Can't find the jspdynpage in .par project

I have a project in NWDS with .par file for masthead.
In the dist folder I found the jsp files but where will I get the jspdynpages in this project.
I want to add the code to connect to R/3 in this dynpage for lightheaderiview.jsp
Please help.

Hi Anzar,
Kumar said:
> Check dist>PORTAL-INF>jsp
That is misleading of course, as you said that you found the JSPs by yourself.
The JSPDynPage implementation you won't find if you imported the PAR into NWDS, as the sources are not part of the PAR. And the compiled JAR parts of the PAR are not imported into NWDS automatically. So you would have to copy the JARs into the project manually, and within the JARs, you'll find the JSPDynPage implementation (if it is done via JSPDynPage). For changing something inside the implementation, you would have to decompile the classes you want to change, put them as sources into the project and delete the original compiled version within the copied JAR.
That way, you can change the implementation and create a new deployable PAR with your changes inside.
Hope it helps
Detlev

Similar Messages

  • PSE 9 Organizer Slide show can't find the slide show project files after moving from XP to Windows 7

    A bad computer virus forced us to move all our files and programs from XP to Windows 7.  The PSE Editor seems to be working properly, but the Organizer Slide Show can't find the project files.  The structure of each of the 15 slide shows (blank slides) is there and any text I had added, but the pictures and music are missing.  Our computer Tech is not too familiar with PSE and may not have the files in the right spot.  Evidently XP and Windows 7 are organized a little differently and use different names.  He still has all the PSE files from our old hard drive in a folder and probably just needs to know where to put them.         

    +Windows Vista has different file locations than Windows XP+
    This is the problem - the iTunes ITL file from XP is using XP paths, which don't exist in Vista. Here are some directions that have worked for others:
    - Copy your entire iTunes folder --- not just the iTunes Music folder but basically everything under "My Documents" - to external storage
    - Copy those files to your "Music" folder on your Vista system. The end result should be that you have "Documents\Music\iTunes" on Vista, where you had "My Documents\My Music\iTunes" on XP
    - Put a fresh install of iTunes on the Vista system.
    - When you run iTunes for the first time, hold down the Shift key. If it asks you to select a library file, pick the one you just transferred over.
    - The end result should be your library, including all ratings, play counts and play lists, sitting on the new system.

  • Front Row can't find the latest version of my iMovie project

    I need some help figuring out just where my iMovie project really is.
    I have been creating a project in order to learn how to manage all of the features of iMovie '09. I have revised many times and if I follow the path MacHD>Movies>iMovie Projects>first project and click to open, I see the most recent version.
    I have also shared using Media Browser and created an iDVD. Then I created a disc image of that and burned it using disc utility - just to see how all of that works. When I use DVD player to play it, I see the most recent version of my 'movie'.
    Next I tried to watch it using Front Row. When I open Front Row, then click through Movies to Movies Folder to iMovie Projects the computer tells me that there is no content. What I do have beneath the word Movies is the word Large. If I click on that, I get a much older version of the iMovie project that I thought had been discarded days ago.
    This is not a big deal. But I would like to know why Front Row can't find the most recent version of the project. I also would like to know why the old version is still there and reassurance that my latest version really has been saved and that it is 'safe'.

    I think that the movies that you see in Front Row are the ones that you shared to iTunes. However, if you click on the movies folder, you should see movies in your Media Browser. These are stored inside your RCProject file in the Movies/imovie Projects/<Project Name> container. If you right-click/Show Package Contents, you should see a Movies folder that has your movie.
    Also, there is a quirk in the Media Browser. If you have shared a movie to the Media Browser, and later change the movie, the Media Browser copy is deleted right then. You will see a warning message that says "This movie has already been shared. If you change it you will need to republish" (I am paraphrasing). So you have to re-share the movie for it to be in the Media Browser. However, copies you have shared to iTunes are not affected until you re-share.

  • When I try to open my project, where can I find the requested file 00000.mts2?

    When I try to open my project, I am asked where to find file 00000.mts2?
    I see almost all scenes in my project in color red  with the text 'media off-line'. But it is impossible to find this requested file 00000.mts2 on my computer. What can I do to solve this problem?
    Thank you for your answer.
    Hans

    Thank you. I have done what you told me. It was a long search, but at the end I was succesful. Again: thank you for your useful answer.
    Greetings,
    Hans
    Verstuurd vanaf mijn iPad
    Op 26 feb. 2015 om 00:29 heeft Peru Bob <[email protected]> het volgende geschreven:
    When I try to open my project, where can I find the requested file 00000.mts2?
    created by Peru Bob in Photoshop Elements - View the full discussion
    This is the Photoshop Elements forum.  Are you using Premiere Elements? If so, ask here:
    Premiere Elements
    By the way, if you moved your media files or they are on an external drive, you will have to relink them.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7230757#7230757 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7230757#7230757
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How can I change the overall duration of a project.  I did it once but I can't remember and can't find the answer.

    How can I change the overall duration of a project.  I did it once but I can't remember and can't find the answer.

    You could add more content.
    Or if the project contains stills, these can be lengthened. Double-click on a still photo to open the Clip Inspector. Adjust the duration by typing in the Duration box. Be aware though that if you have transitions either side of the still, you may get odd results with the duration. See this thread for more details:
    https://discussions.apple.com/thread/4269161?tstart=0
    John
    PS. I'm assuming you want to lengthen the project, not shorten it.
    Message was edited by: John Cogdell - added PS

  • How can we find the exit being implemented in a project.

    Hello,
    Very Good morning!
    How to find the impelementd exit for a given transaction
    How can we find the exit being implemented in a project and to find it's source code?
    Any Suggestions would be appreciated...
    Regards,
    Kittu

    Hi,
    Ways to find the exit triggering in the source code:
    1)first way
    1) If you hav that FM exit that was listed r used.
    2) go to se37 and type that FM
    3) In the source code of that FM double click the type of Message or
    exit result which has the Z<include>.
    4)IN order to disable the exit->
    utilities->system->sattus->program->attributes->package
    find this package
    5) in SMOD->Prject->F4help->giuve package name-give the found ones
    But here we cant see the implementation.
    2) second way
    1)goto SE37
    2)Give FM name
    3)/h(Debugging on)
    4) Display
    5) Break points->statements->(messages if used in exit)->execute
    Click on f5 until that Exit is triggered
    6) go and find out for each type of exit message shown ie til that exit functionality is
    actually triggered
    7)once u find that exit ur looking for->
    8)GOTO->SOURCECODE->give the include name that is found in debugging when exit is encountered
    9)copy this include name(ZX..)->keep a comment forthat exit in this include(ZX..) inorder not to process.
    10) se38->Zincludename(ZX..) and comment the code.
    11)save check n activate
    ->SE37->
    FM->name
    we can now view FM.
    3) third way
    1)FM->Name
    2)/H
    3)Break point at CALL CUSTOMER-FUNCTION statement
    4) It will stop at this exit.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • I have one folder with several projects all of which Aperure can not find the original.  I do not use referenced files.  I can't make any adjustments like cropping etc. What can I do to print any of these photos?

    I have one folder with several projects all of which Aperure can not find the original.  I do not use referenced files.  I can't make any adjustments like cropping etc. What can I do to adjust or print any of these photos?  IO have no ther projects with this problem.  My Aperture Library is automatically saved to two external drives.
    Dick Koos

    I have one folder with several projects all of which Aperure can not find the original.
    Have you checked inside your Aperture library, if the original files are still there?
    Try to find out, when the images in those projects have been originally imported, then open the Aperture library by ctrl-clicking it and using the command "Show package contents" from the pop-up menu. In the window that will open, select the folder "Masters" and browse the contents. You need to find the subfolder with the year you imported the images, then the folders with the month and the day.
    Are your original files still there?
    If yes, copy them to a folder on your desktop for safe-keeping, and then try, if repairing the permissions and the other Furst Aid tools will help Aperture to connect to these missing files again - see this link:  Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
    If the First Aid Tools don't help, then check, if Aperture has moved the missing images to a "recovered folder". If not, reimport the images, you saved to your Desktop and use the Lift&Stamp tool to transfer any adjustment and captions to your reimported images.

  • I saved an iMovie to DVD and now I can't find the original working files in iMovie Project library to make additional edits. What happened to the files? Thx!

    I saved an iMovie to DVD and now I can't find the original working files in iMovie Project library to make additional edits. What happened to the files? Thx!

    Did you do the moving of the image file in the Finder or do you have a reference library as asked by Larry? In either case moving the files is a recipe for disaster as you've found out. You must either move the files back to their original locations or try to get those photos back into iPhoto as follows:
    1 - Find the folder you moved the files into and COPY it to the Desktop.
    2 - in iPhoto delete the photos that you're having the problems with as you normally would even though you can't see see them. Also delete all the photos that are in the folder you moved the other files into.
    3 - drag the folder on the Desktop into iPhoto to import them as one event. If you get a duplicate warning I'd let it import the duplicate and use Duplicate Annihilator to find them so you can cull out the duplicate you don't want.
    Other than that you might have to start over from scratch as follows:
    Creating a new library while preserving the Events from the original library.
    1 - Move the existing library folder to the desktop
    2 - Open the library package like this.
    3 - Launch iPhoto and, when asked, select the option to create a new library.
    4 - Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
    OT

  • Where can I find the iweb project?

    I know it's supposes to be in Library/Application Support/iWeb, but I can't find the "/iweb" folder on my computer -- it's not in my user Library directory, and not in my hd Library directory (goes right from iLifeSlideshow to Microsoft in both).
    I just want to save one version of the site I'm making and then modify the site, and I know I did this in '08 -- but I can't find the file to move it to another folder.
    Dense, I'm sure.

    As I said, dense. Applecare helped me find it. I had moved it long ago, and was searching for it in spotlight instead of in finder!

  • Where is the jspdynpage in .par file for masthead

    I have a project in NWDS with .par file for masthead.
    In the dist folder I found the jsp files but where will I get the jspdynpages in this project.
    I want to add the code to connect to R/3 in this dynpage for lightheaderiview.jsp
    Please help.

    Hi Anzar,
    If you describe the scenario then probably you might get more helpful answers. You can write a custom module JSP which will use JCO adapters to fetch the data you need from the backend systems.
    Thanks,
    GLM

  • Help:Can not find the file in jar!

    Hello everyone:
    I build a project using Netbeans 5.0 and make a jar file with it...
    The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
    String dataFilePath = getClass().getResource(dataFile).getPath();
    //System.out.println("filepath:"+dataFilePath);
    InputStream input = new FileInputStream(dataFilePath);
    when I run the project with the main() function as an entry it works perfectly and output:
    filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
    But when I compressed the project with jar and run it , it will show:
    filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
    there is a (!) between search.jar and /com/cn/wxjt...
    I dont know why I generate a ! symbol in the file path... Is it cause the exception->
    java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
    If you have any idea, plz tell me.
    Thank you and best wishes to you !
    :)

    If the file you want to read is in your jar file, use
    getClass ().getResourceAsStream
    (relative_path_file_name)Hope that help,
    Jackhey jack i want to open the file as new File
    i m using this.getClass().getResource("resource/backend.xml");
    the resource is the directory inside the jar file.
    when i prints the url it shows:
    the jar file is in the WORK directory
    URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
    now when i creates new File using the url.getFile() method the file does not exist.
    although the same programs runs well when i uses the InputStream
    so plz tell me cant I create a new File from the above method????
    thanks in advance
    with regards
    neeraj

  • Nternal ERROR: Can not find the ACL containter for object ...

    We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
    Neither in metalink nor in the oracle forums I could find any hint about that error.
    Can anyone help??
    Thanks in advance, Maren
    Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
    Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
         at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
         at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
         at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
         at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
         at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
         at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
         at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
         at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
         at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
         at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

    Hi Maren
    Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
    Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
    I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
    fco.classname = 'CMPACLContainer' (Maren's)
    and the other
    fco.classname='CMPMap' (Oleg's).
    Was this intentional Maren on your behalf for your problem to be fixed?
    We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
    Thanks
    Edwin

  • Firefox can't find the file at (a location is specified) when either "Navigate previous" (and next) buttons are pressed in an HTML5 skin (but OK in IE/Chrome).

    I create HTML5 help projects from a package called MadCap Flare. It uses what they call an HTML5 'skin' that sets the style/layout of the page and also includes 'Navigate previous' and 'Navigate next' buttons. When viewing the help and pressing these navigate buttons in IE8 or Chrome 32 there is no problem, but in Firefox 27 I get the following: (typical error for pressing a button on any page)
    "File not found"
    "Firefox can't find the file at /C:/SVN/FlareEnglishOnLineHelp/Output/HTML5_Help_Modeller_Reference/4attrib/idh_jointinterface_element_meshes.htm?TocPath=Modeller Reference Manual|Chapter 5 : Model Attributes|Meshing|_____2."
    " Check the file name for capitalisation or other typing errors."
    " Check to see if the file was moved, renamed or deleted."
    - Because the files and buttons work in other browsers I'm wondering just what is going on here with Firefox>>>>

    I should correct that last entry and state that the | charactacters are generated automatically in the Toc-Path for each 'book' name in the online help, and are not something manually created, whereas the : characters have come from the TOC book topic names (which were manually entered names and are what we would ideally require). But, because 'previous' and 'next' topics within nested TOC books without colon (:) characters CAN be browsed successfully when just | characters are present in the Toc-Path, the limitation would appear to be solely due to the : characters.

  • The ProgressBar error - Can't find the __package__.js - Used to work fine

    Hello everybody
    Yesterday I created a page with some progress bar on it using the BluePrints components and it worked great. Today I come to work and nothing works. I used the HTTP monitor to study the requests and I got what you see below.
    Request 4:
    Request URI     /appcontext/dynamic/bpui_progressbar_handler/writeAjaxResponse.faces     Edit...
    Request 3:
    Request URI     /appcontext/static/META-INF/dojo/src/io/__package__.js     Edit...
    Request 2:
    Request URI     /appcontext/static/META-INF/dojo/src/__package__.js     Edit...
    Request 1:
    Request URI     /appcontext/static/META-INF/dojo/__package__.js     Edit...
    Which all had the same response status:
    HTTP exit status (as set by servlet)     404: Not Found     Edit...
    So in other words it just can't find the resources for some reason. I found a 'solution' here (which had to do with shale-remoting)http://forum.java.sun.com/thread.jspa?threadID=778815&messageID=4439351
    and I did it but it still gave this:
    Request URI     /appcontext/dynamic/bpui_progressbar_handler/writeAjaxResponse.faces     Edit...
    So does anyone have an idea what is going on here? Because I spent 8 hours on this with no result.
    It used to work great until yesterday. I do not remember chaning anything...
    Thanks in advance

    The first time I used the progressbar this was all I had in my web.xml
    <servlet-mapping>
              <servlet-name>Faces Servlet</servlet-name>
              <url-pattern>*.faces</url-pattern>
    </servlet-mapping>
    After it gave me all those problems with the __package__ thing so my web.xml ended up like this
    <servlet-mapping>
              <servlet-name>Faces Servlet</servlet-name>
              <url-pattern>/faces/*</url-pattern>
         </servlet-mapping>
    <servlet-mapping>
              <servlet-name>Faces Servlet</servlet-name>
              <url-pattern>*.faces</url-pattern>
    </servlet-mapping>
    And now I got the same ol' problem all of a sudden. I don't know what's wrong. I use the Visual Pack by the way and the project was first started with Creator 2.1. Is there anything I should know?
    I think I should better check out the source so as to get the whole picture of shale-remoting...
    Thanks guys...I hope we solve this thing together

  • Where can I find the deployed EJB files in Oracle 10g AS(904)

    Hello All,
    Where can I find the deployed ejb files, stubs and skels in the Oracle 10g (904)
    When I try to run my ejb application I m getting following exception:
    com.evermind.server.rmi.OrionRemoteException: Error (de-)serializing object: org.apache.log4j.Logger
    I am not sure what is causing this error. I am not using any logging in my EJB. But the logging framework is configured in the application server.
    Your input would be a great help to me
    Thank you

    Thanks Carty,
    I am not creating Connection from EJB. I have a POJO called DBManager that looks for the DB Connection and return that to either EJB or other POJO that requests for Connection.
    I am having a private method that get the connection from the DBManager because while writing UnitTest cases I can mockup getting Connection as my Unit test case will be a POJO again..
    I have a question here regarding making DBManager as Singleton class. In my current project, I have configured my database in the application server as getting the connection by lookup for datasource through JNDI. It internally maintains all logical connection and always have one physical connection. In such scenario how implementing singleton will be beneficial?
    Thank you for answering all my questions.

Maybe you are looking for