Can t find the question mark on the keyboard

hi
I ve just installed tiger 2 days ago and I can t type the question mark any more.. it gives me either this ^ (with shift) or § (with alt)..
any ideas..

gallinette:
Boot from the Tiger install disk.
Go to Utilities menu.
Launch Disk Utility.
Select your HDD (manufacturer ID) in sidebar.
Select First Aid tab in main panel.
Click or Repair disk button.
If DU reports disk needs no repairs, quit DU.
If DU reports errors, click Repair again and again until DU reports disk repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
In this case, because of your keys being out of order, I believe Disk Warrior will do a better job.
While booted from internal HDD go to Home > Applications > Utilities > Disk Utility.
Launch Disk Utility.
Select your HDD (manufacturer ID) in sidebar.
Select First Aid tab in main panel.
Click or Repair Disk Permissiions button.
Quit DU.
Please don't hesitate to post back with further questions or comments, or to report on how procedure worked for you.
Good luck.
cornelius
Message was edited by: cornelius

Similar Messages

  • HT2101 I can't find the keyboard by using iMessage, but I can by using email or whatsapp? How I reset the keyboard on iMessage?

    I can't find the keyboard by using iMessage, but I can by using email or whatsapp? How I reset the keyboard on iMessage?

    Did you tap in the box at the bottom of iMessage?
    If you did and no keyboard is showing: Do a reset
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    If that didn't helped, double tap Home button, delete the Message app and reset again.

  • Junk mail filter in yosemite doesn't work. i can't find the 'mark as junk' selection or 'remove from previous recipients' which would help to filter out spam.

    junk mail filter in yosemite doesn't work. from the flags, i can't find the 'mark as junk' selection. Formerly clicking on the email address in question would allow one to 'remove from previous recipients' which would help to filter out spam. I've adjusted all the settings under mail preferences, but that is not helping.

    Hello Diane162,
    Welcome to the Apple Support Communities!
    I understand that you would like to be able to filter some of the junk mail that you are receiving in Mail. The attached article has a lot of great information on junk mail filtering, including how to mark as junk and adjust the junk filter.
    Mail (Yosemite): Reduce junk mail in your inbox
    Cheers,
    Joe

  • Hi there, i'm trying to change a PDF document written in arabic to Word document, the problem is (( i can't find the arabic language in adobe )) the question is how to install the arabic language

    hi there, i'm trying to change a PDF document written in arabic to Word document, the problem is (( i can't find the arabic language in adobe )) the question is how to install the arabic language

    <moved from Downloading, Installing, Setting Up to Creating, Editing & Exporting PDFs>

  • Where can i find the answers to my safety questions?

    I have earlier answered my safety questions, where can i find the answers?

    See Kappy's previous discussion.
    HT5312 How to recover security...: Apple Support Communities

  • I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put ab

    I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs.  What am I missing?
    Thanks,
    upsjdris

    Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
    You can set Aperture to import raw, jpeg, or raw&jpeg.
    If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
    Photos > Use Raw as original.
    Regards
    Léonie

  • I need to get raw plugin for Canon 5D Mark iii for CS6  the adobe website has changed and I can not find the download.. it keeps looping me back to the product download

    I need to get raw plugin for Canon 5D Mark iii for CS6  the adobe website has changed and I can not find the download.. it keeps looping me back to the product download page without the raw

    Which operating system are you using?
    Have you tried Help>Updates from within photoshop cs6 to get either camera raw 8.3 or 8.7.1, which should enable photoshop cs6 to open the canon 5D Mark III files.
    (version of camera raw depends on your operating system)
    If that doesn't work try one of the following camera raw plugin installers:
    Camera raw 8.7.1 plugin
    https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
    If you have windows xp or vista or mac os x snow leopard (10.6.8), then you'll have to use the camera raw 8.3 plugin installer:
    https://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

  • I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

    I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

    So it sounds like you are trying to burn a DVD with photos on it so the photos can be either transferred to or displayed on a Windows PC, is that correct?
    For the purposes of this I am going to assume you are using iPhoto '11.
    Gather the photos you want to burn to DVD in one album in iPhoto. This is not absolutely necessary but it sure makes things easier for me.
    Select that album, then go to the File menu and select Export...
    In the dialog that shows up, select the File Export tab. Select the setting you want to use for export. Click the Export button.
    Another dialog will show up. Set the location to Desktop and click the New Folder button. Name the folder something nice and descriptive and click the Create button.
    Click the OK button. Quit iPhoto as the rest of this work will be done in the Finder.
    You will now have a folder on your desktop with that nice descriptive name. Find it and select it. Go to the File menu and from it select Burn "Descriptive folder name" to Disc...
    Insert a blank DVD when prompted.
    Let the finder complete the work and eject the disc afterwards.
    That's it. Best of luck.

  • HT1918 Where can I find the answers to my security questions?

    Where can I find the answers to my security questions?

    And if you forgot those answers, can you find them somewhere else??

  • HT3951 I just can't find the question...  I need to fix the app that I downloaded & it's not completing the download even on Wi-Fi???  Please help!!,!!,!,!,!!,!,!!

    I just can't find the question...  I need to fix the apps that I downloaded &amp; it's not completing the download even on Wi-Fi???  Please help!!!!!!!!!

    iOS: About File Sharing

  • HT1491 I can't remember my security questions.  How can I find the answers in order to purchase my first app?

    I can't remember my security questions.  How can I find the answers in order to purchase my first app?

    Go to: expresslane.apple.com
    Under product categories choose iTunes
    Then iTunes store
    Then account management
    Press continue.
    Now choose iTunes store security and answer the bullet questions and click continue.
    Sign in with your appleid and press continue
    Under contact options fill out the information and advise iTunes that you would like your security/challenge questions reset. Click send.
    iTunes will respond to you within 24 hours by email.

  • Where can I find the forum premiere elements? and how to find my own questions asked return?

    waar vind ik het premiere elements forum en hoe vind ik mijn eigen gestelde vragen terug?
    where can I find the forum premiere elements? and how to find my own questions asked return?

    arkitsa wrote:
    thank you 99jon, but still difficult to find your own questions back.
    Click on this:
    then this:
    and finally this:
    And your posts will be listed.

  • When I try to open my project, where can I find the requested file 00000.mts2?

    When I try to open my project, I am asked where to find file 00000.mts2?
    I see almost all scenes in my project in color red  with the text 'media off-line'. But it is impossible to find this requested file 00000.mts2 on my computer. What can I do to solve this problem?
    Thank you for your answer.
    Hans

    Thank you. I have done what you told me. It was a long search, but at the end I was succesful. Again: thank you for your useful answer.
    Greetings,
    Hans
    Verstuurd vanaf mijn iPad
    Op 26 feb. 2015 om 00:29 heeft Peru Bob <[email protected]> het volgende geschreven:
    When I try to open my project, where can I find the requested file 00000.mts2?
    created by Peru Bob in Photoshop Elements - View the full discussion
    This is the Photoshop Elements forum.  Are you using Premiere Elements? If so, ask here:
    Premiere Elements
    By the way, if you moved your media files or they are on an external drive, you will have to relink them.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7230757#7230757 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7230757#7230757
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Can't find the driver of laserjet p4015dn for windows XP

    I can't find the driver of laserjet p4015dn for windows XP. Where can I download it?

    Have you gane to the Windows Update website to see if there was a Synaptics Touch Pad Driver made available by  Microsoft? Although I did my 8.1 upgrade a while back, I seem to recall such a update was available. 
    Otherwise if my memory is in error, you can always go right to the Synaptic website and download and install their latest driver.  Here is the link.......
    http://www.synaptics.com/resources/drivers
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • I can't find the safari application anywhere in my preferences. how do i access safari and put it on my dock?

    our computer has two profiles. one profile has safari and we are able to access the internet. on the other profile, the safari application would display a question mark on it when i tried to open the application. i removed the safari application from the dock. now, i can't find the safari application anywhere to be able to use it and put it on my dock.

    It sounds like Safari has somehow been installed in a user / Applications folder instead of the Macintosh HD / Applications folder where it should be.
    Log in as the user that can open Safari, navigate to home / Applications and drag the Safari icon out of there to the Macintosh HD / Applications folder. Then drag it to the Dock and drop it when the other icons move aside for it.
    You should now be able to access Safari from all accounts.

  • Can't find the eFax app on my HP Officejet Pro 8500A

    Can't find the eFax app on my HP Deskjet Pro 8500A. At the eFax Webside only the eFax Plus and Pro services are available.
    Does the free eFax service not exisst anymore?
    Cheers
    Michael
    This question was solved.
    View Solution.

    Hi Michael,
    The eFax service is not available for any printer model.
    The only models currently support the eFax App are HP Photosmart C510, HP ENVY 110 and HP Photosmart 7510.
    Additionally, the eFax App was never provided for any All-in-One containing a physical analog fax card.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • Unicode error free MODIFY statement

    HI All, I have midify statement in a loop like this. loop at itab into wa_itab. modify itab from wa_itab index tabx. endloop.   I am working in ECC 6.0. It is showing unicode error at modify statement. Please suggest me the correct statemnt.ANy exten

  • Two systems on one databses

    Hi, we are currently running our QA and DEV systems one one host and one sql server 2000.the systems version is 4.6c.we are going to upgrade our systems to ecc6.I would like to know if this configuration (two systems on one host and one DB - <u>not m

  • BW Statistics  - Is it transportable ?

    Hello Gurus, This is a question on BW Statistics. I have made the necessary settings to switch on BW Statistics. My question is, Are these settings Transportable or do they need to be maintained in each landscape. Thanks in advance

  • SubVI Waiting to Run

    I have written a data acquisition program with LV 6. I have written it so that one part of the program gets data from our NI PCI-MIO-16 type card, and outputs the data to a global array at a frequency of 100 Hz. Other parts of the program then read t

  • Wireless connection problem Photoshop C4795 and Mac OSX 10.9.1

    Help Please!