Can't find the .ipa files on mac-mini!

Downloading ipad apps on mac-mini and can't find the .ipa files.  It looks like the app downloads but i only find the .tmp file afterward.  I need the .ipa to pull into configurator.  Anyone see this happen before?

Hello DLeimer,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue locating apps that you’ve downloaded from the iTunes Store on your Mac. To see the location of an app that you’ve downloaded, just select the file in iTunes and choose File > Get Info, as shown in this article:
Locate and organize your iTunes files - Apple Support
Ciao,
-Jason

Similar Messages

  • Where can I find the update for my mac mini, OS X v10.8?

    Hi. I'm tryin to connect my mac mini with my new HP printer.
    The softwere won't start because it says that I don't have de update the softwere needs, which is OS X v10.8 or later.
    I have OS X v10.7.5. I have found, on apple's site, OS X v10.8.1 and OS X v10.8.2.
    But my mac won't accept to run any of them. It just says that I need OS X v10.8 to run the other updates.
    Where can I find the update that I need? I can't find it here on apple's site.
    Please! I'we been sitting with thit sh*t for a couple of hous now.
    Thankful for your help asap
    xo Mickis, Stockholm Sweden.

    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)

  • Where can i find the backup files stored on my mac?

    where can i find the backup files stored on my mac?

    If you are asking about where iTunes stores backup files, see this knowledge base article for the info.
    If a general statement of backups, then then you have to look at each application to see where it saves according to its preferences window.

  • I backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

    i backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

    Don't you just love changes in interfaces?
    I found the answer to my question.
    When you attach a device (iPhone, iPad) to your Mac, in iTunes 12 in appears as a tiny icon in the second "row" of the iTunes display. Click the icon and the familiar iTunes display for the device appears. From there, on the Summary screen, you can see the dates of the backups of the device (iCloud and backup to the computer). You can also use the button to backup to the computer.

  • HT1338 I've shortcut file and i can't find the original file

    I'm a web developer and i use XAMPP .. I removed file from htdocs to trash and before i removed it , i took a shortcut to my desktop
    The shortcut doesn't open and i can't find the source file in trash
    Where can i find my source file :'(

    If you put the file in the Trash, the alias will not open it. It should tell you that it cannot open it because it is in the Trash. However, if it is no longer in the Trash, the alias will not be able to find it.
    If you deleted the trash, there is nothing left for the alias to point to.
    Did you try searching with Spotlight?
    If it is not in a user accessible place, you might need to search with the Finder.
    Type cmd-ctrl-F. Click the Add button to add criteria,
    You'll need to add a criteria to search for System Files. In the criteria (Kind) popup menu, select Other...
    Then, scroll down and find System Files. Select the checkbox so it stays in the menu and click ok.
    Set the second popup to Are Included.
    Select This Mac and type htdocs in the search field.

  • I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to..  When I've tried to download and install again

    I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to..  When I've tried to download and install again it says that the "Object Already Exists."  It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.

    cactisken
    You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
    Can you still use 12/12.1 on this same computer that will not let you use 13?
    What specific Window operating system are you using?
    Let us go through the usual drill...
    1. Does the problem exist with and without the antivirus and firewall(s) disabled?
    2. Are you using a pen and tablet device instead of a mouse?
    3. Did you install the program with antivirus and firewall(s) disabled?
    4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
    Local Disk C
    Program Files (x86)
    Common Files
    Adobe
    and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
    from SLCache to SLCacheOLD.
    5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
    computer as Premiere Elements 13?
    Let us start here and then decide what next.
    Thank you.
    ATR

  • My LV program can't find the iak file when the program is loaded from a different PC.

    Hello all,
    My LV vi with Fieldpoint I/O and it's IAK file are stored on the company network.  If I load and run the LV vi from the PC it was developed on, everything is fine.  If I load and run on a different PC (that has an identical install of LV), the LV vi can't find the IAK file (all of the I/O pointers to the file are grayed out.) 
    Also, if I make an EXE out of the vi on the machine that can find the IAK, it won't find it if it's run from the other machine.
    It is not related to whether one machine has different "rights", as they are identical.  It's not related to different installs of LV, as they are identical.   
    I have found that this is related to the network login name/password, and to the machine's network name.  If I login on the second machine and try to run the program, it won't find the IAK.  If I point it to the IAK it will run.  If I save it and log out, and then login as a different user with the same rights on the second machine, it won't find the IAK again, until I re-point it there when I re-run it.  This is true for both the vi and the EXE.
    This problem makes deploying the EXE difficult to different machines, as the first time it's run, the EXE has to be pointed to the IAK.  Pointing the EXE to the IAK is difficult as these installations have no keyboard or mouse.
    Does anyone have any ideas on how to fix this so the LV vi or it's EXE finds the IAK from no matter where it's loaded from?
    Thanks,
    Mike

    Laura,
    I figured I'd continue this thread because it's along he same line..
    I have two Fieldpoint systems. They are identical, except for one thing...one has an AI-110 in position 7...the other has nothing. Both have the same IP address, etc and I swap the ethernet cable between them when I want to select which one I use.  I use a dedicated ethernet card to the FP processor...and it's not the company net.
    There are two IAK files...one for the system with the AI-110, one for the system without the AI-110. The two IAKs are in different paths.
    Before I had the system and the IAK without the AI-110, I made an EXE of the code that woked with the AI-110, and it worked fine.
    But now if I run the EXE after I've used MAX and opened the IAK without the AI-110, the EXE won't read the AI-110!  I have to go back into MAX and open the IAK that has the AI-110 in it, close MAX and restart the EXE for the EXE to see the AI-110.  (Max is NOT SET to "Download Items on Save")
    I looks like the EXE is looking at MAX to get the IAK or a pointer to the IAK.
    Did I build my EXE incorrectly?  Shouldn't an EXE completely ignore MAX once it's made?
    Thanks,
    Mike

  • Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

    Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

    You can't do that.
    And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music.

  • Where can i find the cached file?

    where can i find the cached file?.
    while one video was getting cached . I could see the cached file in the cache directory that mozilla firefox uses which in my pc is .....Local Settings\Application Data\Mozilla\Firefox\Profiles\uujksq39.default\Cache. but later on when the full video was completely cached i couldnt find the file existing in that directory and i still have my session of that firefox opened and can watch the video from the firefox session.
    since the cached video is still there ,there most be some place where the firefox is storing that file. is it the case that when the file is big (greater than some threshold value) firefox stores in some other directory?

    You can do a search an the about:cache page.

  • IWeb works, but I can't find the domain file!!!!

    OK - this one has had me stumped for a few days now... I have iWeb (vs. 1.1.2 - from the '06 iLife). I need to find the domain file. It isn't in the home/library/app. support/iWeb folder. I didn't move it. I searched for it using command-F and using spotlight on my computer.
    iWeb is to reset and start from scratch if there isn't a domain file on your hard drive. So I know it's there somewhere (at least, I think it is?). My site is there. I can publish. I can make changes, however I can't find the domain file to make a back up of it. I don't think that I made it invisible - could I have somehow done that? And if so, is it possible to find it? I believ the program only works if the file is named "domain" so I don't think that I could have accidentally renamed it.
    Is there someone out there who can help me? I don't want to have to start from scratch and rebuild the websites.
    Thanks for your input!

    This is from Multisite's Technical Page:
    Technical Information
    While you don’t need to understand how data is stored to use Multisite for iWeb it can be helpful occasionally to understand what is going on behind the scenes. At a nuts and bolts level Multisite for iWeb stores all of its sites in your home folder’s Documents folder in a single package (which is really a fancy folder dressed up to look like a file) called “Multisite for iWeb Data.mfi.”
    You can open that package like this.
    Once you get your domain file straightened out I'd definitely get Varkgirl's Automator application to make frequent backups of that file. You can get it Varkgirl's iWeb Tips and Tricks site.

  • Where can i find the chassis file for import in MAX for drawing connection diagram before purchasing

    where can i find the chassis file for import in MAX for drawing connection diagram before purchasing
    chassis: NI PXIe-1078
    thx

    This board is for an obsolete product called Measure - an add-on for Excel. Please repost with details on exactly what you mean by 'chassis file'.

  • Where can I find the LOG file for bash/command history typed into Terminal?

    Where can I find the LOG file for bash/command history typed into Terminal?
    For 2 weeks ago I was searching for a log file on my server. Somehow I opend a file where I could see a list of all bash-commands I had ever entered into OSX Terminal.
    Now I need this file.. but cant find it.
    What is the official location for this LOG file?
    Thank you so much for helping.

    cat .bash_history

  • Where can I find the xsd file for SQL2012 .dtsx files?

    Where can I find the xsd file for SQL2012 .dtsx files?
    Tom G.

    I would start here. 
    http://msdn.microsoft.com/en-us/library/gg587789(v=sql.105).aspx The xsd is spread out over several of the appendices.
    Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

  • Where can I find the 16 character HFC Mac ID number?

    Where can I find the 16 character HFC Mac ID number?
    Thanks,

    There is no 16 character HFC MAC ID number on an Apple product, if that is what you might be asking about.

  • What is OASTOAST [Oracle Automated Stress/System Testing], where can I find the installable file. Is it same as OATS[Oracle application testing]

    Hi
    I am trying out the OAST[Oracle Automated Stress/System Testing].
    I could found out one user guide .Apart no other information.
    Where can I find the installable file for OAST. Its not mentioned in the user guide as wel.
    Is it same as OATS?
    Support team aked me to check out in CMS portal, but that didn't help.
    I heared its part of Oracle Certification Environment kit . Where can I get the installation files for it?
    What exactly Ineed to install for it...am kind of lost!!!!!!
    Anybody has any idea, please help me .
    Thanks
    Anirban
    email:[email protected]

    Never heard about OAST in 4 years and half at Oracle...
    Guess this is exactly OATS (aka ATS). SO go ahead with OATS dl and installation.
    JB

Maybe you are looking for