Can't find replacement screen for Folio 13-1020us

Hi everyone! If you can help me, I will appreciate it more than you can imagine.
I have an HP Folio 13-1020us that is in need of a new screen.
I found the replacement screen on the HP site; however, I run into all kinds of error messages and glitches when I try to complete the purchase.
I don't want to sound overly dramatic, but I use a wheelchair due to a spinal cord injury over 30 years ago when I was just a kid. Especially in the winter when it becomes very difficult to get outside and around in my chair, my computer basically becomes my link to the world. Plus, I am a freelance writer and editor, and I can't do my job without my laptop. I am lost without it!
I did talk to the Geek Squad at Best Buy and they wanted almost $400 to replace the screen. I'm hoping, by replacing it myself, I can save a significant amount of money. Otherwise, I'm not even sure it's worth it when I can add just a couple hundred more and buy a new computer, you know?
So...if you can help me, please do so. Thank you, in advance, for your time and assistance!

I have forwarded your post to the right people for their review. You should hear back from someone shortly via Private Message on this forum.
I am an HP Employee

Similar Messages

Where can i find a replacement screen for my 30 inch cinema LM300W01

Hi, my cinema has a broken screen and I would like a replacement screen, i would like to know where i can find one.
Can anyone help me, my monitor is in perfect condition and needs a new screen.
Thanks
[email protected]
Message was edited by: crwoo

Personally I would let well enough alone if that is the only flaw. Also it is best to replace the display panel with an exact duplicate. Usually the motherboard is different if you have the higher res screen and they are not compatible. In other words, your motherboard/video card is different than a laptop with the high res screen, probably. The cable will fit...LED is LED, but the screen will look funky if they are not compatible. So really this is not probably your opportunity to upgrade the screen. Here is your exact replacement on amazon.com at $66 which is a very good deal:
http://www.amazon.com/HP-641629-001-Laptop-Screen-1600x900/dp/B005NBNTJU
Apparently they will not say whether you get glossy or matte, but at that price who cares?.
Here is the description of the panel with the full HD resolution:
17.3-in, AntiGlare, FHD, LED, display panel for use only with computer models equipped
with an Intel processor
656297-001
http://www.screentekinc.com/HP-656297-001.shtml
They do not give the price, you have to call. It might work but can't guarantee. Partsurfer is not giving a price for either part but based on past experience, somewhere over $200 is a good guess.

How can I find out the screen size of the users moniter using the Acrobat SDK?

How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
Gregory

Currently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory

Where can I find the integrated webcam for my HP G62t-350 Notebook PC?

Just like the title asks, where can I find the integrated webcam for my HP G62t-350 Notebook PC? I have what looks like a rectangle in the top center of the screen/lid, in the bevel, but I'm not sure of how to get it to work, or if it's even able to work! I've seen pics of where there is a gray circle or dot in the middle of that rectangle, but I'm not able to see if I have one or not. Would someone please help me out here?

Click on start button under all programs in search box type in web cam. List will show above if it is installed you will see it. Other wise you need to purchased a web cam. This is how I found excess to my web cam on HP dv7 6135dx.

Where can I get a replacement screen for my iPod touch?

Where can I get a replacement screen for my iPod touch?

Uer have been pleased with this place:
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
There are many complients about this place. You can Google and find many.
DigiExpress.us - The iPad Repair Professionals

Where can I find the serial number for installation

Where can I find the serial number for installation on a photoshop subscription?

It specifically asks for a serial number to be put into a box. Any thoughts?
Thanks!!
Date: Tue, 11 Dec 2012 05:33:37 -0700
From: [email protected]
To: [email protected]
Subject: Where can I find the serial number for installation
    Re: Where can I find the serial number for installation
    created by Rave in Downloading, Installing, Setting Up - View the full discussion
Hi memorse414414, Your Adobe ID will suffice for activation. For subscription, the installer would validate from the server using your Adobe ID.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4911902#4911902
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4911902#4911902
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4911902#4911902. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Where do I find the admin screen for my airport extreme?

I need to make some changes in my airport extreme to allow it to connect to my Direct TV. I can't find the Admin screen anywhere.

In the airport utility.. that is the only way apple provided for admin of their range of routers..
There is Airport utility for Mac.. PC up to Win7 which does seem ok on win8.. and iOS. Just download it if you don't have a Mac.. for Mac since about Snow it is included in the OS.

Where can we find the standard program for scripts and smartform for vl02

where can we find the standard program for scripts and smartform for vl02
regard,
anil

If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers

How can i find the exact BADI For a Particular Transaction

hi ppl,
How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

Use this code:
*& Report ZGET_BADI
REPORT ZGET_BADI.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
*Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
*Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
*For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Regards
Vinayak

Error "Sorry, something's wrong. We can't find a mobile number for this account"

Hi, I received a Summer SIM yesterday (the 100GB/month SIM) and put it into my iPhone 4S. I registered with the EE website and received the verification text, all good so far... When I go to top-up my account online with £10 it comes up with a red error message at the top of the screen: "Sorry, something's gone wrong""We can't find a mobile number for this account. Please associate one with it" screenshot:http://i.imgur.com/nt4Q5sA.png Yet despite this if I look in "my account" it lists my account number and mobile number ( https://myaccount.ee.co.uk/my-account/ ) I tried topping up anyway (despite the red warning) but it just gave me an error at the end ("TOP UP MY DEVICE - ERROR") I also tried going via http://ee.co.uk/ee-and-me/top-up-pay-as-you-go but again I got an error I don't have any credit on my new SIM so I can't call and pay 25p to speak to someone - are there any mods/customer service people on the board that can sort out my account? This is not a great start to using the EE network :/

Hi, thanks for the reply Some other responses to the same question posed on the forum have been replied to by a mod asking the original poster to PM them (and I assume they were able to fix the problem?) >>Did you set up this a/c separate from any other a/c's you may have? No - this is the only EE account I have, created it last night and verified the mobile number by text. >>No one here can have access to your a/c. You need to phone EE. The problem is to speak to someone you need 25p credit on your SIM (which you won't have if you're a brand new customer wanting to top up for the first time) I've found a mobile number for customer services (07953 966250) on the forum that I called from a different mobile and after 15minutes on the phone they have now topped up £10 on my account. I checked and the red warning no longer appears on the top up page. I'm still waiting to see if the "SUMMER100" promo has been properly applied and if the " STOP PACK" / "YES" works, but at least I am now over the first hurdle.

Error!! Can not find the delivery details for the delivery Id :

hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
Ronny

I guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local.

Nternal ERROR: Can not find the ACL containter for object ...

We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
Neither in metalink nor in the oracle forums I could find any hint about that error.
Can anyone help??
Thanks in advance, Maren
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
     at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
     at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
     at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
     at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Hi Maren
Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
fco.classname = 'CMPACLContainer' (Maren's)
and the other
fco.classname='CMPMap' (Oleg's).
Was this intentional Maren on your behalf for your problem to be fixed?
We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
Thanks
Edwin

HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6". Where can I find it? Thanks for

Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

How can I find my serial number for Adobe Acrobat 11. I got a new iMac and I don't want to use the new version at £18.00 per month. I don't need it. Thank you

I used to use CS5 and I want to use the Acrobat version on my new iMac.
How can I find my serial number for Adobe Acrobat 11. I don't want to use the new version at £18.00 per month. I don't need it. Thank you

Hi Anthony Aduhene
Please refer : Find your serial number quickly

Can't find replacemen​t screen for Folio 13-1020us

Similar Messages

Maybe you are looking for

Can't find replacement screen for Folio 13-1020us