Can't find my model Satellite P100 model PSPE8U-07500M in the support list

The model munber shown on the bottom of my Satellite P100 labtop does not appear in the list of models on the Product Support page. What should I choose for a PSPE8U-07500M?

Please don't post the same problem multiple times. It leads to confusion.
See my reply elsewhere.
-Jerry

Similar Messages

Can't find my model Satellite P100 model PSPA3C-D300E in the support list

The model munber shown on the bottom of my Satellite P100 labtop does not appear in the list of models on the Product Support page. What should I choose for a PSAA3C-WD300E?

paulamcm wrote:
Wow - quick response again. I am impessed with this forum, if somewhat less so of Toshiba support.
Rincewind quickly confirmed that my P100 satellite labtop has no internal microphone. Well the guy at Canada service might have been trying to say that, as I asked in so many words. But after repeatedly cautioning that I would have to pay for his advise, seemed only prepared to suggest that the problem was probably the external microphone port. Yes, I have an external mic that has serves me well on other PCs --just not this one. OK, the headset speakers are are great and would be all I need if it weren't for Skype.
Basically I am stuck at the same point of not knowing whether there is a hardware fault in the mic port or I need some sort of driver. But I now have the phone number of repair shop and some reference numbers that will enable me to buy their support.
Since the speakers work, I doubt it's a driver issue, but it can't hurt to re-install the Conexant sound driver listed for your model and operating system (Vista or XP). If the microphone continues to be unrecognized, then it is likely a hardware failure. Toshiba does not do component repair, so the 'fix' is to replace the entire system board at a cost of $425 (US). This is madness, as far as I am concerned, but I don't make up Toshiba's business rules.
You may also, as a last resort, use the recovery media to put the laptop back to 'out-of-the-box' condition. This is the so-called 'gold standard' for hardware diagnosis. If the microphone is still not detected when plugged in after this, then it is hardware failure. Of course you need to have a verified backup before you even consider this rather extreme action.
I'd suggest that you look into one of the many USB microphones available rather than spend a penny on Toshiba's paid support, given what their response is likely to be.

How can you find out what number comment you are on within the comments list?

Hi everyone,
I have looked around but I cannot seem to find an answer to what seems a very simple request.
I have a PDF with over a hundred comments on it and I am making (slow) progress through the comments list. I would like to estimate how long this job will take me to complete by looking at the time I have spent on the job and a which comment number I am at (e.g. I am currently at comment 60 of 120 - half way through).
I cannot seem to find a way to do this without manually counting the number of comments I have been through already - which seems a watse of my time.
Is there an easy way to do this? I am sure I am missing something simple here.
Thanks in advance,
twordz

Sorry, I guess I mis-spoke. I thought that it will be numbered sequentially
for the entire document, but I guess it's per page.
The problem with numbering comments is that their internal order does not
necessarily correspond to their physical location in the file. The internal
order is based on the order in which they were created. Having said that,
it is possible to generate a summary of the comments with sequential
numbers for the entire file (not just page by page), but it would require a
custom-made script.

I can't find Siri on my iphone 5s when I hold the home key voice commands comes up and Siri isn't in my settings

I can't find Siri on my iphone 5s when I hold the home button voice control comes up. When I go to settings Siri is not there. Has anyone else experienced this?

Check Settings>General>Restrictions and see if they are turned on and Siri is restricted.

I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.

As you have discovered... you cannot use the install discs from another Mac...
Re the iMac running OS X 10 5 8... and for your New Mac...
See Here for keeping your Mac Happy...
http://support.apple.com/kb/HT1147
http://www.thexlab.com/faqs/maintainingmacosx.html
http://www.thexlab.com/faqs/performance.html

My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message.

My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

I'm getting prompted to update adobe acrobat 9.5.5 which I have deleted. I am currently using 10.1.13. It is still asking me to update 9.5.5 (can't find anything using it) I have tried to cancel the updates for 9.5.5 but it only recognizes the 10.1.13 ver

I'm getting prompted to update adobe acrobat 9.5.5 which I have deleted. I am currently using 10.1.13. It is still asking me to update 9.5.5 (can't find anything using it) I have tried to cancel the update prompts for 9.5.5, but it only recognizes the 10.1.13 version. Suggestions? Am I missing something? It's driving me crazy!

Hi ncm72,
Could you please let me know what version of OS are you using.
Also, go to Control Panel/System Preferences in Windows/MAC and check whether Acrobat 9 is shown under installed programs list.
You might also try running Acrobat cleaner tool to remove all traces of previous versions of Acrobat:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then, install Acrobat X again from the link mentioned below:
Download Acrobat products | Standard, Pro | XI, X
Let me know if this works.
Regards,
Anubha

1. Firefox Help 2. Search Refine your search Found 0 results for I have a lot of firefox downloads BUT can't find anything to click to see them - Where is the button that will show all Firefox downloads? in English in English

1. Firefox Help
2. Search
Refine your search
Found 0 results for I have a lot of firefox downloads BUT can't find anything to click to see them - Where is the button that will show all Firefox downloads? in English in English

Tools > Downloads or {Ctrl + J} will open the Downloads window

The Calendar icon has disappeared from my dock and I can't find a way to restore it or to download the Calendar app. Help please.

The Calendar icon has disappeared from my dock and I can't find a way to restore it or to download the Calendar app. The iCal app is not in my applications folder. Help please.

Do you have Time Machine enabled. If so, go back through your previous months until it features in your Application folder. Then restore.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

: Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
The FP-1000/1001 seri
al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
Regards,
Aaron

I downloaded Premiere with no trouble, but can't find a setup or install file. What's the deal?

I purchased a one year membership a few months ago, and installed Lightroom and Photoshop without any troubles. I now need Premiere for my new classes, so I downloaded it with no trouble. However, I can't find an install or setup file. What's the deal? I've paid for software that I can't install, and I need it for class which started about a week ago. Help!

Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
-Install, update or UNinstall, and launch after installing

Adobe premiere can not find any module capable of playing video. Update the video drivers and start again.

Adobe Premiere can not find any module capable of playing video. Update the video drivers and start again.
I've tried all the options suggested and the problem continues.
What else can I do?
Note: I had already worked before.
Windows 8.1
Notebook i7, 8M memory, video card Nvidia (updated).
Adobe Premiere Pro 2014
Please help me. Thank you.
mailto: [email protected]

Here is a link to an Adobe TechNote about the same issue with an earlier (much earlier!) version of Premiere Elements and Windows XP.
http://kb2.adobe.com/cps/324/324938.html
I'll leave it to Steve and Bill as to whether the fix offered in the link for Premiere Elements 2 would still be applicable to your version of Premiere Elements.
Hope this is of some assistance.

HT5569 4S phone to IOS 7.1.2 and lost my wi-fi. The wi-fi is on, but can't find ANY networks. I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 an

I updated my 4S phone to IOS 7.1.2 and lost my wi-fi. The wi-fi is on, but can't find ANY networks. I have been through all the steps, from turning the phone on and off, resetting the network settings, resetting the whole phone, redownloading 7.1.2 and lastly going to the Apple store for help. They tried all the exact same steps I did, took the phone apart and looked at and said it is in "pristine" condition. They have no idea why it isn't working, but they could offer to sell me another phone. This is extremely annoying! They claim it has nothing to do with the update to 7.1.2, but that is when I lost the wi-fi, so it has to be related!

My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again...

After I connect with my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.

After I connect my iPhone (3GS 5.0.1) to any Ad-hoc wireless Network then walk away out of the reach of my wifi network, my iPhone can't find any wifi Network afterwards, only by turning off the iPhone completely and turning on again.
switching off wifi and on again or going into airplane mode did't help!
This problem happens only with ad-hoc wifi networks not with normal ones.
(Ad-Hoc network was created on XP Computer)

Welcome to Apple Discussions
Sorry, but the 169.x.x.x IP address is internally generated by the iPod (and iPhone) and indicates that a network has been detected but no IP address has been issued. Your friends iPhone was not connected to your ad hoc network either - it connected to the internet through the 3G network.
You should read through the Vista help screens on ad hoc networking for some insight how this works. You should be able to get some ideas there.
In the mean time, $40 or less will buy you a very capable wireless router with four Ethernet ports and will simplify your network tremendously. Having used Windows ICS for a long time, the addition of a router and a real network simplified things so much.

Can't find my model Satellite P100 model PSPE8U-07500M in the support list

Similar Messages

Maybe you are looking for