Can't find the camera move behavior & 3D scene icon for the camera

Since a couple of days I've been playing around in the 3D environment in Motion 3.0.1
Unfortunately I can't find the (official) "camera move behavior" as used in the templates with comes with Motion 3. This particular behavior must be used to animate camera moves as far as I understand.
Furthermore I can't find the 3D scene icon for the camera. By having this representation of the camera it would be a lot easier to follow what the camera is looking at along it's motion path.
Thanks in advance for your help. . .

Hi gents,
First of all thanks for your input!
I've found the solution for my missing 3D camera icon.
When I'm in (3D) perspective mode I found out that per default Motion doesn't show the camera icon.
I've to zoom out of the 3D scene to actually see this camera icon. As per default the view is inside from a gigantic camera, which is only visible when I zoom out.
Furthermore I understand that I can animate the camera via it's own transform properties. But I was just wondering where the camera move behavior as used in the templates with comes with Motion 3 came from.
Thanks and have fun over there!

Similar Messages

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

I can't find an option to add a recovery email for the purpose of resetting my security questions. There is also no option when I am in the "manage my account" area that lets me reset my security questions. How can I reset them?

I can't find an option to add a recovery email for the purpose of resetting my security questions. There is also no option when I am in the "manage my account" area that lets me reset my security questions. How can I reset them?

1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for support
        and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions
5. For online assistance use Apple - Support - Express Lane

Where can I find a document's or folder's GUID for the FLD_MOVE service?

We are currently migrating to Webcenter Content 11.1.1.6 using FrameworkFolders. We need to integrate with several other systems to check-in and retrieve files and would like to place our content in a folder-based heirarchy. I have been using the Generic Web Service to perform integration functions.
I am trying to use the Folders Services to get information about folders and place files into specific folders.
First of all, if I check in a file using the "CHECKIN_NEW" service, what folder does the file go into? I can search for the file, but it doesn't seem to belong to a folder? As far as I can tell, the only way to retrieve the file is to search for it. Shouldn't it go to some folder by default?
Second, lets say I want to move that file to a folder. The "FLD_MOVE" service seems to be what one would use to place a file into a folder. The parameter (item1) that is used to identify what you want to move can take either a GUID or a path to the file. I can't use a path since the file doesn't seem to have a path. I have tried using the dID and the dDocName as the GUID parameter, but the service always comes back and says my item does not exist.
I can't find any other kind of unique identifier for my document. I have searched and searched for what the GUID could be and how to find out what it is. GUID seems to be specific to the Contribution Folders and Folders Service, as none of the other services reference GUID.
What is a GUID and how can I figure out what a document's GUID is?

Very good advice on turning on the auditing. I found a link to how to do this in another post. It seems the documentation around the services lacks the information necessary to use them, but the audit logs can reveal what parameters need to be used to perform an action.
Turn on server-wide tracing for request audit http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/c03_processes.htm#CSMSP536 and then create the link from GUI (maybe DIS). You will find your answer in the Server Output.
By turning on the audit logs and using the browser UI to place a document into a folder, I found this in the audit log (cleaned up for readability):
IdcService=FLD_CREATE_FILE
fFileType=owner
fParentGUID=3BCD5A4050F2D10D9C0A0CF3CC8840C1
dialogCounter=4
dDocName=USTST-PFARPIM000808
constructDidCreateLinkDialog=1
dID=807
idcToken=1370802991160%3A01FCE7B4B65CB3E48EDC2A1982C62526
constructDidCreateLinkDialog=1
IsJson=1
Calling the web service using the parameters in bold performed the folder assignment of a document using the document's docName value (which is readily available in the GUI).
Thanks!

How can I find out what my password that set up for the administrator user on my Mac book pro

Hello I am trying to upgrade my flash player and it is asking me to put my password but for the life of me I can fIgure out what it is I have checked the two I always use and no luck

Read this

HT1657 How can I find a specific movie I want to rent in the Itunes store?

It's easy to find the movies they want me to rent, but how do I find the particular one I am looking for?

Ok. I found it. I just had to look for a movie that is actually on Itunes.

Wher can I find a .jar/.jad converter to .alx/.ali for the curve?

I need to be able to convert .jar/.jad to .alx/.ali so I can use a software program i have. I believe the .jar/.jad is JAVA?
I have downloaded the file to the media card, but I see no options to open the software from the phone. The desktop software for blackberry doesn't recognize these file types and wont load the software.
Any help is appreciated.

try this
http://www.blackberryforums.com/aftermarket-software/124657-j2a-1-4-convert-jar-files-cod-easily.htm...
If someone helped you give them kudos. Research all info!

My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message.

My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

Don't tell us, tell them
http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback

Can´t find all my movies from itunes in apple tv. has already restarted apple tv and have the latest update for both itunes and apple tv. my music library works however

can´t find all my movies from itunes in apple tv. has already restarted apple tv and have the latest update for both itunes and apple tv. my music library works however

Welcome to the Apple Community.
Have you looked in home videos

Photos 10.10.3 will not let me play or move my videos and keeps sending a message saying "can not find file". What do I do to get the videos back?

Photos 10.10.3 will not let me play or move my videos and keeps sending a message saying "can not find file". What do I do to get the videos back? It is only during videos that I previously uploaded off my phone. It loads them and tells me how long they are but when I go to press play it says can not find file. I have restarted my computer, what else can I do?

Check the information on the song, Right-Click -> Get Info.
In the fist pane, (Summary), you will see the AppleId (Account Name) that was used to buy the song.
Be sure to login to use this account to register this computer to play the song
What I often see, Is that people have many different AppleID, sometime not even knowing it, which is a big problem.

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
See: Keywords or ratings are applied only to one of the selected images - why?
Uncheck the little square button with the "1".

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

: Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
The FP-1000/1001 seri
al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
Regards,
Aaron

I can't edit my donwloads. The organizer photos have an orange icon at the top left corner and the find offline volumem - edit pops up when I try to edit the pictures. Also, the downloaded pictures don't show up in "My Pictures" document.

I can't edit my donwloads. The organizer photos have an orange icon at the top left corner and the find offline volumem - edit pops up when I try to edit the pictures. Also, the downloaded pictures don't show up in "My Pictures" document. How can I fix this problem

Did you recently reconfigure the drives attached to your computer or move to another computer?
To help with troubleshooting this, download and run the utility psedbtool:
http://www.johnrellis.com/psedbtool/#_Downloading,_Installing,_and
Copy and paste the output here (using the Web, not email).

Can't find the camera move behavior & 3D scene icon for the camera

Similar Messages

Maybe you are looking for