Can't find Network using a Linksys WUSB54G Wireless-G USB Adapter with a linksys WRT150N router????

Hello.....I just recently bought a linksys WRT150N router and am having problems connecting a computer that uses a Linksys WUSB54G Wireless-G USB Adapter. This computer's operating system is windows 2000 and it cannot find the network I setup.....Even when I double checked that the router was in mixed mode.....Can anybody help?

I am having a similar problem with my WUSB54GC adapter connecting to my WRT54G router 100 feet away with only a single stud wall in between. Sometimes the computer connects automatically and sometimes I have to restart windows or use the repair connection wizard to get the computer to connect. Using Windows XP and Mixed infrastructure network with SSID broadcasting disabled.
Message Edited by HOOfan_1 on 05-29-200709:03 PM

Similar Messages

How to use a high power wireless-n usb adapter

I recently purchased a kinamax high power wireless-n USB 2.0 adapter to boost my wifi signal. The data range is 802.11n. The only problem is that I can't use the adaptor. The box says that the supported OS is MAC OS X. But when I connect the adapter nothing happens. There is not even sign that the USB adapter is connected. Can anyone help me?

Hi Kelvin,
I understand that you want to control pins on your serial port using LabVIEW. Since you are using Windows XP, only LabVIEW version 7.0 will be able to control the pins. The pins can be controlled by modifying the values of the access registers that windows associates with each pin. If you are using LabVIEW 7.0, then the VI's located on the Funtions >> Advanced >> Port I/O palette should help you assign values to the proper pins.
This information can also be found on another discussion forum thread located at the following url:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000438A0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Thanks for contacting NI, and I hope this helps.
Marcus G.
National Instruments

Where can I find a useful "user guide" I can print for an ipad2

Where can I find a useful "user guide" I can print for an ipad2

Be green and don't print! The iPad user's guide is in the bookmarks section of Safari. But, because you'll be reading it in Safari, you have to be in a wifi area or using the 3G network. However, you can download the .pdf and open it in the free iBooks reader. Then you have it with you wherever you go and don't have to be on the internet to read it.

HT2712 Network ip address keeps changing and for some reason I can't find the right settings. The diagnostics says to check with my network administrator, but idk whom that is being at a motel and all. I have made. New locations, & changed the ipv4 addr

Network ip address keeps changing and for some reason I can't find the right settings. The diagnostics says to check with my network administrator, but idk whom that is being at a motel and all. I have made. New locations, & changed the ipv4 address. Help plz

Hmmm, is Network set to using DHCP?
Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select your access point and Remove your access point with the minus button.
Launch your keychain access in Utilities and delete your access point keychain entry.
Reboot
Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.
Instead of joining your network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed

I'm getting prompted to update adobe acrobat 9.5.5 which I have deleted. I am currently using 10.1.13. It is still asking me to update 9.5.5 (can't find anything using it) I have tried to cancel the updates for 9.5.5 but it only recognizes the 10.1.13 ver

I'm getting prompted to update adobe acrobat 9.5.5 which I have deleted. I am currently using 10.1.13. It is still asking me to update 9.5.5 (can't find anything using it) I have tried to cancel the update prompts for 9.5.5, but it only recognizes the 10.1.13 version. Suggestions? Am I missing something? It's driving me crazy!

Hi ncm72,
Could you please let me know what version of OS are you using.
Also, go to Control Panel/System Preferences in Windows/MAC and check whether Acrobat 9 is shown under installed programs list.
You might also try running Acrobat cleaner tool to remove all traces of previous versions of Acrobat:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then, install Acrobat X again from the link mentioned below:
Download Acrobat products | Standard, Pro | XI, X
Let me know if this works.
Regards,
Anubha

My iPhone 4 can not find network after updating to 7.0.6

my iPhone 4 can`t find network after updating to 7.0.6. i`ve reinstalled system, but nothing`s really changed.

iPhone 4S: I have the same problem. After updating to iOS 7, wifi worked for some time, and then it stopped working. I can't even enable wifi. I just updated to iOS 7.0.2 and it didn't help at all.

Where can I find a bunch of Multisim sample circuits online to play with/download?

Where can I find a bunch of Multisim sample circuits online to play with/download? The program (Multisim) only comes with a few samples. Would just like to check out a lot more. Thanks a bunch,
Warm regards,
Derek

Hi Derek;
Go to this website: www.pearsonhighered.com/floyd
This is the companion website for the books written by Thomas L. Floyd and every book comes with lots of circuits that you can use.
If you are a beginner then I would suggest to start with AC/DC Fundamentals.
I hope this helps.
Good Luck

I have a mac running osx 10.4.6. Were can I find a earlier version of firefox that will be compatable with my OS?

Firefox version 7 will not runn on my system. I need to know how I can get an earlier version for download so I will be able to use firefox as my default browser.

Does anyone have an answer? Where can I find a earlier version of Firefox that will be compatible with OS10.4.6 ?

I have a non intel G5 and would like to download i-tune songs that I have recently purchased. I have tried everything and can't find the downloads. Did this G5 just become obsolete with itunes? If not what is the problem?

I have a non intel G5 and would like to download i-tune songs that I have recently purchased. I have tried everything and can't find the downloads. Did this G5 just become obsolete with itunes? If not what is the problem?

You can do it with Leopard but it depends upon the iTunes version which you did not reveal. Also make sure you are looking in the right place for purchases.
Consider buying a backup drive so you do not need to do this again. If you are going to run old hardware and software you need to live differently because yes, at some time you will find your version of iTunes no longer works. You're lucky it still works with Leopard. As you can see, some versions still work with the iTunes Store but not for repeat downloading.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "... back up your iTunes library. " (http://support.apple.com/kb/ht2519).
Additional tip at https://discussions.apple.com/message/24176756#24176756
Select the iTunes Store on the left side of iTunes if you have the sidebar displayed, or with the button at the top right.
Click on Purchased on the right side under Quick Links (see https://discussions.apple.com/message/26364186#26364186)
You can re-download your available previous purchases.

Before I downloaded Lion every time I would upload a pic from iphoto there would be two files. One that was 1.8MB and another that was 50KB. Now I can only find the 1.8MB one. Did this option disappear with Lion?

Before I downloaded Lion every time I would upload a pic from iphoto there would be two files. One that was 1.8MB and another that was 50KB. Now I can only find the 1.8MB one. Did this option disappear with Lion? I really need this option!

Sorry but this is not clear.
When you would "import" what?
two files would show up in "images".
Do you mean in the All Images search in the Finder?
IF so:
1.Never interact with photos that are in iPhoto via the All Images Search. This does not understand the iPhoto Library and it's very, very easy to damage the library this way.
2. What you were seeing was the original file you imported and the thumbnail created by iPhoto for viewing on the iPhoto Window. That thumbnail is not designed for user access.
What are you trying to do ultimately?
Regards
TD

HT3775 I'm using version 10.7.5 OSX. I can't play or use the normal AVI recently. Some problem with (codecs version incompatible with OSX) Please give me some help. I'm in Vietnam and to have a real place to have stuffs from Apple is ****-

I'm using version 10.7.5 OSX. I can't play or use the normal AVI recently. Some problem with (codecs version incompatible with OSX) Please give me some help. I'm in Vietnam and to have a real place to have stuffs from Apple is ****…

I would recommend that you download and install the excellent and Free "VLCPlayer for Mac", which reads many more types of files for video than Quicktime Player:
http://vlc-media-player.en.softonic.com/mac

I have 2009 IMAC installed with latest OS X 10.8 Mountain Lion. But I don't have Ilife ,I can't find from my system.OS X 10.8 normally coming with Ilife ? It's true. Then how can I find Ilife?

I have 2009 early Imac installed with latest OS X Mountain Lion. But I can't find Ilife from my system. Normally Mountain Lion coming with Ilife loaded, it's true? But I can't find Ilife applications. Pls, advice me.

It is my understanding that iLife is not included with Mountain Lion, but with a new Mac... You only get it pre-installed as part of a hardware purchase.
I am not an expert, but hopefully someone else will be able to confirm this, and if correct it means you wil have to purchase iLife seperately from the Mac App Store.
Sorry!
Update: If you visit the online Apple store and start to order a new Mac, you will see that iLife is not included and can be added as an extra purchase.
You will have to purchase this seperatley.
Message was edited by: Ben Yafai

Can not find Acrobat and Illustrator on my computer after installing it with CC-App

Can not find Acrobat and Illustrator on my computer after installing it with CC-App. The CC-App show the programs as installed, but they are not seen in "programs and funktions" or on other places on my computer.

Hi Martin,
Check this link and see if it helps: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html, maybe the products weren't installed properly.
Thanks!
Ankit

TC wireless failed; Use as USB backup with Netgear R7000 as router?

TC wireless failed. Can TC (500Gb hard drive) be used as USB backup with Netgear R7000 as router or to nearby iMac?

No, you cannot use the USB to access an internal disk in the TC.
If its wireless has failed the rest will not be far behind.. the 500GB is Gen1 or early Gen2.. and they are simply failing in numbers.. you can probably repair it with a power supply, I kind of doubt the wireless itself would die but is symptomatic of failure of the unit as a whole.
If you want a backup just buy a large USB drive and plug it straight into the iMac. Choose the fastest interface you can afford.. ie firewire 800 is still head and shoulders better than usb2.. but usb3 or thunderbolt in the later machines are a big improvement.. with the later costing an arm and leg still, with most of the bits in between.

Linksys Wireless-G Notebook Adapter with SpeedBooster

Anyone get the Linksys Wireless-G Notebook Adapter with SpeedBooster WPC54GS to work with their Mac?
Mac OS X (10.4.8) iLife 6

Yes. I have Linksys WPC54GS version 1.1 (with the Broadcom chipset) running OS 10.3.9. I believe version 2.0 also uses the Broadcom chipset, but I do not know if that is the same for version 2.1.
BTW: I originally used a Linksys wireless router but a year ago changed to the Belkin Pre-N Router F5D8230-4.

Can't find Network using a Linksys WUSB54G Wireless-G USB Adapter with a linksys WRT150N router????

Similar Messages

Maybe you are looking for