Can't find the Windows to go option in Control Panel.

I recently updated to windows 8.1 from 8. I am a huge user of Windows to go. They say Windows 8.1 to go is available on Windows 8.1 Enterprise. I have Enterprise, but I just cant find the option anywhere (Including Control Panel, where it was previously
found in Windows 8) Can anyone tell me where to find the Windows 8.1 To Go feature?

You can start the Windows To Go creator tool by starting pwcreator.exe located in C:\Windows\System32.
Blogging about Windows for IT pros at
www.theexperienceblog.com

Similar Messages

Where can I find the windows 8.1 product key

Where can I find the windows 8.1 product key for my HP Pavilion Model p7 – 1451. The HP came with windows 8 pre-installed and then I upgraded to windows 8.1 on-line free from Microsoft. I need the windows 8.1 product key to upgrade to windows 10.

Hi,
The key is in the BIOS of your machine, please use the following tool to get it:
http://www.belarc.com/free_download.html
When run this tool, it produces a report, scroll down to Software Management section. Windows 8 or 8.1 product key is in there.
You can also use the following tool to find out:
https://www.magicaljellybean.com/keyfinder/
Regards,

I can't find the authorize my computer option

i cant find the authorize this computer option

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(97391)

How do I authorize my computer? I can not find the "Authorize This Computer" option anywhere.

PLEASE READ ALL EMAIL. ANYONE THAT CAN HELP WOULD BE GREATLY APPRECIATED. As you read through the emails, you will see that "C" the customer service person responds the same way. All the emails are from the same thread. I would reply to his email, he would, I guess, copy and paste an answer, and the response is the same. He never pays attention to the previous emails. HELP PLEASE!!!
This is very frustrating to me. If you read back through your emails, you state the SAME INFO 4 times. If you would read my email AND see thescreen shots attached you would see. Why do you continuously state the same info..(SEE RED HIGHLIGHTS BELOW).I NEED HELP ASAP TO GET THIS TAKEN CARE OF...Do you have any other info EXCEPT for what is listed below??????
IT DOES NOT GIVE THE OPTION TO AUTHORIZE COMPUTER!
I HAVE NOT CHANGED ACCOUNT NAME
IT DOES NOT REPEATEDLY ASK TO AUTHORIZE COMPUTER BECAUSE IT DOES NOT GIVE THE OPTION TO START WITH.
I TRIED EVERYTHING AT http://support. apple.com/kb/TS1389, 3 TIMES NOW. (ATHORIZING PURCHASES, HAVE THE CORRECT NAME, REMOVING THE SC INFO FOLDER).
I NEED HELP! IS THERE A PHONE # I CAN CALL??? CAN THIS BE FORWARDED TO YOUR SUPERVISOR SINCE YOU ARE UNABLE TO HELP?
From: iTunes Store <[email protected]>
To:
Sent: Sunday, January 13, 2013 5:00 PM
Subject: Re: EL : (en_US) Connecting & Downloading; Follow-up:
Dear
Thank you for replying. It's C from iTunes Customer Support.
Addressing your concern is really important for me. I will do my best to answer your question.
S, if your computer is not currently authorized to play your account's purchases, when you try to play an iTunes Store purchase, the authorization dialog will appear. You will see the name of the account that purchased the item. If you've changed your account name, replace the old account name with the new name, then enter your password and click Authorize. This authorizes your computer to play the account's purchases.
If you are repeatedly asked to authorize your computer to play your purchases, you may find this article helpful:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
If you still cannot authorize your computer, please include a screen shot of any error received, as well as any additional details about the error itself.
Thank you for contacting the iTunes Store.
Have a great day!
Sincerely,
C
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
I work Friday to Tuesday, 10:00 AM to 07:00 PM CST.
Thank you for allowing me the opportunity to assist you.
I do not get an error, I do not even get the authorization dialog. I have sent 2 screen shots, they are attached.
When I try to play an iTunes store purchase, a bubble pops up and states that this computer is not authorized. It does not pop up account name or password. I have also completed everything stated in the http://support.apple.com/kb/TS1389 link.
This is very frustrating.
S
From: iTunes Store <[email protected]>
To:
Sent: Friday, January 11, 2013 3:22 PM
Subject: Re: EL : (en_US) Connecting & Downloading; Follow-up:
Dear S,
Thank you for replying. It's C from iTunes Customer Support.
I understand that you have been unable to play some of your iTunes Store purchases. Addressing your concern is really important for me. I will do my best to answer your question.
S, if your computer is not currently authorized to play your account's purchases, when you try to play an iTunes Store purchase, the authorization dialog will appear. You will see the name of the account that purchased the item. If you've changed your account name, replace the old account name with the new name, then enter your password and click Authorize. This authorizes your computer to play the account's purchases.
If you are repeatedly asked to authorize your computer to play your purchases, you may find this article helpful:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
If you still cannot authorize your computer, please include a screen shot of any error received, as well as any additional details about the error itself.
Thank you for contacting the iTunes Store.
Have a great day!
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
I work Friday to Tuesday, 10:00 AM to 07:00 PM CST.
Thank you for allowing me the opportunity to assist you.
Please see the attached document. I am unable to authorize computer.
S
From: iTunes Store <[email protected]>
To:
Sent: Saturday,
January 5, 2013 5:36 AM
Subject: Re: EL : (en_US) Connecting & Downloading; Follow-up:
Dear S,
Thank you for replying. It's C from iTunes Customer Support.
S, I understand that you have been unable to play some of your iTunes Store purchases, and I'll be happy to help you with this.
If your computer is not currently authorized to play your account's purchases, when you try to play an iTunes Store purchase, the authorization dialog will appear. You will see the name of the account that purchased the item. If you've changed your account name, replace the old account name with the new name, then enter your password and click Authorize. This authorizes your computer to play the account's purchases.
If you are repeatedly asked to authorize your computer to play your purchases, you may find this article helpful:
iTunes repeatedly prompts to authorize computer to play iTunes
Store purchases
http://support.apple.com/kb/TS1389
If you still cannot authorize your computer, please
include a screen shot of any error received, as well as any additional details about the error itself.
Thank you for contacting the iTunes Store.
Have a great day!
Sincerely,
C
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
I work from Tuesday-Saturday, 8.30 AM to 5.30 PM CST.
Thank you for allowing me the opportunity to assist you.
I try to play an iTunes store purchase, but it just gives the box that is shown in page 2. How can I authorize my computer?
From: iTunes Store <[email protected]>
To:
Sent: Friday, January 4, 2013 1:47 AM
Subject: Re: EL : (en_US) Connecting & Downloading;
Follow-up:
Dear S,
Welcome to iTunes Store Customer Support. My name is C.
I understand that you were unable to authorized your computer. I know how eager you must be to have this issue sorted out. I will be happy to resolve this concern today.
S, if your computer is not currently authorized to play your account's purchases, when you try to play an iTunes Store purchase, the authorization dialog will appear. You will see the name of the account that purchased the item. If you've changed your account name, replace the old account name with the new name, then
enter your password and click Authorize. This
authorizes your computer to play the account's purchases.
If you are repeatedly asked to authorize your computer to play your purchases, you may find this article helpful:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
If you still cannot authorize your computer, please include a screen shot of any error received, as well as any additional details about the error itself.
Thank you for contacting the iTunes Store.
Have a great day!
Sincerely,
C
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
I work from Tuesday-Saturday, 8.30 AM to 5.30 PM CST.
Thank you for allowing me the opportunity to assist you.
Details:
I am trying to authorize my new computer. I do not see AUTHORIZE MY COMPUTER anywhere. I see COMPUTER AUTHORIZATIONS, but not an option to authorize.

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

Where can I find the old 2D and 3D Industrial Controls that were sold as an option in early LabVIEW. The ones with pipes and pumps, etc.

A long time ago, I purchased as add-on to LV that had some rendered 2D and 3D pipes and pumps setup as custom boolean controls. I can not find my old ones. Are they still available somewhere?
Solved!
Go to Solution.

Just to add to Paul's answer, the LabVIEW Datalogging and Supervisory Control (LV DSC) still distributing the libraries. After installing, you can go to 'Tools' menu and under the DSC Module, you can find the "Image Navigator" which launch the UI to choose the pictures.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Can't find the Recompress All Frames option

Does anyone know how to access/locate the "Recompress All Frames" option mentioned on page 1015 of the Final Cut Express 4 Users Manual?
To quote the text:
+"Exporting a Self-Contained Movie Without Recompressing the Media+
+If you choose to export a self-contained movie, you have the option to not recompress+
+the media in your clip or sequence. If you deselect the Recompress All Frames option+
+and choose Current Settings from the Setting pop-up menu, Final Cut Express simply+
+copies frames from existing media files into the new file with no recompression. This is+
+a convenient way to export your media without subjecting it to recompression+
+artifacts. However, any media that must be created from scratch, such as a transition+
+between two media files, must be recompressed.+
+Important: The option to turn off recompression is unique to the Export QuickTime+
+Movie command. If you choose the Export Using QuickTime Conversion command,+
+every frame is always recompressed. "+
Whenever I click on a Sequence in the Browser, select FILE, then EXPORT, then QUICKTIME MOVIE the option does not exist, contrary to what is stated in the users manual. I am interested in locating this option as according to the manual, all other efforts to export the Sequence will result in a recompression of the video.

Just to add to what Michel said, when you export to QuickTime Movie the recompress all frames function is off by default. Because you can only export in current settings when you export to QuickTime Movie there is no real need for a recompress all frames button.

HT1414 I have disabled the auto synch on connection of the IPhone5 and now ITunes will not show the iphone as available. How can I find the dialog that will give me control over backup's?

Where -on iTunes - can I find a control that will enable me to synch the Iphone.
The auto synch on attaching is turned off

There is no merge feature for itunes content, never was. Merge applies only to contacts and calendar entries.
The itunes content sync is one way - computer to iphone. The exception is itunes purchases
You can transfer the purchases from the iphone to itunes before you sync. File>Transfer Purchases

I can't find biometric device in device manager OR control panel

I recently got a HP Probook 450 G2 running Windows 7 x64, and it came with a built-in fingerprint scanner. HP Client Manager was also pre-installed, and what really caught my attention was its fingerprint function. Although, every time I opened the function, a message saying "The fingerprint reader is not connected. Connect the reader" popped up at the bottom. After doing a bit of research on why it wouldn't work, I found out that it had something to do with biometric systems, which I attempted to locate on device manager AND control panel, but no luck. Did I do something wrong?

EggZachLee wrote:
So, I can't do much with the little fingerprint window? (Sorry for the bad english.)
Hi,
You need a sensor, otherwise window is just a hole. Please try Finger orint software:
ftp://ftp.hp.com/pub/softpaq/sp48501-49000/sp48509.exe
then
ftp://ftp.hp.com/pub/softpaq/sp61001-61500/sp61498.exe
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I can't find the "authorize my computer" option on iTunes.

I can find it on a PC but have no clue regarding where it is on the iMac.

click on the store menu in the iTunes menu bar.

Where can I find the Windows Captivate 5.5 download file?

Greetings!
We are currently still using Captivate 5.5. We will be upgrading in 2013 to 6.
My fellow producer and myself just had new hard drives installed and need to reinstall Captivate 5.5.
We own a downloaded upgrade from 4.
We have both reinstalled 4 and need to run the upgrade to get us back to 5.5 but the file is nowhere to be found on Adobe's site.
Suggestions on how we can get it?
Thanks!

Hello,
Welcome to Adobe Forums.
Please send you Captivate 5.5 License Information (Serial Number or Order Number) to [email protected] and I will make sure that you have Captivate 5.5 Installation Setup.
Thanks,
Vikram

I can't find the menu in the iTunes store with the option to authorize my computer.

I can't find the authorize this computer option in the iTunes store. There is no menu item like this. Can anyone help? Really stinks that the instructions don't match the software. : - (

Press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(85895)

I can't see the show status bar option in iTunes 11

I can't find the 'show status bar' option in the View Option section, it simply isn't there. Also, every time I go to the store, iTunes crashes.

Are you working with Pretest Questions?
Is it happening with specific sldie, can you chekc the slide type and verify again.
Pretest do not allow skin-playbar to appear.
Thanks,
Anjaneai

Customizing the "Configuration Manager" client found under Control Panel

Running: SCCM 2012 R2
How can you customize what an end user can see in the client "Configuration Manager" tool under Control Panel?
I saw this in an environment where certain parts were greyed out or where the action list was only limited to a few entries. How was this accomplished?

That's related to the level of permissions that the user has on the local system and UAC. The tabs of
Cache, Network and Site require UAC elevation before those settings can be adjusted and those tabs will be grayed-out without.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How do I view what slide I'm on out of how many I have total in keynote? I know on powerpoint it's at the bottom right of the window but I can't find it on keynote nor can I find the option to make it appear. Any help would be greatly appreciated.

How do I view what slide I'm on out of how many I have total in keynote? I know on powerpoint it's at the bottom right of the window but I can't find it on keynote, nor can I find the option to make it appear. Any help would be greatly appreciated.

Your steps so far are OK but you may want to try:
1 Trash your user library Caches folder (House Icon with short name in Finder window (hard drive window)GOTO:House icon > Library folder > caches folder
2 Trash the com.apple.Safari.plist file in User library > preferences folder > Safari.plist as well as removing the library Safari folder its self.
3 you can selectivly re-install Safari 2.0 from your OS Tiger Install disk 1, (see Knowledge base article 301229 for how to just select the Safari Application) without doing a complete system Archive and Install.
4. Create a new Test user account on the system and test how Safari responds in the Test user, see if its a user related issue and not system issue.
5. Still no Safari response? have to do an Archive and install (not preserving user and network settings)article 107120
PS. Issue may be related to actual internet connection connectivity, power cycle cable modem and router or airport if using one as well as the computer(keep unplugged for 3-5 min) and plug the cable modem in and then the router/airport then power on the computer. Do the Airport Admin utiliy (applications, utilities on HD_1)update.
- do a hard reset of airport knowledge base article 108044(Express base) and 107451 (Extreme base)
- Check with internet provider for connection issues "cannot find server" ect.

Running FOXFIRE 6.0 on a Windows 7system and when I go to Sync I can not find the option of adding another device. Where is it?

Trying to sync another computer to sync, but going from Tools to Options to Sync I can not find the Add A Device choice. have looked everywhere but can not find the frame that allows me to enter the codes from the second computer. Have installed the sync function on the first computer and have received a sync key.
What am I missing and where do I find "Add A Device"?

Thanks for trying to help solve a problem in Foxfire's sync function. I guess I haven't done a very good job describing the problem so I'll try again.
My desktop computer is running Windows 7 and Foxfire 6.0. I had no problem establishing a sync account and obtaining the Foxfire Sync Key. Now I would like to sync my Asus Eee Transformer Tablet running Android 3.2 and Foxfire 3 (for Android). On the tablet I go to Sync, then Connect, and get the three-box code to be entered on the desktop computer where the sync account was established. So far, so good.
I then go back to the desktop computer and in Foxfire click Tools, then Options, then click on the Sync symbol, then click on Set Up Foxfire Sync, which is the only option available. I am then taken to a page with two options: Create A New Account, or Connect. sunce I have already created an account I click on Connect. I then get a page with a three box code and am told to go to the other device (the tablet) and select Add A Device. Unfortunately, on the tablet the only choices available are Sync and connect, which returns a three box code. No where can I find a page or an option fo Add A Device and enter the three box code.
So, in summary, I can not find w page to Add A Device and enter the three box code on either the desktop computer or the tablet. If all else fails, I guess I can go back to day one and establish a new sync account on the desktop computer, or completely give up on the sync, which is a nice feature but one that doesn't work.

Can't find the Windows to go option in Control Panel.

Similar Messages

Maybe you are looking for