Can't 'find' using multiple criteria anymore

Did something change in Finder such that we can't set multiple criteria for searches any more? Or is my Finder corrupt in some way?
In a finder "Find" window, I have the search bar showing "This Mac" the current folder and the options "Contents" and "File Name" -- then there's "Save" and the little '+' icon. It used to be I could add additional search criteria by clicking the '+' (such as file visibility, extension, etc.) -- but now, clicking the '+' just opens an empty space below the existing search bar.
Is there a 'Simple Finder' setting somewhere that got switched without my knowledge causing this? Or is my Finder borked?
Thanks,
Scott

Well, I'd try moving the finder prefs file, but last night when I went to restart my MBP to deal with something else, on restart all video was gone. I even tried booting into the Apple Hardware Test on the Leopard install DVD, and while it seemed to boot up okay, there was nothing on the screen at all.
Took it into an Apple Store this morning, and they ran a test, and found the graphics card/chip not even registering - so it looks like I'm into a new logic board. Thanks goodness I got AppleCare this time!!
So, when I get my baby back, I'll see if the Finder issue is still there, and if so, then I'll try moving the finder prefs file out.
Thanks,
Scott

Similar Messages

Finder - search multiple criteria doesn't work ("+" missing)

I used to be able to search on multiple items in finder by clicking Cmd+F, start typing, then hitting the "+" key to start adding criteria. I can't seem to figure out how to do this on Mavericks (currently 10.9.5), and I can't find an article to tell me the answer. For example, I want to find files with names matching "maverick" modified in the last 14 days, with size > 2MB...
Thank you, Ron

So, I created a test report using "select * from floor_suite_billing" and did a search. This new report came up in the results but the other one didn't.
Then I tried searching for other keywords from the query but that report still does not show up..
does anyone have a reliable way of searching Apex?
Thanks!
John

Can't find the manual setup anymore

Hi Community!
Yesterday I got myself a TC 2 TB for my MBP and PC setup. Everything went fine with the setup so far. The airport setup assistant guided me through to make my basic settings. Now I would like to make fine adjustments here and there. But when I open the Airport Utility now I can't find the assistant or the manual setup anymore. Where did it go? All I get is the cool graphic with the internet globe and my TC at the bottom. When I click on the TC I can edit, but not for example my printer for sharing over the TC and other configurations that were present during the initial setup.
How do I get the manual setup back?
Cheers, Zoober

Just how do I get rid of the 6.0 version. I tried deleting it but a message said it is a utlity app and can't be deleted. I'm really sorry, I'm new to the Mac world.
Suggest that you leave it on your Mac and wait for further updates and improvements.
It is possible to delete the application, but you must use Terminal commands to do so. The Terminal is a scary place for most of us. Best to leave things alone.
You can keep both 5.6 and 6.0 on your Mac

Can you access/use multiple apple ID's on one device?

Hello,
In our family we have been registering everything (ipods, iphones and computers) all under one apple id. We have made purchases with the family apple id which we have been accessing on multiple devices. With everyones different needs I am wondering about setting up new apple id's for different family members. Can I use multiple apple id's on devices like my iPhone and still access apps/books/music purchased on the family apple id's and if so how do I do this.
Thank you in advance for your help.

Why do you have 3 Apple IDs?
Apple IDs cannot be merged and items bought with one Apple ID cannot be transfered to another. A computer can only be associated with one Apple ID every 90 days for automatic downloads, re-downloading of past purchases or iTunes Match. There is no getting around this restriction.
One computer can be autorized to play content purchased with multiple Apple IDs, though.
My suggestion is to pick on Apple ID and stick with it for the future. Once you have decided, log into one of the other Apple IDs and download every avialble item you bought with that ID to your computer. Wait 90 days. Log into the other ID and do the same thing. Wait 90 days. Finally log into the "main" Apple ID and stay logged in. Keep current backups of all your purchased items on a local, external HDD.

Why named parameter can't be used multiple times in PL/SQL block in JDBC

with the following PL/SQL block, when I run int in JDBC, I get an error,
it says, The number of parameter names does not match the number of registered parameters.
if all named parameters are used only once, then my program works fine.
My old program uses Oracle Forms to run the attached PL/SQL block correctly, I just want to run them in JDBC without more efforts, I don't want to rewrite all PL/SQL blocks.
Does oracle driver support this case? why the PL/SQL block can work in Oracle Forms but failed in JDBC?
Can we have an another solutions to avoid rewriting the PL/SQL block to stored procedure?
if I use following SQL:
BEGIN if :q is null then :q := 'X'; else :q := 'Y'; end if; END;
, Using java program:
import java.sql.*; public class RunPLSQLBlock { public static void main(String s[]) throws SQLException { String URL = "jdbc:oracle:thin:@192.168.11.199:1521:TIBSTEST"; Connection con = null; try { Class.forName("oracle.jdbc.driver.OracleDriver"); con = (Connection) DriverManager.getConnection(URL, "FBP1DEV", "FBP1DEV"); String SQL = "BEGIN if :q is null then :q := 'X'; else :q := 'Y'; end if; END;"; CallableStatement stmt = con.prepareCall(SQL); stmt.registerOutParameter("q", Types.VARCHAR); stmt.setString("q", "A"); stmt.execute(); } catch (Exception e) { e.printStackTrace(); } finally { if (con != null) { con.close(); } } } }
in the coding, only "q" registered, I got:
java.sql.SQLException: The number of parameter names does not match the number of registered praremeters at oracle.jdbc.driver.OracleSql.setNamedParameters(OracleSql.java:314) at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:10096) at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:5693) at RunPLSQLBlock.main(RunPLSQLBlock.java:28)
now, tried to register 3 indexes, changed fragments are below.
import java.sql.*; public class RunPLSQLBlock { public static void main(String s[]) throws SQLException { String URL = "jdbc:oracle:thin:@192.168.11.199:1521:TIBSTEST"; Connection con = null; try { Class.forName("oracle.jdbc.driver.OracleDriver"); con = (Connection) DriverManager.getConnection(URL, "FBP1DEV", "FBP1DEV"); String SQL = "BEGIN if :q is null then :q := 'X'; else :q := 'Y'; end if; END;"; CallableStatement stmt = con.prepareCall(SQL); stmt.registerOutParameter(1, Types.VARCHAR); stmt.registerOutParameter(2, Types.VARCHAR); stmt.registerOutParameter(3, Types.VARCHAR); stmt.setString(1, "A"); stmt.execute(); } catch (Exception e) { e.printStackTrace(); } finally { if (con != null) { con.close(); } } } }
now error changed to:
java.sql.SQLException: ORA-01006: bind variable does not exist at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457) at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:400) at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:926) at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476) at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:200) at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:543) at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:208) at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1416) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1757) at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:4372) at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:4595) at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:10100) at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:5693) at RunPLSQLBlock.main(RunPLSQLBlock.java:26)
, now tried register only 1 position like below,
CallableStatement stmt = con.prepareCall(SQL);   stmt.registerOutParameter(1, Types.VARCHAR);   stmt.setString(1, "A");   stmt.execute();
, it says:
java.sql.SQLException: Missing IN or OUT parameter at index:: 2 at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:2177) at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:4356) at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:4595) at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:10100) at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:5693) at RunPLSQLBlock.main(RunPLSQLBlock.java:26)
, now let try a OK case, which use all named parameters only once. coding like below, SQL and Java listed below.
BEGIN if :q is null then :r := 'X'; else :s := 'Y'; end if; EXCEPTION   WHEN NO_DATA_FOUND THEN     NULL; END;
import java.sql.*; public class RunPLSQLBlock { public static void main(String s[]) throws SQLException { String URL = "jdbc:oracle:thin:@192.168.11.199:1521:TIBSTEST"; Connection con = null; try { Class.forName("oracle.jdbc.driver.OracleDriver"); con = (Connection) DriverManager.getConnection(URL, "FBP1DEV", "FBP1DEV"); String SQL = "BEGIN if :q is null then :r := 'X'; else :s := 'Y'; end if; END;"; CallableStatement stmt = con.prepareCall(SQL); stmt.registerOutParameter("q", Types.VARCHAR); stmt.registerOutParameter("r", Types.VARCHAR); stmt.registerOutParameter("s", Types.VARCHAR); stmt.setString("q", "A"); stmt.execute(); System.out.println("Q :" + stmt.getString("q")); System.out.println("R :" + stmt.getString("r")); System.out.println("S :" + stmt.getString("s")); } catch (Exception e) { e.printStackTrace(); } finally { if (con != null) { con.close(); } } } }
, the case give us the following output:
Q :A R :null S :Y
2nd part, I also tried another scheme, to use 'execute immediate', test code attached below, it also have errors.
begin execute immediate 'begin if :q is null then :q := ''X''; else :q := ''Y''; :r := ''Z''; end if; end;' using in out :q, out :r; end;
, Java Code:
import java.sql.*; public class RunDynamicSQL { public static void main(String s[]) throws SQLException { String URL = "jdbc:oracle:thin:@192.168.11.199:1521:TIBSTEST"; Connection con = null; try { Class.forName("oracle.jdbc.driver.OracleDriver"); con = (Connection) DriverManager.getConnection(URL, "FBP1DEV", "FBP1DEV"); String SQL ="begin execute immediate 'begin if :q is null then :q := ''X''; else :q := ''Y''; :r := ''Z''; end if; end;' using in out :q, out :r; end;"; CallableStatement stmt = con.prepareCall(SQL); stmt.registerOutParameter("q", Types.VARCHAR); stmt.registerOutParameter("r", Types.VARCHAR); stmt.setString("q", "A"); stmt.execute(); System.out.println("Q :" + stmt.getString("q")); System.out.println("R :" + stmt.getString("r")); } catch (Exception e) { e.printStackTrace(); } finally { if (con != null) { con.close(); } } } }
, the output is, we can find when parameter 'q' is IN OUT mode, we can't get its final value:
Q :null R :Z
, now I tried my workaround, it works fine by using a temporary variable, now my named parameter is split to 2 roles, one is for IN, another is for OUT, now I can get final out value.
declare q clob; r clob; begin q := ?; r := ?; execute immediate 'begin if :q is null then :q := ''X''; else :q := ''Y''; :r := ''Z''; end if; end;' using in out q, out r; ? := q; ? := r; end;
, my test java code,
import java.sql.*; public class RunDynamicSQL { public static void main(String s[]) throws SQLException { String URL = "jdbc:oracle:thin:@192.168.11.199:1521:TIBSTEST"; Connection con = null; try { Class.forName("oracle.jdbc.driver.OracleDriver"); con = (Connection) DriverManager.getConnection(URL, "FBP1DEV", "FBP1DEV"); String SQL ="declare q clob;r clob; begin q := ?; r := ?; execute immediate 'begin if :q is null then :q := ''X''; else :q := ''Y''; :r := ''Z''; end if; end;' using in out q, out r; ? := q; ? := r; end;"; CallableStatement stmt = con.prepareCall(SQL); stmt.registerOutParameter(3, Types.VARCHAR); stmt.registerOutParameter(4, Types.VARCHAR); stmt.setString(1, "A"); stmt.setString(2, "A"); stmt.execute(); System.out.println("Q :" + stmt.getString(3)); System.out.println("R :" + stmt.getString(4)); } catch (Exception e) { e.printStackTrace(); } finally { if (con != null) { con.close(); } } } }
, the output is expected,
Q :Y R :Z
Database:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
JDBC Driver, extracted from ojdbc6_g.jar/META-INF/MANIFEST.MF :
Created-By: 1.5.0_30-b03 (Sun Microsystems Inc.)
Implementation-Vendor: Oracle Corporation
Implementation-Title: JDBC debug
Implementation-Version: 11.2.0.3.0
Repository-Id: JAVAVM_11.2.0.3.0_LINUX_110823
Specification-Vendor: Sun Microsystems Inc.
Specification-Title: JDBC
Specification-Version: 4.0
Main-Class: oracle.jdbc.OracleDriver
JDK:
java version "1.7.0"
Java(TM) SE Runtime Environment (build 1.7.0-b147)
Java HotSpot(TM) Client VM (build 21.0-b17, mixed mode, sharing)
Edited by: jamxval on 2013-3-22 2:01PM (UTC+08:00), Give full test java program and SQL, added environment/API level; Attached another problem.
Edited by: jamxval on 2013-3-26 17:57 (UTC +08), Adjust code style

Hi, thanks for your response, now I see, the named parameter is for stored procedure only, for PL/SQL block we name it placeholder name.
After cast my java.sql.CallableStatement to oracle.jdbc.OracleCallableStatement, I can find setStringAtName,
now, I have only one question:I can't find corresponding methods for registerOutputParameter, how we fetch output value?
I tried to callableStatement.getString("q"); it reports errors, but there are no ordinal binding in my source code, does placeholder names doesn't support OUT mode?
Java:
CallableStatement stmt = con.prepareCall("BEGIN if :q is null then :r := 'X'; else :s := 'Y'; end if; END;");
oracle.jdbc.OracleCallableStatement call = (oracle.jdbc.OracleCallableStatement) stmt;
call.registerOutParameter("q", Types.VARCHAR);
call.registerOutParameter("r", Types.VARCHAR);
call.registerOutParameter("s", Types.VARCHAR);
call.setStringAtName("q", "A");
call.setStringAtName("r", "A");
call.setStringAtName("s", "A");
call.execute();
System.out.println("Q :" + call.getString("q"));
</Java>
<output>
java.sql.SQLException: 不允许的操作: Ordinal binding and Named binding cannot be combined!
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.OracleCallableStatement.getString(OracleCallableStatement.java:2834)
     at RunPLSQLBlock.main(RunPLSQLBlock.java:33)
</output>by the way, in my below-mentioned SQL 'problematic', when my code uses 'execute immediate' and use placeholder names in IN OUT mode, we always get NULL value (i.e. ':q'), but we can get final value of ':r' when ':r' is OUT mode only; now I get a workaround attached in below-mentioned 'my workaround' block, which split the IN OUT roles to 2 parts, it can work now;
It seems that the difference between 'problematic' and 'my workaround' imply that there are something work unexpectedly when the driver process the placeholder names, because 'my workaround' and ':r in problematic case' make sure the 'execute immediate' returned output values correctly, unluckly driver layer can't get return values.
<SQL name = 'problematic'>
begin
     execute immediate 'begin if :q is null then :q := ''X''; else :q := ''Y''; :r := ''Z''; end if; end;'
     using in out :q, out :r;
end;
</SQL>
<SQL name='my workaround'>
declare
     q clob;
     r clob;
begin
     q := ?;
     r := ?;
     execute immediate 'begin if :q is null then :q := ''X''; else :q := ''Y''; :r := ''Z''; end if; end;' using in out q, out r;
     ? := q;
     ? := r;
end;Edited by: EJP on 26/03/2013 14:14

[DeskI XI 3.1] Can't find the "CurrentUser" function anymore

Hi to all,
I'm moving some BO 6.5 reports to our new BO XI 3.1 release...I've got these reports which use the function "CurrentUser" (I'm not sure that's the English name, I've got it in Italian)...however, this function seems to have been disappeared from Desktop Intelligence! I can't find it in the list of functions, and if I write it I get an error that the function doesn't exist.
However, in the DeskI help on functions, the CurrentUser is still listed...
Any idea?
Thanks
Daniele

Hi,
I've found an answear: somehow, it's a translation issue I believe, because I've found the function to be associated to a name like this: =Componente aggiuntivo aziendale() (it means Additional company component).
Still, it's impossible to call the function...so I believe I'll have to wait for a fix from SAP?
Hope to hear something soon from you
Daniele
[A screenshot of the problem on the function editor|http://www.forumtopics.com/busobj/files/thumbs/t_utenteattuale_173.jpg]
Edited by: Daniele Tiles on Aug 10, 2009 2:36 PM

Can one JVM use multiple X Windows displays?

I'm probably clutching at straws here, but is it possible for one JVM to use multiple X Windows displays? Consider this, I've got multiple video cards and each card has a different X session running on it (localhost:0 and localhost:1 for example). I start up a JVM that is displaying to :0 but I also want it to be able to display windows also on :1 without having to instantiate a new JVM.
Is this at all possible and any ideas on how it might be done?

yes, this can be done. I think that you need to set the GraphicsDevice for the JFrames and JDialogs so that they appear in the right place. look at the class GraphicsEnvironment for more information.

HT1338 in version 5: i can't find my downloads widget anymore.....anyone?

hi! i recently purchased and successfully downloaded version 10.5.8 and all was fine. i've suddenly lost the "download" widget and cannot download, open docs, or images. anybody know why?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

I can't find/use an app and now i want uninstall it

Well because it takes up space and if I don't make use of it and it doesn't benefit me in anyway I would want it gone. Wouldn't you?

So for some time now I've got Pin Interest installed. But to this day I haven't accessed the app because it doesn't appear on my apps. Whenever I check the store for Pin Interest it always says I have the app installed. Did it magically disappear or does my phone have a bug, I haven't a clue. So now I want it removed because I can't even use it but I don't know how to. Please please respond immediately. Thank you and kudos!

ID-CS4 -JS - - Can't find using Grep options - Reg.

Dear All,
Here I have a doubt about the "Find / Change Grep" in InDesign CS4.
I can find the "Force Line Break" using the Grep options : ([a-zA-Z]*)-\\n([a-zA-Z]*)]
Some time this Grep is working, some time this is not working ...
I don't know what I made the mistakes. Please let me know any one can suggest and modify the below coding.
I supposed to close and re-open the InDesign CS4 and ExtendScript tool, then First time this Grep is working fine...
So I confused this. Please any one can give me a solutions.
//================= Coding ==================//
   var myDoc= app.activeDocument;
       app.findChangeGrepOptions.includeFootnotes = false;
       app.findChangeGrepOptions.includeHiddenLayers = false;
       app.findChangeGrepOptions.includeLockedLayersForFind = false;
       app.findChangeGrepOptions.includeLockedStoriesForFind = false;
       app.findChangeGrepOptions.includeMasterPages = false;
       app.findGrepPreferences.findWhat = "([a-zA-Z]*)-\\n([a-zA-Z]*)";
         mySearch = app.findGrep();
         for(var myForce =0; myForce<mySearch.length; myForce++)
          app.select(mySearch[myForce]);
          var mySel = app.selection[0];
           myConts = mySel.contents;
          app.select(mySearch[myForce]);
          var mySel = app.selection[0];
           myConts = mySel.contents;
          app.findGrepPreferences = NothingEnum.nothing;
           app.changeGrepPreferences = NothingEnum.nothing;
//=============== End of the Coding ========================//
Please any one can kindly help me....
Thanks & Regards
T.R.Harihara SudhaN

Dear Vaasu Devi,
Many thanks for your reply...
I found, where I mistaken....
Here My Correct Code :
//================= Coding ==================//
   var myDoc= app.activeDocument;
       app.findChangeGrepOptions.includeFootnotes = false;
       app.findChangeGrepOptions.includeHiddenLayers = false;
       app.findChangeGrepOptions.includeLockedLayersForFind = false;
       app.findChangeGrepOptions.includeLockedStoriesForFind = false;
       app.findChangeGrepOptions.includeMasterPages = false;
       app.findGrepPreferences.findWhat = "([a-zA-Z]*)-\\n([a-zA-Z]*)";
         mySearch = app.findGrep();
         for(var myForce =0; myForce<mySearch.length; myForce++)
                    app.select(mySearch[myForce]);
                     myConts = mySearch[myForce].contents;
                     $.writeln(myConts);
          app.findGrepPreferences = NothingEnum.nothing;
           app.changeGrepPreferences = NothingEnum.nothing;
//=============== End of the Coding ========================//
app.select() is working fine, meanwhile, I get the selection of the contents. That time only its throw the Error message. So I used to divert, app.select and Select Value of Contents to pass the "myConts" variable then I will do the other funtions.... Now My this time I'm not getting the Errors...
Thanks Once again
Regards
T.R.Harihara SudhaN

How can I better use multiple displays as if they were multiple computers?

In Mavericks I read online that multiple display support is the best it's ever been, but it's still very frustrating. Is there any way to get the "multi displays are different spaces" option to act more as it promises? Photoshop, for instance, refuses to let me move all of its control windows to my calibrated display, forcing me to go back and forth between my Eizo and internal monitors; one for its colors and the other for the tool pallates.
I want to use my MacBook display just for email and such, so I don't want to close the lid, but I wish it could be really segrigated. The experience I'm looking for is sort of like 2 computers with a shared keyboard and mouse. One dock per display is desprately needed. Can that be done?
Also allowing each display to have one applicatioin currently in front when multiple input devices are present would be greatly appreciated. I could then keep one keyboard and tablet in front of the Eizo and use the internal for use on the Macbook - if the OS could learn my setup it could really be the best of the benefits of having 2 computers and just one. Shared Clipboard and one Space colaborating seamlessly with another, while having the abillity to work entirely within one space and then move to the other while waiting for a command to finish executing, or to go back to the file system to open more work.
This is so close to perfect but it has a few really frustrating limitations. Any advice?
thank you
-Jeremy

data.
At least your query seems to get data where MODIFIED_BY IS NULL, doesn't it?
So if the reccount is>0 there is a reason to inform your employees.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

Search function - can't find talk show appearances anymore

[I apologize if this has been addressed elsewhere, I couldn't find mention of it.]
If I search for a favorite actor, I'll get his or her filmography--in that horrid "here are big, often-redundant and not-really-useful pictures that you can't turn off because who needs all that pesky written info in a reasonably-sized font anyway" display-- but no info about talk-show appearances.
It's not a search if it doesn't actually search everything. Is this going to get fixed?

I had raised this issue a few days ago, thought it was only me - http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/Recording-keyword-search/td-p/769537.
Basically you can no longer search program content. I spent a long time on the phone and got a ticket opened, which was closed a day later with 'this functionality will be returned in a future release'. No eta.

I can't find proofreader on pages anymore.

I can no longer find proofreader after recently updating pages and really would like it back... Any suggestions? Thanks!

I assume you are using Pages 5. The version of Pages & version of OS X are details that are critical, especially in this time of two vastly different versions of Pages.
In Pages 5 there is now a grammar checker in the Edit menu. I have no idea how well it works as I use Pages 4.3 to actually get any work done.

The attachment can not find using method CL_CRM_DOCUMENTS~GET_INFO

Hi Dear Experts,
I'm new guy in CRM, I used to develop in ECC. Here I encount an issue. We have attachment in the order. On web UI we can see the attachment is attached on the order. But when I use method CL_CRM_DOCUMENTS~GET_INFO to get the information of the attachment, I get nothing.
I get GUID via table CRMD_ORDERADM_H with OBJECT_ID = order ID, get GUID and OBJECT TYPE, past it into method GET_INFO's interface BUSINESS_OBJECT, But I can not get anything. I go to SU53, there are no authorization meesage about this method. Actually it informs me that I lost authorization object S_TABU_NAM, but it is related with SE16. So I don't think this cause the failure of get_info.
Can anyone kindly give me any hints? Thank you so much.
Regards
Jay

Hi Experts,
I find that these attachments are Archived. So I think I can't get their information. So the next step is how to get the link information. Thanks.
Regards
Jay

Saving Documents, can't find using Finder, over last week.

Over last week, I've been creating documents using 'Pages' from iWork09,
then (apparently) saving them successfully in 'Documents' in 'word' format(.doc).
When I attempt to find them again, either using 'All Documents' or 'Today'
or 'Last Week,' these documents aren't present.
This is true for 'newly created' documents or modifying 'older' documents,
then saving the 'modified' documents with a new 'name' still in 'word' format.
Today, while attempting to 'save' a document, I saw in lighter text, the files/documents
I'd 'saved' over the last week. I couldn't recover them, however.
I run OS 10.6.8(Snow Leopard) with last updates from May 2014. I can't always
successfully download and install updates; I get a message which reads, 'to install
these updates, first restart computer, then install.' When I attempt to do so, I can't
install the updates. I'm successful in installing updates ~ 1/6 times if I first show details.
The biggest problem is loss of 'saved' documents.
Does anyone have any thoughts? Thanks in advance.
PS I run Firefox 30.0, as my bank suggests.

If you open a Finder window (File > New Window) and navigate to Documents, do you see the files you created?
Sort in List view. Click on Date Modified column.
Let's start by running the combo updater over your install to refresh your files. Since you are having issues updating, you might want to start in Safe Boot mode to run the installer.
Combo updater: Mac OS X 10.6.8 Update v.1.1 - 1.09 GB
http://support.apple.com/kb/DL1399
Safe boot
* shutdown
* start the Mac and *wait* for the startup chime to sound
* after the sound, press and hold down the shift key
* keep holding and *wait* until the grey  Apple logo appears
* now release the shift key and just wait (it could take a few minutes)
* eventually the login screen appears with the words SAFE BOOT
* login and run the combo updater.
Next, we want to reindex your Spotlight cache files.
Open System Preferences under the Apple in the Menu bar.
Select Spotlight.
Click on Privacy tab.
Add your Macintosh HD to Privacy. Wait a few minutes as this deletes the cache files.
Remove from Privacy. This will cause your drive to reindex. This could take some time depending on size.
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.6.8 install from a regular update, just run the 10.6.8 Combo Updater on that system.
"Delta" updaters can only take you from one version to the next. For example: 10.6.7 to 10.6.8. If somehow the 10.6.8 is missing something it should have, and that something isn't changed between 10.6.7 and 10.6.8 it will still be stale after the delta update.

Can't 'find' using multiple criteria anymore

Similar Messages

Maybe you are looking for