Can't find original white headphones..(Help)

I've been looking all over the apple site trying to find the orginal white headphones that came with my i-pod mini. It keeps showing me the in-ear headphones, but I dont want them I wan't the orginal's.
I've also looked at my local electronic stores, but they just tell me to look on the apple web site.
What do I do???

If you really deleted the files, there is little hope, but data recovery.
If you have you not restarted your mac, since you imported the images, don't do it., before checking the caches. Sometimes Aperture will write to the $TMPDIR, if the drive it trying to write to gets offline during import.
Check these system folders, if youcan find any cr2 files:
Quit Aperture.
Open a Terminal window and enter the following two line:
open $TMPDIR
This will open a Finder window with cryptically named folders. Dive into them and look for Aperture's Media cache folder. Are there any image files in the folder "com.apple.Aperture"?
Sometimes Aperture will write to that directory, if it cannot write to the Aperture library.
Also check the following location:
open /tmp
Can you find any images in the these two caches?
When I returned to Aperture, it shows a thumbnail of the file, but yellow exclamation point saying ORIGINAL IMAGE NOT FOUND!!! I'm guessing Aperture tried saving original files to the SD card and NOT my hard drive.
Are you using Aperture 3.5.1?
This version will tell you, where the missing originals should be, when you select the thumbnails and use the command "File > Show in Finder". When I try this, I get a panel showing the path to the missing original. Does that really point to a file on your SD card?
What are your Import settings in Aperture? What is set in the "Store files" option? "In the Aperture library " or something else?
-- Léonie

Similar Messages

T-Bird requires new install but can't find original mail account - help!

I've been running ThunderbirdPortable for about 3 months and now, all of a sudden the executable won't start. The message recommends that I re-install which I did in the same directory as the original (as recommended) but when I start the new executable it does not link to my original mail account.
How can I "tell" my new installation where my original account data can be found.

I've been running ThunderbirdPortable for about 3 months and now, all of a sudden the executable won't start. The message recommends that I re-install which I did in the same directory as the original (as recommended) but when I start the new executable it does not link to my original mail account.
How can I "tell" my new installation where my original account data can be found.

HT3819 My old computer is broken so bought new one.When logged into itunes had to reset password etc.Anyway once on all playlist were different and can't find original stuff.I thought I would just log on and it would be my playlists but not to be.Help ple

My old computer is broken so bought new one.When logged into itunes had to reset password etc.Anyway once on, all playlists were different and can't find original stuff.I thought I would just log on and I would carry on as usual but not to be.Help please.

Donmcp wrote:
I thought I would just log on and I would carry on as usual
Why would you think this? That's an ignorant assumption to make.
Your media is only where you put it.
Either move it from the old computer or restore it from the backup of the old computer.

IMovies - Export Using Quicktime - can't find the finished file - help please!

Please help. I exported several imovies projects to a designated file on my mac, using Share - Export using Quicktime and then I uploaded them to Youtube.
I did this successfully several times, now when I export a project, it takes about 45 minutes to export it, then I can't find them anymore.
I have read several threads, which suggest looking in the iMovie projects folder and locate your project Right-click to get to "show package contents" and they are not there.
It looks as if it goes through successfully, no errors but this is so annoying as I am wasting hours sharing and then can't find it. Please help anyone.
Thanks

Hi Gee
I originally spent about 10 hours uploading 3 clips directly from imovies to Youtube to a private channel and they couldn't find any signs of my 3 uploads. So I read threads that said export to Quicktime from imovies and then load them to Youtube that way. I did that for 3 short, 10 minute videos and it worked fine. It changed the thread to .mov and it worked.
Then perhaps I changed something (not sure what) but now when I use Export to Quicktime, it spends 1 hour or so doing the motions and completes but when I go to the allocated folder to retrieve it. It can't be found. I read threads and this seems to be a regular occurrence but I haven't read any replies that has solved this issue.
Hope that's clearer.

Where can I find a white paper describing the resampling algorithm?

Where can I find a white paper on the resampling algorithm?

There are some basic concept introductions about resampling in a shipped document, which is located at National Instruments\LabVIEW 2012\help\lveptconcepts.chm
The resampling algorithm is widely used in many other areas, whose signal processing principles are similar, such as the below reference,
https://ccrma.stanford.edu/~jos/resample/

How can I downgrade iOS 7.0.4 down to iOS 6.1.3? I know there is no Apple licensed way to do so, but can someone find a software that helps downgrade?????

I know there is no Apple licensed way to do so, but can someone find a software that helps downgrade?????
Please help me.
Here is my list of things that suck about iOS 7:
-motion sickness (i know how to fix that, i already did)
-buggy
-glitching out during games
-apps shut down on me while i use them
-battery life (apple says) lasts for 48 hours. for me it lasts 2 hours
-no way to downgrade
-terrible background choices (kinda lame, but still)
-apps are neon (ick)
-terrible design layouts
-safari ***** (as usual) with its search bar functioning as web address search as well
-mail badge says i hate not read mail when i have
-passcode can be surpassed
-game center push notifications will not go away
-will not sync with my mac
APPLE PLEASE LET US DOWNGRADE

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback.

I tunes can't find original song files of all my songs. How do I fix this?

I tunes can't find original song files of all my songs. How do I fix this?

Itunes stores ripped cds in the 'itunes' folder called 'itunes music' which under normal installation should reside into your 'My music' folder. Your music folders on the DVD then have to be copied into the 'Itunes music' folder for itunes to find it.
The tracks with the exclamation marks have registered with the incorrect location into the library. You can do two things:
Either search in the folder where you copied them from the DVD at the earlier step described above which means that you will have to do this for every single track, or the fastest way, delete all the incorrect entries and re-import by drag and drop into library the folders with the music you want to show in the library.

My itunes won't open as it says it has been installed incorrectly. It can't find MSVCR80.dll. Help!

My itunes won't open as it says it has been installed incorrectly. It can't find MSVCR80.dll. Help!
I tunes was not installed correctly . Please reinstall. Error 7 (Windows error 126)
i have tried uninstalling itunes and reinstalling but itunes won't work at all!
AARRGH

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I backed up my phone before updating the software, but now I can't find my pictures. Help!

I backed up my phone before updating the software, but now I can't find my pictures. Help!

Please pardon the intrusion…
Hi, Chris!
Congratulations on advancing to Level 6!
At the Water Cooler in the Level 6+ Lounge, we are throwing virtual confetti in celebration of your attainment of Level 6-dom. Would you care to join us at the Water Cooler?
Towards the bottom of the index on the Apple Support Communities Home Page you soon will find the Lounge link available to you. It should work for you within the next 24 hours if all goes as it should.
Hope to see you there soon!

HELP!!! Aperture can't find original files!

Help!!! I imported a 64 Gig SD Card into Aperture for an engagement shoot. It imported the files, about 2,000 CR2 files. I had to clear the SD card to do another shoot. When I returned to Aperture, it shows a thumbnail of the file, but yellow exclamation point saying ORIGINAL IMAGE NOT FOUND!!! I'm guessing Aperture tried saving original files to the SD card and NOT my hard drive. When I was clearing the card, highlighted the files and put them in the trash on my IMAC. Then I emptied the trash. I also re-formatted the card on my Canon. So... I have downloaded Stellar Phoenix Data Recovery, Data Rescue 3, and ISkysoft Data Recovery to see if they will either recover files I emptied from my trash, OR recover the files on the SD card. I can't find the files! To this point, this my best work as a photographer. I'm mortified! If someone will help me I will be indebted to you forever. Thank you!

If you really deleted the files, there is little hope, but data recovery.
If you have you not restarted your mac, since you imported the images, don't do it., before checking the caches. Sometimes Aperture will write to the $TMPDIR, if the drive it trying to write to gets offline during import.
Check these system folders, if youcan find any cr2 files:
Quit Aperture.
Open a Terminal window and enter the following two line:
open $TMPDIR
This will open a Finder window with cryptically named folders. Dive into them and look for Aperture's Media cache folder. Are there any image files in the folder "com.apple.Aperture"?
Sometimes Aperture will write to that directory, if it cannot write to the Aperture library.
Also check the following location:
open /tmp
Can you find any images in the these two caches?
When I returned to Aperture, it shows a thumbnail of the file, but yellow exclamation point saying ORIGINAL IMAGE NOT FOUND!!! I'm guessing Aperture tried saving original files to the SD card and NOT my hard drive.
Are you using Aperture 3.5.1?
This version will tell you, where the missing originals should be, when you select the thumbnails and use the command "File > Show in Finder". When I try this, I get a panel showing the path to the missing original. Does that really point to a file on your SD card?
What are your Import settings in Aperture? What is set in the "Store files" option? "In the Aperture library " or something else?
-- Léonie

IPhoto can't find original photos, but I can!

When I launch iPhoto, I get error messages telling me photos are missing, and asking if I want to "find original" or cancel. If I try to find the original, I can't navigate into the library file itself, even though a search in spotlight reveals the missing photo is inside the iPhoto library bundle itself.
So I hit 'cancel' but I have to do this dozens of times each time I launch iPhoto, which is a huge hassle.
The 'missing' photos show up as blank thumbnails with a dotted white line around them in the photo viewer. If I scroll around iPhoto's viewing pane, the same message appears constantly.
I have rebuilt the library, repaired disk permissions, and even tried reverting to an older library from backup. No dice.
I'm out of ideas, other than exporting all the photos and then creating a new library and reorganizing everything. Seems like a huge hassle for 9000 photos, though.
Any help is greatly appreciated.

Thank you for the insights, Terence. I'm glad I didn't export then re-import.
I did try iPhoto Library Manager before posting here, but it told me it couldn't rebuild the database because it was corrupt! Yikes.
Okay, so I did what someone suggested on another thread, and tried to identify all the 80 or so photos that were supposedly 'missing'. I wrote down the name of every photo on a text edit doc.
Then I did something strange that seems to have worked: I went to Spotlight, and searched for one of the image names. I found it inside the iPhoto library. (I'm not sure why you can't navigate to photos from inside iPhoto, but you can from Spotlight - note, you can't find them in any other finder window, just Spotlight).
I dragged the culprit file to my desktop. Then, when the alert came up again, I used File > Reveal in Finder to navigate to the photo...interestingly, iPhoto then pointed to the original location of the missing file...I then dragged the photo from my desktop back into iPhoto's library via the Finder. Voila, the photo was re-linked.
But here's where it gets interesting. Somehow other photos got re-linked, too!
I quit the program, and the same problem reoccurred. So I took the steps again above, but this time I did something slightly different afterward.
I went to the TextEdit doc, and I found each and every photo, and dragged it into an album I'd created (I called it something like "Photos to Fix" or something). I then went to the Trash, and found some broken aliases in there, too. I emptied the Trash, after clicking 'cancel' on each error message. Then, I quit and restarted iPhoto several times. The problem is gone! I then moved the photos out of the "Photos to Fix" album, and the problem has not returned.
In short:
- Find a broken photo in iPhoto, note the name
- Navigate to the photo in Spotlight (not finder)
- Drag it out of the iPhoto Library and onto the desktop
- Go back to iPhoto
- Select "Reveal in Finder" on the broken thumbnail
- iPhoto will go to the location the photo USED to be
- Go back to Finder
- Drag the photo back into its old location
- Go back to iPhoto
- Move that photo, and any other problem photos, to a new album
- Empty Trash if there are any problem files there, too
- Restart iPhoto
- Problem solved
That's what worked for me, though I admit it is wonky and illogical. Maybe someone can shed light on why this worked.

Can't find original serial number - have update numbers, can't open Aperture on new mac

I just bought a new apple pro and moved over aperture from my imac. When I try to access aperture on the tower, it asks for my aperture 1 serial number which I cannot find. (I have the update number.) I no longer have the box. I registered when I bought my first aperture, and that number must be in my system. I still have the imac. Where can I find this number?

The information may be in your Apple Store account.
Just today, I was in the same situation and having received Aperture 1.5 as a gift, I could not provide a proof of purchase (see http://support.apple.com/kb/HT1861).
The AppleCare representative sent me to my Apple Store account (store.apple.com - "Account" is at the top right) since I had bought the Aperture 2 and 3 upgrades online. There, I clicked on "Downloadable software puchases" and I got the list of software including the serial numbers. I entered the v3 upgrade serial number first and then the v2 upgrade and it worked -- even though I did not have the original serial number for v1.5.
Hope it helps.

When i play a song,it says can not find original, and will not play

whAT HAPPEN TO ALL MY MUSIC

Hi krisoffer,
If iTunes is saying it can't find the original, you may find the following article helpful:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Regards,
- Brenden

Can't find original iTunes library...

I have two iPods (both Nanos - one 6th generation and one 1st generation) and recently used method three on this page (http://support.apple.com/kb/ht1495) to create a second iTunes library for my second device. I followed directions to a tee and now can only find the new library. Any advice? Like many of you, I'm sure, my original iTunes library contains tons of paid-for downloaded songs which I would hate to lose. I wish I were more tech-savvy!!! Help!

How did you save this file? iTunes doesn't actually have a save file feature so I am not sure what you did.

Java.util.MissingResourceException: Can't find bundl :ERROR plz Help

hey guys am trying to connect to my data base and view data toa jsp page but i got this error :
Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: java.util.MissingResourceException: Can't find bundle for base name DataBase, locale en_US
root cause
java.util.MissingResourceException: Can't find bundle for base name DataBase, locale en_US
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
here is the code database _proper
drivername=oracle.jdbc.driver.OracleDriver
dataSourceName=jdbc/orcl/WOH
dsLookupPrefix=WOH.getstring("dslookupprefix");
user=SYSTEM
password=SYSTEM
location=192.168.1.3
port=1521
sid=ORCL
and here is the Dao connection class
package version.dao;
import java.util.*;
//to provide JDBC classes
import java.sql.*;
* @author freddy
public class DAODirect {
* Insert the type's description here.
* Creation date: (12/25/2006 12:13:56 PM)
* @author: Administrator
     private Connection connection = null;
     private Statement statement = null;
     private String driverName =null;// "oracle.jdbc.driver.OracleDriver";//null;
     private String url =null;//"jdbc:oracle:thin:scott/tiger@localhost:1521:ORCL";//null;
     private ResultSet rs = null;
     private String columnNames[];
     private int columnCount;
     private Object[] record;
     * PFSDataBase constructor comment.
     public DAODirect() {
          super();
          ResourceBundle database = ResourceBundle.getBundle("DataBase");
//1 get the driver name
          driverName = database.getString("drivername");
          String user = database.getString("user");
          String password = database.getString("password");
          String location = database.getString("location");
          String port = database.getString("port");
          String sid = database.getString("sid");
//String dataSourceName=database.getString("dataSourceName");
//2- get the Connection url
          url =
               "jdbc:oracle:thin:"
                    + user
                    + "/"
                    + password
                    + "@"
                    + location
                    + ":"
                    + port
                    + ":"
                    + sid;
          System.out.println("++++++++"+url);
System.out.println("++++++++"+url);
     public void closeStatement() {
          try {
               if (statement != null) {
                    statement.close();
                    statement = null;
          } catch (Exception e) {
     public void commitDB() throws Exception{
          connection.commit();
     public boolean connect() throws Exception {
          try {
               if (connection == null) {
//1- loading of JDBC Drivers
                    Class.forName(driverName);
                    System.out.println(url);
//this line =conn = DriverManager.getConnection(
// "jdbc:oracle:thin:@noizmaker:1521:osiris",
// "scott", "tiger");
//2- Establish Connection
                    connection = DriverManager.getConnection(url);
                    return true;
               } else {
                    throw (
                         new Exception("connection is not disconnected, you have to disconnect this connection before reconnecting it again"));
          } catch (SQLException e) {
               e.printStackTrace();
               throw (new Exception("Unable to connect to database,Error Loading Driver"));
     public void createStatement() throws Exception {
          if (statement != null) {
               closeStatement();
          if (connection == null) {
               throw (new Exception("database is not connected"));
          statement = connection.createStatement();//3-bulit_in funnction that create and send sql statment
     public void disconnect() throws Exception {
          if (connection != null) {
               try {
                    connection.close();
                    connection = null;
               } catch (Exception e) {
               //isConnected = false;
          } else {
               throw (new Exception("can not disconnect database"));
// ResultSet is: A table of data representing a database result set, which is usually generated by executing a statement that queries the database
     public ResultSet execute(String query) throws Exception {
          if (connection == null) {
               throw (new Exception("database is not connected"));
          if (statement == null) {
               throw (new Exception("statement is not created"));
          return statement.executeQuery(query);//bulit_in funnction that 4-execute given sql statment
     public void getColumnNames(ResultSet result) throws Exception {
          try {
//An object that can be used to get information about the types and properties of the columns in a ResultSet object.
               ResultSetMetaData resultsMetaData = result.getMetaData();
               columnCount = resultsMetaData.getColumnCount();
               columnNames = new String[columnCount];
               for (int i = 1; i < columnCount + 1; i++) {
                    columnNames[i - 1] = resultsMetaData.getColumnName(i).trim();//trim to remove whaite space
          } catch (Exception e) {
               throw (new Exception("Result Set Columns " + e.getMessage()));
     public Connection getConnection(){
          return connection;
     public void rollBack() throws Exception{
          connection.rollback();
     public Vector rsToVector(ResultSet rs) throws Exception {
          getColumnNames(rs);
          Vector resultSetData = new Vector();
          resultSetData.addElement(columnNames);
          try {
               this.record = new Object[columnCount];
               while (rs.next()) {
//ave each raw
                    Object[] record = new Object[columnCount];
                    for (int i = 1; i < columnCount + 1; i++) {
                         Object entry = rs.getObject(i);
                         record[i - 1] = entry;
// here we print the whole tabel after we save each record in record[]
                    resultSetData.addElement(record);
               return resultSetData;
          } catch (Exception e) {
               resultSetData.clear();
               throw (new Exception("Result Set : " + e.getMessage()));
     public void setAutoCommit(boolean commitType) throws Exception{
          connection.setAutoCommit(commitType);
     public boolean update(String query) throws Exception {
          if (connection == null) {
               throw (new Exception("database is not connected"));
          try {
//create query and execute it
               createStatement();
               statement.execute(query);
               return true;
          } catch (Exception e) {
               throw (
                    new Exception(
                         "Error in manipulating query :" + e.getMessage()));
          } finally {
               closeStatement();
* To change this template, choose Tools | Templates
* and open the template in the editor.
package version.dao;
import java.sql.ResultSet;
import java.sql.Connection;
import java.sql.Statement;
import java.sql.SQLException;
import javax.sql.DataSource;
import javax.naming.InitialContext;//unknown
import java.util.ResourceBundle;//unknown
* @author freddy
* This is the Data Access Object (DAO), which deals with all Database transactions,
* connections,and pooling (through Data Source implementation).
* This class configured through the database.properties file
* which contains all the database parameters
* @author: Tariq Qasem
public class DAO {
     private Connection connection = null;
     private Statement statement = null;
     private String dataSourceName =null; //MyDataSource; //null;
     private String dsLookupPrefix = null;//java:comp/env/;
//null;
     private ResultSet rs = null;
     * DAO constructor comment.
     public DAO() {
          super();
          ResourceBundle database = ResourceBundle.getBundle("DataBase");
          dataSourceName = database.getString("dataSourceName");
          dsLookupPrefix = database.getString("dsLookupPrefix");
     * @param request PortletRequest
     * @return void
     * this method close pooled statement
     public void closeStatement() {
          try {
               if (statement != null) {
                    statement.close();
                    statement = null;
          } catch (Exception e) {
     * @param request PortletRequest
     * @return boolean
     * this method connects to the database
     public boolean connect() throws Exception {
          try {
               if (connection == null) {
                    InitialContext ctx = new InitialContext();
               DataSource ds = (DataSource) ctx.lookup(dsLookupPrefix+dataSourceName);
                    connection = ds.getConnection();
                    return true;
               } else {
                    throw (
                         new Exception("connection is not disconnected, you have to disconnect this connection before reconnecting it again"));
          } catch (SQLException e) {
               e.printStackTrace();
               throw (new Exception("Unable to connect to database"));
     public void createStatement() throws Exception {
          if (statement != null) {
               closeStatement();
          if (connection == null) {
               throw (new Exception("database is not connected"));
          statement = connection.createStatement();
     * @param request PortletRequest
     * @return void
     * this method disconnect the database connection
     public void disconnect() throws Exception {
          if (connection != null) {
               try {
                    connection.close();
                    connection = null;
               } catch (Exception e) {
          } else {
               throw (new Exception("can not disconnect database"));
     * @param request PortletRequest
     * @return boolean
     * this method updates (executes) Insert and Updates queries on the database
/*     public boolean update(String query) throws Exception {
          if (connection == null) {
               throw (new Exception("database is not connected"));
          try {
               createStatement();
               statement.execute(query);
               return true;
          } catch (Exception e) {
               throw (
                    new Exception(
                         "Error in manipulating query :" + e.getMessage()));
          } finally {
               closeStatement();
     public int update(String query) throws Exception {
          int records = 0;
          if (connection == null) {
               throw (new Exception("database is not connected"));
          try {
               createStatement();
               records = statement.executeUpdate(query);
               return records;
          } catch (Exception e) {
               throw (
                    new Exception(
                         "Error in manipulating query :" + e.getMessage()));
          } finally {
               closeStatement();
     * @param request PortletRequest
     * @return ResultSet
     * this method executes select queries on the database
     public ResultSet execute(String query) throws Exception {
          if (connection == null) {
               throw (new Exception("database is not connected"));
          if (statement == null) {
               throw (new Exception("statement is not created"));
          return statement.executeQuery(query);
     * @param request PortletRequest
     * @return void
     * this method to set the commit transaction on the database to be auto
     public void setAutoCommit(boolean commitType) throws Exception{
          connection.setAutoCommit(commitType);
     * @param request PortletRequest
     * @return void
     * this method commit database transaction
     public void commitDB() throws Exception{
          connection.commit();
     * @param request PortletRequest
     * @return void
     * this method rollback database transaction
     public void rollBack() throws Exception{
          connection.rollback();
     * @param request PortletRequest
     * @return Connection
     * this method return the database connection as java object
     public Connection getConnection(){
          return connection;
and this is my jsp page:
<%--
Document : index
Created on : Mar 16, 2008, 10:14:55 AM
Author : freddy
--%>
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<h2>Hello World!</h2>
<%
version.dao.DAODirect dao=new version.dao.DAODirect();
try
boolean connected = dao.connect();
dao.createStatement();
String query = " SELECT ID,NAME FROM version";
java.sql.ResultSet rs = dao.execute(query);
while(rs.next()){
out.println(rs.getInt("P_ID")+" ");
out.println(rs.getString("P_FN")+"<BR>");
dao.closeStatement();
dao.disconnect();
catch(Exception e)
out.print(e.getMessage());
%>
</body>
</html>
plz guys help me i need this for my graduation project also if anyone know kind of tutorialsfor building J2me/J2EE application using wifi plzzzsend me links or anything ,thx in advance

This can happen after modifying the calendar properties and not reloading the application. Try reloading or restarting the application. This could also mean the Calendar.properties file has been moved, deleted, or become corrupted. A default properties file can be found at:
"Tomcat-install-dir"\webapps\"your-web-application"\WEB-INF\classes\defaultPropFile\. Copy this file to: "Tomcat-install-dir"\webapps\"your-web-application"\WEB-INF\classes\. Stop and restart the web server. From a browser, run "hostname"/"your-web-application"/src/setupCalendar.jsp.

Can't find original white headphones..(Help)

Similar Messages

Maybe you are looking for