Can't find printer after removing it.

Hello,
I happen to have an HP LaserJet M1132 MFP, which was working pretty well until recently it started sending that "/usr/lib/cups/backend/hp failed" error described in the wiki. I did have dbus running, I tried running avahi-daemon, but no use. So after googling up the problem, I found out that people had the issue solved after removing and installing the printer again.
Well, I removed the printer via CUPS web interface, and tried to install it again via hp-setup, but this time the printer is not recognized! dbus is running fine, so does cups. lsusb does seem to recognize the printer:
Bus 001 Device 006: ID 03f0:042a Hewlett-Packard
Trying to manually feed the device id to hp-setup completely freezes it (and even pkilling it won't remove the window after that).
dmesg find it too:
[ 554.981309] usb 1-1.1: new high speed USB device number 6 using ehci_hcd
[ 555.066090] scsi7 : usb-storage 1-1.1:1.0
I had it installed before with no problems.
Anyone can help me to get my printer installed and working again?

It sounds like you have not installed, but only downloaded it. Have you checked your downloads folder for the installer? 

Similar Messages

  • AirPrint - iPhone 5 can not find printer after router change

    AirPrint - iPhone 5 can not find printer after router change; however router is exact replacement of previous one (Zyxel, issued by Imagine wireless). AirPrint was working previously. Printer is on same network. Wireless printing working fine. Have tried rebooting prtiner, phone and router. Any suggestions?

    I'd look to HP for support.
    Here's an HP Airprint-related trouble-shooting page:  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03314085&tmp_task=solveCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=5271613
    Lots more info on the HP support site.

  • How can I find/reactivate a removable drive after I've ejected it?

    How can I find/reactivate a removable drive after I've "ejected" it (without simply plugging it back in)?

    Applications->Utilities->Disk Utility
    Choose your drive and click "Mount"

  • IPhone 6 screen freezes and can't find wifi after iOS 8.0.2 update

    iPhone 6 screen freezes and can't find wifi after iOS 8.0.2 update. Have to do a hard reboot. I am Extremely disappointed and lost ALL trust in Apples Quality Assurance. From now on I'll wait a week before I update.

    Hey there Shortos,
    It sounds like your phone touchscreen is not consistently working for you after updating to iOS 8. I can see how that would be pretty frustrating. It sounds to me like this could be a software issue or an issue with the screen itself. I would start with the troubleshooting in the following article to help troubleshoot the screen itself:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    If that does not resolve the issue, I would next quit all the running apps on the device:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Remote printer is recognized but message says can't find printer?  It worked great before installing OSX Maverick

    Remote printer is recognized but message says can't find printer?  It worked great before installing OSX Maverick?

    Thank you for your response.
    Unfortunately I have already rebooted the router and that did not fix the problem. The weird thing is that the computer is connected to the network, it just won't connect to my computer. I have printed the network configuration page to confirm this, and it says the wireless signal is strong. 
    I have not changed anything at all recently in terms of routers, networks, etc. The printer stopped working completely randomly.
    Is there a part in the printer that like emits a signal which computers, phones, etc are supposed to detect? I don't know enough about the mechanics to really theorize about what is wrong, but it seems like that is the only thing that stopped working. 
    Do you have any other suggestions?

  • Can't find printer brother printer

    Can't find printer brother printer

    dechamp wrote:
    I've been using my networked Brother printers on SL since day 1, actually since before day 1. No problems with IP printing and CUPS drivers at all. I've also been able to set up the scanner function over the network very easily.
    I've set my printer to a static number, tell the printer installer to use IP printing, and type in the IP number and the Mac finds the printer and assigned the driver.
    Have you tried "Resetting" the printer system by right clicking in the printer list box?
    Yes, I did try resetting the printer system.
    Obviously something is wrong because I can't add the printer. When I hit the plus sign it is not there unless I set up a Mac to share it.
    Thanks

  • Can not find printer from computer hp officejet pro L7780 all in one

    I just recently tried to print and my printer can not be found I do not have the disk that came with the printer it is lost  and it keeps telling me it can not find printer 
    This question was solved.
    View Solution.

    What operating system?
    Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How can we find print program for user defind Tr. Code.

    Hello Friends,
    If I know the user defined Script Name and Corresponding Tr. Code, How can I find Print Program. In TNAPR Table, I am getting SAP Standard forms and corresponding print programs?
    Thanks & Regards
    Sathish Kumar

    Hi Sathish,
    You can use the table TTXFP to get the name of print program by entering the Script name.
    Hope this helps.
    Regards,
    Saurabh

  • I can't find iSync after lion install

    I can't find iSync after lion install. I try too sync with my N8 Nokia. The program iSync dont appear in program mapp.

    It's Apple's software not yours and as shown by it's exclusion on the OS X Lion pages is not part of the new OS. Upgrading to Lion is optional.
    It's a trivial matter to copy it back from your Snow Leopard backup, but using it under Lion is not supported at all and WILL stop working sooner or later.
    Why would it be sensible for Apple to include software in their new OS that they know will stop working?

  • Why can't I print after I upgrade to MAC OS 10.10 (Yosemite)?

    Why can't I print after I upgrade to MAC OS 10.10 (Yosemite)?

    You need a printer driver upgrade. Check with your printer's manufacturer to see if they have a new driver available. If not, then ask their tech support for additional help.
    Meanwhile, open Print & Scan preferences, select the installed driver and click on the Delete [-] button. Then CTRL- or RIGHT-click in the list space and select Reset Print System from the context menu. Now, click on the Add [+] button to re-Add your printer. See it this helps. Be sure your printer is connected and turned on.

  • My iPhone 4 can not find network after updating to 7.0.6

    my iPhone 4 can`t find network after updating to 7.0.6. i`ve reinstalled system, but nothing`s really changed.

    iPhone 4S: I have the same problem. After updating to iOS 7, wifi worked for some time, and then it stopped working. I can't even enable wifi. I just updated to iOS 7.0.2 and it didn't help at all.

  • Having successfully reinstalled hp inkjet printer Photosmart 6520 it doesn't show up anywhere on the computer; not can I find Printer Setup. Help! newo

    Having reinstalled an accidentally deleted HP inkjet printer Photosmart 6520, I can't find it anywhere on the computer, nor can I find Printer Setup. Your help valued,
    newo

    Eric, I'm sorry not to be much help. As I'm not technically minded I was finding it hard to follow Paul's questions and he sorted it himself, but did say that it was to do with configuration.
    Elizabeth

  • My hp cm1415 fnw color mf printer responds to laptop via air print but iphone4 can not find printer.

    How do you connect iphone4 to hp cm1415fnw color mfp using air print. Printer works via airprint from laptop using windows. iPhone can not find printer..

    check if your phone and printer are updated to the latest version.

  • Printer software will not finishing loading/can not find printer

    received a Canon MX922 as a present. Attempting to connect and install printer to my HP Pavilion 17 notebook.
    The software stops loading in the final 2 to 3 minutes of completion. Using printer on my wireless network.
    All messages say can not find printer!!

    Hello rewing45,
    Welcome to the HP Forums.
    I see that you are having an issue with installing your Canon printer on to your Windows 8 computer.  I see that the computer is an HP.  I suggest that you contact Canon for installation instructions.  They will troubleshoot the printer on the Operating system NOT on the make of the computer.
    Here is the link for Canon Support.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Where can I find instructions to remove the SIM card from my iPad?

    Where can I find instructions to remove the SIM card from my iPad?

    Try this discussion
    https://discussions.apple.com/message/25109634#25109634

Maybe you are looking for

  • Photoshop Elements 6.0 startet nicht

    Hallo, wir brauchen Hilfe zu Photoshop Elements 6.0. Das Programm liess sich plötzlich nicht mehr oeffnen, wurde de- und wieder re-installiert. Problm nicht behoben, laesst sich noch immer nicht oeffnen.- Das BS ist WIN XP PRO, das Programm wurde unt

  • Special field in FBL3N

    Hello, Would You help me the next problem: I've added new field to GL line item report, which is vendor number (this is not offsetting account number). Is it possible to add description from vendor master data? BR, Natalija

  • Whitecap could not load in 64 bit mode error when opening iTunes. What do I do?

    Upgraded to Lion recently. Opened iTunes and got a "Whitecap could not load in 64 bit mode". Tried to sync my iphone a few times but iTunes crashed. Managed to fix the problem by making iTunes run in 32bit mode only. My version of iTunes is 10.4 (80)

  • Web Banner with Video: How to start a flash animation ONLY after .flv is finished loading.

    Hi, I am making a 10 sec. web banner and am required to use a video that is on an external server. I had no problem getting the video file converted, uploaded to the external server and it is now playing back perfectly after exporting the .swf file.

  • X2100 m2 - elom - wrong certificate uploaded, web ui no longer available

    Hi, I've uploaded wrong certificate to X2100-M2's ELOM (I've uploaded custom built certificate + private key in one PEM file -- w/o doing CSR, signing it by CA's and uploading that), it was stored without any complaints, but now the ELOM won't respon