Can't find the data sheet for Router MI 424WR RevI

I went to the ActionTec sight and looked up MI424WR Rev I router with firmware 40.19.22 and found nothing. Anyone know the specs, is this Wireless N? I am also surprised it isn't a Gigabit switch. But other posts say that if both lights are on it is a Gigabit switch. I am confused. So hense I need the manual.
Solved!
Go to Solution.

My Actiontec Rev I came with a CD that had a .pdf copy of the manual on it. If I were allowed to upload a 14 MB file here I'd post that manual for you.
In any case, the Rev I is definitely 80211.n and definitely has gigabit LAN ports. As you've read elsewhere, one light on a LAN port can be flashing indicating 10 mb or 100 mb. If both lights are flashing it's a 1000 mb (gigabit) connection.

Similar Messages

Can't Find the Data source 0GLACCEXT_T011_HIER

Hi,
i am working with B I 7.0, ECC 6.0.
Trying to Implement Balance Sheet for New General Ledger Account.
I can't Find the Data source for the Hierarchy 0GLACCEXT_T011_HIER
But Info object 0GLACCEXT is available and
i find the Infosource 0GLACCEXT ,but this is 3.5 version.
I check some SAP notes
663945 -- Transfer Rules for 0GLACCEXT Info object
<b>but My B I Content is 703</b>
Do I need to follow this SAP note ?
I had check this Link Too, but I uable to solve my problem
Re: 0GLACCEXT vs 0GL_ACCOUNT - How it is USED?
any Idea
Thanks
Prasanna

Pam,
BI 7 does not support hierarchy datasources. For implementing hierarchies (BI 7), you have to use BW 3.X infosources/transfer rules.
Hope that helps.
Thanks

Where can i find the conversion exits for date

hi
where can i find the conversion exits for date

Hi,
Use function modules to convert data into fiscal year and week.once you get week then you can calcute period,
quarter and half years based on that week.For this the function modules are
1..UMC_CALDAY_TO_FISCPER
2..DATE_TO_PERIOD_CONVERT
Regards,
swami.

Error!! Can not find the delivery details for the delivery Id :

hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
Ronny

I guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local.

How do I reload my bookmarks if I can't find the 'date.json' file in my backup?

My hard drive crashed and everything had to be retrieved and reinstalled. I have a folder of old Firefox data but can't find the 'date.json' file that is indicated to open in the troubleshooting instructions. Is there another option?

Hello,
If you have the latest Firefox version, the ''places.sqlite'' file is what holds your bookmarks. Please see the article [[Recovering important data from an old profile]] for more information.

Where can I find the serial number for installation

Where can I find the serial number for installation on a photoshop subscription?

It specifically asks for a serial number to be put into a box. Any thoughts?
Thanks!!
Date: Tue, 11 Dec 2012 05:33:37 -0700
From: [email protected]
To: [email protected]
Subject: Where can I find the serial number for installation
    Re: Where can I find the serial number for installation
    created by Rave in Downloading, Installing, Setting Up - View the full discussion
Hi memorse414414, Your Adobe ID will suffice for activation. For subscription, the installer would validate from the server using your Adobe ID.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4911902#4911902
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4911902#4911902
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4911902#4911902. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Where can I find the xsd file for SQL2012 .dtsx files?

Where can I find the xsd file for SQL2012 .dtsx files?
Tom G.

I would start here.
http://msdn.microsoft.com/en-us/library/gg587789(v=sql.105).aspx The xsd is spread out over several of the appendices.
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

Can i find the date i created an event on my calendar

can i find the date i created an event on my calendar

You could use the search field in the upper right, if you can't remember the day of the event and e.g. search for the name of the event.

Where can we find the standard program for scripts and smartform for vl02

where can we find the standard program for scripts and smartform for vl02
regard,
anil

If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers

I have a serial number of my iPad, but I can't find the date of purchase!

Hello,
I have an iPad 2. I would like to know if the warranty has expired and I put the serial number into the apple support box for verifying the warranty.
Well, it says that has expired, but the thing is that I don't know when the date of purchase was. I need help, because I supposed that the iPad came with the AppleCare Protection Plan and it was purchased as well.
Does anyone knows where can I finde the date of purchase?
Thanks!

The product registration page will show if the product is covered by AppleCare or not. go to Product Registration and see what shows up for your iPad 2.

How can i find the exact BADI For a Particular Transaction

hi ppl,
How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

Use this code:
*& Report ZGET_BADI
REPORT ZGET_BADI.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
*Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
*Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
*For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Regards
Vinayak

How to find the data flow for a given module.

Hi ,
Is there a way to find the data flow for a given module(Example AR,AP,......).
I mean are there any predefined document other than user guides that explains with data flow diagrams(including the tables involved).
Any help would be greatly appreciated.
Thanks & Regards,
Naveen.

No such public document available from Oracle unless from Oracle Education.
for some specific operation you can check Process tab inside Oracle Application which shows the data flow as part for workflow process.
Regards
Prashant Pathak

Where can I find the date when the pre-sale movies will be released?

Where can I find the date when the pre-sale movies will be released?

Hi Claudia1950,
Thanks for visiting Apple Support Communities.
According to the following article on iTunes Store pre-orders, "Most pre-orders will show an expected release date near or below the pre-order button."
You may also find this information helpful:
When a pre-ordered item becomes available, you will receive an email letting you know that you can download your pre-order.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
Best Regards,
Jeremy

Nternal ERROR: Can not find the ACL containter for object ...

We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
Neither in metalink nor in the oracle forums I could find any hint about that error.
Can anyone help??
Thanks in advance, Maren
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
     at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
     at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
     at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
     at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Hi Maren
Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
fco.classname = 'CMPACLContainer' (Maren's)
and the other
fco.classname='CMPMap' (Oleg's).
Was this intentional Maren on your behalf for your problem to be fixed?
We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
Thanks
Edwin

How can I find the serial number for my creative suite CS6 I bought it from a store.

How can I find the serial number for my creative suite CS6 I bought it from a store.

https://www.adobe.com/account.html for serial numbers or subscriptions on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Can't find the data sheet for Router MI 424WR RevI

Similar Messages

Maybe you are looking for