Can't fix runtime error

I'm getting the Visual Runtime error described in the Adobe support section, but none of their DLA stuff applies to me and I'm quite certain I don't have any other programs running that should interfere with it. I have Pro Tools installed, along with a control panel for the audio card it needs, but those and my ATI settings are the only things running when I try to launch it. Any suggestions?
I'm using Windows XP SP2 on a custom-built PC with 1.75 GB RAM and a Athlon 64X2 at 2.4 GHz.

One solution to the C++ Runtime bug is plugin related.
Whenever I see this, I also get a crash to desktop.
However, I stumbled across the solution almost by accident:
Launch Premiere Pro CS3, and the runtime error happens when it hits - for the first time or during a rescan of the folder - certain VST Audio Plugins.
Kontakt 2, Kontakt 2 16-Out, Kontakt 2 8-Out are all guaranteed to trigger this error.
The solution is to keep relaunching until it succeeds - which it will, eventually.
It is the default loading of VST Audio Plugins that seems to cause this as part of the "Media Layer" or whatever it is.

Similar Messages

How to fix runtime error 6025 in iTunes?

How to fix runtime error 6025 in iTunes?

Hey deangelofromtx,
Thanks for the question. I understand that you are experiencing issues with iTunes. The following resource may provide a solution:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

HT201401 how can i fix an error 1601 restore

how can i fix 1601 error on iphone 4

This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

TS1368 how can i fix this error:"please contact itunes support to complete this transaction"

how can i fix this error:"please contact itunes support to complete this transaction"

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.
For iTunes: Apple Support for iTunes - Contact Us

Can I fix this error ?

Hi everyone,
My system: Windows Server 2003 32-bit ; Oracle DB 10.1.0.2.0 ; PT 8.52 ; HCM 9.0 ;
Can I fix this error during DataBase setup or I have to pre-install my system,please help:
Creating Table PSPHYSSCHDEL
- SQL Error. Error Position: 0 Return: 1658 - ORA-01658: unable to create INITIAL extent for segment in tablespace PTAMSG
CREATE TABLE PSPHYSSCHDEL (IB_PACKAGEID VARCHAR2(100) NOT NULL, IB_SCHEMANAME VARCHAR2(100) NOT NULL, IB_VARIANTNAME VARCHAR2(30) NOT NULL, IB_PHYSSCHEMANAME VARCHAR2(30) NOT NULL, VERSION INTEGER NOT NULL) TABLESPACE PTAMSG STORAGE (INITIAL 40000 NEXT 100000 MAXEXTENTS UNLIMITED PCTINCREASE 0) PCTFREE 10 PCTUSED 80
Error: Unable to process create statement for PSPHYSSCHDEL
SQL Spaces: 0 Tables: 1163 Triggers: 0 Indexes: 1370 Views: 0
Ended: Fri Aug 17 12:20:04 2012
Unsuccessful completion
I try to
Before the installation I want to create a DEMO DB but the Next button stays gray and I don't have software to add.
Thats why I'm creating SYSTEM DB.
Please help .

When you ran the XXDDL.SQL (where xx stand for the application you are installing) it created the tablespaces.
You had the option to autoextend the tablespaces.
See this file and remove all remarks in the scrript for the lines like this.
REMARK ALTER DATABASE DATAFILE '<drive>:\oradata\<SID>\ptamsg.dbf'
REMARK AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED
to
ALTER DATABASE DATAFILE '<drive>:\oradata\<SID>\ptamsg.dbf'
AUTOEXTEND ON NEXT 5M MAXSIZE UNLIMITED
log in a sysdba
and run the alter statements.

How can i fix the Error "The application failed to initialize properly (0xc00001d)...."

How can i fix the error "The application failed to initialize properly(0xc00001d). Click Ok to terminate the application"?
I've tried to re-install twice the program and also restarted my PC several times and it still shows this error whenever i try to run it.

Read the other threads on the same topic, or just install the 12.0.1 update.

Can I fix the error "GoldImageImportNotAllowed" at Import RemoteApp template iamge ?

Can I fix the error "GoldImageImportNotAllowed" at Import RemoteApp template iamge ?
I want to import to Azure RemoteApp template from Azure Virtual Machine image builded by "Windows Server Remote Desktop Session Host" gallay image.
Error:
"Could not import RemoteApp template image apptemplate1."
"GoldImageImportNotAllowed"
Prepare:
Azure Virtual Machine Image build by "Windows Server Remote Desktop Session Host" gallay image.
Step:
step 1. select "TEMPLATE IMAGES"
step 2. select "ADD"step 3. select "Import an image from your Virtual Machines Library" in page 1 on "ADD REMOTEAPP TEMPLATE IMAGE"
step 4. select Virtual Machine Image in page 2.
step 5. select "I CONFIRM THAT I FOLLOWED THESE STEPS TO CREATE MY IMAGE:" in page 2.
step 6. input "NAME" in page 3.
step 7. select "Japan West" for location in page 3.
Regards,
Yoshihiro Kawabata

I've waited 24hrs and i'm still getting the GoldImageImportNotAllowed error. Can anybody suggest anything else? as far as I can see the image is all fine, it was based on the RemoteHost template, and it has been sysprepped etc. I really need this to work,
as my trial is running out and I want to demo this before it ends.
Thanks in advance

How to fix" RUNTIME ERROR"

Hi everyone
I have EASYSIGN version 5 signmaking program installed on Windows XP and have been using it for a number of years
without any problems untill know.
Everytime I want to use the Compatibility to open Adobe illustrator cs2 on my Easysign I encounter a RUNTIME ERROR reading.
Therfore cannot open my documents in that file to work on the jobs store in that file.
Also cannot access my documents comes up "ACCESS DENIED"
Can anyone help.. desperate to carry on working with this program

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Problem updating itunes, now I can not access, Runtime error R6034 using windows 7

I need some assistance.
I am trying to update itunes on my computer. I am getting a message which reads: errors occurred while installing the updates.
I can not access itunes at all now.
Also i am getting an error when I open windows which reads:
Runtime Error!
an application has made an attempt to load the C runtime library incorrectly.
please contact the applications support team for more information.
How do I fix this?

Hello there, Duane Harris.
The following Knowledge Base article provides in-depth troubleshooting steps for resolving your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How can I fix a Error 10016 invalid read count in Labview

This is an occasional error that crashes my program, but I'm not sure how to fix it, or if it can be fixed. The error is unpredictable when it will occur.

Without seeing your code, or knowing more about the problem, you probably aren't going to get an answer.
I can suggest the following: isolate the error. Put in an error handling subVI that will isolate this error to a specific location. This is going to take some work on your part, and will likely be difficult.
To get you in the right direction, I believe that this is caused when data is being read. This may be because the amount of data you request to be read does not equal what is in the buffer. This can be for a lot of reasons. If you have trouble isolating the problem, try changing your read scheme. Perhaps a circular buffer would work. There are examples in the Examples Database in LabVIEW on how to do this.

How can I fix an error message saying, "This operation has been cancelled due to restrictions in effect on this computer " when I try to open a webpage from a hyperlink in Outlook?

When I click on a hyperlink in an email (Outlook), I get the error message "This operation has been cancelled due to restrictions in effect on this computer " and it won't open the hyperlink. None of my Outlook settings are blocking the hyperlink. How can I fix it?

When I click on a hyperlink in an email (Outlook), I get the error message "This operation has been cancelled due to restrictions in effect on this computer " and it won't open the hyperlink. None of my Outlook settings are blocking the hyperlink. How can I fix it?

How can I handle runtime errors in Java

Please some one tell me what are runtime errors and How can I handle them using java code
This is important
Thanks in Advance
Chowdary AK

The java equivalent of function pointers is the one-instance class, as used to pass handlers to swing components, for example. Often an anonymous class is used.
Put your function signature in an interface, and pass an object that implements that interface:
public Class1 {
public interface CallBack {
    void myMethod(String arg1);
CallBack callb;
public Class1(CallBack callb) {
   this.callb = callb;
callb.myMethod("A string");
class2 {
   first = new Class1(new Class1.CallBack() {
     public void myMethod(String arg1) {
       ... do something ...

How can I fix IPRIP errors?

I have 6x computers (all Win7) all connecting to a Cisco-Linksys WRT110 (fw v1.0.07) which I have tried to configure as a wireless access point to our office network. So far I have just disabled DHCP and it seems to work well except the system event logs of the computers connected via this access point are full of IPRIP event 29031 errors. This does not occur on those connected directly to the office network.
How can I fix this?
Nat is enabled and Dynamic Routing (RIP) is disabled - should I change either of these?
Solved!
Go to Solution.

Setting the router as an access point would now eliminate the router functionalities such as: being a DHCP server, a firewall and the ability to filter the packets. According to link: http://forums.techguy.org/windows-xp/405721-solved-iprip-services-configuration-xp.html; there’s a possibility that IPRIP may be a backdoor Trojan. As such, you might need to check on your main router’s logs for possible information about this error.

How Can I fix This Error....?? Please Help !!

Hi,
I can't seem to figure out how to fix an error I keep on getting. Here is the error:
C:\Documents\LZW.java:171: cannot resolve symbol
symbol : class BitOutputStream
location: class LZW
          os = new BitOutputStream(os) ;
^
C:\Documents\LZW.java:199: cannot resolve symbol
symbol : class BitInputStream
location: class LZW
          is = new BitInputStream(is) ;
^
2 errors
Tool completed with exit code 1
How would I go about solving this error?
Thanks alot

Hi,
Here's the full coded file: If you copy and paste it and compile it, you will see those errors.... Thanks
import java.io.* ;
import java.util.* ;
public class LZW implements Compress
          class ByteArray {
               final byte[] arr ;
               ByteArray(byte[] b)
               { arr = (byte[]) b.clone() ; }
               ByteArray()
               { arr = new byte[0] ; }
               ByteArray(byte b)
               { arr = new byte[] { b } ; }
               public boolean equals(Object o)
     { ByteArray ba = (ByteArray) o ;
               return Arrays.equals(arr,ba.arr) ; }
     public int hashCode()
               { int code = 0 ;
               for (int i=0;i<arr.length;++i)
                    code = code*2+arr[i] ;
               return code ;     }
               int size()
               { return arr.length ; }
               byte getAt(int i)
               { return arr[i] ; }
     public ByteArray conc(ByteArray b2)
               { int sz = size()+b2.size() ;
               byte[] b = new byte[sz] ;
               for (int i=0;i<size();++i) b=getAt(i) ;
               for (int i=0;i<b2.size();++i) b[i+size()]=b2.getAt(i) ;
               return new ByteArray(b) ; }
     public ByteArray conc(byte b2)
               { return conc(new ByteArray(b2)) ; }
               public byte[] getBytes()
               { return (byte[]) arr.clone() ; }
          public boolean isEmpty()
               { return size()==0 ; }
               class Dict {
                    Map mp = new HashMap() ;
          List ls = new ArrayList() ;
          public void add(ByteArray str)
               { mp.put(str,new Integer(ls.size())) ;
               ls.add(str) ;     }
          public final int numFromStr(ByteArray str)
               { return ( mp.containsKey(str) ?
                         ((Integer)mp.get(str)).intValue() :
                         -1 ) ; }
          public final ByteArray strFromNum(int i)
               { return ( i<ls.size() ?
                         (ByteArray) ls.get(i) :
                         null ) ; }
          public final int size()
               { return ls.size() ; }
     class LimitedDict extends Dict {
          int maxSize ;
          LimitedDict(int maxSize)
               { this.maxSize = maxSize ; }
          public void add(ByteArray str)
               { if (size()<maxSize)
                    super.add(str) ; }
     Dict dict ;
          byte[] buf ;
     final ByteArray emptyBA = new ByteArray() ;
     ByteArray w=emptyBA ;
     public LZW(int numOfBits)
                    if (numOfBits< 9) numOfBits=9 ;
          if (numOfBits>16) numOfBits=16 ;
                    buf = new byte[numOfBits] ;
                    dict = new LimitedDict(1<<numOfBits) ;
                    for (int i=0;i<256;++i)
               dict.add(new ByteArray((byte)i)) ;
          int encodeOneChar(int n) {
          byte c = (byte) n ;
          ByteArray nw = w.conc(c) ;
          int code = dict.numFromStr(nw) ;
          if (code!=-1) {
               w = nw ;
               return -1 ;
          } else {
               dict.add(nw) ;
               nw = w ;
               w = new ByteArray(c) ;
               return dict.numFromStr(nw) ;
     int encodeLast() {
          ByteArray nw = w ;
          w = emptyBA ;
          return dict.numFromStr(nw) ;
     void writeCode(OutputStream os, int code) throws IOException
          for (int i=0;i<buf.length;++i)
               buf[i] = (((1<<i)&code)>0?(byte)1:(byte)0) ;
          os.write(buf) ;
     int readCode(InputStream is) throws IOException
          if (is.read(buf)<buf.length)
               return -1 ;
          int ret = 0;
          for (int i=0;i<buf.length;++i)
               ret |= ((int)buf[i])<<i ;
          return ret ;
     public void encode(InputStream is, OutputStream os) throws IOException {
          os = new BitOutputStream(os) ;
          int next ;
          int code ;
          while ((next=is.read())>=0) {
               code = encodeOneChar(next) ;
               if (code>=0)
                    writeCode(os,code) ;
          code = encodeLast() ;
          if (code>=0)
               writeCode(os,code) ;
os.flush() ;
     ByteArray decodeOne(int code) {
          ByteArray str = dict.strFromNum(code) ;
          if (str==null) {
               str = w.conc(w.getAt(0)) ;
               dict.add(str) ;
          } else
               if (! w.isEmpty())
                    dict.add(w.conc(str.getAt(0))) ;
w = str ;
          return w ;
     public void decode(InputStream is, OutputStream os) throws IOException {
          is = new BitInputStream(is) ;
          ByteArray str ;
          int code ;
          while ((code=readCode(is))>=0) {
               str = decodeOne(code) ;
               os.write(str.getBytes()) ;

How to i fix runtime error r6034?

I have an HP 625 laptop with windows 7 installed. I have just ran the latest itunes update and now I am unable to open itunes. The following message shows:
Runtime Error!
Program C:\Program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly
Please contact the applications support team for more information
Can somebody help please?
Thanks

See Troubleshooting issues with iTunes for Windows updates.
tt2

Can't fix runtime error

Similar Messages

Maybe you are looking for