Can't Find Recipe Box after upgrade to Windows 7

I own a TouchSmart IQ526. Recently upgraded to Windows 7 and TouchSmart 3.0 software but cannot find the Recipe Box application. The following page says there's a download:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01941604&cc=us&lc=en&dlc=en&product=3875698
but I can't find it.
There is no download for it even though bought the computer for my wife and she loves to cook. Please help! Thank you.
This question was solved.
View Solution.

ok, here is word for word as much as i can, if you can't follow this then get your Touchsmart PC, put it back in the packaging it came with and sell it on ebay or seriously get friend who has some computer literacy that can help out...
http://h30434.www3.hp.com/t5/TouchSmart-PC/How-to-install-Recipe-Box/td-p/189935
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Similar Messages

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can't install cc-patches after upgrading to windows 8.1

Hi Adobe-Team,
after upgrading to windows 8.1. I can't install updates and patches of the creative cload programms. I'm able to uninstall programms. I'm able to install programms, but i cant't patche them. Got this message: "Installation erfolgreiche, aber Fehler beim Patch (U44M1I210). I've no idea what to try further more.
Thanks for your help
Andreas

Hi Andreas,
Error Code: U44M1I210 means failed to extract the downloaded ZIP file of update.
Please follow the instructions specified on following kb doc and see if it helps -
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
Let us know if it does not solve your problem.
Regards,

Can't find BBM Icon after upgrade on Torch 9850

Hello all
I did an upgrade to my Torch this morning per a message to upgrade the BBM this morning and all looked like it went well and I restarted the device and NO BBM ICON..
Can anyone help me?
I tried unhide, etc and I can't find it.
I tried to redownload it but it says that it is on my device.
Thanks for any help
Solved!
Go to Solution.

Very sorry, I misread, as the AppWorld missing icon has been prevelant for many, and I jumped in with that solution too quickly.
Do this,
from your Options > Device > Application, scroll to and delete BBMessenger.
Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
The, after reboot, using your BlackBerry browser, go to www.blackberry.com/bbm and download/install again.
Again, my apologies for the initial misunderstanding.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

[SOLVED] Can't find root partition after upgrade

After upgrading to Linux 3.6.6, the boot fails with something like "can't find root, UUID=..." and I get a root shell. Choosing to recovery mode in GRUB doesn't make a difference.
I don't have any sda devices in /dev.
/proc/partitions is empty.
I have Macbook Pro 7,1.
Ubuntu on other partition works.
Any idea how to fix this?
Last edited by dontbugme (2012-11-08 17:53:46)

dontbugme wrote:Now I realize that I did a probably stupid thing. I removed mdadm and lvm2 thinking that I don't need them. So the mdadm kernel module is missing. Could this be the problem? I don't use RAID or LVM.
I don't use these either ... but this does sound like a very plausible cause of this error. Are you sure you aren't using either?
In any case, it's easy enough to add them back and see if that solves this. Boot into live media, chroot, add back the modules to mkinitcpio.conf and rebuild the initramfs. If nothing else this would verify that these are not the problem.

Airport utility can not find extreme station after upgrade to 7.5.2

i been using extreme for about 3 years and it was fine until yesterday i upgrade to 7.5.2, it result i lost the internet. opened airport utility from my macbook, said" it can not find any wireless device" but on the top right of mac windows, the signal sign is still there,
i suspect it is something wrong with the IP setting, but i has't changed any thing myself, maybe the new updates change it?

kfc360 wrote:
"it can not find any wireless device"
Welcome to Apple's discussion groups.
Your system details don't mention what type of Mac you have, but if you can move it near to the AirPort Extreme and connect an Ethernet cable to a LAN port on the Extreme, then AirPort Utility should be able to see it. Once AirPort Utility can see it you can begin to investigate the problem in more detail.

Where can I find a document after upgrading to the most recent OS on my iMac?

I upgraded my OS yesterday on my iMac and now I can't find the most recent version of an Excel document. I saved it as recently as yesterday when making changes but the document that shows up is from 9/10. Any ideas where I might find it? I've already done a search, etc.

Command-f (Apple-f) will open a find window-click to find everything modified yesterday.

Can't find last .prprj after upgrading to CC 2014, is it permanently lost?

My computer crashed, but managed to keep all of my personal files. I redownloaded Adobe softwares but had to now get CC 2014. Besides the initial compatibility problem I faced with having a new version, I have had to find the last saved instances for several unfinished projects, to get back to the last edit. With one project, I can't find the most recent auto-save, if I can't find it I've lost over ten hours of work.
Any chance I find the last save? I've searched all auto-save folders, seemingly running out of options here. Any help is really appreciated!

Honestly, this hasn't been the first time I looked for an auto-save, and it stems from a time when I reopened a project once and found that it did not have the last sets of edits from the last time the project was worked on.
I resolved the problem by going to my auto-save file, or so I'm thinking now: the reopened project did not have the Sequence I had last worked on opened, and panicked without verifying whether the Sequence file was sitting alongside the other files. That is what happened this time around. I have multiple sequences, and only one that is short was on the timeline. The others are hidden in a Sequence Bin, it was there all along.
As for backup files, I have all the original video files backed up on a separate hard drive. Please let me know if you think I should take further steps. Thanks!

I can't find ios partition after installation of Windows 7 via boot camp. can someone help please?

I installed Windows 7 via boot camp and now I can't find my Mac partition. My commuter boots up to a blank gray screen and after several minutes the Windows partition starts. I don't know what to do. Can someone help me?

In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
and Boot Camp: Install or repair Boot Camp drivers.
The other option is to use
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
How to Reset NVRAM on your Mac - Apple Support

ITunes can't find my playlists after upgrading to 10.3. Help!

iTunes automatically upgraded to 10.2.2. When it finished, none of my data was visible. No music or play lists.
After checking the web, it was suggested up re-boot the computer. Didn't change anything.
Another suggestion was to re-install iTunes. When I did so, it showed 10.3 available. So I downloaded and intalled that. Still no existing information showing.
So I had iTunes search for my music. It found some/all of it. Haven't checked yet.
But NO playlists. Is there a way to find them and load or am I just screwed by the upgrade and have to start over?
Thanks for any help you might have on this.
Thanks!

I would recommend you put everything including th eiTune slibrary files into the iTunes folder on the external.
This way, you will not have any issues when moving th eHD anywhere else. The entire library will be on it.
Quit iTunes.
Copy the entire /Music/iTunes/ from yoru internal to the external.
Move your current iTunes media folder on the external into the /iTunes/ folder you just copied to the external.
Hold Option and launch iTunes.
Select Choose library and select the iTunes folder on the external.
Now you can plug in the external to another/new computer and launch iTunes holding option as above and everything will be there.

I can't find my music after upgrading to Lion

Can anyone help me recover my music?

I upgraded to Lion and now my Itunes is empty, I cant find previous installs to revert to and I still have the music on my Ipod.

Can't find a folder after upgrading to maverick and still have the previous OS

Hi,
Last night I upgraded my mac to maverick...my previous OS was in Disk C and since it was showing that disk is full i had to put maverick in disk D..so i have two disks with OS that means less space for my personal use....also while putting maverick in D I already had a folder containing movies in it...When i am searching in spotlight i can get the movie but am not able to find it without it....Also how do i get rid of the previous OS and should i do that??

ishica ghosh,
it sounds like what you’re calling your Mac’s internal space is what I’d call your Mac’s internal hard drive, and what you’re calling your three separate disks are what I’d call three partitions of your internal hard drive.
Let’s begin by approaching these aspects one at a time. On my Mac’s internal drive, only 22 GB of space is being used in total, including Mavericks and perhaps a dozen apps. If your Disk C has been sized to be 119 GB but it is mostly filled up, then it seems as though you must have significantly more apps or data installed there than just your old OS. Do you have more than one administrative user and one standard user under your old OS?
Here’s something that you can try to find out the amount of space that is being used by the user accounts on Disk C: boot into the old OS by holding down an Option key as you power up, use your cursor keys to select the OS on Disk C, and press the Return key. Log in as its administrative user, and from the Finder press Command-Shift-U to open the Utilities folder. Run Terminal.app in that folder. Within the Terminal window, give it the following command:
sudo du -sm /Users/*
This command will ask you for a password; give it the administrative user’s password. The password will not be displayed as you type it. Please copy the output from this command into your reply.

Can't find email attachments after upgrading my ipad to IOS 7.1

I use my ipad onstage for song lyrics and set order. I compose and edit the song lyric sheets in Word on my PC, email the files to myself as attachments, and open them in Word on my ipad. Until this morning, I had no problem doing this. After I upgraded to IOS 7.1 this morning, my emails on my ipad (latest version) all have the attachment paperclip greyed out. Does anyone know what setting to adjust so I can access them again??

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

Can't find project files after upgrade to version 3.0

I upgraded Aperture from 2.0 to 3.x and I can no longer find my project files in the Aperture folder?
All is working fine, I just want to copy the project files and they are not visible in finder.
any ideas

I misunderstood your question. As you were referring to the Aperture folder and locating things in the finder I thought you were trying to find the image files external to Aperture.
As for info on the structure of the library, from within Aperture take a look at the user manual: http://documentation.apple.com/en/aperture/ this is the online version its the same as what you get when you go to Help in Aperture. Pay particular attention to the first section which describes the various parts of the library and how it all goes together.
As for rating answers, if the thread is yours and you are logged in then eash seperate post should show this
at the bottom. Select the rating you want to give to the post. Remember only one post can be correct up to two can be helpful.
regards
Not sure what you mean by maintain files in a "creation date" format? If you describe what you are looking for then I'm sure someone will chime in.

ITunes can't find existing files after upgrading HDD

What the subject says - I have a 2008 Mac Pro & iTunes 10.6.3. I just upgraded the HDD where iTunes lives, by copying the entire drive to the new one, then installing the new one in the same bay as the old one. Whenever I open iTunes, a few of my +/- 6K tracks show the (?). This happens to different tracks each time I open iTunes.
It's a pita to re-locate these every time I access iTunes. Is there any way to correct this problem without trashing all my playlists, album art, ratings, etc?
Pls help! It's taken a long time to build this library and I'd rather not have to start all over. I still need to edit then add about 40 LP vinyl albums to the library, and I don't want to continue adding them until this problem is solved.

Sorry. Found the answer myself. DUH! I needed to tell iTunes preferences that the iTunes folder was on the NEW HDD rather than the old one.

Can't Find Recipe Box after upgrade to Windows 7

Similar Messages

Maybe you are looking for