Can't find Single Page Mode

Hello, everyone!
I have a strange problem with my Digital Edition. I can't find the single page mode button or any other mode change button on it. I have tried re-downloading but it hasn't worked. I also tried Shortcut Keys but to no avail!
Please help!
Thanks in advance.

An Open Firmware password is one thing that would prevent you from changing the startup disk, booting from a CD or starting up in single user mode. You would see a lock and a dialog asking you to enter your password. So, it doesn't seem that this is your problem.
If you have some file directory damage, you can use the Tiger install DVD to attempt to repair it. Put the DVD in the drive, restart and hold down on the "c" key (if you have one and then choose the language you want to use. At the next screen, do not continue to install but choose to open the Disk Utility from the Utilities menu. You can then use the Disk Utility to "repair disk" on your hard drive. The Tiger Disk Utility is pretty mature and can repair many problems.
-Doug

Similar Messages

  • Large pdf files only work in single-page mode

    Does anyone know how to sort this out? I have a 3500 page PDF file and as I scroll to the *** end of the file, I can no longer view it in continuous mode as it keeps flickering. It loads properly in single-page mode, though.

    Hi Retso
    Sorry for not replying earlier. I've been conducting a
    RoboHelp HTML class all day.
    Are you using RoboHelp HTML 6? If so, there is a new option
    labeled "Mark of the web" that could be nailing you. When you
    generate your WebHelp by double-clicking the layout, see if this
    option is enabled. If so, disable it and your PDF links should
    begin working. Note, however, that by DE-selecting this option, you
    could start seeing the Yellow Information bar as Internet Explorer
    ever so helpfully deems this as a security threat and blocks your
    WebHelp until you click it and allow the content to be shown.
    Cheers... Rick

  • Firefox sometime can find specific server then at other times it can not. Also when on a web site and you attempt to go to anotherpage on the site, it lock up or can not find the page.

    Firefox cannot find a server that it has gone to easily in the past. Also it will lock up or can not find a page with in a web site ie like with FoxNews and you want to read and article. Firefox cannot find it. Sometimes I can not even log on to FireFox.

    Hi Corel
    Thank you for your reply
    However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
    So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
    How do I do this please
    I have no bother with this on Win Internet Explorer but I like Firefox
    Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
    But I would appreciate knowing the correct solution from an expert

  • I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

    Hi to the Mac Folks,
    I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
    I primarily print photos from Photoshop CS5.  The term Page Set-up has gone missing in the file pull down menu. Can't make any choices  There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
    Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
    Preview has no "Page Setup" - or does it?
    Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
    Woody

    Hey,
    if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders.  You can then navigate all the contents as normal.
    HTH,
    S.

  • IWeb can't find previous pages after transfer/reinstall

    I recently got a "new" (read: my husband's previous) MacBook Pro and lost some of my files/folders due to a problem during the transfer.  I had to reinstall iWeb and now it won't find the pages I had created and published previously with it.  The pages are in their own folder (SuzWebPages) as I had to manually restore them instead of letting the computer copy everything over.  When I open iWeb, it can't find the pages.  I have looked through other help topics on this and tried moving the SuzWebPages folder to the iWeb folder in Home Folder/Library/Application Support/iWeb and renaming it to a .sites2 file, but iWeb still doesn't see the folder/site/pages and opens with the choose a new page screen.  When I right-click and choose Open With on the actual pages, iWeb is grayed out.
    I went from Yosemite 10.10.1 to the same version.  I had to reinstall many programs which did not transfer or were corrupted, such as MS Word, Safari, and Mail, but all were able to find my previous files although none retained my information.
    Any suggestions?  I can provide any further information needed.
    Thanks in advance,
    Suz

    The file/package you need to have for use with iWeb is called Domain.sites2.  The folder containing your published webpages is of no use with iWeb.
    If you still have your old Mac go to your Home/Library/Applications Support folder and look for the iWeb folder. It will have the domain file you need.  Copy the iWeb folder to the same location on your new Mac and launch iWeb.
    Otherwise you'll have to rebuild your webpage from scratch.  If you have to do that I suggest you switch over to a new web development application as iWeb has been discontinued for about 2 years.
    One app that many have migrated to because it is so like iWeb in its user interface and how it works (but with many more features) is EverWeb.  There's a 30 day demo version that you can try to see if you like it.  To recreate your website with it you can copy text and photos from your existing site and paste into the EverWeb version.
    For other potential iWeb replacement apps search the iWeb forum for "iWeb alternative" or "iWeb replacement".

  • Preview can not find linked pages

    When previewing my index page I click on the links created
    using flash buttons and they can not find the pages on my hard
    drive. The flash buttons are incorporated into my basic template as
    a library item. When The error occurs the page address that is
    being looked for is shown as follows:
    file:///C:/KECSITE2/kecpartyfiles/Moonwalk-Bouncehouse-rental-Massachusetts-Connecticut/bo uncers_moonwalks.html
    If I click on the same link while previewing other pages ,
    the page is found and the address is as follows:
    file:///C:/KECSITE2/kecpartyfiles/KECPARTY%20SITE%20FILES/Moonwalk-Bouncehouse-rental-Mass achusetts-Connecticut/bouncers_moonwalks.html
    the page is displayed.
    all the regular html links work when previewing on all pages
    and there are no broken links found when I check links site wide.
    and the links both flash and html all work when published. This
    only started when I added the flash buttons as links.
    Is it possible I changed the way the preview works?

    suggestion one:
    Go into dreamweaver Preferences->Preview in Browser
    put a checkmark in "use temp files for preview"
    Suggestion Two: Do Not Use Flash Buttons.
    Just don't
    there are ten possible reasons this isn't working. If you
    just used text
    links to the other pages, there wouldn't only be two possible
    reasons it
    isn't working.
    again- suggest you don't use Flash Buttons or Flash Text.
    There's a reason adobe finally listened to us and removed
    Flash Text and
    Flash Buttons from CS4.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • I get a 404 error when accessing my website which is supported by Apple.  The message says that the server can't find my page.  My browser is Safari.  How can I fix this when it just stopped working today?

    I get a 404 error when accessing my website which is supported by Apple.  The message says that the server can't find my page.  My browser is Safari.  How can I fix the problem when it failed just today?

    If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
    (116252)

  • I get a 404 error when accessing my website which is supported by Apple.  The message says that the server can't find my page.  My browser is Safari.  How can I fix this?

    I get a 404 error when accessing my website which is supported by Apple.  The message says that the server can't find my page.  My browser is Safari.  How can I fix this?

    If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
    (116252)

  • HT4250 Does anyone know where to get a copy of the OS X 10.6.5 update?  Apples' site says it can't find the page and the only other downloads i've found on the net say you need to have 10.6.5 to install 10.6.5.  HUH?

    Does anyone know where to get a copy of the OS X 10.6.5 update?  Apples' site says it can't find the page and the only other downloads i've found on the net say you need to have 10.6.5 to install 10.6.5.  HUH?

    It's right here from Apple, at least for me. 
    Combo http://support.apple.com/kb/DL1324
    Delta  http://support.apple.com/kb/DL1325
    Any reason you want the 10.6.5? You do know that the latest and final is the 10.6.8.

  • Can not see training videos - message "We can't find the page you are looking for, please return to the Apple Support homepage?

    Can not open Training Videos shown on Apple Site - message comes us " we can not find the page you are looking for - please return to the main Apple Site"? Help

    You've used the wrong name for the folder that holds the html page.
    http://web.mac.com/artworksforyouth/iWeb/Site/Home.html
    Is what it is trying to find (and it doesn't exist).
    www.artworksforyouth.org redirects to www.artworksforyouth.com which then redirects to your iWeb page.
    Rather than the word "Site" in your URL you need to use ArtWorks%20for%20Youth

  • Safari can't find a page

    I have done a reset, a reload, empty cache...  Sometimes I reload the page 15 times before Safari finds the page.  This started happening right after I upgraded to Lion (10.7.3).  I have a summer 2007 Mac with 2.4 GHz Intel Core 2 Duo processor and 2 GB 667 MHz DDR2 SDRAM memory.  Thank you!

    Mari...
    There's help for the Safari can't find a page / server issue...
    Use OpenDNS for better speed, more security, and it's free.
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Click +
    Enter these numbers exactly as you see them here.
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK and restart your Mac.
    More about OpenDNS here >  Topic : Manually provided DNS server addresses are higher priority than DHCP's

  • Try to preview my site with Safari, but Safari says it can't find the page, what should i do???

    Try to preview my site with Safari, but Safari says it can't
    find the page, what should i do???

    Post a link to the page, please.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "NikoNeedsHelp" <[email protected]> wrote in
    message
    news:fq2flr$dma$[email protected]..
    > Try to preview my site with Safari, but Safari says it
    can't find the
    > page, what should i do???

  • HT4356 How can we print single pages, such as 1,4 and 8 instead of printing all pages?

    On an iPad, how can we print single pages 1, 4 or  8 or 2, 4 and 7 instead of having to print all pages?

    Thanks, Alex!
    ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
    I don't try second approach, because at this time I have only one report
    I try also with VB macro: this is better (print3.vi) but.....if I use:
    Sub Print_Pages_From_To()
    ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
    End Sub
    is ok; print the pages selected; if I use:
    Sub PrintPages()
    ActiveDocument.ActiveWindow.PrintOut  Pages:="2-3"  
    End Sub
    printer print all pages.
    what do you think?
    regards,
    Italo
    Attachments:
    print Problem.jpg ‏39 KB
    print4.vi ‏19 KB
    print3.vi ‏19 KB

  • I am trying to finish an online class and Google keeps popping up on my screen telling me it can't find the page I'm searching. Get Google OFF MY COMPUTER!!

    I am using Firefox while watching online class. I attempt to go to another page and a Google page pops up telling me that it can't find the other page.
    First of all, we are talking about something common like facebook.com or youtube.com.
    Second, I'm not using Google for anything; my search engine is Bing.
    Third, I despise GOOGLE.
    How the heck do I stop having anything Google interfere with my browser?
    I am ready to use another browser if it will get Google off my back.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How can i set SINGLE PAGE. ENABLE SCROLLING as default view?

    how can i set default setting for view? I would like to set DO NOT SHOW GAPS BETWEEN PAGES. SINGLE PAGE. ENABLE SCROLLLING as default view.

    For viewing PDFs without embedded IV options you can set values under Preferences > Page Display, but if a file has the zoom or scroll mode defined in its properties, those will always win over the application defaults.

Maybe you are looking for