Can't find the harddrive connected to AirPort Extreme from NETGEAR EVA9100

Hey all,
Like the subject sais... I have a setup in my appartment where I have a USB Harddrive connected to my AirPort Extreme. I put my media on that disk, and now I want to access these files from my new NETGEAR EVA9100 media streamer, but for some reason it can't find the harddrive in my network.. My MBP has no problems finding it, nor have any other computers. I have tried numerous ways of sharing the disk through the airport software, but for some reason it just won't work.
Does anyone have an idea what I need to do..?

If the hard disk shows up when it is connected directly to the base station, then I would try a different powered hub.
Otherwise, the hard disk drive may not be compatible, or perhaps it is incorrectly formatted as NTFS.

Similar Messages

How can I find the router number for airport extreme card?

I am trying (unsuccessfully) to wirelessly connect my PlayStation 3 to my iMac Duo using the built in Airport Extreme Card.
Can someone please tell me how to find the router number for the built-in Airport? I am using OSX 10.4.9. The wireless card type on my Mac info is "Airport Extreme (Ox14E4, Ox89)".
Thanks in advance.

Since the iMac is using OS X's Internet Sharing, the iMac is acting as a router. The router IP address created by the iMac is dependent on the IP address assigned to the iMac. The first 2 numbers are the same but the last 2 are .2.1.
For instance:
If your iMac is getting an IP address of 192.168.0.200 your Mac's router IP address will be 192.168.2.1
Similarly, if your iMac is getting an IP address of 10.0.1.200 your Mac's router IP address will be 10.0.2.1
So
Open Network Utility.
Click on "Info". Under "Please select a network interface for information" select "Network Interface (en0)" to see what IP address the iMac has been assigned.
Click on "Info". Under "Please select a network interface for information" select "Network Interface (en1)" to see what IP address the iMac is using as the router address on the wireless interface.

Can't find disk drive connected to airport extreme

I have airport extreme 802.11n gigabite connected to a usb hub and a hard disk connected to the usb hub.. The disk is a usb disk drive the disk doen't show on the desk top and disk utility doesn't show them
help

If the hard disk shows up when it is connected directly to the base station, then I would try a different powered hub.
Otherwise, the hard disk drive may not be compatible, or perhaps it is incorrectly formatted as NTFS.

Can't find the printer connection on Satellite M40

Silly question but I can't find the printer connection on my satellite M40? There looks to be a place for it on the left hand side of the notebook - there is a little printer sign, but the actual socket is covered over - should I remove it? and how do I do it? Help!!

Hello
As far as I know you can connect printer directly if you use USB port (newer printers). On the left side there are three ports:
- RGB (Monitor) port
- One USB port and
- PC Card slot
I really do not understand where you have found printer sign there.

Where can I find the serial number for LOGIC PRO from the AppStore

Please help me:
Where can I find the serial number for LOGIC PRO from the AppStore?
I bought and downloaded the application, now it asks me for the serial number but I didn't not receive it or can find it.

My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

Can we find the number of rows in table from the dump file

Hi All,
Can we find the number of rows in table from the dump file with out importing the table in to the database?
Please let me know ,if any option is there.
Thanks,
Kumar.

<s>Try to import with option SHOW=Y, that should skip the number of rows which are into a table from a dump file.</s> 
 
Nicolas. 
Oops, sorry, that doesn't show the number of lines... 
Message was edited by: 
N. Gasparotto

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

"Safari can't find the server" - connection issues under Lion

Hi there,
Since upgrading to Lion, Safari has been displaying this odd and annoying behaviour, where, for some links to some web resources (like maybe 2 clicked links out of 10), it throws up a grey error page telling me it can't find the server (screenshot below):
Normally, this error would be evidience of an intenet connection issue (but it isn't). If I immediately try to find the same resource via another browser (Firefox or Chrome), those other browsers navigate to the site absolutely fine. Although, occasionally (though with less frequency) I'm also getting a similar "Can't find stuff" error with Chrome too.
In the Safari address bar (is this significant?) there isn't even a URL, but a file path to file:///Applications/Safari.app/Contents/Resources... what does that mean?
Hints from other threads would indicate that this is a Firewall issue, or maybe there's another third-party app causing problem, rather than a problem with Safari under Lion specifically.
But I'm really bugged and irrittate by this. Anyone had a similar experience? Anyone with any ideas? How might I go about finding out what's causing this and fixing it?
Best wishes,

It's most likely a problem with corrupted files in the Safari Cache or corrupted cookies.
Go to Safari menu bar
Click on Safari
Click "Empty Cache"
Restart Safari
If the problem persists...
Go to Safari -> Preferences
Go to privacy
Click "Remove All Website Data"
Restart Safari
Cheers - Lupunus

HT4259 I got a new iphone 5 and can't find the password for my airport. How do I go about finding this?

I just recently got a new iphone 5 and would like to use the airport wifi in my house. But I can't find the pass word for the airport. Can anyone guide me in how to find this please? New to mac.

Please check out the following AirPort User Tip for help with AirPort passwords.

TM not showing the drive connected to Airport Extreme....

Hi
I've been backing up to a USB drive connected to Airport Extreme since I installed Leopard with no problem.. Since 10.5.6 it stopped working. I ended up erasing the drive, reformatting it, reseting the Airport Extreme, repair permissions, used Onyx and Applejack and still this is what I'm getting:
When I go select the drive from the TM prefs. it doesn’t show. If I connect it to the laptop first. accept the TM offer to use it as its HD and connect it back to the Airport. I can mount the drive but when trying to start a manual back up. TM gives me the msg. “The back up volume is not in Mac OS Extended (journaled) format which is required”. I formated the drive one more time, just in case and same thing. Last I did a full back up with another drive having it connected directly to the USB port and it worked fine.
I am running all this from my main Admin profile with file vault enable. I have another Admin profile without the file vault enable as an emergency because of a past experience and don’t really use it. and I have the guest acc. enabled.
Does anyone have any ideas??
Thank you.

backups to directly attached drives work differently (and are stored differently) from network backups. they are not interchangeable. also, while in the past TM backups to air disks worked, they are not officially supported by apple so it's possible that 10.5.6 update broke that functionality. You can try the following terminal command which helps to show unsupported volumes.
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
see if the airdisk shows up as a possible TM disk after that.

Can i extend the range of an airport extreme with another airport extreme and use the ports on the airport extreme i used to extend the network?

That seems like a complicated question.
I have a Time Capsule (which the HD *****, but that is matter for another discussion) and want to extend the range with an Airport Extreme because I have 2 devices in one room that do not do wireless but have Ethernet ports.
The room has iffy WiFy connectivity too.
I want to know if the 3 ports on the Airport Extreme still work after configuring it as an extender rather than a router.

The thing is that I want to know if I can put the Airport Extreme at the edge of the room where the existing Base does not reach.
This will not work.
Remember, an "extending" AirPort can only extend the quality of wireless signal that it receives. For that reason, it must be located where it can receive a strong wireless signal in order to work effectively.
For example, let's say that your "main" router was on one end of the house and you want to extend the signal to reach the other end of the house. In this case, you would locate the "extending" AirPort about half way between the main router and the other side of the house.

I can't find the music I purchased via iphone4 from itunes on my laptop

I am using the same account to log in that I use on my phone. The only thing I had was a download of the digital booklet. The music is on my phone still. I also can't find the music I purchased on my old phone a few months back. that is all lost. please help... thanks

If the music was purchased using iTunes on your iPhone you will need to transfer it from the iPhone to the laptop. When iTunes is up, and your iPhone is connected and showing under devices, right-click on the name of your iPhone, and select transfer purchases, all of the purchases will transfer to the laptop, but will still be on the iPhone.

ITunes update corrupted some of my music files so iTunes can't find the file, nor music I bought from the iTunes store.

After an iTunes generated update of iTunes, some of my music can't be accesed any more. When I try to play the file, iTunes says it can't find the link. This also happens with music I purchase from the iTunes store, so I've lost all this music; do I have to re-buy the purchased music again? My iTunes program is on my C drive, and the music library is on my D drive. In iTunes, I've set the ripped music to be placed in my D drive. The lost links are on some music files, but not others which do play music. Some compilation music files were split up into individual files, usually without LP art attached. Some album art was placed on wrong albums as well. Music with lost links have a ! mark beside the song name. File info says the link is on my C drive, but I can't find it there. Any ideas on how to get these lost files back. Thanks, Moizy.

Try this...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Can't see USB hd connected to airport extreme w/ iPad

Plugged external hd in airport extreme but can not see using IPad .I have downloaded app for airport & can find airport but does not show hard drive. How can I access files on external hard drive?

Unfortunately you can only access hard drives plugged in airport extreme or time capsule, from a Mac or a PC. iOS devices (iPad, iPhone, iPod touch) do not support this feature.

My iMac and iPad keep loosing the wireless connection to Airport Extreme issue started after I installed Lion?

Since installing Lion, I have been loosing my connection to airport Extreme after I have put my IMac in sleep mode. My Ipad is also loosing the connection. This issue started since the installation of Lion, is anyone else experiencing the same thing?

I've had that problem on my macbook running 10.5.8 for a few years. Sometimes it's worse than others. No other computer in my house has this problem.

Can't find the harddrive connected to AirPort Extreme from NETGEAR EVA9100

Similar Messages

Maybe you are looking for