Can't fix I/O Error in Bridge?

Hi
I'm using Mac OSX 10.8.4 running Bridge CS6 5.0.2.4
All tips on forum re updates, patches, restart with option all tried.
AFAIK nothing in Bridge Forum pertaining to a consistent I/O Error I am getting when attempting to output either a PDF gallery or an html gallery from a small number of pdf files.
Ive tried adjusting file number, origin etc - in each case it looks like teh gallery is getting built but then all of a sudden you get a dialog box ith "I/O Error" = Stuck.
Ive uploaded a little movie at which shows the behaviour: http://is.gd/kupeca
Anyone on the Forum have any ideas on how to fix this?
Many Thanks,
Ed.
PS I do have an earlier version of Bridge (CS5.5) on my drive. Should I delete it?
PPS as mentioned have tried everything obvious.

Thanks for the interim suggestions and help.
I followed suggestions re Repair Privileges and other system maintenance ==> Done.
Its a standalone MacBookPro, no network, internal disk.
HD Space = 70.96 Gb free from 500 Gb.
Spec RAM/VRAM =
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.2 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          16 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f4
AMD Radeon HD 6750M:
Chipset Model:          AMD Radeon HD 6750M
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x8
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x6741
Revision ID:          0x0000
ROM Revision:          113-C0170L-573
gMux Version:          1.9.23
EFI Driver Version:          01.00.573
I used my second Adobe copy licence on a different machine (actually installing Bridge CS6 accompanying Premiere Pro). Tried both pdf layout plus web gallery - without problems.
From your advice I am willing to accept this is a "my machine" problem. I will continue tweaking and will report back if I find a solution. I can't see how to do a re-install, other than a complete delete of whats in my Applications folder followed by another download from my Adobe account.
Is this the correct method for de-install/reinstall or should I use something like AppCleaner? ---> Just in case I have lost some critical files along the way, andobviously hoping it might fix it. Its very nice functionality and have many uses for both pdf and web galleries.
Do I need to free up more HD space?
Thanks again for help
Ed

Similar Messages

How can I fix a time error on my MacBook?

How can I fix a time error on my MacBook?

If, after checking the settings in Sys Pref> Date/Time nothing really changes
you could see if a reset of the NVRAM could help.
Read carefully & when using the keyboard sequence, let the computer
start tone sound three times, to be sure the reset has really occurred.
•About NVRAM & PRAM:
http://support.apple.com/kb/HT1379
Does the time gain by itself? Is the Time Server set to automatically
keep the computer time corrected when you are online? You may
also try the manual settings, if the computer had not been used in
some time, because if the battery gets too low, the capacitor in a
portable computer can also lose power, & NVRAM - PRAM chip
settings could be lost. However by then, Date can also be wrong.
Was there anything else going on that may have affected this?
Sometimes odd items are related to something else.
Good luck & happy computing!

How can i fix a 4280 error code when trying to burn cd's on itunes

How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

Did you by chance find out a solution with your problem? I am having the same issue with the same drive. I even uninstalled iTunes and completely reinstalled it.
Thank you for any help anyone can offer. I'm not having any luck finding answers on the net. Thx.

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh

TS3694 how can i fix the itunes error 1638,3194 when i am restoring my ipad 2 wifi?

how can i fix the itunes error 1638.i changed my hosts file but i recive this error again.what can i do?

See Apple support Article
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1638

How can I fix apple tv error "this content requires hdcp for playback"

how can I fix apple tv error "this content requires hdcp for playback" I've done everything suggested in troubleshooting and still my apple tv don't work. I'm thinking on returning it, since it doesn't work.

Welcome to the Apple Community.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports HDCP
Try the Apple TV with another TV

How can I fix my communications error be my HP officejet j6480? The printer still works.

How can I fix my communications error between my Mac OS X and my HP Officejet J6480? My printer still works.

It is an HP Office jet 4635...%help

HT1414 How can I fix a 2001 error code

How can I fix a 2001 error code

This is USB related issue. See these steps for resolution.
http://support.apple.com/kb/TS3694#2000

How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?

The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

What happens if BC can't fix a system error?

I am really concerned about a system error we are getting www.simona.com.au/simona
I posted this a few days ago, have tried deleting catalogs and start again, same error.
Have submitted to BC support, but all I keep getting is "thanks for your patience" messages..
In fact, I am not being patient at all, I am immensely frustrated, embarrassed and impatient!
What I'm really concerned about is, that BC won't be able to fix this system error at all. Where do I go from there?
This is a new client, new website and we were supposed to have finished their e-commerce section this week, but can't go any further until the system error is fixed.. Contacted BC a week ago, but still getting those annoying "thanks for your patience" messages..
I get that they're working on it and they're only human, but what happens if it can't be fixed? Do we just give up and lose thousands of dollars???

What's actually happening? You haven't described your system issue. Someone in the forum community may be able to help troubleshoot it.

How can I fix SMART disk errors?

Ive had SMART disk errors for years now and its not allowing me download maverick or yosimite. I tried to download embroidery software just now and now it says “no file system” or something like that. What do I have to do to finally fix this annoying problem? I have done disk utility repair and I guess that was no go. Can anyone walk me through fixing this or do I have to basically buy a new computer? If its a matter of sifting through data someone can walk me through but if they gotta open up the guts on this thing, then I guess I’m in trouble. Any advice?

zoe2432 wrote:
so all of the problems were due to an apple problem? I guess I missed out on getting them to fix, I never knew about that! How much would you estimate this will cost and would I be better off buying a new Mac- if the cost is nearly the same that is? Thank you so much for the info I really appreciate you!!
Your disk is dying not the entire iMac. The disk can be removed & replaced. The Mac should be able to work again. Disks start at about $50 - so you probably don't need to throw it out just yet
The issue is with Seagate drives that Apple installed. Technically not Apple's fault, but as they sold the hardware they are responsible for product recalls etc.
See if an Apple store can help you.
http://www.apple.com/retail/storelist/

How can I fix a program error so I am able to save files?

My version of Photoshop CS6 is suddenly not allowing me to save any files at all. I can't save .psd, .jpg, .gif, etc. When I try to save it it pops up with a program error message. I haven't had this program very long so I would like to get it fixed so I can start using it. Thanks!

Hello! I'm guessing that you either have allowed Photoshop to use an inadequate amount of disk space, which you can change by going to Edit>Preferences or you have run out of space on the disk you have told Photoshop to use. Either free up space, or, if you have a second hard drive, go to Edit>Preferences and it should be under General. I haven't gone through all of these preferences menus yet, so can't promise you'll find everything there, but you should at least get some leads. I know there are more specific options under preferences, but as I said, I haven't gone through those yet, and don't know where to find disk space options.
Hope this helps!
Cole

Apple Application Support not found and i have re downloaded itunes 4 times how can i fix this issue error code 2

Please i need some help here with this issue i am using a windows 7 acer and i would like to be able to listen to music while im gaming is there anyway i can fix this issue i am having i keep getting Error code 2 (windows error 2)

You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunes installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
See also Troubleshooting issues with iTunes for Windows updates.
tt2

HT201442 how can i fix my iphone error 3194 step by step

i got a problem with 3194 error..Can u tell me how to fix it step by step..Now i can't use my phone..

Make an appointment at any Apple store, as that error is generally a hardware fault error, but can be caused by security software on your computer. Read here:
http://support.apple.com/kb/TS3125
If not security software, make an appointment at any Apple store.

TS3694 how can i fix a 3014 error for the iOS 6 update

I tried to update my iPhone 4 to iOS 6, and when it was restarting, it gave me the option to restore it. When i click restore, it comes up with an message about error 3014. How can this be resolved? Because my phone is now frozen in the restore stage.

thy this article http://lastplaceonthe.net/fix-itunes-error-3014-upgrading-iphone-firmware/
Ryan

Can't fix I/O Error in Bridge?

Similar Messages

Maybe you are looking for