Can't find the iBahn wireless network here at the Anaheim Marriott.
I'm using the iBahn wireless network offered by the Marriott for my laptop, but my iPad2 will not even pick up the signal. It is a pay connection, will this cause the ipad to not even recognize the signal? How do I get that changed so that I can actually use the ipad?
How did you have to sign up for the network on your laptop? It could be a hidden network thus not broadcasting its SSID and you will not see it. To connect to a hidden network you use the join other option and the the SSID, security type and password.
Similar Messages
-
Apple tv can not find my hidden wireless network
Am trying to install Apple TV 2nd generation.
I use a hidden wi fi network.
I enter the name of the network when prompted, but Apple TV says it can not find the network.
All other devices in my home have found the network.
What could be the problem?Just disable the hidden network feature so that the Apple TV can see the SSID .Once connected you can reset it .By the way a Hidden Network isn't a security feature .
-
Airport Express can't find D-Link wireless network
Hi all,
I'm on my third AirPort Express. I'm trying to use it in client mode to connect to a D-Link DIR-655 WAP, so I can run AirTunes. The first unit was a Best Buy refurb that I was able to configure fine, but it kept dropping the connection and having other issues, so I returned it. The next two units were fresh from the Apple Store. NEITHER has been able to even find my D-Link SSID - it's not listed in the list of networks to join in client mode, and entering the SSID directly doesn't work either. I've tried resetting both the Airports and D-Links multiple times, changed SSID/broadcast/channel settings, tried turning wireless security on and off... ALL my other wireless devices have no issues whatsoever finding and connecting to the D-Link. This includes a '06 iMac, iPhone 3GS, iPhone 4, iPad, iPad2, PowerBook G4, MacBook Pro, Sony VAIO laptop, the first refurb AirPort Express... you get the point. I put in a call to Apple for the 2nd unit, and they said the radio must be broken, so I exchanged for the 3rd unit, and it still doesn't see the D-Link. Losing my mind here! Any suggestions would be greatly appreciated.
Cheers,
MarcWelcome to the discussion area, bob36!
To do what you want, you'll need the AirPort Express 802.11n. The model number, visible in the fine print on the side is A 1264.
Is this the model you have? If so, post back for some configuration tips to enable the ethernet port.
If...you have the older version of the AirPort Express, model A 1084, unfortunately this version will not allow you to do what you want to do unless your main router is also an Apple device and you re-configure both devices to particapte in a Wireless Distribution System (WDS).
The downside to the WDS is that it will drop your entire network down to "g" level speeds and cut the bandwidth by 50%. -
Computer can't find printer on wireless network
Hi
I have a HP laserjet pro 200 m276nw and it is connected to my WIFI, but when im tryin to add the printer under printers and faxes, it dosn't show. Windows just keeps seaching the network but it never showes. Does anybody have an idea about what's going on?
Im running windows 7 on my computerHey mortensmedegaar,
It sounds like you are trying to install the LaserJet Pro 200 M276nw via the Windows: Add a Printer feature. Have you tried installing the printer with the full driver software provided on the HP support website?
If not, then I would advise attempting to install via this software package. Before doing so I would advise a couple of steps to ensure the network is on a fresh start and the printer is recently connected.
Power cycle the router and wait for it to completely power back up before proceeding.
Power cycle the printer and restart the Windows 7 PC
Press the Setup menu button (looks like a gear and wrench)
Select the Network Setup Menu
Scroll down and select Restore Defaults
Once the defaults are restored, scroll up in the Network Setup Menu and select Wireless Menu
Run the Wireless Setup Wizard again to reconnect the printer for a fresh IP address from DHCP
Next try to run the install package for the printer from HP's support website. To download this driver one can click here.
As well, there is a troubleshooting document for if the M276nw is not able to be found during a wireless installation. The document can be located by clicking here.
Let me know how it goes.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
I am in an internet cafe and my macbook pro can't find the wireless network available at the cafe. I have used this network before. I have restarted my machine several times too. help please
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
http://www.netspotapp.comNetspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting -
I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
Thanks,
IvetteYou would need to get the IP address of your printer then manually add a network print queue.
To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address. -
Can't find the wireless signal from my newly installed HP 3050 printer via I phon or I pad. Printer test page found no problems and states successful setup. Any ideal on the cause of the problem? Thanks.
Hello Sashalechat,
Welcome to the HP Forums.
I see that you are having an issue when attempting to connect to a wireless network.
Have you changed the router for a new one?
Make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Make sure that you are with in the 4'-20' range.
You can try the HP Print and Scan Doctor as well. Let me know if you see any error codes or messages.
Write me back when you have time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network
I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.
You will need to start over on the setup of the Time Capsule as follows:
Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule. The Ethernet cable must remain connected at all times.
Click the WiFi icon at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule
The example below shows an AirPort Express. You will see Time Capsule on your screen.
That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
Network Name..........Type in the exact name that the Netgear wireless is using
Base Station.............Type in a name that you want to call the Time Capsule. Use something short and simple. Mine is TC, for example
Password..................Type in the exact password that the Netgear wireless requires
Verify.........................Verify the Password again
Click Next
The setup wizard will configure everything for you automatically. When you see the message of Setup Complete, click Done.
That's it. Now you have one big "extended" network. Technically, this is called a "roaming" network. -
how can i find the capacity of my iphone 4s. whether it is 8G or 16G. I do not want to switch it on as it is not connected to any network at the moment
If you have the serial number of the phone, put it in here
To find the serial number without switching it on, read this article:
Find the serial number and other information for your iPhone, iPad, and iPod touch - Apple Support -
How can I find the all path available for a MPLS VPN in SP network
How can I find the all path available for a MPLS VPN in SP network between PE to PE and CE to CE?
Hi There
If we need to find all the available paths for a remote CE from a local PE it will depend upon whether its a RR or non-RR design. If the MP-iBGP deisgn is non-RR the below vrf specific command
sh ip bgp vpnv4 vrf "vrf_name" will show us the MP-iBGP RT for that particular VPN. It will show us the next hop. Checking the route for same in the Global RT will show us the path(s) available for same ( load-balancing considered) .Then we can do a trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback to get the physical Hops involved.
However if the design is RR-based there might be complications involved when the RR is in the forwarding path ie we have NHS being set to RR-MP-iBGP loopback and the trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback will get us the physical Hops involved.
If we have redundant RRs being used with NHS being set then the output of sh ip bgp vpnv4 vrf "vrf_name" will show us two different available paths for the remote CE destination but just one being used.
RR-based design with no NHS being used will always to cater to single path for the remote CE detsination.
So in any case the actual path used for the remote CE connectivity would be a single unless we are using load-balancing.
Hope this helps you a bit on your requirement
Thanks & Regards
Vaibhava Varma -
I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS. Is it possible to connect these directly without networking? Where can I find the printer driver?
It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed -
Network ip address keeps changing and for some reason I can't find the right settings. The diagnostics says to check with my network administrator, but idk whom that is being at a motel and all. I have made. New locations, & changed the ipv4 address. Help plz
Hmmm, is Network set to using DHCP?
Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select your access point and Remove your access point with the minus button.
Launch your keychain access in Utilities and delete your access point keychain entry.
Reboot
Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.
Instead of joining your network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed -
Where can I find the Java wireless tutorial?
hi all,
where can I find the Java wireless tutorial?
regards,
Elvishttp://www.onjava.com/pub/a/onjava/general/resources.html
Hows this?
Go down to near the bottom of the page to see Java Wireless stuff. -
Is it possible to disable the trackpad when a wireless or usb mouse is present? With Lion 10.7.2, I can not find the checkbox that was there before I installed Lion. Is the option gone on Lion?
There is no BIOS in OS X. There is only the EFI stored in ROM that is not user modifiable. OS X is probably checking Bay 0 for the boot drive since that is where it should be. It won't check the Tempo drive since it is treated like an external drive. I suggest you open Startup Disk preferences to see if the Tempo device is selected as the boot device. If it isn't, then select it. That will probably shave off a few seconds in the startup time.
-
My HP Photosmart C309a series printer can't find the wireless router 3 feet above it.
My HP Photosmart C309a series printer can't find the wireless router 3 feet above it. I ran the diagnostics and got "The wireless radio is not functioning" message. In what device is the wireless radio located? In the router? In the printer? I reset the router, did the #6 with the printer, but I am still unable to connect my wireless Macbook to the printer. My desktop Mac is connected to the printer with a cable and prints fine. Is my router messed up or my printer?
This question was solved.
View Solution.Just call HP, they can walk you through the options based on what is wrong with your printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Maybe you are looking for
-
Received X1 Carbon (2014/"New") model 20A70035US but missing MultiTouch!
I purchased a 20A70035US TopSeller ThinkPad X1 Carbon 2014 about a month ago. It just arrived today as supply was very tight on it. The unit looks great, but the MultiTouch display, which is documented in PSREF, and was also in the description of t
-
Problem in accessing JSP in a Clustered Session replicated environment
Hai All! When i tried to access Index.jsp in a clustered-Session inmemmory replicated environment it is throwing following exception,, What Might be the reason.. <Aug 1, 2001 12:11:19 PM GMT+05:30> <E
-
I am having problems getting Firfox to open. I have unistalled the 14. version and then installed the 15. version hoping that it would fix the problem. It didn't. I have even tried restarting the computer, which also did not solve the problem. I know
-
can we change this " if(!(session.isNew()))" to be jstl? thx
-
Using my Canon xl1 as a tape deck, I am trying to record from my timeline to DV tape but not picking up anything on the tape. Set up as follows: Firewire direct to computer (will log and capture from a test tape), external video on & all frames, set