Can't finish install via OTA or delete the firmware update data

After many times trying to download the iOS update, when I was finally able to finish the download, my iPhone 4 rebooted and got stucked in Recovery Mode. iTunes failed to restore it (and it tried to restore to my old iOS version). After several hours trying to fix my gadget, I used a "Recovery Fix" from a third-party software. It worked, my iPhone is iOS 5.1.1, but working.
PROBLEM IS: the 7.0 data is already downloaded. I can even click "Install Now" on the Software Update section of the settings, but it says "An error occurred installing iOS 7.0" right after verifying the update. And I can't delete the download. And it takes me 1,1gb on my 8gb phone.
I have tried to restore it from a backup I had from iTunes, but the firmware data is still there!
Isn't there a way I can finish the update or delete de update data???

Having the exact same problem.

Similar Messages

I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..

Can I delete the Itunes update 10.6 and go back to 1.2?

Can I delete the Itunes update 10.6 and go back to 1.2?

You want to go to iTunes version 1.2? Your iPod will not work with that old of an iTunes version.
You can just uninstall the old version. Google for the old version and install it.

I've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

i've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

I've had all kinds of trouble keeping my iTunes software current over the past year, but have found the easiest way to remedy the issue is to simply download the latest version of iTunes as though I am a first-time user and then just install it into the directory my current version of iTunes is using. Doing this has allowed me to update my software without losing any of my media/data. Hope this helps! Best of luck!!!

FaceTime can't be installed on "Macintosh HD" because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion

FaceTime can’t be installed on “Macintosh HD” because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion.any help with this would be greaty appreciated.

FaceTime is included in Lion. The App Store version is for 10.6. If you deleted it, restore it from a backup, or reinstall the Mac OS.

Plese Help. Me have FAT32 USB, ISO. Boot camp:Can't install Windows Support Software because the Software Update Server "(null)" can't be found. It asks me to network Diagonostics, but internet ok. Plese Help

Plese Help. Me have FAT 32 USB, ISO, Boot cam say can't install windows support software because the software update server "(null)" can't be found.
I know there are many other threads, but I guess I couldn't find clear answer to this problem. Is that the Apple's server problem or just me?
I'm trying to install Windows7 via Bootcamp, with FAT 32 formated USB with ISO, on Macbook air 2012.
Thanks!

The problem is the encryption and how your notebook handles it rather than a Time Capsule problem. I had similar problems until I updated the WLAN drivers on my IBM T41.
The way I convinced myself it wasn't an Apple problem was to connect my IBM T41, via ethernet, to my AEBSn. I was able to connect to internet so I knew it was a conflict between my wireless card and the AEBSn.
I am now using the WPA2 encryption for the AEBS without issue and connecting many different types of hardware; three iPod Touches, two MSI Wind Netbooks (Win XP SP3), one IBM T41 (Win XP SP2) wirelessly and both my 20" iMac and Dell 8250 Win XP (SP2) by ethernet
The MSI Winds are brand new and they would connect to the AEBSn but couldn't get an IP address from the internet (Limited or No Connectivity error message). The AEBSn was using WEP encryption. After doing a little research I found that WEP was a very common cause of this error message so I switched the AEBSn to WPA2 and everything works fine now.
Don't assume that because you can't connect via OPEN it isn't a encryption issue because my Winds wouldn't connect that way either...it wasn't until I changed to the WPA2 Personal that they connected.
You may also need to change the program that handles the WLAN connection, sometimes Windows handles it better but for the newest addition to our household, the MSI Winds, I am using the Realtek utility that matches the WLAN card and everything is hunky dory...
Finally sometimes firewalls will prevent getting the IP address...doesn't happen often but it has happened to me so I would double-check that by turning off the Windows Firewall and just verify that it isn't the firewall (that's never been a problem with my Apple AEBSn but it was a problem with an older Dlink g model).

Illustrator CC 2014 - Message - "Can't finish previewing. Could not complete the required operation."

We have 3 Macs OS 10.7.5, 16Gb and are all using Illustrator CC 2014. Since the Macs upgraded to CC 2014 all are exhibiting the same message, at random during deisgn, "Can't finish previewing. Could not complete the required operation.". At this point clicking on the "OK" button causes the screen graphics to appear in outline mode and unable to access / select any further commands, apart from "close".
Reverting back to the initial CC (which is still installed on the systems) shows no problems in completing the designs. Hence it appears that all the above issues seem apparent only since the latest CC upgrade.
Does anyone have any ideas as to this issue and any possible resolutions.

For the last few months, I've been having the exact same problem and it is driving me CRAZY. I finally contacted Adobe a few weeks ago regarding the issue and they had me clear out my preferences. All seemed fine for a few days... but then it came back again and seems worse now. It happened so often today I lost count. Very frustrating.

FaceTime can't be installed on "Macintosh HD" because the version of OS X is too new

I'm trying to buy the FaceTime app from the App Store but a pop-up window gives me the message, "FaceTime can’t be installed on “Macintosh HD” because the version of OS X is too new." What gives? Does anyone have a solution to this problem?

I forgot to mention that I accidentally deleted the app at one point. It's no longer in my applications folder. That's why I need to download FaceTime from the App Store.

FaceTime can't be installed on "HDD Name" because the version of Mac OS X is too new.

on AppStore it says:
FaceTime can’t be installed on “HDD Name” because the version of Mac OS X is too new.

After upgrading my MacBook to Lion, FaceTime (purchased from the App Store) quit working. It would just hang when I'd hit the button to "Turn on FaceTime".
So from a terminal, I deleted:
/Applications/FaceTime.app/
~/Library/Preferences/com.apple.FaceTime.plist
~/Library/Caches/com.apple.FaceTime/
~/Library/LaunchAgents/com.apple.FTMonitor.plist
/private/var/db/receipts/com.apple.FaceTime.*
Now, when I go to the App Store to install FaceTime, I get the same error as the OP.

I have purchased Acrobat from the Cloud and downloaded and installed it. I received an order number but no serial number and cannot get it to finish installing Where do I get the serial number!?!

I have purchased Acrobat from the Cloud and downloaded and installed it. I received an order number but no serial number and cannot get it to finish installing Where do I get the serial number!?!

Like most online purchases you would normally receive the order number before the order is processed so you should be patient and allow some time for the processing to happen. If you feel you have waited long enough then you should contact Adobe Support directly and try to get information on your order since you now have a reference for it that you can share with them.
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Get chat help with orders, refunds, and exchanges (non-CC)
http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

Can't finish previewing. Could not complete the requested operation

So, I am working on a large and complex document in AI CC 2014, and periodically this message ("Can't finish previewing. Could not complete the requested operation") pops up and drops me into outline mode. I can work around it by hiding some parts of the illustration or changing zoom, so it looks like a resource issue. But what resource? RAM doesn't seem likely: I have 32 GB or memory, 400 GB of free disk space for paging, and the Mac Activity Monitor shows no sign of memory pressure. (Illustrator is only using 1 GB). So what's going on? Is it a graphics hardware issue? I don't have the latest or greatest: my iMac has an AMD Radeon HD 6970M with 1 GB. Is that the problem? Would a new computer help, or is it some internal thing with Illustrator and a new computer would be a waste of money. The error message is completely uninformative as to the cause of the problem. Does Illustrator CC have a log file or any other source of info?
System summary:
Mac Illustrator CC 2014
27-inch iMac, Mid 2011
3.4 GHz Core i7
32 GB RAM; 400 GB Free Disk Space
AMD Radeon HD 6970M 1 GB
Error Message:
"Can't finish previewing. Could not complete the requested operation"

Hikrzy1314
Will it be possible for you to share the source files with [email protected] ?
I would like to have a look into this issue.
Thanks & Regards,
Raghuveer Singh

Can't open the illustration. Can't finish previewing. Could not complete the requested operation.

Recently, I restarted my MAC and I'm not able to place images in AI or open AI files with images.
Sometimes when I do place a jpg, it just shows a box.
Some errors include:
• This file is not readable.
• Can't open the illustration.
• Can't finish previewing. Could not complete the requested operation.

As Monika said, we need info about the file and exact system info. Sounds like the files are damaged or locked at the operating system level, which in turn could indicate file system issues....
Mylenium

Can it please be an option to delete the Apple Watch app, as I will not be forking over hundreds, let alone thousands, to buy a watch

Can it please be an option to delete the Apple Watch app, as I will not be forking over hundreds, let alone thousands, to buy a watch?

You can tell Apple at the link below.
http://www.apple.com/feedback/iphone.html

I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

Why should I have to spend money to solve this problem? Many others have the same concern, Airport Utility 6 does not support older Airport Express units. This is Apple's problem. I've tried many solutions proposed on the net but none worked. I'm still trying for a work around.

Can't finish install via OTA or delete the firmware update data

Similar Messages

Maybe you are looking for