Can't find remote control code for Samsung BD-P2550

I am trying to configure my verizon fios remote to control my Samsung BD-P2550 using the DVD button on the remote. None of the suggested codes work nor does search for the code using the remote and the fast forward button for infinite attempts, PLEASE HELP!

joebingo,
Unfortunately the Verizon-provided universal remote will not work for all devices, particularly for advanced devices such as BR players. If you've already tried all the Samsung DVD codes and none of those work then it's most likely that there is not going to be a working code for this particular device.
However, you can try doing a manual code search by following the instructions here.
Regards,
Chris
Christian
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

What is STB Remote Control code for the Magnavox 15MF400T/37 set?

Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?

If none of the codes worked, your only other option is to do a scan.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the
TV
key in step 2 and 3.)
1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK
4. Release both keys. The Device Keys will blink twice.
5. Press 9 - 2 - 2
6. Point the remote at the TV.
7. Press the play button
8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.
9. When the TV turns off, you have found the right code. Press OK to store this code.
Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT
If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.
====================================================================================
Error exists between keyboard and chair.

I purchased an itunes gift card for my nephew. I received a confirmation that the credit card had been debited, however he never received a code to activate his gift. Where can I find out the code for my gift voucher?

I purchased an itunes gift card for my nephew. I received a confirmation that the credit card had been debited, however he never received a code to activate his gift. Where can I find out the code for my gift voucher?

If you purchased your gift using iTunes, you can resend it. Just follow these steps to resend an unredeemed gift to any address:
http://support.apple.com/kb/HT1541

Remote control code for Sharp LC-32DV200E

Hi there!
i have just tried all codes for Sharp from BT Vision help page and it does not work. My telly is less than a year old, so it can't be an issue of old telly. Does anyone know any other codes (apart from those on |BT Vision list in help)? I will greatly appreciate some help here. Thanks in advance.

Yankee2 wrote:
Bought a new rev'8' sky remote control as the old one has hard-to-push buttons. I followed the instructions for programming the remote to my tv (LG 32LC2DB) but the codes supplied do not work on new remote. Checked code on 'old' remote (0206) and tried that - no luck. Red light does not blink when holding down 'select' and 'red button'. Switched everything off, removed batteries, turned back on and still nothing. New remote does work all Sky controls but not tv. Any suggestions would be appreciated. Try these codes as well 1293 1206.Then try the procedue below.Press TV (one flash)Hold select and red till remote flashes twice999SelectTVSelect and red till two flashesEnter codeSelect

Where can I find the original code for class in Java API

I am learning Java programming and wanted to see how professionals handel all cases. Can anyone tell me where I can find the original implementation code for classes in Java API? It would be a great help for me.

the basic source is where you installed java in a file called java.src, its either in the main dir of one of the sub dirs ( mmm ), contains all the source code for all the classes in the api.

Where can I find the Product Code for Windows Office Home Edition after a recovery? Without disk.

I had to conduct a Factory Recovery on my notebook. Everything loaded correctly. When I opened Windows Office Home Edition it asked for a product code. I don't know where that is located, it came already installed on the computer. I looked through the original paper work that came with the laptop and can't find any information.
Please help, I have much work to do.

If it came pre-installed as the full version, then you should have received the product code with your paperwork when you purchased the notebook. Unfortunately there is no way to recovery the product key from the previous version of Windows that you had installed.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How can I change my Bookmarks Sidebar to transparent - can't find the proper code for CSS file

I have recently changed my #nav-bar and #PersonalToolbar to transparent thanks to suggestions I found online. But I cannot seem to get my Bookmarks Toolbar to do the same. I tried #BookmarksSidebar with no luck. Any suggestions?

That's great, matthungo, I'm glad it worked and you've got your Bookmarks back. Wishing you and yours a wonderful and blessed Holiday season as well!

Code for Samsung airtrack soundbar

Hi,
Looking for remote control codes for Samsung airtrack soundbar. I tried all the samsung codes and none work.

Me too. I think were hosed. Maybe back to DirecTV. Another post said if if dont have the code it never will. I have a nice universal remote but still prefer the stock DVR remote, esp for the wife and kid. Too bad,

Where can I find the pin-outs for 8-pin remote Hirose connector?

Where can I find the pin-outs for 8-pin remote Hirose connector?

Pin outs and wiring info is all in the Maintenance Manuals (same for all system cameras, F series, XDCAM etc.), - ask your local Sony Office if you want the info.The 8pin remote is for connection to the Sony RM-B150/170/750 remote control panels.For system cameras the same protocol is used between RCP panels, MSU, CCUs and camera heads.It is a proprietry system so extremely difficult to hack!The RM-B170 is the ideal panel to work with the PMW-F5/55. It will give basic painting control of R/B white & black painting, Master Pedestal, and Iris with the correct lens (Cabrio etc). It can also control remote Rec stop start.Regards, Clive. Sony ANZ.

RT: Remote desktop says "can't find a suitable device for drive C"

Hello,
there is a french post on exactly the same topic, but I can't apply the solution given there.
My problem is the following: I have a remote desktop prepared to work as RT target. It has been checked for compatibility, the hard drive has been formatted in FAT32 format, it has been found by my host and has been assigned a static ip address. I have installed the software I need ( LabView 9.0 RT) using MAX. Now, when I try to boot it with the option "boot using software installed into the hard drive", all I get is the message
"Can't find a suitable device for drive C"
I have reseted the BIOS, have tried formatting the hard drive in the other format, uninstalled and reinstalled the software, tried to start the target pc without the usb stick, but nothing seems to work.
Do you have any ideas about what is going wrong?
Thank you,
Samuel
Solved!
Go to Solution.

So you've got a IDE (and not SATA) hard drive? That should be supported anyway.
That would only confirm my experience... it's hard to find hardware compatible with LV RT. Before buying you cannot know if it's compatible. Once you have it the evaluation tool might tell you it's supported but still it might not work. I tried several motherboards in the last years, most of them did not work.
Your best bet might be to use relatively old hardware.

Where can I find the coupon code required for registration?

Where can I find the coupon code required for registration? I purchased the design standard at Officeworks in Australia and given the box a thorough check, but unless there is a number not labelled 'coupon code', it's definitely not there. I am using this product personally and not for business so I have no IT dept to assist.

Find a serial number
For anything else contact support directly or work things out with your reseller.
Mylenium

Remote infrared codes for the Sony STR-DE675 receiver

Where can I find the remote infrared codes for the Sony STR-DE675 receiver? They are not in the Owner's Manual, nor on the Sony.com website. Thanks.GBP

If you were getting sound and no picture when you had the Wii hooked up to your surround sound receiver, your TV was probably on the wrong input. You would have needed to use the source or input button on your TV's remote and changed the input to the component 1 choice, since that is the port you stated you plugged the Wii into on the TV.
Your cable remote may not be programmed to work with the blu-ray player. However, I think you're misunderstanding the function of the buttons at the top of your remote labeled TV, Sat/Cab, VCR, etc. Your cable remote doesn't work like a Harmony remote. Pushing those buttons at the top of your cable remote are not like pushing the Watch TV or Watch DVD functions on a Harmony (meaning pushing them doesn't change the TV's input automatically). All those buttons at the top of the remote are for that you're describing are to tell the remote which components to control. For example, you are watching cable TV and just used the remote to change the channel but now you want to adjust the volume. You would have to hit the "TV" button on the cable remote to switch the remote from controlling the cable box to controlling the TV. Otherwise, you'd hit the volume controls over and over and nothing would happen b/c the remote would still think it was controlling the cable box. Only a Harmony remote (or similar universal remote) can change the TV's input with the click of a function button.
And to explain why one must change the TV's input when switching components, I always compare the process to the way a tube TV used to work for those that are new to the flat screen TVs. Think of the way your old TV probably worked - you had to have the TV on channel 3 for your VCR, 4 for cable, etc. The input changing is practically the same thing with just a few more steps, if that helps to make things any clearer. LOL
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!

Dreamweaver CC and Windows 8.1 - Can't Find A Valid Editor For This File Extension

Was running the latest version with no issues and then I loaded Office 2013 .. Now when I am in the remote site and try to double click on a .cfm file, I get a dialog box..Can't Find A Valid Editor For This File Extension..
I tried the support chat and they said Dreamweaver support was not available, try again later???
So I thought I would reinstall the CC version and now I can see the Dreamweaver icon next to the files but still ... can't open the file..
Any assistance would be appreciated?
Leo

The issue is only in Windows 8.x where when Dreamweaver CC is installed, it is not able to turn on the file type associations by default. The workaround for now is to manually add the extensions both within Windows and then within Dreamweaver CC itself.
Go to Control Panel > Programs > Default Programs > Set Your Default Programs and select Dreamweaver CC and then select 'Choose defaults for this program' and Select All or the extensions you want to open in Dreamweaver CC
Start Dreamweaver CC and go to Edit > Preferences > File Types/Editors and add '.cfm .cfc' to the extensions and then add C:\Program Files (x86)\Dreamweaver CC\Dreamweaver.exe then click on Apply and Close
That should be it.
James

Remote Control settings for Markers

The user manual for Studio Pro 4 states that Remote Control settings for Markers will override all other settings while that part of the track or story plays.
This however, is not the case- In my project the track & story settings for Remote Control>Menu are actually overriding marker Remote Control>Menu settings, & I really need the marker functions to take precedence over other functions.
Any idea how I can make this happen?
Thanks!!
eric

As Jake said - I am not seeing this behaviour either.
If you clear all end jumps from chapter markers and place the markers into stories then you set the menu call for the story. This can be different to the track and depending on which you are playing the menu call for that item will take precedence.
Of course, if you really want to make it bullet proof then you could point the menu call to a script. Assuming that no matter which story you are in, or how you got to the marker in the track, the following script will always return you to a specific button on a menu for the marker that you have just played
mov GPRM0, SPRM7
Jump Menuname, [GPRM0]
SPRM7 is a system parameter that checks which marker has just played. The first line of the script loads the value of this into a memory slot called GPRM0. The second line operates a jump to your menu - I assume there is only one menu here - and using a conditional GPRM based button jump, the value of GPRM0 fills in the value of the button to go to. This saves writing out lines of code for each possible button.
If you have lots of menus then this script can be adapted very easily to cope with that, or you can set up other scripts to identify which menu you have come from so as you know which to go back to.
However, before any of this I would want to know why you are not getting the expected behaviour on our project - my guess is that there is going to be a menu call set into a chapter marker which is over-riding the track or story menu call. If you have end jumps on markers, or menu calls on markers, remove them.

Where can I find detailed, systematic HELP for advanced topics relating to Thunderbird?

In moving from XP to Windows 7, I opted for Thunderbird as email client in order to bypass Microsoft's hyper-intrusive Windows Live Mail (I used Outlook Express for years).
I have a very complicated email structure, and it's taken me weeks (seriously) to learn how to replicate it in TBird. Now I'm trying to customize TBird further, but none of the TBird articles/forum Q&A's/Google searches address my questions.
There is no live tech support for TBird, and I'm just about ready to leave it for good. However -- one last effort: where can I find detailed, systematic HELP for advanced topics relating to Thunderbird?
Thanks.

I am no expert, but I don't know of any authoritative reference as to what elements of HTML and CSS are supported in Thunderbird. However, as I believe you appreciate, it's more than just what Thunderbird supports, but one must also think about what is likely to work in other email clients. Keep it simple. Avoid ancient deprecated tags that other email clients may not support, and for similar reasons, avoid cutting edge technology. Remember that recipients using tablets or smartphones won't appreciate large fancy email documents.
The only thing ''guaranteed'' to work in email is plain text. ;-)
If you haven't already discovered it, the Stationery add-on is designed specifically to support OE stationery in Thunderbird. Your existing stationery may "just work" in this add-on. It makes switching between various stationery templates much easier, but I'm not confident that it will affect interpretation of your CSS or HTML coding.
Your code is at least clean and minimal. Most times my involvement with troublesome templates and signatures centres on the horrible bloat and mso custom code generated by Word or Outlook.
Having said that, you and I are mortal enemies, as I don't have much patience with what you aspire to achieve. I specifically don't like background images, nor being obliged to suffer other folks' bizarre choice of typefaces and colours (but your simple 12pt black Tahoma is quite inoffensive. ;-) ) I'm of an age where my tolerance and eyesight are easily offended.
Nonetheless, I'm intrigued by how to parse the tag for the background image, as it doesn't look like a legitimate pathname to a graphics file. Does the background image actually appear as required?

Can't find remote control code for Samsung BD-P2550

Similar Messages

Maybe you are looking for