Can't find the standard infoobject/infocube in BW system
I have studied BI for only 2 months. When I try to extract data from R/3 system, I find that I can't find the standard Infoobject/infocube such as 0plant, 0purchaseorganize both in RSA5 and RSA6. Our basis team advice me to install a patch for my SAP gui. So could anybody tell me which patch should I install
Best regards
Edited by: Yang12 on Sep 16, 2009 4:04 PM
Hi expert,
I also has met this kind of issue , i can't found out infoobject( 0CO_AREA,0BUS_AREA,0RESP_PERS...) in BW(ECC6),
And i have perform the steps base on your instruction,but still can't found 0PLANT(i have not install datasource),
Please help me;
By the way,
Do we need install datasource at frist,then go to RSA1-> click on BI Contenct button on left -> click ........
If yes,how does i know which datasource need be install;
for installing 0PLANT - go to RSA1-> click on BI Contenct button on left -> click on object types -> Expand infoobject -> click on select objecst and clifk on find and type 0PLANT and click on transfer selections
Edited by: 350761380 on Sep 16, 2009 4:50 PM
Similar Messages
-
Where can we find the standard program for scripts and smartform for vl02
where can we find the standard program for scripts and smartform for vl02
regard,
anilIf it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers -
How do I correct the error: Adobe Acrobat 9 distiller can not find its standard ICC profiles. Please reinstall adobe acrobat to correct this problem?
I have tried all the suggestion in the forums. But I keep getting the error. I reinstalled AA9 Pro and downloaded the updates. But I keep getting the error.
I recently upgraded to Windows 7.You have permissions issues on the respective folders, e.g. Windows\System32\Color and so on. Fix them and allow all apps to access the contents.
Mylenium -
Where can I find the download link for Acrobat Standard v. 8.1 ?
where can I find the download link for Acrobat Standard v. 8.1 ?
ThanksSee if anything in here helps: https://helpx.adobe.com/creative-suite/kb/find-download-link.html
-
I have reinstalled my computer and now I can not find the Acrobat x Standard software to download
I have reinstalled my computer and I can not find the Acrobat X standard software to download so that I can reinstall. Only the pro version seems to be available via your websit
Hi 123mandyc,
An email has been sent to you via Adobe Send Now to download Acrobat X Standard. Please check. -
Hi, I purchased Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). I have never installed it anywhere else. What is the best way for me to install it?
Hi lintonm86921521,
I can understand your concern & will guide you through this.
I am so sorry to inform you that Acrobat XI Standard is not available on Mac, you can only use it on your Windows computer.
You can also refer to the system requirements at : System requirements | Acrobat family of products—older versions (XI, X, 9)
In case if you have any further query please let us know, we will be happy to help you.
Regards,
Aadesh -
moving adobe 9 standard from 1 machine to another. How can I find the activation code on the old machine to activate on new machine?
You didn't really clarify much, just repeated the same question. First of all, Adobe is a company with many products.
Are you talking about Adobe Acrobat? If so you need to deactivate it on the old machine and then use enter the serial-number (as described) when installing it on the new machine. It will then activate itself automatically over the internet. Just keep in mind that Acrobat 9 is not compatible with Windows 8 and to make it compatible with Windows 7 you have to update it to at least version 9.2 after the installation. -
How to find the Datasource,ODS,InfoCube by a field of a R3 table
Hey Folks!
I'm trying to find the Datasource,ODS,InfoCube by a field of a R3 table.
It means I want to get the Datasource,ODS,InfoCube which contain the field I wanted.
I did the following steps, Please correct me if I'm wrong.
1. I use table RSOSFIELDMAP to get the related Datasource and infoobject by field I wanted.
2. Then I use the infoobject of filed which I get from step1 to get the related ODS in the table RSDODSOIOBJ.
3. I also use the infoobject filed which I get from step1 to get the related InfoCube in the table RSDCUBEIOBJ.
But I have concern about the way I search the ODS and InfoCube.
Could somebody help me on it?
Thanks.Hi Ihdai,
1) In step1 what you are doing is good...that table gives the mapping of the source fields in DataSources.
2) One if you know the InfoObject Name....Open the InfoObject definition...
and click on the "Multiple Arrow" button which gives "Where used list"...
That is a better way to get the list..
3) You can use the tables also.
Regards, BB -
Everytime I click a link that's not in the actual browser window, could be from a word doc, pdf-file or just plain info link in windows gadgets, I get an error:
[Clicked link]
Can't find the program
I have:
Windows 7 64-bit
Firefox 4 RC 1
Firefox is standard browser and installed at default location.
please help, it's getting really annoying!!This is what I get when opening a link from Outlook 2010.
Windows 7 64bit
Firefox 4 RC
Firefox 4 is set as the default browser
Links won't open in FF4 from any external programs (tweetdeck, outlook, word, etc.) -
Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?
You can't do that.
And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music. -
I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Where can I find the file where the static mapping allocations of the DHCP server are stored?
In our company we are using DHCP to assign static ip addresses to our clients.
Now we are forced to change the ip address range. To prevent changing each allocation
of mac-address to ip-address manually with the admin tool i would like to change the allocation
in the file where the allocations are saved. The reason ist that i just have to use copy & paste for all
the allocations.
So how is the file named and where can I find the file where
the static mapping allocations of the DHCP server are stored? Is it just an ASCII file?
Must i note anything when i change the file manually?From man bootpd:
BOOTP/DHCP STATIC BINDINGS
Static IP address to ethernet address bindings are stored in the /etc/bootptab file and in Open Directory. Bindings specified in the /etc/bootptab file take precedence over those in Open Directory.
See bootptab(5) for more information about the /etc/bootptab file.
For Open Directory, bootpd looks at the /Computers records for the following properties:
/etc/bootptab is a standard text file, while the records in Open Directory can be manipulated either through the command line, or via Workgroup Manager. -
How can we find the list of user exits for a transaction
hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadishhi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen -
Why can not catch the standard BACK event in ALV's USER_COMMAND event,
Hi expert, why i can not catch the standard BACK event in ALV's USER_COMMAND event,
Code:
DATA G_CON_UC_FORM TYPE SLIS_FORMNAME VALUE 'F_USER_COMMAND',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = G_CON_FORM
I_CALLBACK_USER_COMMAND = G_CON_UC_FORM
IT_FIELDCAT = G_TAB_FIELDCAT
IT_SORT = G_TAB_SORT_INF
I_SAVE = G_CON_U
*<<<Liang
IT_EVENTS = G_TAB_ALV_EVENTS
*<<<Liang
TABLES
T_OUTTAB = G_TAB_OUTPUT_DATA
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
*& Form F_USER_COMMAND
ALV USER COMMAND processing
FORM F_USER_COMMAND .
IF SY-UCOMM = '&FO3'.
LEAVE TO SCREEN 0.
ENDIF.
ENDFORM. " F_USER_COMMAND
When I set breakpoint on this subrouting ,and try to click stardard BACK or CANCEL button, the callback form do not run, but if double click one of line of alv report, the callback form works well,
so why??hi
good
check this report and change your code accordingly.
THESE LINES ARE FOR THE MAIN PROGRAM ***
SAP V40B ***
REPORT Z_PICK_LIST .
TABLES: RESB.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS: S_WERKS FOR RESB-WERKS," Plant
S_AUFNR FOR RESB-AUFNR," Order number
S_BDTER FOR RESB-BDTER." Req. date
SELECTION-SCREEN END OF BLOCK BL1.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT DEFAULT '/STANDARD'.
DATA: BEGIN OF OUT OCCURS 10,
AUFNR LIKE RESB-AUFNR, " Order number
MATNR LIKE RESB-MATNR, " Material
BDMNG LIKE RESB-BDMNG, " Requirements in UM
MEINS LIKE RESB-MEINS, " Unit of Measure (UM)
ERFMG LIKE RESB-ERFMG, " Requirements in UE
ERFME LIKE RESB-ERFME, " Unit of Entry (UE)
MAKTX LIKE MAKT-MAKTX, " Mat. description
END OF OUT.
INCLUDE Z_ALV_VARIABLES.
INITIALIZATION.
REPNAME = SY-REPID.
PERFORM INITIALIZE_FIELDCAT USING FIELDTAB[].
PERFORM BUILD_EVENTTAB USING EVENTS[].
PERFORM BUILD_COMMENT USING HEADING[].
PERFORM INITIALIZE_VARIANT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
AT SELECTION-SCREEN.
PERFORM PAI_OF_SELECTION_SCREEN.
START-OF-SELECTION.
PERFORM GET_ORDERS.
PERFORM GET_MATERIAL_DESCRIPTION.
END-OF-SELECTION.
PERFORM BUILD_LAYOUT USING LAYOUT.
PERFORM BUILD_PRINT USING PRINTS.
PERFORM WRITE_USING_ALV.
FORM INITIALIZE_FIELDCAT *
--> P_TAB *
FORM INITIALIZE_FIELDCAT USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT.
ENDFORM. " INITIALIZE_FIELDCAT
*& Form GET_ORDERS
text
FORM GET_ORDERS.
SELECT AUFNR MATNR BDMNG MEINS ERFMG ERFME
FROM RESB
APPENDING TABLE OUT
WHERE XLOEK EQ SPACE " deletion indicator
AND XWAOK EQ 'X' " goods movement indicator
AND WERKS IN S_WERKS " plant
AND BDTER IN S_BDTER " req. date
AND AUFNR IN S_AUFNR. " pr. order
ENDFORM. " GET_ORDERS
*& Form GET_MATERIAL_DESCRIPTION
text
FORM GET_MATERIAL_DESCRIPTION.
SORT OUT BY MATNR.
LOOP AT OUT.
SELECT SINGLE MAKTX
INTO OUT-MAKTX
FROM MAKT
WHERE MATNR EQ OUT-MATNR
AND SPRAS EQ 'EN'.
MODIFY OUT.
ENDLOOP.
SORT OUT BY AUFNR MATNR.
ENDFORM. " GET_MATERIAL_DESCRIPTION
FORM TOP_OF_PAGE *
FORM TOP_OF_PAGE.
DATA: L_POS TYPE P.
first line
WRITE:/ TEXT-001. " Plant:
IF S_WERKS-HIGH NE SPACE.
WRITE: S_WERKS-LOW, TEXT-TO1, S_WERKS-HIGH.
ELSEIF S_WERKS-LOW NE SPACE.
LOOP AT S_WERKS.
WRITE: S_WERKS-LOW.
ENDLOOP.
ELSEIF S_WERKS-LOW EQ SPACE.
WRITE: TEXT-ALL.
ENDIF.
L_POS = ( SY-LINSZ DIV 2 ) - ( STRLEN( TEXT-TIT ) DIV 2 ).
POSITION L_POS. WRITE: TEXT-TIT.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-011, SY-UNAME RIGHT-JUSTIFIED. " User:
second line
WRITE:/ TEXT-002. " Order:
IF S_AUFNR-HIGH NE SPACE.
WRITE: S_AUFNR-LOW, TEXT-TO1, S_AUFNR-HIGH.
ELSEIF S_AUFNR-LOW NE SPACE.
LOOP AT S_AUFNR.
WRITE: S_AUFNR-LOW.
ENDLOOP.
ELSEIF S_AUFNR-LOW EQ SPACE.
WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-012,SY-DATUM. " Date:
third line
WRITE:/ TEXT-003. " Req. Date:
IF S_BDTER-HIGH(1) NE '0'.
WRITE: S_BDTER-LOW, TEXT-TO1, S_BDTER-HIGH.
ELSEIF S_BDTER-LOW(1) NE '0'.
LOOP AT S_BDTER.
WRITE: S_BDTER-LOW.
ENDLOOP.
ELSEIF S_BDTER-LOW(1) EQ '0'.
WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-013, SY-PAGNO. " Page:
ENDFORM. " TOP_OF_PAGE
FORM END_OF_LIST *
FORM END_OF_LIST.
DATA: L_POS TYPE P.
ULINE.
WRITE:/ '|', TEXT-021. " Delivered by:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-031. " Received by:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
WRITE:/ '|', TEXT-012. " Date:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-012. " Date:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
ENDFORM. " END_OF_LIST
*& Form WRITE_USING_ALV
text
FORM WRITE_USING_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = REPNAME
I_INTERNAL_TABNAME = 'OUT'
I_INCLNAME = REPNAME
CHANGING
CT_FIELDCAT = FIELDTAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPNAME
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
I_STRUCTURE_NAME = 'OUT'
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDTAB
I_DEFAULT = 'A'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = EVENTS[]
IS_PRINT = PRINTS
TABLES
T_OUTTAB = OUT.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_LIST_DISPLAY'.
ENDIF.
ENDFORM. " WRITE_USING_ALV
THESE LINES ARE FOR THE INCLUDE ***
***INCLUDE Z_ALV_VARIABLES .
TYPE-POOLS: SLIS.
DATA: FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
HEADING TYPE SLIS_T_LISTHEADER,
LAYOUT TYPE SLIS_LAYOUT_ALV,
EVENTS TYPE SLIS_T_EVENT,
REPNAME LIKE SY-REPID,
F2CODE LIKE SY-UCOMM VALUE '&ETA',
PRINTS TYPE SLIS_PRINT_ALV,
TITLE(40) TYPE C,
G_SAVE(1) TYPE C,
G_EXIT(1) TYPE C,
G_VARIANT LIKE DISVARIANT,
GX_VARIANT LIKE DISVARIANT.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
FORMNAME_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
FORMNAME_BEFORE_LINE TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE',
FORMNAME_AFTER_LINE TYPE SLIS_FORMNAME VALUE 'AFTER_LINE'.
FORM MAIN_STATEMENTS *
THIS IS THE CODE THAT MUST BE INSERTED IN THE MAIN PROGRAM
FORM MAIN_STATEMENTS.
Declare the parameter P_VARI wherever you want it. If you don't
want it, hide it with NO-DISPLAY, but it must exist.
parameters: p_vari like disvariant-variant. " ALV Variant
You have to add the following line after the data and parameter
declaration:
include z_alv_variables.
Then, after the data/parameter declaration, add these lines:
*initialization.
repname = sy-repid.
perform initialize_fieldcat using fieldtab[].
perform build_eventtab using events[].
perform build_comment using heading[].
perform initialize_variant.
If you are using the variable P_VARI (ALV Variant), also add this:
*at selection-screen on value-request for p_vari.
perform f4_for_variant.
*at selection-screen.
perform pai_of_selection_screen.
After the "END-OF-SELECTION" statement, add these lines:
perform build_layout using layout.
perform build_print using prints.
perform write_using_alv.
You also have to create the following forms: (you can find samples
in this program)
INITIALIZE_FIELDCAT
USER_COMMAND (only if you are creating a STATUS)
WRITE_USING_ALV
ENDFORM.
*& Form INITIALIZE_FIELDCAT_SAMPLE
THIS IS A SAMPLE, DO NOT USE THIS FORM IN YOUR PROGRAM
-->P_FIELDTAB[] text *
FORM INITIALIZE_FIELDCAT_SAMPLE USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT. " Always clear before use
CAT-TABNAME = 'I'. " Your internal table
CAT-REF_TABNAME = 'ZCUSTMAS'. " The data dictionary reference table
CAT-FIELDNAME = 'KUNNR'. " Name of your field in the itable.
CAT-COL_POS = 1. " Output position
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'NAME1'. " Next field
CAT-COL_POS = 2.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'STRAS'. " and the next
CAT-COL_POS = 3.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'LOEVM'.
CAT-SELTEXT_S = 'Del'. " You can always override the descrip-
CAT-SELTEXT_M = 'Delivery'. " tion (short, medium, large)
CAT-SELTEXT_L = 'Delivery Num'.
CAT-COL_POS = 4.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'FKIMG'.
CAT-DO_SUM = 'X'. " You want totals calculated.
CAT-NO_OUT = 'X'. " and hidden.
APPEND CAT TO P_TAB.
ENDFORM. " INITIALIZE_FIELDCAT
*& Form BUILD_EVENTTAB
THIS IS THE SAME FOR ALL THE PROGRAMS
-->P_EVENTS[] text *
FORM BUILD_EVENTTAB USING P_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_LIST
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_END_OF_LIST TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_BEFORE_LINE TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_AFTER_LINE_OUTPUT
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_AFTER_LINE TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENTTAB
*& Form BUILD_COMMENT
NOT REALLY NEEDED, BUT I'LL LEAVE IT THERE, JUST IN CASE...
-->P_HEADING[] text *
FORM BUILD_COMMENT USING P_HEADING TYPE SLIS_T_LISTHEADER.
DATA: HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C,
SEP(20) TYPE C.
CLEAR: HLINE, TEXT.
HLINE-TYP = 'H'.
write: text-101 to text+23.
HLINE-INFO = TEXT.
APPEND HLINE TO P_HEADING.
ENDFORM. " BUILD_COMMENT
*& Form INITIALIZE_VARIANT
VERY IMPORTANT WHEN YOU USE VARIANTS!!!
FORM INITIALIZE_VARIANT.
G_SAVE = 'A'.
CLEAR G_VARIANT.
G_VARIANT-REPORT = REPNAME.
GX_VARIANT = G_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
I_SAVE = G_SAVE
CHANGING
CS_VARIANT = GX_VARIANT
EXCEPTIONS
NOT_FOUND = 2.
IF SY-SUBRC = 0.
P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDFORM. " INITIALIZE_VARIANT
*& Form PAI_OF_SELECTION_SCREEN
ALSO FOR VARIANTS
FORM PAI_OF_SELECTION_SCREEN.
IF NOT P_VARI IS INITIAL.
MOVE G_VARIANT TO GX_VARIANT.
MOVE P_VARI TO GX_VARIANT-VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
I_SAVE = G_SAVE
CHANGING
CS_VARIANT = GX_VARIANT
EXCEPTIONS
WRONG_INPUT = 1
NOT_FOUND = 2
PROGRAM_ERROR = 3.
IF SY-SUBRC EQ 0.
G_VARIANT = GX_VARIANT.
ELSE.
PERFORM INITIALIZE_VARIANT.
ENDIF.
ELSE.
PERFORM INITIALIZE_VARIANT.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
*& Form F4_FOR_VARIANT
text
FORM F4_FOR_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
IS_VARIANT = G_VARIANT
I_SAVE = G_SAVE
IMPORTING
E_EXIT = G_EXIT
ES_VARIANT = GX_VARIANT
EXCEPTIONS
NOT_FOUND = 2.
IF SY-SUBRC = 2.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF G_EXIT = SPACE.
P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDIF.
ENDFORM. " F4_FOR_VARIANT
*& Form BUILD_LAYOUT
STANDARD LAYOUT
-->P_LAYOUT text *
FORM BUILD_LAYOUT USING P_LAYOUT TYPE SLIS_LAYOUT_ALV.
P_LAYOUT-F2CODE = F2CODE.
P_LAYOUT-ZEBRA = 'X'.
p_layout-detail_popup = 'X'.
P_LAYOUT-TOTALS_TEXT = SPACE.
P_LAYOUT-SUBTOTALS_TEXT = SPACE.
ENDFORM. " BUILD_LAYOUT
FORM BUILD_PRINT *
STANDARD PRINT OPTIONS *
--> P_PRINT *
FORM BUILD_PRINT USING P_PRINT TYPE SLIS_PRINT_ALV.
P_PRINT-NO_PRINT_LISTINFOS = 'X'.
P_PRINT-NO_PRINT_SELINFOS = ' '.
ENDFORM. " BUILD_PRINT
FORM PF_STATUS_SET *
NAME YOUR STATUS ALV. IF YOU NEED IT.. *
FORM PF_STATUS_SET USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ALV' EXCLUDING EXTAB.
ENDFORM. " PF_STATUS_SET
FORM USER_COMMAND_SAMPLE *
--> UCOMM *
--> SELFIELD *
FORM USER_COMMAND_SAMPLE USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE UCOMM.
WHEN 'MSXL'. " Export to Excel
perform set_excel_export.
CLEAR UCOMM.
WHEN 'MM03'.
set parameter id 'MAT' field selfield-value.
call transaction 'MM03' and skip first screen.
CLEAR UCOMM.
WHEN 'BGR1'.
perform fill_available.
perform graph_available.
CLEAR UCOMM.
WHEN 'DOCU'.
call function 'Z_HELP' exporting repname = repname.
ENDCASE.
ENDFORM. " USER_COMMAND
*& Form WRITE_USING_ALV_SAMPLE
*THIS IS A SAMPLE AND MUST BE WRITTEN DIRECTLY IN THE MAIN PROGRAM
FORM WRITE_USING_ALV_SAMPLE.
YOU CAN MERGE WITH A DATA DICTIONARY TABLE USING THIS:
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = repname
i_internal_tabname = 'I'
i_inclname = repname
changing
ct_fieldcat = fieldtab.
if sy-subrc <> 0.
write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_FIELDCATALOG_MERGE'.
endif.
OR JUST DISPLAY IT USING THIS:
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = repname
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'I'
is_layout = layout
it_fieldcat = fieldtab
i_default = 'A'
i_save = g_save
is_variant = g_variant
it_events = events[]
is_print = prints
tables
t_outtab = i.
if sy-subrc <> 0.
write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_LIST_DISPLAY'.
endif.
ENDFORM. " WRITE_USING_ALV
thanks
mrutyun^ -
Where can we find the % of diamentions to that of fact table?
Where can we find the % of diamentions to that of fact table? To decide whether to make a diamention as Line Item.
Hi,
To see the disk space used from an InfoCube you should see TCode DB02 and should sum all the involved tables (Detailed Analysis -> Object Name "<IC_NAME>"), so E, F and DIM tables.
You can use RSRV -> All Elementary Tests -> Database -> Database information about infoprovider tables to get the rows in the fact tables and dimension tables.
You can also use the program SAP_INFOCUBE_DESIGNS.
Check this link:
Re: RSRV not showing number of records
I would rather advice you to relook at the design than go in for "line-item" dimension. You can go in for line-item dimesnion only if you feel the design is correct. The disadvantage of a line-tem dim is that you can have only 1 char in the dimension and you cannot revert back a line-item dim to a normal dim unless you empty the cube.
Bye
Dinesh
Maybe you are looking for
-
Mavericks upgrade from Snow Leopard broke boot camp. Help!
Since Apple made the newest version of OS X free, I decided to upgrade my 2010 MacBookPro from Snow Leopard. The installation seemed to go fine, but after the installation, I can't boot into my Bootcamp / Windows partition. From what I have read so f
-
My IPAD2 shuts down every 5 minutes,i have rebooted which didnt help...
my ipad 2 shuts down every 5 minutes,i have rebooted which doesnt work...very frustrating...
-
in cs6 I can drag the track source indicator to Audio 1, 2, 3 though I can't drag to audio 4,5, or 6. Why is this? Thanks.
-
Migration assistant and time/date
I just used the Migration Assistant to transfer over all data/apps/settings from my old MacBookPro to a new one. I noticed that the time on the new machine was off by 5 hours (ahead). I checked the settings and they were how I had them on the old lap
-
Can I get a friends itunes movie onto my iPod without overriding my stuff with all her stuff? I just want to add her movie to my iPod. How do I do it?