to move all of my music onto it..I save all of my music onto an external HDD and enable itunes so that it copies all my tracks onto there. I have exported the library file and loaded that into the new installation of iTunes on windows 7 however, loads of the files are missing and it came up with the error saying it couldn't find some of them. Why is this!? They are definitely all on my HDD as I use this with 2 pcs already and use both PCs with the external HDD to play music with no problems. So why is this happening?
Please help me out. Thanks very much

If you try to start iTunes with the external drive disconnected, iTunes will default back to the internal drive.
DO you know if you have your iTunes folder containing the library files on the internal drive or the external drive.
If the iTunes folder that you are using is on the internal drive then you need to set the location of the iTunes Music folder with Edit>>Preferences>>Advanced.
IF you had your iTunes folderon the external drive, hold down the shift key and start iTunes. Keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the external drive and choose iTunes Library.itl.

After reinstalling Leopard, iTunes can't find my music on external drive!

I reinstalled and updated Leopard and now would like to have my music back in iTunes. I know where the library is supposed to be, according to the advanced settings in itunes, but when I use this setting, iTunes doesn't import my music library. How can I fix this?

I may have figured it out. The library folder was right but the associations were not. I went to file and add to library and pointed that back to my library on my external and all the associations are being rebuilt. I hope this works. The files are being added to iTunes as I type.
Just an FYI if someone else runs into this issue.

I can not find my photos from external hard drive

I installed seagate external hard drive as my back up and time machine is on. I went to iPhoto and I am not able to see my albums. Did I lost all my pictures? How can I retrieve it and put them back on my iPhoto? The external HD is being used as the main portion and it shows that there is no photos. I am using iPhoto 9.6.1.

No idea what you mean by "main driver". Are you saying that you copied/backed up your internal hard drive to the Seagate and are now using that as your boot up?
Also do not know what you mean by "drag/copy master to iPhoto".
Your photos should be contained in your iPhoto library (your Home folder > Pictures)
To make it clear for us:
are you using your regular internal hard drive to work with?
do you have iPhoto there and is it working with your photos?
did you use Time Machine to back up your system to the Seagate?

Can't find my 3 Firewire External HD's on my desktop

Similar Messages

Maybe you are looking for