Can't find my DNS Primary and Secondary

Dear God, I need my DNS primary and secondary. I'm trying to set my xbox 360 up with it's own ip ect. I've gone to my airport to get this information but my DNS is the same as the IPv4 router. My xbox requires a DNS primary and secondary. The only thing I can find for my DNS is a Domain Name and Server address: 10.0.1.1 Do I put this number in my xbox for the DNS with no secondary?

I think your router is not configured properly for your internet connection. Router is not giving out a valid DNS to the computers because it cannot obtain it (dns) from the modem. Is your connection Cable or DSL?

Similar Messages

ITunes U course published but I can't see my school in the Primary and Secondary Schools list

I don't know how to contact the responsable of the iTunes U administration to send an email and change the name of my school.
I want to change Villaviciosa De Odón - Colegio Pax-Casvi into "Eurocolegio Casvi". Anyway, even my organization has been approved for courses publishing, I can't find the name of my school at the list of iTunes U "Primary and Secondary" schools.
If I go to https://itunesu.itunes.apple.com/audit/633264363, the course is in the iTunes U.

you might want to check on this possibility:
No music shows up in iTunes after upgrading

Magic Mouse Primary and Secondary Clicks Switched

Recently I picked up a Magic Mouse and have since found some very strange things that I don't know how to fix:
The primary and secondary clicks are switched. As in, under mouse settings when I select the secondary click to be on the right, only the primary click works on the right side and everything else is a secondary click. It is also very annoying because every time I have more than one finger touching the surface it counts as a secondary click. If anyone knows how to fix this I would really appreciate feedback.
I looked around in settings and couldn't find anything regarding this matter. I fiddled with some stuff but never got it working properly.
Feedback much appreciated!
--Justin

Looking at another thread in this forum, I see some people who had older apple mice installed before the magic mouse are having this problem with the magic mouse.
I had an older wireless mouse that would take right-clicks before I set up the magic mouse. Unfortunately when I connect the older wireless mouse I can no longer access it's preferences. It only gives me the preferences a generic one button mouse. Somewhere there must be some set of files I can delete and it will forget this old mouse.
I am pretty disheartened after a week of this. One of the benefits to a mac is that I shouldn't have to dig around removing drivers and such

P965 Neo-f - primary and secondary ide channel stops working after changing gpu

I just changed my graphic card from 4850 to 4870x2 and then my idd devices stopped working, and when I look in device manager the primary and secondary ide channel has a yellow exclamationmark over them. And the error msg is as follow: This device cannot find enough free resources that it can use. (Code 12)
And when I look on the tab resources the two I\O range tabs have a red cross like over them probably meaning there is something wrong. And in the column Conflicting devies list: Input/Output Range 01F0 - 01F7 not available.
Input/Output Range 03F6 - 03F6 not available.
What I have tried so far:
Updating the bios, looking for I\o range crashes and irq crashes, uinstalling and reintalling severals times. And when I change back to my old 4850 card the problems disappears straight away.
Any ideas?

Quote from: Crispin on 28-April-09, 20:15:49
Well reality says something different :D
And a reinstall fixed the problem. I find this post very amusing.
Ill bet your graphics doesnt even use its full potential on that board.
Me thinks it severly limited by the board and the cpu and imo a waste of a good graphicscard/money.
Its better to use only 2 slots of mem because of the strain you put on your memorycontroller when using 4 slots.
When running " double dualchannel" the memorycontroller can be overflooded when running too high mem.speeds, with errors and BSOD and crashes as a result.

Need help with sorting records in primary and secondary databases

Hi,
I would like to store data into primary and secondary db in different order. For the main primary, I want it to be ordered by login_ts instead of uuid which is the key.
For the user secondary database, I want it to be ordered by sip_user. For the timestampe secondary db, I want it to be ordered by login_ts.
This is what I have right now,
this is for main
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
this is for user search
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
this is for timestamp
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
but what I want is :
this is for main
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200004 login_ts=1264327618 logout_ts=
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200005 login_ts=1264327688 logout_ts=
this is for user search
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200004 login_ts=1264327618 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200004 login_ts=1264327688 logout_ts=
this is for timestamp
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200004 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200004 login_ts=1264327688 logout_ts=
Right now, I have:
int compare_login_ts(dbp, a, b)
     DB *dbp;
     const DBT a, b;
     int time_a = 0;
     int time_b = 0;
     time_a = atoi ( (char *)a->data);
     time_b = atoi ( (char *)b->data);
     return time_a - time_b ;
for the timestamp secondary, I set that compare function:
          if ((ret = (*sdb)->set_bt_compare(*sdb , compare_login_ts )) != 0){
Does anyone know how can I make it sorted according?

Hi,
The DB->set_bt_compare() is used to compare keys in Btree database. In the callback function, both the DBTs are key, but not data. Please refer to http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/dbset_bt_compare.html.
If you want any field in the data to be sorted, you might create a secondary index on it and define the compare function as you wish.
Regards,
Emily Fu, Oracle Berkeley DB

Setting up a primary and secondary Database in Oracle 10G

Hi Experts
can you please tel me the steps involved in creation of primary and secondary database? This is the first time i am going to configure this setup. Please provide your helping hands.
Thanks alot in advance,
Ram

Absolutely glad to help.
Step 1: Clarify what it is you are trying to build. Are you talking about a Standby Database? Perhaps Physical or Logical Data Guard? If so what protection mode? Stand-alone or RAC? Or are you just trying to dup an existing database on another server in which case you can just use RMAN.
Step 2: Go to http://tahiti.oracle.com and read the relevant docs
Step 3: Go to http://metalink.oracle.com and look at the Knowledge Base docs
If you have any question thereafter contact us and be sure to include your version number, not a marketing label. 10g is a marketing label that refers to everything from the 10.1 Beta through 10.2.0.4.

Is it possible to set primary and secondary display with 2 graphics cards?

I have an Early 2008 Mac Pro with two graphics cards and four monitors installed. Does anyone know how the computer (or more specifically Keynote) determines which is the primary display and which is the secondary?
Also is there any way to change the scheme?
What I am trying to do is switch the primary and secondary from the two monitors in my office to the monitor at the podium (would like it to become primary) and a vga projector (would like it to become secondary)
I bought the second graphics card so I wouldn't have to switch the cables back and forth three times a week. All the monitors work fine, it's just a matter of determining or changing primary/secondary
Thanks in advance

Thanks Malcolm
I got that far – The keynote manual says that the display with the menu bar is the primary display – that works out fine. The problem is that the manual says that the display without the menu bar is the secondary (or alternate). But there are three displays without the menu bar.
What I would like to find out is: is there a way to choose the display without the menu bar to be the alternate?
When I try various combinations, there seems to be no rhyme or reason as to which display is the alternate.
Thanks again for your response!

Set Primary and Secondary Interfaces

How can I set up primary and secondary network interfaces, so that it will automatically fallback to the second interface when I don't have the primary connected? I tether my phone to T-Mobile's network, but when I don't have it connected it want it to fall back to my wired connection.

Sorry, I only bump my own posts when I've added additional information to my last post and I see that no one has added anything to it in the past few days. I guess I would be better to create a new post instead of editing the old one.
I did give it a try and I have no real results to share. I created the two profiles in the /etc/netctl directory and named them as above (including Priority=1 for the tmobile connection and Priority=2 for the wired connection, as stated in the wiki entry even though man netfcfg.profile says it's only for wireless connections), then I enabled the service. There is the word "interface" after systemctl enable netctl-ifplugd@ which makes me think I should specify an interface but I have no idea which one to specify, so I just enabled it without it and it didn't complain. There's no way to start it. Both connections are enabled but it seems to default to the wired connection for some reason, when I want it to default to the tmobile connection and then fall back to the wired connection. Both are enabled and have IP addresses but nothing changes when I connect or disconnect my mobile data connection since it's using the wired connection.
edit: I just tried to enable the service using the interface name of my mobile data connection and it didn't change anything ex. sudo systemctl enable netctl-ifplugd@enp0s26f7u3
Last edited by brando56894 (2013-07-31 21:44:57)

How can we find the most usage and lowest usage of table in Sql Server by T-SQL

how can we find the most usage and lowest usage of table in Sql Server by T-SQL
The table has time stamp column
StartedOn datetime
EndedOn datetime

The Below query has been used , but the textdata column doesnot include the name of the table ServiceLog.
SELECT
FROM
databasename,
duration
fn_trace_gettable('F:\Program
Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\log_148.trc',
default)
WHERE
DATABASENAME='ZTCFUTURE'
AND TEXTDATA
IS
NOT
NULL
--AND TEXTDATA LIKE 'SERVICE%'
order
by cpu
desc;

I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s

I have check on my service provider about the correct APN settings, but unfortunately doesnt work still..

How can I synchronize my iPhoto events? my iTunes doesn't read them and with the app Images in the iPad I can only find Photos, Albums, Faces and Places, not Events.

How can I synchronize my iPhoto events? my iTunes doesn't read them and with the app Images in the iPad I can only find Photos, Albums, Faces and Places, not Events.

I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) . I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
Haha! I should have paid attention and read between the lines! My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do! I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy. I am now going through Photos and making Albums (of what used to be in my Events) ... maybe I'll get this finished before they do another non user friendly update!

Dialog box says-"Bridge encountered a problem and is unable to read the cache. ... purge central cache" For one, I can't find the central cache and two, I've purged the cache in bridge. Shouldn't that help.

Our Bridge has been acting very strange. It keeps giving a dialog box of "Bridge encountered a problem and is unable to read the cache. ... purge central cache" For one, I can't find the central cache and two, I've purged the cache in bridge. Shouldn't that help? There's just all kinds of weird stuff going on. I suppose it does have something to do with the central cache, so maybe someone can tell me where to find it.
When I use the burn/dodge tool sometimes it drags and staggers and takes forever to complete whatever I'm burning/dodging. When I try to delete an image from the dock, it won't disappear but it won't display either.
Any help would be appreciated.

The Central Cache is the Bridge Cache.
It's referred as the Central Cache to differentiate it from the individual folder's cache or even the individual image cache.

In which table can I find a project (CMOD)and enhancement (SMOD)??

In which table can I find a project (CMOD)and enhancement (SMOD)??
or else please suggest to me how I can find the project assigned to a enhancement?
Regards,
Shashank.

Shashank,
It looks like table MODACT makes the link between the project and the contained enhancements.
Regards,
Gary

How can i find out the resolution and accuracy of PXI-6602 module?

I have a 32 bit 8 channel PXI-6602 counter module. PXI card is interfaced to PC with MXI-4 link. How can i find out the resolution and accuracy of this system.What is the maximum accuracy and resolution i will get from this system. Because optical signal to cmos conversion signal is given as a input to the counter.

Hi chandhu,
Were you referring to the accuracy of the count register or the timing clock?
PXI-6602 specifications can be found in the NI 660x Specifications. The resolution of the count register is, as you’ve noted, 32 bits. This corresponds to a maximum count value of 4,294,967,295. As long as all of the edges are in accordance with TTL specifications, the accuracy of the count register is 100%.
On the other hand, the PXI-6602 baseclock accuracy takes on the baseclock accuracy of the PXI CLK 10 signal. Again, this is all found in the specifications.
You may also want to check out the NI 660x User Manual – it contains a lot of details on the operation of these counter/timer devices.
I hope this helps. Please post back if you have further questions.
Ed W.
Applications Engineer
National Instruments

HT1349 How can i find out the size and length of my playlist?

How can i find out the size and length of my playlist? Anybody?

It shows up in iTunes on your computer as seen here:

Can't find my DNS Primary and Secondary

Similar Messages

Maybe you are looking for