Can't find the Profile Option that controls the default display of DFF

I know there is a Profile option you can set to show a DFF by default when you are looking at CRM data (like the Organisation or Person).
This helps because you don't have to do a look up for the DFF's on the page. The user is automatically shown the DFF Codes on the page when it is loaded.
Can anyone tell me what Profile Option you set in Sys Admin to turn this on so it is displayed to the end user at all times?

The jsp file should have the DFF name. You will have to go through the jsp code and find out manually.
--Shiv

Similar Messages

Where can I find a docking station that supports the new 7th generation Nano?

Where can I find a docking station that supports the new 7th generation Nano?

I am not sure if there is a lightning docking station. But you can buy a lightning-to-30-pin adapter for typical docking station.

How can I get the frame option that diffuses the edges of a picture in pages 5.2

I recently updated to Pages 5.2 and have discovered that my favorite and most used framing option is no longer a choice. How can I get the frame option that allowed you to diffuse the edges to soften a picture edges on 5.2?

That is called the vignette, and yes Apple has removed it from Pages 5 along with 100 other features.
Pages '08/'09 should still be in your Applications/iWork folder so use that.
Be aware that Pages 5.2 is not only short of features it is also buggy and prone to leaving you with files that won't open.
Peter

My printer has trouble printing some coupons.I think it is because it automatically save the coupons but I can't find where to change that in the settings. Any suggestions?

MY printer won't print some coupons. I have downloaded the coupon printer but it still wont work. I keep getting a message that says to change my setting so that it won't save the items printed but I can't find that option in the settings anywhere. Suggestions???

where are you printing them from ? I think it should be under system preferences/printing
or under your printer's preferences control panel. If you want a quick solution, take a screenshot of the coupon and print that (command+shift+3) or for a better snapshot command+shift+4..
usually they'd be saved as jpeg's, or bmp's or some kind of pictures. try looking in user/yourname/documents or user/yourname/downloads
JB

HT2490 menu bar at top screen mountain lion is on pop up mode, I want it to stay visible but can't find where to do that on the system preferences

I hate the mountain lion upgrade and have had more problems with it than good things!
Its reset a lot of things on my computer, one of them being that the menu bar at the top with the apple logo on the right etc pops in and out of view whereas I would like it to stay visible but admittedly I'm no computer genius but I can't find where to change this setting. Any help???
And mountain lion with safari blocks plug-ins so I installed google chrome which works fine so I can watch you tube, why can't I watch you tube with safari??? totally annoying!!!! I have the most up to date adobe flash player also but it always tells me its not up to date. No idea how to fix this but I hope apple fixes it soon. Really disappointed with the "upgrade"
I would appreciate anyone that could lead me in the right direction so I can function normally again.

If you can't see the menu bar using Safari, it sounds like you're using full screen mode.
Try Control + Command + F to reveal or hide the menu bar.
For the blocked plugin issue try here > safari 6.0 flash problem (blocked plug...: Apple Support Communities

Not able to get the profile option value

Hi,
Not able to get the profile option value after i changed the new value in the application.
I am using fnd_global.apps_initialize to initialize the apps from PLSQL code to get the updated profile option value. But fnd_profile.value is not getting fetched the updated value. Still it is fetching the old one. I mean it is stored in database cache. Please any one let me know how to get the new value every time after i changed the value.
Thanks

What is the application release?
Is this a custom or seeded profile option?
Can you confirm that the value got changed from the application (query the profile option and verify the value)?
Can you reproduce the issue if you use an API to update this profile option as per (How to Change Profile Option Value Without Forms? [ID 943710.1])?
Thanks,
Hussein

Has anyone ever successfully done a cont double buffer acq from multiple SCXI channels AND a spare AI of the MIO that controls the SCXI chassis at the same time?

I am trying do a sanity check before I order some hardware.
What I want to do is acquire from multiple channels in a SCXI chasis and as part of the same acquisition, also read from one of the "un-used" AI channels of the MIO card.
My concern is this:
All of the channels of the SCXI chassis get multiplexed down into a single channel of the MIO card that controls the SCXI chassis. This means that channel 0 has to do multiple A/D conversions to get a reading from all of the configured SCXI channels.
Meanwhile, the other AI channel of the MIO only has to do one to get it's reading. It seems that the on-boar
d clock of the MIO would have to run at two rates to be able to read all of my SCXI channels AND the other AI channel.
What I want to do:
I want to just configure a vitual channel for all of my SCXI channels AND one more for one "odd-ball" signal that is incompatable with all of the SCXI modules.
Then I just want to list all of my virtual channels when I configure and start my continuous double buffered acquisition.
I have successfully done all SCXI channels before, but I have never tried to use one of the un-used AI on the MIO at the same time. I have used the spare DIO lines previously, but that will not work in this app.
So...
If you have done this and it worked, I would greatly appreciate hearing about any special techniques that were used, etc.
Thank you for reading this question,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Jeremy answered here
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000007C40000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Has anyone ever successfully done a cont double buffer acq from multiple SCXI channels AND a spare AI of the MIO that controls the SCXI chassis at the same time?

I am trying do a sanity check before I order some hardware.
What I want to do is acquire from multiple channels in a SCXI chasis and as part of the same acquisition, also read from one of the "un-used" AI channels of the MIO card.
My concern is this:
All of the channels of the SCXI chassis get multiplexed down into a single channel of the MIO card that controls the SCXI chassis. This means that channel 0 has to do multiple A/D conversions to get a reading from all of the configured SCXI channels.
Meanwhile, the other AI channel of the MIO only has to do one to get it's reading. It seems that the on-boar
d clock of the MIO would have to run at two rates to be able to read all of my SCXI channels AND the other AI channel.
What I want to do:
I want to just configure a vitual channel for all of my SCXI channels AND one more for one "odd-ball" signal that is incompatable with all of the SCXI modules.
Then I just want to list all of my virtual channels when I configure and start my continuous double buffered acquisition.
I have successfully done all SCXI channels before, but I have never tried to use one of the un-used AI on the MIO at the same time. I have used the spare DIO lines previously, but that will not work in this app.
So...
If you have done this and it worked, I would greatly appreciate hearing about any special techniques that were used, etc.
Thank you for reading this question,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Jeremy answered here
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000007C40000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

In the new iOS-7 Safari, has the "reader" function been changed to eliminate the option to modify font size (and hence to modify the number of words per line), or is it just that I can't find how to do that?

In the new iOS-7 Safari, has the "reader" function been changed to eliminate the option to modify font size (and hence to modify the number of words per line), or is it just that I can't find how to do that?

iOS 7
Seperate text size modification is no longer available in Safari Reafer.
Use Settings.
Settings >General > Text Size

I'm trying to download an app on my iPhone, however I'm being told that the terms and conditions have changed and i must look at them before i can download. I've gone through the terms and conditions multiple times and i can't find an 'accept' option?

I'm trying to download an app on my iPhone, however I'm being told that the terms and conditions have changed and i must look at them before i can download. I've gone through the terms and conditions multiple times and i can't find an 'accept' option?

Hello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G.

How can we set the profile options to increase OPP response Time

Hi All,
While running the concurrent program to merge the data template and rtf template we got the following message in the log file.
Executing request completion options... ------------- 1) PUBLISH ------------- Beginning post-processing of request 9079946 on node G2C-IDEV-02 at 21-SEP-2007 02:04:49. Post-processing of request 9079946 failed at 21-SEP-2007 02:19:53 with the error message: The Output Post-processor is running but has not picked up this request. No further attempts will be made to post-process this request, and the request will be marked with Warning status. Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary. --------------------------------------
Thanks in advance

Hi ,
There are 2 new profiles options that can be used to control the timeouts. Depending on the error message, one of the following solutions needs to be implemented.
Profile Option : Concurrent:OPP Response Timeout
Internal Name : CONC_PP_RESPONSE_TIMEOUT
Description : Specifies the amount of time a manager waits for OPP to respond to its request for post processing.
Profile Option : Concurrent:OPP Process Timeout
Internal Name : CONC_PP_PROCESS_TIMEOUT
Description : Specifies the amount of time the manager waits for the OPP to actually process the request.
Note: The profile options are available as of $FND_TOP/patch/115/sql/AFCPOPRB.pls 115.3 and are included in Patch 4125550 11.5.10 CU2 for ATG Product family.
Solution A
Option 1: Increase the value (in seconds) for the profile option 'Concurrent:OPP Response Timeout'.
Option 2: Increase the number of processes or threads (or both) of the OPP via Oracle Applications Manager (see Note 291792.1 for the detailed instructions)
Solution B
Increase the value (in seconds) for the profile option 'Concurrent:OPP Process Timeout'.
Workaround
The timeouts can also be altered directly in the package AFCPOPRB.pls :
-- Default timeout values for waiting on a response to a request (seconds)
TIMEOUT1 constant number := 120;
TIMEOUT2 constant number := 300;
TIMEOUT1 and TIMEOUT2 corresponds to respectively OPP Response Timeout (solution A) and OPP Process Timeout (solution B).
Cheers
Ranjit.

My profile in camera calibration in lightroom 5 show only embedded. How to set profile to landscape or portrait. I can't find any other option, only embedded.

My profile in camera calibration in lightroom 5 showing only embedded". How to set profile to landscape or portrait. I can't find any other option, only embedded. How to install all profile's?

The profiles are there, but they only display and are only available for raw images. The image that you are highlighting is either a JPEG or some other non--raw file format. The only profile available for non-raw images is the embedded profile.

I am unable to start Firefox. Getting message that it's already running. Can't find my profile using "%APPDATA%\Mozilla\Firefox\Profiles|". What do I need to do

I am unable to start Firefox. Getting message that it's already running. Can't find my profile using "%APPDATA%\Mozilla\Firefox\Profiles|". Rebooting my computer didn't help. Since I experienced that problem I also noticed that all my bookmarks which I had copied into the Windows Internet Explorer have also disappeared. I am using Firefox as my primary search engine and usually don't use Internet Explorer. I am running Windows 7 on my machine.

Try this add on [https://addons.mozilla.org/en-US/firefox/addon/open-profile-folder/ Open Profile Folder]

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

You likely have a 2G iPod and those can go higher than 4.2.1
A 3G can go to 5.1.1
IA 4G, with cameras can go to iOS 6.1.6.
The 5G, also with cameras can go to iOS 8
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
Identifying iPod models

I would like make 3D text and panel that controls the bevel is missing. How can I fix this?

I was making 3D text, and when I went to create a new project, I had written out my text and made it 3D but the panel that controls the bevel wasn't available anymore. How can I make this panel visible?

Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
Click the "Restore Default Set" button.
* http://kb.mozillazine.org/Toolbar_customization

Can't find the Profile Option that controls the default display of DFF

Similar Messages

Maybe you are looking for