Can't find Outlook, Won't Outlook 2000 work?

When I try to synch my contacts, Outlook does not show up, only Outlook Express (which is not used on this computer).
A search on this site indicates that Desktop Mgr. V4.3 doesn't support Outlook 2000. Since I can't upgrade Outlook to get the functionality I need, is there a work around?
When I try to do a bi-directional synch (with the specified Outlook Express) it acts lilke it is sending data to the computer, but doesn'
t retrieve anything out of Outlook.
Will a newer or order version of Desktop Mgr. help?
Thanks in advance.
CaptainMurph
Solved!
Go to Solution.

Hi,
Try the following:
First a video!
http://crackberry.com/blackberry-101-lecture-6-how-install-microsdhc-card-your-blackberry
Format the card in the BB use :
OPTIONS -MEDIA CARD - menu key - FORMAT.
First make sure the following options are set:
Media Card window ON
Encryption NONE
Mass storage support ON
Auto enable when connected YES
On your media card do you have these folders?
Blackberry
Pictures
Music
Ringtones
Videos
Voicenotes
this is the folder structure that the Blackberry needs to allocate the media to.
You can then use the Drag and drop through Windows. Very quick and efficient, without overhead from the Media Manager.
One not. Some iTunes are DRM protected, and will not play on the BB.
If you need more information, please ask!
If not, please resolve the post using the options by the kudos’ star.
Just check the post that had your answer!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

CAN'T FIND WIFI DRIVER FOR HP 2000 2D99NR NOTEBOOK PC

CAN'T FIND WIFI DRIVER FOR HP 2000 2D99NR NOTEBOOK PC

Hi
Qualcomm Atheros QCA9000 Series
Windows 7 and 8
http://h30639.www3.hp.com/pub/softpaq/sp63501-64000/sp63802.exe
Windows 8.1
http://h30639.www3.hp.com/pub/softpaq/sp63501-64000/sp63733.exe

My imovie is frozen and i can't find a way to make it work.

My i Movie is frozen and i can not find a way to make it work, HELP!!!

Hi,
Please use the following tips/instructions to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Since 8.0 update on my ipad, I can't find autocomplete settings, which used to work for all apps. So much for new and improved.

Since 8.0 update on my ipad, I can't find autocomplete settings, which used to work for all apps. So much for new and improved.

Settings > General > Keyboard

The ProgressBar error - Can't find the __package__.js - Used to work fine

Hello everybody
Yesterday I created a page with some progress bar on it using the BluePrints components and it worked great. Today I come to work and nothing works. I used the HTTP monitor to study the requests and I got what you see below.
Request 4:
Request URI     /appcontext/dynamic/bpui_progressbar_handler/writeAjaxResponse.faces     Edit...
Request 3:
Request URI     /appcontext/static/META-INF/dojo/src/io/__package__.js     Edit...
Request 2:
Request URI     /appcontext/static/META-INF/dojo/src/__package__.js     Edit...
Request 1:
Request URI     /appcontext/static/META-INF/dojo/__package__.js     Edit...
Which all had the same response status:
HTTP exit status (as set by servlet)     404: Not Found     Edit...
So in other words it just can't find the resources for some reason. I found a 'solution' here (which had to do with shale-remoting)http://forum.java.sun.com/thread.jspa?threadID=778815&messageID=4439351
and I did it but it still gave this:
Request URI     /appcontext/dynamic/bpui_progressbar_handler/writeAjaxResponse.faces     Edit...
So does anyone have an idea what is going on here? Because I spent 8 hours on this with no result.
It used to work great until yesterday. I do not remember chaning anything...
Thanks in advance

The first time I used the progressbar this was all I had in my web.xml
<servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.faces</url-pattern>
</servlet-mapping>
After it gave me all those problems with the __package__ thing so my web.xml ended up like this
<servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>/faces/*</url-pattern>
     </servlet-mapping>
<servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.faces</url-pattern>
</servlet-mapping>
And now I got the same ol' problem all of a sudden. I don't know what's wrong. I use the Visual Pack by the way and the project was first started with Creator 2.1. Is there anything I should know?
I think I should better check out the source so as to get the whole picture of shale-remoting...
Thanks guys...I hope we solve this thing together

Windows 10: I can't find a audio driver that will work with my HP Touchsmart 520.

I am beta-testing Windows 10; It handles many HP Touchsmart operations well; but it can't find a driver for audio. I have tried many download sites; and Windows Update (which apparently does have some problems as well) and have been unsuccessful in a two-week search.
I'd appreciate any tips, or direction on how to resolve the problem.
Thank you.

Hi,
I think many hardware vendors are working with Microsoft to get a good out come for all and specially for customers. Users don't want a product like Windows 8 or Vista, they want a rpoduct like Windows XP or Windows 7. Windows 8.1 (not 8) is much better but many users are still don't like it therefore from my opinion: Microsoft have to do something about that.
Back to drivers, as mentioned above, vendors are testing. We can raise our voices but still have to wait.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Latest security download Norton saw cloud 9 virus issue after download Firefox wouldn't open said 'can't find runtime', deleted and reinstall to work XP Pro SP3

Running Firefox 36.0.1 a security update was downloaded on 3.19.2015.
Norton said it found a cloud 9 problem. Afterwards tried to open Firefox,
but instead of opening I received a 'Can't Find Run-Time' error.
Deleted Firefox from programs, installed new and everything worked just fine.
2 days later received a security update downloaded it and the same exact thing happened.
After deleting again, Installed new with 36.0.3 and everything works fine again.
I'm using Win XP Pro SP3

hello, there are [https://community.norton.com/en/forums/problem-firefox-3601-update similar reports] in the norton forums as well. please use the following form to submit false positives to norton so that they can improve their detection systems: https://submit.symantec.com/false_positive/

Firefox says it can not find the server (Windows Internet Exployer works fine

When I try to connect to Firefox,I get the message can not find server.(All my hardwired computers,to Dsl).When we try Windows Internet Exployer it works fine.That is what I am using to send this message.

Not sure of your answers: is the problem solved (as marked) or not.
Did you go through the solution for the Firewall that you use.
:http://kb.mozillazine.org/Firewalls
When you say it works okay on new browser do you mean IE or do you mean if you reinstall Firefox. As far as I know it is the Firefox updates that get are mostly affected. What Firewall do you have.
Also see
:http://kb.mozillazine.org/Error_loading_websites#Other_security_programs

Installed Itunes 10.2.1, can't find library & won't recognize mobile device

I installed the update to 10.2.1 ( not sure why, everything was working just fine) and it gave me an error message that it could not find the library itl. file and was in a music folder location. So, I uninstalled and reinstalled etc. Itunes is working fine now (I think). I thought I had it working and now it will not recognize my mobile device automatically. If I open itunes it will recognize my ipod but will not start automatically as checked. I have done all of the steps on the support website as per uninstalling/reinstalling and starting/stopping/starting mobile support programs and it still will not automatically start when I plug my ipod in. This would not be a big deal but the program I am using to add my library from my ipod onto my itunes will not work unless the mobile support system recognizes the device without prompt. As afore mentioned I had to wipe my old library and this is the best way to restore all of my playlists etc. because my music files did not save playlists. HELP!

OK - pretend I never asked. I just closed iTunes, disconnected the iPhone, reconnected it and hey presto, it all works again. I note, however, that it re-installed the USB device driver software when I plugged the iPhone back in. When I restarted the PC after installing the latest iTunes, I left the phone plugged in, which I guess was the cause.
Do I get points for answering my own question?

Purchased Elements, Downloaded to Drive, Can't find Files, Won't Open from Download list

Can someone please assist? I purchased elements, downloaded the files, saved them to a shared drive, and they are nowhere to be found now. I can't open them from the browser download list, or from the Adobe Screen that says Open Bundle.
Thanks,

If you are using IE 10 to download please try different browser or
use it in compatibility mode.
http://windows.microsoft.com/en-IN/internet-explorer/use-compatibility-view#ie=ie-10

ITunes can't find music & won't run at all

A couple weeks ago we changed servers. All of my iTunes music was on the old server; now it on the new server (with a different server name).
When I try to run iTunes an error message comes up saying iTunes cannot find or create the iTunes directory. When you acknowledge the error it simply drops back to Windows and never runs iTunes. You have no opportunity to go into preferences to tell it the new directory.
I've tried removing iTunes an reinstalling. And going into the Registry and removing references to iTunes. Nothing helps.

When I try to run iTunes an error message comes up saying iTunes cannot find or create the iTunes directory.
this document is a good place to start with that one:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes

Am using 2007 iMac running 10.4.11. Do not wish to upgrade now. Where can I find an external hard drive to work with it? Also need a printer?

I'm using a 20" iMac that I purchased in 2007. It's running OS 10.4.11, and still doing beautifully. But I've got to get serious about upgrading and I don't want to lose the material that's on it.   Purchased an external hard drive about two years ago, copied everything I wanted at that time on to it. When I tried using the h.d. a few days ago it was garbled. Now I see that inside the box it says that it requires OS 10.5+.   Anyone know if there's still a new hard drive out there that would work with 10.4.11?   Can't even find thumb drives to work with my system anymore.   Any ideas would be appreciated.

If I were you I would bite the bullet and upgrade to Snow Leopard. You will still be able to use AppleWorks by installing the Rosetta emulator included in Snow Leopard. And, it's a much better OS version than Tiger.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
See App Compatibility Table - RoaringApps.

I've read a whole bunch of forums about printing from the Ipad2, I think I understand that, but I haven't found anything answering this: I'm hesitating to buy an Ipad because I can't find an answer if this will work.

What I want to do: Set up a (non-gmail...Mobileme or another recommended) dedicated email account on my ipad2 (or ipad3) that does nothing but send e-mails and attachments to my gmail account. Once sent, I can turn off my Ipad and put it away. Then I can go to any computer that can open and print out my received gmail and attachments. (Like, duh, any computer with an internet connection -smile-)
A year from now, I might try setting this up to go thru google cloud/ cloud print -- do you know if apple is doing anything that willl prevent this?
For now, just e-mail and attachments, sent to my gmail account from ipad. The ipad account is to use a unique e-mail address, password, username, login.
Know if this will work? If a work-around is needed, do you know of one? I'm real vague about what a 'push' is in e-mail speak.
Thanks, minimalistme

Sorry, but I'm a bit more confused (by your examples).
minimalistme wrote:
Hi Chris - I'm just trying to be able to get print-outs from my ipad without carrying a special printer around. Suppose I'm traveling and want to provide a bank statement to verify income: I can ask them ( a landlord, say) to let me print it out and sign it for them.
This assumes you are using your iPad and they have an AirPrint capable printer. Or you send/email the form to them.
Or I need to print out a PDF while I'm visiting my nephew - I can fill it out and have him print it out for me. Or I can fill out that landlord's application blank with my ipad and email it to him.
What does this have to do with emailing from one of your accounts to another of your accounts?
Gmail apparently prevents us from sending emails to ourselves.
You mean from/to the same account?
If you can access the email, why would you need to resend it to the same account?
Anyway, its not a privacy issue, but rather a work-around
Don't understand/know what you are working around...
Access the email then send to your landlord or nephew and have them print it.
If they have an AirPrint printer available, you can print it yourself.
Use their computer to access your email though webmail and print it on their printer.
Again, I don't understand what forwarding the email to yourself will accomplish.

Can´t find the way to make it work

Hi I asked this in this forum and others but nobody could give me an answer. I´m gonna try to explain it with more information and all the ways I had try to make it work.
First I´ll show you how my proyect is structured :
Those are all the scenes of the proyect (it is an interactive book).
My problem is with the scene5 (" _escena5") it looks like this :
Ok the current action affects to the symbol selected "_filtroEscena5" and it has this inside :
Allright,now I will explain the action:
I need to drag the symbol "_filtroEscena5" but only when I click on the "Ellipse". Ok, the easy way to do this is with a handle on the .draggable property well this works fine. The problem is the other part of the action. I have on the "_escena5" a few triggers "btnFantasma", "btnOsos" and "btnVini" those trigges have to been activate when the ellipse goes over. This is a scene of a lantern, you drag the light and when you illuminate the Triggers something happens.
So here is my problem, I can´t get the last part working. I first used the accept drop function. I made my triggers droppable and at the accept parameter I put this:
sym.getSymbol("_escena5").getSymbol('_filtroEscena5').$('Ellipse'),
But this does not work, if I make a rectangle o something like these to test it and put it on the accept it works, but not with the "Ellipse".
So I tried other thing...
At the draggable property of the "_filtroEscena5" I call the drag parameter and set this function :
drag : sym.getSymbol("_escena5").getSymbol('_filtroEscena5').$('Ellipse').draggable({
                                           start: function(e){},
                                           drag: function(e,ui){},
I do this to get the id of the Ellipse and then on the drop function of the Triggers i set this :
drop:function(e,ui){
         if(ui.draggable.attr('id')=="Stage__escena5__filtroEscena5_Ellipse"){alert("es vini");
             sym.getSymbol("_escena5").getSymbol('_filtroEscena5').$('Ellipse').draggable('destroy');
This made it responds only to the Ellipse element and then destroy the draggable property to make sure than when I drag it again I move all the symbol and not just the "Ellipse". And this is the problem with it, if I stop dragging the lantern at a trigger it works but if I stop it at any other place when I drag the Ellipse again it moves alone, the symbol does not move with it.
So I call a function at the stop parameter at the .draggable property of "_filtroEscena5" and call again this:
    sym.getSymbol("_escena5").getSymbol('_filtroEscena5').$('Ellipse').draggable('destroy');
All right now I move all the symbol only when I touch and drag the "Ellipse" and don´t care where I stopped it, when I drag it again it works. The problem? this broke the drop function for the triggers it´s like when you stop the drag and then ejecute the drop so when you stop the drag you lose the id information.
I don´t know what more I can do I tried other things but nothing change because this is for tablets and can´t use the mouseover like on the browser.
Plese some help my I spent a lot of time with it.
Thanks again.
Gabriel

Hi
Based on http://www.macosxhints.com/article.php?story=20090923134257835 I rewrite the script to do that. You can set alarms and mail alarms.
(If you don't know nothing about Applescript, just copy the following lines to a Script Editor file and run it, or may ask)
tell AppleScript to activate
display dialog "You want to delete all the previous alarms?" buttons {"Yes", "No"} default button 1
set del_alarm to the button returned of the result
display dialog "You want to receive an email at the same time of the alarm for the events?" buttons {"Yes", "No"} default button 1
set send_email to the button returned of the result
set alarm_date to get_data()
tell application "iCal"
tell calendar "Birthdays"
set all_events to every event
repeat with this_event in all_events
tell this_event
if del_alarm = "Yes" then
delete every sound alarm
delete every display alarm
delete every mail alarm
end if
if send_email = "Yes" then
make new mail alarm at end with properties {trigger interval:-alarm_date}
end if
make new display alarm at end with properties {trigger interval:-alarm_date}
end tell
end repeat
end tell
end tell
on get_data()
set prompt to "Setting the alarms" & return & return & "Days after the event:"
set dialogResult to display dialog prompt buttons {"Cancel", "OK"} default button 2 default answer 3 with icon 1
set dias to text returned of dialogResult
set prompt to "Setting the alarms" & return & return & "Hour of the day: "
set dialogResult to display dialog prompt buttons {"Cancel", "OK"} default button 2 default answer 8 with icon 1
set hora to text returned of dialogResult
set tiempo to (dias * 24 * 60 - hora * 60)
return tiempo
end get_data

My iMac can't find my network/TM but wireless works for 3 other computers

All of a sudden my Mac couldn't connect to my wireless network. I ran the Network Diagnostic and my network can't be found...but my two PCs and my iBook in the house are connected to the network and are working...I tried Airport Utility but it doesn't "see" my Time Machine at all...is this an iMac problem or a Time Machine problem? I've rebooted my iMac and nothing...i've rebooted my TM and nothing...

Having you tried shutting everything down, waiting a few minutes, then turn on your cable modem, wait, turn on your TC, wait, then turn on your Macs and peripherals one at a time.
Of course check cables, too.

Can't find Outlook, Won't Outlook 2000 work?

Similar Messages

Maybe you are looking for