Can't find palm tungsten isync hotsync conduit in leopard

Attempting to sync my Palm Tungsten E2 with iCal & Address Book by USB but iSync can't set up when I attempt to Enable Palm Syncing. iSync Hotsync Conduit does not install and is not found on searching with Spotlight. Palm Hotsync works fine. Where is my software not configured properly?

Problem solved. I was logged into a User Account that did not have permissions to move the conduits to a new folder 'iSync Disabled Conduits'. Logging into the System Manager Account enabled this process to proceed and reverting back to the sub-account the configuring for Enable Palm Syncing process now completed.

Similar Messages

Isync hotsync conduits

isync says to install isync hotsync conduit to Palm Hotsync conduit folder. How do you do that. I have the 4.2.1 palm version installed

You simply add your Palm device to iSync using the Add Palm OS Device… option. The basis Add Device… option is reserved for supported mobile handsets and Symbian OS smartphones.
As you go through that process, iSync installs the iSync Palm Conduit and deactivates conflicting Palm supplied conduits, along with the Memo Conduit and Memos Conduit. Those memo-related conduits can be reactivated manually, as they do not actually cause any conflict with the iSync Palm Conduit, which has not memo handling capability whatsoever.
In some case, under Mac OS X 10.5 and later, the installed iSync Palm Conduit is effectively inert, and must be replaced. If you do not see it using the conduit configuration dialog in the HotSync Manager or in the Palm Desktop, then write to the address in my Public Profile for a replacement conduit package.

My new PC can't find my Tungsten T3 driver!! Can't HotSync!! Waat can I do??

I got a new laptop (ASUS G50) operating Windows Vista. I downloaded the Palm Desktop (selected Vista + Tungsten T3) but the computer doesn't recognize the device, it says it can't find the device driver. WHat can I do??
Post relates to: Tungsten T3

Hello jormass and welcome to the Palm forums.
Is your PC running a 64-bit processor? If it is, the USB driver for cabled HotSync will not work. Please refer to the Windows Vista thread at the top of the Windows HotSync forum for directions on how to set up a Bluetooth sync between 64-bit Windows Vista and your T3.
Alan G
Post relates to: Treo 755p (Sprint)

Can't recognize palm tungsten t3 device

using isynch...can't get palm device recognized

What do you mean by "…all the steps…" in the other thread, and "can't get [the] device recognized?"
Are you attempting to synchronize via Bluetooth, or USB? If using Bluetooth, you must first pair your handheld organizer and your computer, initiating the process from your Tungsten and confirming from your computer. If using either connection method, you must add your device to iSync using the Enable Palm OS Syncing… option under the File menu in iSync, and you must have already installed the Palm Desktop, as iSync requires the bundled HotSync Manager and Transport Monitor to initiate, supervise and terminate a synchronization event.

Where can I find Palm 4.01

Can anyone tell me where I can get a copy of Palm 4.01? I tried the Palm website but can't seem to find this very old version. We are running old library software that can't be up graded and is only compatible with Palm version 4.01. We are using it with a Symbol SPT 1800 terminal to collect inventory information which then gets dumped into the library software. We've tried version 4.10 but it don't work. Any help would be appreciated.
Thanks

Here you go
http://kb.palm.com/wps/portal/kb/na/tungsten/w/unlocked/solutions/article/33529_en.html

Palm Tungsten E2 hotsync with windows 8 Software download loctation

Were can I download software for my computer for my Tungsten E2

Hello, and Welcome to the HP Support Community! Have you read the first post at the top of the list? WyreNut

Can't find iPhoto photos after downgrading to Snow Leopard from Lion

I had my photos on my External Hard Drive being used as a backup for TIme Machine.
After downgrading to Snow Leopard from Lion (my computer was running rediculusly slow likely due to being so close to the minimum requirements), I can not access any of my Time Machine dates prior to the date I downgraded. I have reinstalled Lion to try to access the files that way, but am having issues finding my old photos.
Any help would be appreciated as I've got about 15000 photos of my kids on there.

There are issues with iphoto which changes versions..
I would strongly recommend you do an archive of the TC before you do any more playing.
I presume the TC is the only place you have these photos stored??? So your entire library is hard disk erase from total annilahation.. not good!!
Load a real utility into Lion.. archive is not present on the new version.. why apple why??
http://support.apple.com/kb/DL1482
You can then do a full restore to an external drive.. or something fancy..
Pondini is the saviour here.
http://pondini.org/TM/15.html
There is a specific section on iphoto and its pain.
I strongly suggest you read the entire section from Q14-18 so you actually understand what TM does.

Nokia 6680 can't be added in iSync 3.0 - fresh Leopard install

In Leopard (10.5), the Bluetooth setup assistant only gives me the option to use my Nokia 6680 as a modem. No options to sync it with the address book or the calendar. iSync finds the device, but says 'iSync cannot connect to this device'.
I have been able to sync my address book and calender in Tiger for some time now (I don't remember in which minor version update it was introduced).
The phone is still listed as supported on Apple's web pages. It is also mentioned in /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/ PlugIns/PhoneModelsSync.phoneplugin/Contents/Resources/MetaClasses.plist
However, it does not have its own folder under /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/ PlugIns like many other phone models.
The Nokia software on my phone is (no vendor lock etc.)
V 5.04.07
15-02-06
RM-36
Nokia 6680
Any idea of what I might be doing wrong?
Thanks! Any answer would be greatly appreciated.
Best regards,
Lars Nummedal

Thanks, man!
I didn't think of deleting the old iSync agent on the phone - being used to the Mac just working out of the box
Mine also hung on 33 % progress for five minutes, but then it progressed and finished; importing all my contacts and calendars from the phone.
The 33 % for five minutes progress hang happened only on the first sync.
Best regards,
Lars Nummedal

OSX10.4.9/iSync 2.4 with Palm E2 running HotSync 3.2.1

Hi All,
iSync happily syncs between my Powerbook and phone;
HotSync happily syncs between Powerbook and my Palm...
but I can't get iSync to install the iSync Conduit in HotSync Manager enabling the Palm to download to iCal etc.
I've run 'Enable Palm OS Syncing' from within iSync a number of times. It seems to function OK (moves appropriate conduits within Library>Palm HotSync to a new folder called iSync Disabled Conduits for instance), but when I launch HotSync>Conduit Settings, the expected iSync HotSync Conduit isn't there! Back in Library>Palm HotSync>Conduits, there is newly installed file called Apple though it doesn't appear anywhere in HotSync Manager.
Also, the Palm E2 doesn't appear in iSync when I 'add device>scan' - I believe this is normal and it won't appear until the iSync HotSync Conduit finally appears in HotSync - is this correct?
I have previously had no problems with older iterations of iSync although I haven't used iSync1.? for a year or more - could something be left over that should have been deleted? I have done clean installs of OSX10.4.9 and the Palm OS 4.2.1 fairly recently.

Welcome to Apple Discussions.
There is some confusion regarding this, largely the fault of Apple. There are three names for the iSync Palm Conduit:
• iSync Palm Conduit [the name that most documentation refers to]
• iSync Conduit [the name which it appears as in the HotSync Manager]
• Apple [name of the conduit as shown in the Finder]
If the file Apple resides in your active Conduits folder but does not appear when you attempt to configure conduits using the HotSync Manager or the HotSync menu item in the Palm Desktop, it's likely a damaged file. It should appear in those dialogs as the iSync Conduit.
If you cannot get it to appear, send a message to the electronic mail address listen in my Public Profile and I will reply with a copy you can use in its place.
The iSync Add Device… option is not applicable to Palm devices. You can only get it to appear by using the Enable Palm OS Syncing… option that you've been attempting to do.

ICal and Palm Tungsten E2

I am about to pick up my new IMac from the tech support people and I want to know if I can use my Palm Tungsten E2 with ICal. Where can I find out how to move my Pam files to the new computer? They dont seem to have a clue.

I'm certain that your issue has nothing to do with the SD card you inserted in your device, and likely nothing to do at all with pTunes. The errors indicate a fundamental problem with the Sync Services framework. You can apparently initiate a session, and pull changes, but not complete the remainder of a typical five-step synchronization session.
Take a look at this document for an overview of what should happens when you synchronize:
http://developer.apple.com/macosx/syncservices.html
You can reset the truth database—a process which will reinitialize the framework and make it appear as though you have never synchronized before—simply by launching iSync, opening the Preferences… dialog and pressing the Reset Sync History button. That will not affect the data stored in any applications, or on any devices or servers, and will not unregister any sync clients. Once you've done that, attempt to synchronize again.

Register consolidator hotsync conduit

I can't manage to register the hotsync conduit for consolidator with the regset.exe
Does anyone know how i can do ?
Thanks
null

I can't manage to register the hotsync conduit for consolidator with the regset.exe
Does anyone know how i can do ?
Thanks
null

Where can I find Correct Procedure to Restore My Mac G5 to original OS X?

When I bought my Mac G5 Tower in 2004, it came with a Power Mac G5 Software Install and restore CD and a 3 CD set of Panther Upgrade and install discs.Last summer I installed Mac OS X Leopard 10.5. I have since installed download upgrades to OS X 10.5.8.
I was having problems with alignment when I printed, so I used the latest version of Norton Systemworks. The next thing I knew was my computer was stuck in an endless several minute loop, then it would make a lot of noise, restart and start all over again. I had to get a Mac Computer Tech to break the endless loop.
Now I'm having problems loading software, so I believe my system software is all screwed up. I feel I need to remove both Panther and Leopard and restore my computer to the original condition. Then Reinstall both Panther and Leopard.
Where can I find the Correct Procedure to Restore My Mac G5 to original OS X software?
computeWhere can I find the correct procedure to remove both Leopard and

Click here and find the article for the OS on those disks.
(53158)

Tungsten T5 iSync, HotSync, Missing Sync for iCal, Mail and Address Book

I have just been given an old Palm Tungsten T5 and have been looking at the various options available to make it do what I need with regard to syncing it with my G5 PPC iMac with 10.4.11.
I use the T5 only when I am away (from the iMac) and travelling and would like a set- up that allows me to sync, in this order of priority:
iCal, including annual events such as birthdays, and differently colour-coded calendars and, if possible, to dos although these are less important
Mail
Address Book, in which I really only have e-mail addresses
According to some old threads on the subject, Missing Sync appears to be the program of choice for syncing iCal and Address Book, but not Mail. Instead there appears to be something called Mail.App Conduit 2.0.1 requiring at least Palm Desktop 4, and presumably HotSync.
Is there a single program that will sync all three of these Mac applications effectively? If not, am I going to have to (buy and install and then) uninstall Missing Sync and Palm Desktop (or HotsSync) alternately?
Is iSync a real option?
Or is there some clever way of using one or more programs to start with and then switch over to just one?
I would be grateful for any advice as to how to deal with this. Thank you.
Nick

I don't know if you can do this with the Centro. I should have mention that I was talking about webOS (Pre and Pixi). To sync with webOS you need Mac OS 10.5 or later for iCal, and 10.6 for Address Book.

Can't find my data file to back up, so I can uninstall and reinstall the software. (Windows, Vista & Palm version 6.0.1)

I can't find my data file, in order to back it up. After going to Documents - Palm One, the only thing that looks like a user name is a file with no data. Somewhere there has to be another file with all my data, since data is available when I open the Palm One software on my computer. After backing it up, I want to uninstall and reinstall the Palm One software. I'm hoping this resolves my inabilty hot sync. Thanks! Lauraflavin.
Post relates to: Tungsten T5

If you're using XP, your data is here:
C:\Program Files\Palm (or PalmOne)\ your Hotsync Name abbreviated \
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Can't sync Palm with Mac through iSync, only syncs with Palm Desktop

I have an older Palm Tungsten T3 that I use basically only to run a medical application that I need at work (ePocrates, which has its own conduit and auto-updates itself with hotsyncs). I haven't tried to sync it to my Mac for a long time. I use iCal for my calendaring needs, sync it with my iPod, and ignore the old stuff that's on the Palm, which I hardly ever even sync.
Today I had to reinstall the Epocrates software, and decided while I was at it I'd try to get the Palm syncing with the Mac (iCal, contacts, etc) again because it would be nice for it to show the same calendar data.
I reinstalled the newest version of Palm Desktop from scratch. Installed the ePocrates software on top of it. I have iSync 2.4. My Palm was not listed as a device initially. I chose "Enable Palm OS Syncing" from the menu; iSync then went through a series of steps in which it disabled several conduits (presumably to no longer sync with the Palm Desktop), then told me to enable the iSync Palm conduit through the HotSync manager, which I did.
I now show the Palm as a device on iSync, but it has a yellow caution icon over it and I'm not sure why. Clicking on it shows an options dialog. I chose for the first sync I wanted to erase everything on the device and then sync with the Mac. My syncs appear to work, but when the data is checked it seems to sync only with Palm Desktop. The old junky data on the Palm was not erased as requested. Newer calendar events and contacts from my Mac have not made it to the Palm. The ePocrates auto update conduit is working fine but that's the only part that is.
Any idea what's incompatible, or what I'm doing wrong here?

I have The Missing Sync and used it to sync my palm TX. I am now in the process of trying to get iCal going properly again. No longer have any calender views in iCal and the week views don't show until I have opened a month view and then go back to the week view. Very bizzare. Also have a heap of untitled calendar views in the drop down list option when looking at the info on any event - these calendar views are not accessible anywhere else though.
I'm not sure if it is Missing Sync or something I did wrong at present. Will also throw the problem to the Missing Sync people to see what they say. Will let you know. It seemed to work really well without needing the palm desktop!

Can't find palm tungsten isync hotsync conduit in leopard

Similar Messages

Maybe you are looking for