Can't find the power switch on the Zen V P

I can't find the power switch on my 2GB Zen V Plus. The manual says it's right below the lock switch but I don't see anything below it. Am I totally missing something?Thanks

Hi Cat,?A complaint I have about the Zen V plus is the small size of the buttons. They are a bit too close together and too small. It's a little difficult to do things like push the middle toggle?back and forth or?push it down without hitting the other buttons or toggling too much. My ipod is a lot easier to navigate. Phil

Similar Messages

  • HT201299 have updated my iphone 4s to the new iso7. Now i can't find how to switch on the cellular data. Please help.

    Hi
    I have updated my iphone 4s, with the new iso7. Now i can't find how to switch on the cellular data, please help!! Can't find the option in Settings

    Settings>cellular>cellular data

  • Where can i find a Power Adapter for the IdeaPad A2109?

    How are you?
    Looking for another Power adapter for the A2109....
    Havnt found the original in eBay...
    Is anyone knows where can i find the Power adapter?
    If not the original - is there any generic alternative that in good  quality?
    Any details? please feel free to provide!
    Thanks a lot!!!
    Solved!
    Go to Solution.

    b.t.w: charging is only by the USB port, am i right?
    One of these could suite?
    http://www.ebay.com/itm/New-Ariic-5V-2A-2000mA-AC-DC-USB-OUTPUT-Wall-Charger-for-Tablet-PC-Cell-Phon...
    http://www.ebay.com/itm/5V-DC-2000mA-USB-Wall-Home-Charger-Adapter-Supply-MP3-MP4-EU-Plug-High-Quali...
    http://www.ebay.com/itm/5V-1-5A-7-5W-EU-Wall-Mount-USB-Power-Adapter-Travel-Charger-Mobile-GPS-MP4-u...
    http://www.aliexpress.com/item/Ainol-years-novo7-Ares-charger-5v-1-5a-usb-original-adapter/693452820...
    http://www.aliexpress.com/item/For-UZONE-F6-advanced-WISE-Tablet-PC-5V-2A-USB-Plug-Power-Supply-Adap...
    Is it right that a lower ampere in the adapter = better battery life? 
    Thanks for all of your help!

  • I have an iMac G4 PowerPC with OS 10.5.? The OS10.5.8 update failed. Now get blue screen and error-can't find Intel Power Manager. What now??

    I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and must shut down. Now I get the blue screen. Startup with 'V' pressed shows multiple lines saying: error-can't find IntelCPU Power Manager. What now?? I  reset PRAM, I think.....?????

    I am concerned that you might have applied a system updated intended for an Intel iMac, while you have a PPC (non-Intel) iMac. Your PPC OS should not be looking for an "IntelCPU Power Manager."
    Have you tried booting from the 10.5 install DVD/CD and repairing the hard drive, plus repairing permissions?
    If you done the repairs mentioned above, and your problem still persists, you can also try doing a safe boot. (see http://support.apple.com/kb/HT1455 ) Then, if none of these things worked, if I were in your shoes (it's hard to diagnose these things without being there in person) I would first check that there is adequate disk space, then I would boot from the 10.5 DVD/CD install disk and reinstall the operating system. There is an option to do an archive and install preserving user files/settings, that would be the option you want, as it will save your files but install a new OS. Make sure you have a good backup of your files first. If you do not have one, use "target mode" to copy all your files before embarking on an new OS install. Assuming that you do succeed with this install, then use Software Update to get the right updates for your iMac.

  • Help! I've just updated my iPhone 5 to iOS 6.1.2 and I can't find the LTE switch only the 3G one.

    Help! I've just updated my iPhone 5 to iOS 6.1.2 and I can't find the LTE switch only the 3G one.
    Settings > General > Cellular *I know that the LTE switch should replace the 3G one 'cause my mom has it
    I updated it from iOS 6.0.2 I think so I skipped 6.1. Is this a possible reason (tho I doubt it)?
    is there any way to fix this?
    thank you in advance!

    Are you using an LTE enabled SIM? What carrier are you using?

  • Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

    where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
    if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
    http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
    so i could modify and use the driver

    Hello,
    It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
    Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
    Hope this helps.
    Scott B.
    Applications Engineer
    National Instruments

  • I am trying to find a power supply for the sony DRX-720 DVD/CD AND THE PRICE

    I am trying to find a power adapter for the sony DRX-720UL DVD/CD Rewritable Drive and the cost?

    All product support for CD/DVD drive, tape backup, or magneto-optical drive peripherals, including repair status, is available from Storage by Sony.
    NOTE: Contact and other information can be found on the Storage by Sony Web site at http://www.storagebysony.com/
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • HI .. I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet. used the power switch, when I tried to restart I got audible 'beeps' from it.

    HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
    This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
    It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
    When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
    Can anyone help please.

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • How do I search iCloud calendar appointments in the past on the PC or iPad or iPhone? I can't find how to search on the PC and others do not go into past

    How do I search iCloud appointments in the past on the PC or iPad or iPhone?
    I can't find how to search on the PC
    The iPad/iPhone iClould calendar search does not go into the past appointments

    So, you're not really asking how to search contacts notes on the device. You just came to tell us you switched to to the S4.
    Good luck!
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • This ipad hasb't been backed up in 6weeks. Backups happen when this iPad is plugged in , locked, and connected to wi-fi. i see this message in my ipad for last four days. i can't get out of it. i can't slide to power off on the sreen

    i have recieved the message on my iPad: This ipad hasb't been backed up in 6weeks. Backups happen when this iPad is plugged in , locked, and connected to wi-fi. i see this message in my ipad for last four days. i can't get out of it. i can't slide to power off on the sreen. the touch screen is locked. So i can't do anything eithere switch off or reset. kindly advice me.

    Try this support article >  iOS: Not responding or does not turn on

  • How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

    How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • My 27" Imac (A1312/EMC2390) keeps shutting down unexpectedly with no warning or "screen of death". I replaced the power supply, reset the SMC, and zapped the PRAM, but the problem continues. Can anyone help me?

    My 27" Imac (A1312/EMC2390) keeps shutting down unexpectedly with no warning or "screen of death". So far I reset the SMC, and zapped the PRAM. I even replaced the power supply but the problem continues. My error and system logs seem unhelpful too. Can anyone help me out?

    You can get a shutdown like that if the computer gets too hot. Make sure the air intakes on the bottom and the exhaust vent on the top are clean and are not blocked by something in your workspace like papers or the back of the computer being too close to part of the furniture. You need a good six inches (15cm) of clearance between the exhaust slot and other objects or surfaces.
    Anti-virus/internet security software, especially the "pay for" kinds, can increase operating temps. So can third-party backup software furnished with many "name-brand" external hard drives.
    Fan motors and/or temperature sensors can fail. If you have the original grey disks that shipped with your iMac, find the on that has Apple Hardware Test (AHT) and run it. If you have a failed heat sensor or fan motor, it will detect it with an error code containing "SNS" if it's a bad sensor or "MOT" if its a bad fan motor.
    AHT instructions here:
    http://support.apple.com/kb/HT1509
    Also see if your iMac 27 falls under theis Apple Repair Extension Program:
    iMac 1TB Seagate Hard Drive Replacement Program

  • I just can't find my ip cam on the network....?

    i just can't find my ip cam on the network....? Its plugged directly to time capsule whoyh ethernet cabel. but nothing to find on my mac...?? its a sony sensor 2mp ip cam an i have iMac and time capsule and some iPhone and a hp printer on this network everything is working fine but i justb cant find the cam... please HELP :-)

    becourse i can find the ip and mac adress from the cam on my Dell Laptop running on Windows vista
    Is this setup as you described.. the camera plugged into the TC? Both Mac and PC plugged or on wireless from the TC?
    What exactly is the IP of the camera?
    What is the IP of the TC?
    When you say you cannot find the CAM on the TC what exactly are you expecting?? Nothing at all will show up from the CAM on the TC when you have it plugged in by ethernet.
    How do you open the IP camera to access its controls.. on the PC or does it use a special PC only software??is it just via a browser?
    Have you tried opening it via browswer in the Mac?? if the layout is as you described and you can open it from the PC then the Mac will work exactly the same.. but cheap CAMs will not have Mac software. So this will only work from a browser.
    butt on the Dell laptop i cant install airport tool? or can i ?
    Of course you can install the windows version of the airport utility.. how does this help you.. I think you do not understand that the TC is a dumb hard disk in a router.. it offers nothing for your network.. it will never be able to see the Camera.. it is not smart enough to do anything but save files from a computer.

  • On my ipad mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo).  I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.

    On my iPad Mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo).  I've called support for both ATT and Apple and can't find a way to have the emails remain on the server. 
    My husband and I share an email address and if he misses a day checking email on his notebook, he doesn't receive the items that I have sent to Trash on my iPad Mini.
    Appreciate suggestions.
    [The curious thing is, if I "move" the deleted emails from Trash on my iPad Mini into the Inbox, I can go to my notebook, open my online email and they are back in my ATT/Yahoo Inbox.]

    Is your Yahoo account set up as POP3 or IMAP?

  • I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Help please!!

    I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Does anyone know how I can get to them? I did change my user name from 'user' while it was copying, could this have something to do with it?

    You don't want to do that by copying.
    Your best bet, by far, is to use Setup Assistant.  If your Mac is running Snow Leopard, see Using Setup Assistant on Snow Leopard or Leopard.
    If it came with Lion, it's a bit different: Using Setup Assistant on Lion

Maybe you are looking for