Can't find windows files or folders that were migrated

I'm new to mac. Used migration assistant to transfer my data files and folders from windows 7 system.  The files are there as I can search for a specific file and find it but I don't see any of the folders or files in finder.  I have reviewed other forum entries asking questions like this and answers seem to direct folks to another user account but I don't have another user account on this system after migrating.  Help!

found them...had to change settings in finder to include my device, and started at top of hard drive and got to them

Similar Messages

  • Need help with Runtime error! Can't find "MediaDatabase" file! Folders are visible!

    Hi, I have been searching a lot for an answer to this issue. Elements keeps crashing after about five minuets and giving me "Microsoft Visual C++ Runtime Library" "Runtime Error!" "R6025 - pure virtual function call". I am running Premiere Elements 9.0 on windows 8.1 and I am trying to
    rebuild the "mediadatabase.db3" file, but cannot find it. I made my hidden folders visible, and followed the pathway, but I only get this. I have searched and searched but I can't find anything about windows 8.1. Only 7 and vista. Thanks in advance!

    Look for a line that resembles the following in the
    actionscript of the Flash fla files... It is likely to be in the
    first frame's code, but may not be.
    xmlData.load("teamTSI_en.xml");
    the '
    xmlData' part of that is not likely to be the same as what's
    in your file, it's a variable so it could be anything, and the file
    names will be whatever your xml files are.
    If you can post that line of code from each of the fla files,
    someone may be able to tell you where you need to place the xml
    files.

  • Can't open .inx files in CS3 that were created in CS2

    I am presented with a message..
    'Indesign.exe has encountered a problem and needs to close. We are sorry for the inconvenience.'
    This happens when I open a .inx file from it's location by double clicking on it and also if I open CS2 and use the file>open route...
    Any help would be greatly appreciated.
    Thanks

    Bear in mind that when you open a CS2 .inx with CS3 (assuming that it works), there is no information about the CS2 composition in the file, so CS3 composes everything. Thus, you might well see reflow that you won't see if you just open a CS2 file with CS3.
    On the other hand, if you do open a CS2 .indd with CS3 with the intention of doing further work on it, be prepared for that reflow to suddenly happen the moment you start trying to edit any text.
    This is actually a good argument for going the .inx route in the first place -- all surprises of layout and composition hit you in the face immediately rather than happening hapharzardly as you work with the document.
    You could use the Document Reflow command (Ctrl + Alt + /) after opening the .indd to get the composition changes over with in one swell foop.
    Dave

  • Can't install AR 11.0.04, "Can't find specified file."

    Presently using Adobe Reader X 10.1.6 on Windows 7 64-bit and get an error messge when trying to install Adobe Reader 11.0.04: "Can't find specified file."  However, that file is not identified.  Help me to install the updated AR.

    Thank you for your hekp as I finally have been able to dl 11.0.04.  The dl was successful because following your suggestions I initially kept getting the same kind of error messages saying that I had to log on as an administrtor.  Well, permissions with Windows was never my strong spot.  Never really understood how to handle them.  However, as it was early in the morning and my mind was somewhat clear, I started fiddling around with "Taking Ownership" and Security within properties.  First, after Taking Ownership of just about anything having to do with Adobe, I still was getting error messages about logging on as an Administrator...but, I am the Administrator???  So, I then took a closer look at Properties>Security and saw that although Administrator was there, none of the control boxe were x'd out.  Taking a bold move, for me at least, I then did an editing and x'd in the control boxes for Administrator.  Smooth sailing from then on in as everything loaded as it should have.  I think I have finally learned how to "Log in as Administrator."  Nonetheless, if there is anything you can add to this saga, please do.

  • I cant access firefox, everytime i try i get that windows can't find the file, i tried redownloading it but it still gave me the same message?

    i cant access firefox, everytime i try i get that windows can't find the file, i tried downloading it again but it still gave me the same message. the problem has nothign to do with my internet because it wonks on internet explorer and everythign is fine, my computer just can't access firefox for some reason. i tried uninstallign ti adn then installing it again, but that didnt work, i tried installing a different version and it still didnt work.
    okay the exact message is" Windows cannot find 'C:\Program Files\Mozilla Forefox 4.0 Beta 1\firefox.exe'. make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
    Nothing happens after i install is the "Launch Firefox now" checkbox set, the same message comes up.
    i usually start firefox from the shortcut i have on my desktop but when this happened i thought that the shortcut is the problem, but i went to the Mozilla firefox folder and tried it from there, but it didnt work. i also tried downloading different versions of firefox but that didnt work either.

    can you tell me the solution to "windows cant find firefox" error. thanks.

  • I keep getting this window that pops up while surfing Drudge, File not found, Firefox can't find the file at /C:/Program Files/Mozilla Firefox/D èÎß&̪H¿MH¿%1BnàŽ–âPÕ"6´6-%06%1B%0FÜ- ¢Oóü&Ùß%03[Ò–‚Ø%­%1C#%17E±MgÓ˜Û%04goS£‡Å-ovûU%08êïǁÔý„€ÙØ–!gäø½.

    I keep getting this annoying window that pops up while surfing Drudge:
    File not found
    Firefox can't find the file at /C:/Program Files/Mozilla Firefox/D>èÎß&̪H¿MH¿%1BnàŽ–âPÕ”6´6—%06%1B%0FÜ… ¢Oóü&Ùß%03[Ò–‚Ø%­%1C#%17E±MgÓ˜Û%04goS£‡Å…ovûU%08êïǁÔý„€®ÙØ–!gäø½.
    Check the file name for capitalization or other typing errors.
    Check to see if the file was moved, renamed or deleted.
    Do you have any idea how to get rid of this annoying pop-up? I searched for that file name on Google, but nothing came up.
    This only started happening after the Scareware program, Open Cloud Security, infected my computer a few days ago. My wife got into my registry to remove Open Cloud, but now I am left with this annoying Firefox problem. I have to close the annoying window TWICE to get back to Drudge.
    This happens 6 times per hour.
    Thanks

  • My computer has some serious problems, my iphoto only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos has a large delta with a question mark. also I can't back up

    my computer has some serious problems, my iphoto only shows  only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.

    Details please
    What version of iPhoto and of the OS?
    i tried to rebuild my files from folders that had the pics in them.
    Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
    my iphoto only shows  only shows thumb size pics when I try to open them,
    where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
    originally all the photos had a large delta with a question mark.
    Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
    also I can't back up the library file because its not there.
    This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
    By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
    I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
    Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here  --  http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US   --     and   --    http://pondini.org/TM/FAQ.html   ---
    I also lost my Idvd file, only have broken chain showing.
    This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
    LN

  • HT1923 I can't uninstall or update iTunes. I get an error message that it can't find the file itunes64.msi.

    I can't uninstall or update iTunes. I get an error message that it can't find the file itunes64.msi. where is it suppose to be?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

    Summary:
    I have installed Windows 7 Ultimate x64 on my G580.  Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
    Details:
    I bought lenovo G580 with Windows 8.  Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64.  Everything is working fine but my WLAN card is not recognized because of lack of driver.
    The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
    I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error.  I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
    Error -  "BCM4313: Can not find setup file"
    Drivers Tried:
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028105
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028208
    Any help about how to get past this error will be appreciated.  The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder.  Let me know if I can copy a specific file from there.
    Thank you.
    BJS
    Solved!
    Go to Solution.

    Download this driver bcm4313
    Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
    And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

  • I can´t find windows support files for boot camp

    I can´t find windows support files for boot camp

    Boot Camp Assistant
    If you can't download, go to Network control panel and check your settings there, look to see if there is more than one interface listed. And turn off "Auto-proxy setting" and see if that helps, it does in half the cases.
    The only thing really needed would be a small Apple Software Update for Windows program to pull the drivers down while running Windows. Just that one program, which could update itself as happen with 2.0 and 2.1 version.
    As it is, downloads can take 8 hrs for a tiny 620MB package. Strange. True. Been like this.

  • I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

    I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

    So it sounds like you are trying to burn a DVD with photos on it so the photos can be either transferred to or displayed on a Windows PC, is that correct?
    For the purposes of this I am going to assume you are using iPhoto '11.
    Gather the photos you want to burn to DVD in one album in iPhoto. This is not absolutely necessary but it sure makes things easier for me.
    Select that album, then go to the File menu and select Export...
    In the dialog that shows up, select the File Export tab. Select the setting you want to use for export. Click the Export button.
    Another dialog will show up. Set the location to Desktop and click the New Folder button. Name the folder something nice and descriptive and click the Create button.
    Click the OK button. Quit iPhoto as the rest of this work will be done in the Finder.
    You will now have a folder on your desktop with that nice descriptive name. Find it and select it. Go to the File menu and from it select Burn "Descriptive folder name" to Disc...
    Insert a blank DVD when prompted.
    Let the finder complete the work and eject the disc afterwards.
    That's it. Best of luck.

  • Firefox can't find the file at /C:/WINDOWS/system32/oobe/icserror/icsdc.htm

    I deleted a stack of files and must have accidentally deleted this one. I restored my computer and all the other files came back except this one. I uninstalled firefox and reinstalled and still I get Firefox can't find the file at /C:/WINDOWS/system32/oobe/icserror/icsdc.htm
    This version also won't let me use my AVG plug in? Says it's not compatible

    hello tanisha625, it looks like some program has overwritten the default new tab page. you can either install the [https://addons.mozilla.org/firefox/addon/searchreset/ searchreset addon] to get rid of the problem or manually reset the page that opens on each new tab.
    enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up), search for the preference named '''browser.newtab.url''' and double-click & change its value to '''about:newtab'''.

  • My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

    My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message.

    My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Script Alert: can't find .js files even though they're in the folder that the program looked in to?

    I'm new to the whole After Effects community and I am currently using it for a project.
    I followed a tutorial by Mt. Mograph on youtube and I downloaded the script "Ease and Wizz".
    I have it as a panel and all, but every time I attempt to apply my desired expression, a popup box says that there is a script alert and it can't find the file for the expression.
    Is there something that I'm doing wrong? I have tried to remove the script and download it again, but nothing has worked for me.

    Try to copy "easingExpressions" folder that came with the script into this folder:
    C:\Program Files\Adobe\Adobe After Effects CC 2014\Support Files\Scripts\ScriptUI Panels\

Maybe you are looking for